cherumu kku kudivella padhathy

electrical

OD417520/2025-2026:Supply of 3 phase, 5 HP/3.7 KW, 6 stage, open well vertical submersible motor pump set capable to discharge 250 LPM at 52 mtr and 75 LPM at 116 mtr head, (minimum head range 29 to 116mtr) 50 mm delivery, 415 V, 50 Hz, AC supply. EKKI :VOS-5DX/6 /Deccan/Texmo or equivalent approved make)

90.14.24.2:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.2 KVAr, 3 phase, 440 V, delta connected standard duty Metalised Poly Propylene Capacitor, Cylinderical Type, suitable for direct connection to motors.

OD417531/2025-2026:Supply and providing three phase submersible pump controller with ammeter, voltmeter, push button, contactor and O/L relay etc with additional dry run protector suitable for 5/7.5 HP phase submersible pump. ( L&K MU-G7.5 DOL or equivalent make)

OD417534/2025-2026:Supply and providing 50 mm (2") size, heavy duty, Top and Bottom column pipe adapter set suitable for bore well submersible pump set as required.

OD417535/2025-2026:Supply and providing 50 mm (2") size, standard duty (Red) column pipe of 3 mtr length,for bore well submersible pump as required.

OD417508/2025-2026:Supply, threading and providing 65 mm dia medium class G.I. pipe in position with accessories like coupling, x-nipple, reducer etc. for extending as required.

OD417517/2025-2026:Supply and providing 65 mm size screwed /flanged end type Gunmetal horizontal Non-return valve in position as required.

OD417512/2025-2026:Supply and providing 65 mm size medium class G.I. bend in position with accessories as required

OD417518/2025-2026:Supply and providing 65 mm size heavy duty GI Flange coupling in position as required.

OD417510/2025-2026:Supply and providing 65 mm x 15 mm OR equal size medium class G.I. Tee in position with accessories as required

OD417514/2025-2026:Supply and providing industrial type pressure gauge with gun metal / brass vales in position as required.

90.6.10.2:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required25 mm

OD417516/2025-2026:Supply and providing 14 mm size nylon marine rope (white/green) for hanging the pump set in well, tying with an out side object as required.

1.17.31:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 6 sq. mm

90.6.6.4:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.6 sq mm

OD417511/2025-2026:Labour charges for conveyance fixing, lowering and erection of 5 hp vertical open well submersible motor pump set in well with power cable connections, delivery pipe, nylon rope, trial run, dismantling the connections in panel board, re-arranging connections through COS etc as required.

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli Amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps

2.3.2:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way, Double door

2.13.1:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

OD417550/2025-2026:Supply and providing 4 pole enclosure for independent mounting of MCB/RCCB/Isolator etc. as required.

90.12.9.2:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size

90.6.10.1:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

OD417519/2025-2026:Supply and providing Test joint for earthing made up of 2 nos, 25x5 mm GI strip, 25 cm long placed on either sides of earth leads and watering pipe, bending, drilling and tightening with 4 sets of brass/SS nut, bolt, washer etc as required.

5.9:Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

90.16.2.1:Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.15.mm dia. G.I pipe ( medium class)

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

OD417513/2025-2026:Supply and providing 25X6 mm brass bolt and nut with washers on the existing MS box/earth bus etc as required including drilling necessary holes as required.

OD417515/2025-2026:Supply and providing the following size of bolt & nut with washers on the existing MS boxes/ earth bus etc as required including drilling necessary holes as required. 12x3mm brass nut & bolt.

90.3.17.2:Supply, conveyance and erection of the following sizes of 'B' class GI pipe in single section for post top lantern of all types on concrete base (excluding charges for concrete base and excavation) and painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer etc. as required.40 mm dia GI pipe

OD417597/2025-2026:Supply and installation of dust and vermin proof wall mounting SMC Meter box suitable for fixing KSEB Meter, cut out Neutral link etc, hinged door construction for the front side , providing vision panel, for the meter compartment, knock out for cable entry and exit. GS-MB 6535 (inside 650x350x250mm) Sintex or its equivalent

OD417599/2025-2026:Supply and fixing the following accessories in the existing meter board and giving connnections etc.(32A,HRC Fuse Base with HRC Fuse link)

OD417600/2025-2026:Supply and fixing the following accessories in the existing meter board and giving connections etc.(32A,415V 2 way neutral link mounted on DMC/SMC base)

OD417553/2025-2026:Charges for preparation and submitting application with test report for KSEB connection/shifting/additional load etc as required.