ISER-K/IWD/Elect/CL/21-22/25

Amount

Painting of Steel Tubular Pole of following lengths with one coat of red oxide paint/primer of(approved make, and brand) incl. preparation of surface by sand paper/emery paper, cleaning etc. and after that painting followed by two coat fine finished aluminium paintings (of approved make and brand as per IS 2339). i/c supply of all materials, labour and tools & plants, matching with existing color pole etc. as directed by the engineer-in charge complete in all respect. Bidders should note that the quoted rates must be inclusive of cutting, cleaning and removal of unwanted grass, bushes, creepers, small plants/trees etc. in the area(maximum upto 4 Sqmtr) around the poles as per requirement and as per direction of the Engineer I/c. Any kind of tools, tackles , material ,labour, cartage etc. involvement required is under the scope of the bidder and no additional payment will be made for that. Make: Asian Paints/Berger paints/Kansai Nerolac/Shalimar Paints/Jenson & Nicholson

For 12.0 Mtr. High Mast Poles

For 9.0 mtr. long poles

For 6.0 mtr. long poles

For 4.0-5.0 mtr. long poles

For 0.6 Mtr. bollard light poles

Painting of feeder pillar following size after scrubbing the rust from feeder pillar with one coat of red oxide primer (of approved make, and brand) incl. preparation of surface by sand paper/emery paper, cleaning etc. and after that painting with two coats synthetic enamel paint (of approved make, and brand ) inner & outer side part of panel supply of all materials, labour and T&P, matching with existing color feeder pillar etc. as directed by the engineer-in charge complete in all respect. Bidders should note that the quoted rates must be inclusive of cutting, cleaning and removal of unwanted grass, bushes, creepers, small plants/trees etc. in the area(maximum upto 4 Sqmtr) around the feeder pillars as per requirement and as per direction of the Engineer I/c. Any kind of tools, tackles , material ,labour, cartage etc. involvement required is under the scope of the bidder and no additional payment will be made for that. Make: Asian Paints/Berger paints/Kansai Nerolac/Shalimar Paints/Jenson & Nicholson

(180x150x55) cm size Approx.

(200x150x50) cm size Approx.

(120x120x50) cm size Approx.

Numbering to the street light poles and writing Feeder Pillars names in block letters or digits within a circle/square as required, with synthetic/cellulose enamel paint in black back ground and stenciling white/yellow number or letter etc.(approved make & brand, the size of letters and digits as given below.Size 40 mm and upto 50 mm as per direction of Engineer -In-charge. Bidders should note that numbering one pole OR naming one feeder pillar complete in all respect will be considered as each unit. Make: Asian Paints/Berger paints/Kansai Nerolac/Shalimar Paints/Jenson & Nicholson

Repairing of 6.0/5.0 mtr long broken/rusted/bend street light pole encircling with min 0.60 mtr. long two steel half pipes of suitable diameter and thickness weladed together to form a jacket with encases the base of the pole also welded to base plate to strengthen the pole and welding 4 nos. Gusset/Rib Plate of 15 mm thickness from 70 mm height of base plate & reinstallation etc. as required.

S&F LED Street light fittings of 70-72 Watts LED made up of aluminium die cast housing with toughed glass and individual LEDs with secondary optics and IP 66 protection IP 66, CCT- min 5700K,CRI >70,PF>0.95,Surge Protection 4 KV, Luminaire efficiency:≥110 lm/W including connection with pole junction box , testing complete all as specified and as directed by Engineer-in-Charge. Note : (i)Connection cable from pole Juction box to street light and street light bracket shall be measured and paid seperately under respective items. (ii)Quoted rate should be inclusive of taking down existing fitting SV/MH Street light, security light fittings (any type and any size), LED light any type, through ladder mounted on any type of poles/bldgs (up to 13 mtr height) from bracket after disconnecting supply cable for replacement of fittings all as specified and directed by Engineer in charge. NOTE: Rate should inclusive onsite warranty for a period of 2 years from date of supply of LED Luminaries. Make:- Bajaj, Crompton, Havells, Philips as approved by Engineer-in-charge)

S&F LED Flood light fittings of 300 Watts LED made up of pressure die cast Aluminium housing with toughed glass and individual LEDs with secondary optics and IP 66 protection, CCT- min 5700K,CRI >70,PF>0.95,Surge Protection 10 KV, Luminaire efficiency:≥110 lm/W including connection with pole junction box , testing complete all as specified and as directed by Engineer-in-Charge. Note : (i)Connection cable from pole Juction box to street light and street light bracket shall be measured and paid seperately under respective items. (ii)Quoted rate should be inclusive of taking down existing fitting SV/MH Street light, security light fittings (any type and any size), LED light any type, through ladder mounted on any type of poles/bldgs (up to 13 mtr height) from bracket after disconnecting supply cable for replacement of fittings all as specified and directed by Engineer in charge. NOTE: Rate should inclusive onsite warranty for a period of 2 years from date of supply of LED Luminaries. Make:- Bajaj, Crompton, Havells, Philips as approved by Engineer-in-charge)

