Construction Work of Water Room & Control Room at Various Location in Bardoli, Di. Surat Under 15th Finance Commission Grant Year 2022-23 (Tied)

NAME OF WORK :- CONSTRUCTION WORK OF WATER ROOM & CONTROL ROOM

LOCATION :- AT VARIOUS LOCATION IN BARDOLI, DI. SURAT

TOTAL AMOUNT PUT TO TENDER

TOTAL AMOUNT PUT TO TENDER

PERCENTAGE RATE TENDER

Sr.No. Schedule Amount

1 Schedule - "B"- 1

2 Schedule - "B"- 2

Total Amount Rs.

Total Amount Rs.

I/We am/are willing to carry out the work @ ________% Above /

Below_____________Percentage (should be writen in figures and words) of the Estimated rates

mentioned above amount of my / our Tender works out as under.

Estimated Amount Estimated Amount

Put to Tender Rs.21,83,626.00 Put to Tender Rs.21,83,626.00

Add %Rs. Deduct %Rs.

Total Rs. Total Rs.

(In Words (In Words

Stamp with Signature of Contractor

Consl.Engineer Engineer

"DESIGN POINT" Bardoli Nagarpalika

Chief Officer President

Bardoli Nagarpalika Bardoli Nagarpalika

Bardoli Bardoli

BARDOLI NAGARPALIKA - BARDOLI

DIST :- BARDOLI

SCHEME - 15TH FINANCE COMMISSION GRANT YEAR 2022-23 (TIED)

NAME OF WORK :- CONSTRUCTION WORK OF WATER ROOM & CONTROL ROOM

LOCATION :- NEAR STATION ROAD ESR , TA- BARDOLI

SCHEDULE - "B-1"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Demolition including stacking of serviceable materilas and disposal

of unserviceable materials with all lead and lift. (i) R.C.C. work 12.50 ₹ 1,110.75 Cumt. ₹

Demolition of Brick work and stone masonry including stacking of

serviceable materilas and disposal of unserviceable materials with 71.30 ₹ 577.92 Cumt. ₹

all lead and lift.(ii) In Cement Mortar

Excavation for foundation upto 1.5M depth including sorting out

and stacking of useful materials and disposing of the excavated stuff 20.30 ₹ 123.13 Cumt. ₹

up to 50M. Lead (A) Loose or soft soil

Excavation for foundation 1.5M to 3 mt depth including sorting

out and stacking of useful materials and disposing of the excavated 6.75 ₹ 136.47 Cumt. ₹

stuff up to 50M. Lead (B) Loose or soft Soil

Providing and laying cement concrete 1:3:6 ( 1 cement : 3 coarse

sand : 6 hand broken stone aggregate 40mm nominal size ) and

curring complete excluding cost of formwork in (a) Foundation and

Earthwork for embankment including breaking clods, dressing with

all lead and lift (excluding watering and consolidation) (C) From 16.00 ₹ 157.91 Cumt. ₹

Borrow area within 1.0 Km.lead

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not exceeding

20 cm. in depth consolidating each disposited layer by

ramming and watering.

Providing and filling rubbles including hand packing and filling

interstices with quarry spalls 20.00 ₹ 1,094.11 Cumt. ₹

Providing & Laying controlled cement concrete M-250 and curing

complete including the cost of formwork and Excluding the cost of

reinforcement for reinforced concrete work in (A) Foundation 4.60 ₹ 4,203.62 Cumt. ₹

footing base of column and mass concrete

Providing & Laying controlled cement concrete M-250 and curing

complete including the cost of formwork and exluding the cost of

reinforcement for reinforced concrete work in Beam (C) Slabs, 7.70 ₹ 6,433.70 Cumt. ₹

Landings, Shelves, Balconies, Lintel, Beams, Girders and

Cantilever upto floor two level. G.F.

Item No. & Description Quantity Rate Per Amount

Providing & Laying controlled cement concrete M-250 and curing

complete Including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in Lintel (C) Slabs, 0.60 ₹ 5,928.70 Cumt. ₹

Landings, Shelves, Balconies, Lintel, Beams, Girders and

Cantilever upto floor two level. G.F.

Providing & Laying controlled cement concrete M-250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in Column (D) 1.30 ₹ 7,280.08 Cumt. ₹

Columns, Pillars posts and struts upto floor two level G.F.

Providing & Laying controlled cement concrete M-250 and curing

complete Including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in Slab (C) Slabs, 8.60 ₹ 6,811.44 Cumt. ₹

Landings, Shelves, Balconies, Lintel, Beams, Girders and

Cantilever upto floor two level. G.F.

Providing TMT Bar FE 500D reinforcement for R.C.C. work

including bending, binding and placing in position complete upto 1928.00 ₹ 77.29 Kg. ₹

floor two level G.F.

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(A) Modular 8.20 ₹ 4,596.11 Cumt. ₹

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) 22.80 ₹ 4,874.33 Cumt. ₹

Conventional + Extra for brick work in superstructure above plinth

level upto floor two level (a) Modular

Providing 15 mm thick cement plaster in single coat on fair side

brick/concrete wall for interior plastering up to floor two level

finished even and smooth in with Floating coat of neat cement. (i)

cement Mortar 1:3 (1 cement : 3 Sand)

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering upto floor two level and

finished even and smooth in (i) Cement mortar 1:3 (1-cement:3- 48.80 ₹ 148.66 Sqmt. ₹

sand) Extra over items 58 to 64 for finishing with a floating coat of

neat cement slurry.

20 MM thick sand faced cement plaster on walls upto height

10meters above ground level consisting of 12 MM thick backing

coat of Cement Mortar 1:3 (1-Cement : 3-Sand) and 8MM thick 155.00 ₹ 347.42 Sqmt. ₹

finishing coat of Cement Mortar 1:1 (1-Cement : 1-Sand) etc.

Item No. & Description Quantity Rate Per Amount

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 (1 cement 6 coarse sand) on

new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing & cleaning the

surface etc. complete for light shade

Providing and laying Dark Telephonic Grey & All Other Available

Option of Granite Slab 1 side Polished 18 mm thick in Door,

Window risers of steps,skirtingDedo and pillars laid on 10mm thick

cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray

cement slury mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete.

Providing throating of plaster drip and moulding to R.C.C. Chhajja.

Providing wood work in frames of Doors, windows cleare story

windows and othersimilar works wrought, framede and fixed in 11.00 ₹ 610.23 10 Cudm. ₹

position. (A) Indian Teak Wood

Provoding and fixing flush door shutters, solid core construction

with frame of first class hardwood with cross board and face veneer

or plywood face panels, including anodised alluminium butt hinges

with necessary screws. (B) Non-decorative type and block board 6.60 ₹ 1,829.74 Sqmt. ₹

core anodised alluminium butt hinges in flush door shutters (2)

Providing and fixing window having extruded aluminum Colour

anodized section frame main outer size 95mm x 24mm x 1.17mm

(of Jindal Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three

track member size 92mm x 31.75mm x 1.30mm (of Jindal Section

no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x

31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt)

with sliding shutters of horizontal member size 40 mmx18mm 3.10 ₹ 1,583.95 Sqmt. ₹

x1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical

member of size 40mm x 18mm x 1.29 mm (of Jindal Section

no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per

Providing and fixing M.S. grills of required pattern to wooden

frames of windows etc. with M.S. flats at required spacings and

frame alround, square or round bars with round headed bolts and 598.80 ₹ 160.85 Kg. ₹

nuts or by screws (B) Ornamental Grill.

Providing and fixing 0.90 mt height stainless (304 Grade) steel stair

railling by top rail of 50mm dia.x16G pipe providing vertical

support of 32x32 Sq. x 16G Pipe and Hori. Supports Pipe of 16mm

x 16G 4 No. Row including grinding, cleaning and filling the 12.00 ₹ 6,470.06 Rmt. ₹

welded spots with SS finish and including of labour transportation

loading, unloading and all tex etc. complete.

Item No. & Description Quantity Rate Per Amount

Applying priming coat over new steel and other metel surface after

and including preparing the surface by throughly cleaning,

oil,grease, dirt and other foreign matter and scoured with brushes 20.00 ₹ 36.74 Sqmt. ₹

fine steel wood, scrapers and sand paper with ready mixed priming

paint brushing red lead.

Painting two coats (excluding priming coat) on new steel and other

metal surface with enamel paint, brushing, interior to give an even

shade including cleaning the surface an even shade including 20.00 ₹ 92.20 Sqmt. ₹

cleanicn the surface of all dirt, dust and other foreign matter.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

mm diameter with jali of the following nominal diameter of self

cleansing design with C.I scread down or hinged grating including 2.00 ₹ 599.64 No. ₹

the cost of cutting and making good the walls.

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm

size (inside) with standard weight.(i) Square mouth traps. (A) 1.00 ₹ 1,292.19 No. ₹

100mm x 100mm size P type.

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with briocks having croshing strength

not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total weight of cover

with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt.

of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- 1.00 ₹ 2,932.93 No. ₹

coarse sand :4-graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on walls and

bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm

and 450mm deep for single pipe line.

Providing and fixing screw down bib taps of following size. (A)

Brass screw down bib tap polished bright. (i) 15mm dia.

Providing and fixing washbasin with single hole for pillar tap with

C.I. or M.S. brackets painted white including sutting holes and

making good the same but excluding fittings.(A) Vitreous China:(ii) 1.00 ₹ 1,533.32 No. ₹

Flat Back washbasin 550 mm x v 400mm size. (i) In white colour.

Providing erecting and fixing double coated (ISI) water tank of

required capacity each with all necessary fittings and connection etc. 2500.00 ₹ 3.95 Liter ₹

complete on terrace.

Item No. & Description Quantity Rate Per Amount

Providing, laying and jointing in true line and level 110 diametre

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage system pipe line,

pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size 110 mm 15.00 ₹ 878.57 Rmt. ₹

diametre x 149 mm length x 145 mm heigh at every 2000 mm center

to center or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including testing of pipes

and joints and jointed with adhesive solvent cement including cost

of all materials. ( 110mm Dia)

Providing laying and jointing in true line and level 15mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be concelled 25.00 ₹ 72.65 Rmt. ₹

as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost

of all materials. ( 15 mm Dia )

Providing laying and jointing in true line and level 25mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be concelled 20.00 ₹ 91.84 Rmt. ₹

as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost

of all materials. ( 25 mm Dia )

Providing, laying and jointing in true line and level 160 diametre

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage system pipe line,

pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size 160 mm 10.00 ₹ 834.38 Rmt. ₹

diametre x 210 mm length x 196 mm heigh at every 2000 mm center

to center or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including testing of pipes

and joints and jointed with adhesive solvent cement including cost

of all materials.

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an even

shade including throughly brushing the surface free from mortar 285.10 ₹ 83.36 Sqmt. ₹

droppings and other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete

Item No. & Description Quantity Rate Per Amount

Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5 sq. mm

& earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 kv

grade FRLS PVC insulated multi strand copper wires upto max

length of 10 mt, in below type of pipe erected with 6A Tissino

Type ISI marked flush type switch / bell push and accessories

erected on Metal / PVC/Wooden Box covered with 3 mm thick

PC(Polycarbonate) /Acrylic/Laminated sheet. with necessary Lamp

holder/ceiling rose / H.D.Connector as directed. (b) with 16 Swg (

1.6 mm) HGS metal Conduit Pipe and assessories painted black

erecting flushed on wall/ceiling complete.

Point wiring for Independent 6/16 plug and 16A with 2- 4 sq. mm

& earth wire of 2.5 sq. mm (green) both are of ISI marked 1.1 kv

grade FRLS PVC insulated multi strand copper wires upto max

length of 10 mt, in below type of pipe erected with 6A Tissino

Type ISI marked flush type switch / bell push and accessories

erected on Metal / PVC/Wooden Box covered with 3 mm thick 3.00 ₹ 712.05 Point ₹

PC(Polycarbonate) /Acrylic/Laminated sheet. with necessary Lamp

holder/ceiling rose / H.D.Connector as directed. (b) with 16 Swg (

1.6 mm) HGS metal Conduit Pipe and assessories painted black

erecting flushed on wall/ceiling complete.

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to

IS: 513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium

casted body with company mark/name 160V to 270V,Power Factor

more than 0.95, THD < 15 %,CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt ,LED driver efficiency > 85 %( fitting

required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the

(A) Square/ Circular shaped Surface/RecessedMount Downlight

with provision for spring loaded mounting clips complete.IP20, (iv) 10.00 ₹ 758.51 Each ₹

Supplying and erecting approved make oscillating type medium

duty bracket fan with Aluminium Blades A.C. 23OV. 50cy/s, with

thermal over load protection wall mounted with height adjustment

and rotary tilting device complete with guard, pull cord for

speedand oscillation flexible Core plug top complete erected with

lead wires as directed. (a) 450mm

Supplying & erecting approved make low noise decorative exhaust

fan having square frame ABS body with inbuilt lowers & square 2.00 ₹ 1,366.53 Each ₹

frame. 200mm with 1350 RPM

Supplying & erecting reverse osmosis (RO) water purification

system with M.S. powder coated pedestal frame, prefilter housing

carbon filter suitable buster DC pump, auto low & high pressure

switches with following size of LPH capacity & erected as directed

Item No. & Description Quantity Rate Per Amount

[E] 200 LPH with 1phase/3phaseRawwater pump of 1000LPH @

2.5kg/cm2 (1N0 Kirloskar /CRI /Lubi) , Dual media filter 10"x54"

(1No) ,Micron catridge filter 20" x 2.5"- (1 No), High pressure

pump1000 LPH@10kg/cm2 (1 No- Shimge /CRI /Lubi) , RO 1.00 ₹ 93,468.43 Each ₹

Membrane housing with RO membrane of 40 * 40- ( 1 No), RO

pressure tube 4" x 1E - (1No), 1200 LPH Rota meter- (2 Nos).

Recovery Rate 50%

Providing & Erecting full SS Body (SS 304) Split type water cooler

having storage capacity 160 to 175 Ltr.(Tank SS 304) & Cooling

capacity 150 ltr. Per hour @ an ambient temp of 350 C.The outlet

temp. of the water should drop by 150C within a hour,The water

cooler should be comprising of hermetically sealed

Reciprocating compressor with R134A, fan motor, Copper

Condensing unit with company fabricated Outdoor Unit water tank 1.00 ₹ 61,115.10 Each ₹

surrounded by evaporating coil, thermostats, relay etc.complete with

necessary copper tube & Insulation, M.S Chanel Stand with

Painting for water tank & M.S. Powder Coated Stand for Outdoor

unit with Installation. With DPELCB and 4 Way DB Box with

accessory Three core Cord for connection.

Providing and Fixing Aluminium Composist Panel (ACP) PVDF

Coating 4mm Thick Wih Aluminium Section of sutable to exising

Masonary/R.C.C. Wall or Componentas per detail design incl.Cost

of all Materials ,Labour ,erection charge, Trasportation, Loading, 12.69 ₹ 2,173.52 Sqmt ₹

Unloading, all taxes,etc.Complete as per design, approved

shed.With sealing joints by silicon.The Work carried out as per

directed by Engineer-in-charge.

Providing & Erecting Board Full body 4 mm thick Acrylic Material

Round type Bardoli Nagarpalika Logo on front side of gate with dia

of 30" with approved design. incl. cost of all Materials, Labour,

erection charge, Trasportation, Loading, Unloading, all taxes, etc. 1.00 ₹ 30,300.00 Each ₹

complete work carried out as per directed by Engineer-in-charge.

Providing & Erecting Board Full body 4 mm thick Acrylic Material

3D Box Letters on front side of gate Letter size of 15" Height &

appropriate width with approved design. incl. cost of all Materials,

Labour, erection charge, Trasportation, Loading, Unloading, all 450.00 ₹ 126.25 Sqinch ₹

taxes, etc. complete work carried out as per directed by Engineer-in-

Providing, Supplying and Installation Digital Advertisement Board

P4 or P3 Outdoor, LED Video Controller, Stablizer 5KVA 1.00 ₹ 1,51,500.00 Nos ₹

Including Loading Unloading And Customized Display Size

Item No. & Description Quantity Rate Per Amount

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed/vibrarted by mechanically and as per approved

design confirming to IS 15658:2006 including 35mm Sand layer

for levelling and filling the joint with sand in proper line and level

Total Amounts Rs…............ ₹

Total Amounts Rs…............ ₹

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Bardoli Nagarpalika

Chief Officer President

Bardoli Nagarpalika Bardoli Nagarpalika

Bardoli Bardoli

BARDOLI NAGARPALIKA - BARDOLI

DIST :- BARDOLI

SCHEME: 15TH FINANCE COMMISSION GRANT YEAR 2022-23 (TIED)

NAME OF WORK :- CONSTRUCTION WORK OF WATER ROOM

LOCATION :- ABHIRAM GARDEN , TA- BARDOLI

SCHEDULE - "B-2"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Demolition including stacking of serviceable materilas and disposal

of unserviceable materials with all lead and lift. (i) R.C.C. work 2.10 ₹ 1,110.75 Cumt. ₹

Demolition of Brick work and stone masonry including stacking of

serviceable materilas and disposal of unserviceable materials with 8.10 ₹ 577.92 Cumt. ₹

all lead and lift.(ii) In Cement Mortar (A) Loose or soft soil

Excavation for foundation upto 1.5 m depth including sorting out

and stacking of useful materials and disposing off the excavated

stuff upto 50 Meter lead .(B) Dense or Hard soil (EXECUTED

WITH MANUAL LABOUR)

Providing and laying cement concrete 1:3:6 ( 1 cement : 3 coarse

sand : 6 hand broken stone aggregate 40mm nominal size ) and

curring complete excluding cost of formwork in (a) Foundation and

Earthwork for embankment including breaking clods, dressing with

all lead and lift (excluding watering and consolidation) (C) From 8.60 ₹ 157.91 Cumt. ₹

Borrow area within 1.0 Km.lead

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not exceeding

20 cm. in depth consolidating each disposited layer by

ramming and watering.

Providing & Laying controlled cement concrete M-250 and curing

complete including the cost of formwork and Excluding the cost of

reinforcement for reinforced concrete work in (A) Foundation

footing base of column and mass concrete

Providing & Laying controlled cement concrete M-250 and curing

complete including the cost of formwork and exluding the cost of

reinforcement for reinforced concrete work in Beam (C) Slabs, 1.80 ₹ 6,433.70 Cumt. ₹

Landings, Shelves, Balconies, Lintel, Beams, Girders and Cantilever

upto floor two level. G.F.

Providing & Laying controlled cement concrete M-250 and curing

complete Including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in Lintel (C) Slabs, 0.20 ₹ 5,928.70 Cumt. ₹

Landings, Shelves, Balconies, Lintel, Beams, Girders and Cantilever

upto floor two level. G.F.

Item No. & Description Quantity Rate Per Amount

Providing & Laying controlled cement concrete M-250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in Column (D) Columns, 0.70 ₹ 7,280.08 Cumt. ₹

Pillars posts and struts upto floor two level G.F.

Providing & Laying controlled cement concrete M-250 and curing

complete Including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in Slab (C) Slabs, 4.60 ₹ 6,811.44 Cumt. ₹

Landings, Shelves, Balconies, Lintel, Beams, Girders and Cantilever

upto floor two level. G.F.

Providing and laying controlled cement concrete M.200 and curing

complete Including the cost of formwork and reinforcement for 0.40 ₹ 7,409.36 Cumt. ₹

reinforced concrete work in RCC Wall G.F

Providing TMT Bar FE 500D reinforcement for R.C.C. work

including bending, binding and placing in position complete upto 909.00 ₹ 77.29 Kg. ₹

floor two level G.F.

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(A) Modular

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) 3.90 ₹ 4,874.33 Cumt. ₹

Conventional + Extra for brick work in superstructure above plinth

level upto floor two level (a) Modular

Providing 15 mm thick cement plaster in single coat on fair side

brick/concrete wall for interior plastering up to floor two level

finished even and smooth in with Floating coat of neat cement. (i)

cement Mortar 1:3 (1 cement : 3 Sand)

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering upto floor two level and

finished even and smooth in (i) Cement mortar 1:3 (1-cement:3- 2.30 ₹ 148.66 Sqmt. ₹

sand) Extra over items 58 to 64 for finishing with a floating coat of

neat cement slurry.

20 MM thick sand faced cement plaster on walls upto height

10meters above ground level consisting of 12 MM thick backing

coat of Cement Mortar 1:3 (1-Cement : 3-Sand) and 8MM thick 19.30 ₹ 347.42 Sqmt. ₹

finishing coat of Cement Mortar 1:1 (1-Cement : 1-Sand) etc.

Item No. & Description Quantity Rate Per Amount

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 (1 cement 6 coarse sand) on

new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing & cleaning the

surface etc. complete for light shade

Providing and laying Dark Telephonic Grey & All Other Available

Option of Granite Slab 1 side Polished 18 mm thick in Door,

Window risers of steps,skirtingDedo and pillars laid on 10mm thick

cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray

cement slury mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete.

Providing throating of plaster drip and moulding to R.C.C. Chhajja.

Providing wood work in frames of Doors, windows cleare story

windows and othersimilar works wrought, framede and fixed in 0.10 ₹ 610.23 Cudm. ₹

position. (A) Indian Teak Wood

Provoding and fixing flush door shutters, solid core construction

with frame of first class hardwood with cross board and face veneer

or plywood face panels, including anodised alluminium butt hinges

with necessary screws. (B) Non-decorative type and block board

core anodised alluminium butt hinges in flush door shutters (2)

Providing and fixing window having extruded aluminum Colour

anodized section frame main outer size 95mm x 24mm x 1.17mm

(of Jindal Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three

track member size 92mm x 31.75mm x 1.30mm (of Jindal Section

no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x

31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt)

with sliding shutters of horizontal member size 40 mmx18mm 0.80 ₹ 1,583.95 Sqmt. ₹

x1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical

member of size 40mm x 18mm x 1.29 mm (of Jindal Section

no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per

Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

mm diameter with jali of the following nominal diameter of self

cleansing design with C.I scread down or hinged grating including

the cost of cutting and making good the walls.

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm

size (inside) with standard weight.(i) Square mouth traps. (A)

100mm x 100mm size P type.

Item No. & Description Quantity Rate Per Amount

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with briocks having croshing strength

not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total weight of cover

with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt.

of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- 1.00 ₹ 2,932.93 No. ₹

coarse sand :4-graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on walls and bed

concrete etc. complete.(i) Inside dimensions 455mmx 610mm and

450mm deep for single pipe line.

Providing and fixing screw down bib taps of following size. (A)

Brass screw down bib tap polished bright. (i) 15mm dia.

Providing erecting and fixing double coated (ISI) water tank of

required capacity each with all necessary fittings and connection etc. 2000.00 ₹ 3.95 Liter ₹

complete on terrace.

Providing, laying and jointing in true line and level 110 diametre

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage system pipe line,

pipe shall be jointed with each other with rubber lubricant, pipe shall

be fixed on wall using of PVC clamp of the size 110 mm diametre x

149 mm length x 145 mm heigh at every 2000 mm center to center

or shall be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of all materials.

110mm Dia. Pipe 15.00 ₹ 878.57 Rmt. ₹

Providing laying and jointing in true line and level 15mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be concelled

as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost

of all materials.

Providing laying and jointing in true line and level 25mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be concelled

as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost

of all materials.

Item No. & Description Quantity Rate Per Amount

Providing, laying and jointing in true line and level 160 diametre

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage system pipe line,

pipe shall be jointed with each other with rubber lubricant, pipe shall

be fixed on wall using of PVC clamp of the size 160 mm diametre x 10.00 ₹ 834.38 Rmt. ₹

210 mm length x 196 mm heigh at every 2000 mm center to center

or shall be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of all materials.

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an even

shade including throughly brushing the surface free from mortar 40.90 ₹ 83.36 Sqmt. ₹

droppings and other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete

Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5 sq. mm

& earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 kv

grade FRLS PVC insulated multi strand copper wires upto max

length of 10 mt, in below type of pipe erected with 6A Tissino Type

ISI marked flush type switch / bell push and accessories erected on

Metal / PVC/Wooden Box covered with 3 mm thick 6.00 ₹ 472.68 Point ₹

PC(Polycarbonate) /Acrylic/Laminated sheet. with necessary Lamp

holder/ceiling rose / H.D.Connector as directed. (b) with 16 Swg (

1.6 mm) HGS metal Conduit Pipe and assessories painted black

erecting flushed on wall/ceiling complete.

Point wiring for Independent 6/16 plug and 16A with 2- 4 sq. mm

& earth wire of 2.5 sq. mm (green) both are of ISI marked 1.1 kv

grade FRLS PVC insulated multi strand copper wires upto max

length of 10 mt, in below type of pipe erected with 6A Tissino Type

ISI marked flush type switch / bell push and accessories erected on

Metal / PVC/Wooden Box covered with 3 mm thick 2.00 ₹ 712.05 Point ₹

PC(Polycarbonate) /Acrylic/Laminated sheet. with necessary Lamp

holder/ceiling rose / H.D.Connector as directed. (b) with 16 Swg (

1.6 mm) HGS metal Conduit Pipe and assessories painted black

erecting flushed on wall/ceiling complete.

Item No. & Description Quantity Rate Per Amount

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to

IS: 513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium

casted body with company mark/name 160V to 270V,Power Factor

more than 0.95, THD < 15 %,CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt ,LED driver efficiency > 85 %( fitting

required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the

(A) Square/ Circular shaped Surface/RecessedMount Downlight

with provision for spring loaded mounting clips complete.IP20, (iv) 5.00 ₹ 758.51 Each ₹

22-24 watts, Surge-2 KV, Catt-III

Total Amounts Rs. ₹

Total Amounts Rs. ₹

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Bardoli Nagarpalika

Chief Officer President

Bardoli Nagarpalika Bardoli Nagarpalika

Bardoli Bardoli