Only taking down unserviceable street light fitting any type/flood light fittings any type and refixing on the existing location after repairing and testing with repair/ replacement of 2.5 Sqmm multi stranded copper cable as per site requirement, Ballast, ignitor , LED Driver, Lamps, copper wire, holders, HP/MH lamps, capacitor including cleaning of fitting and refixing it in its existing or new location complete all as specified and as directed by Engineer-in-Charge. (Note : Supply of only Ignitor, Lamp, Ballast, lamp holders, LED driver, capacitor, and supply cable etc will be measured and paid separately under respective seperate item.)

Supply only LED driver suitable for 72 -75 watt LED light ,240 Volt , 50Hz , AC . Make of Driver : Bajaj / Crompton/ Havells/Philips or equivalent as approved by Engr I/c. Note :(i) Contractor shall bring the new driver as per existing model and make for replacement of u/s or suitable driver of same capacity to make the light functional. (ii) Before procurement and fixing of driver in existing fitting contractor shall check the suitibility of model of new driver to match with existing u/s driver.

Supply only LED driver suitable for 43-45 watt LED light ,240 Volt , 50Hz , AC. Make of Driver : Bajaj, Crompton, Havells, Philiops or equivelent as approved by Engr I/c. Note :(i) Contractor shall bring the new driver as per existing model and make for replacement of u/s or suitable driver of same capacity to make the light functional. (ii) Before procurement and fixing of driver in existing fitting contractor shall check the suitibility of model of new driver to match with existing u/s driver.

Supply only HPSV/MH open construction electromagnetic copper ballast of capacity 400 watt consisting of high quality silicon steel lamination with argon welding,, super enamelled copper wire, vacuum impriganated with white resin, terminal block with tapping for 220/240 volt supplied,50Hz . Make : Philips or equivelent as approved by Engr I/c

Supply only as per Item No 10 here-in-before but capacity 250 Watt. Make : Philips or equivelent in Bajaj/CG as approved by Engr I/c

Supply only as per Item No 10 here-in-before but capacity 150 Watt. Make : Philips or equivelent in Bajaj/CG as approved by Engr I/c

Supply only MH lamp E40 tubular suitable for integral / non integral street/flood light fittings of capacity 400 Watt. Make: Philips or equivelent in Bajaj/CG as approved by Engr I/c

Supply only as per Item No 13 here-in-before but MH lamp of 250 Watt. Make: Philips or equivelent in Bajaj/CG as approved by Engr I/c

Supply only MH-T E40 lamp of 150 Watt. Make: Philips or equivelent in Bajaj/CG as approved by Engr I/c

Supply only electronic ignitors suitable for HPI(-T) 250-400 Watt SV/MH street light fitting 240V, 50HZ complete all as specified and directed .Make Philips or equivelent in Bajaj/CG as approved by Engr I/c

Supply only electronic ignitors suitable for SON(-T) 100-150-250-400 Watt OR MH 35-70-150 street light fitting 240V, 50HZ complete all as specified and directed . Make Philips or equivelent in Bajaj/CG as approved by Engr I/c

Supply only porcelain holder (threaded type ) with Base E-40 suitable for 250/400 Watt SV/MH SE lamp fitting complete all as specified and directed .

Supply only capacitor 33 MFD suitable for 250/400 watt SV/MH light fitting 250V , 50Hz , complete all as specified and directed. Make: same as EPCOS as approved

S & F cable junction box of size (approx 160x125x80) mm ,IP 66 , halogen free and weather proof for outdoor installation of street light , complete with terminals suitable for cable size 16 sqmm x 4 core after dismentaling existing u/s street light terminals any type and size , disconnection of existing cable connection/reconnection of cable etc complete with welding the in-built pole box with blank plate all as specified and directed by Engineer-in-charge. Note : Contractor shall provide cable lugs and gland of suitable size if required on site for connecting cable in junction box.

Supply & fixing for Astronomical time switches (2 Module with 150 Hr battery back up) , programming based on latitude/longitude with time zone option , Auto on/off , sun rise/set & twilight rise/set ,12/24 hours display format , 240 Volt AC 50 Hz , all as specified and commissioning as directed by Engineer-in-Charge including taking out old timer . (Make: L&T Cat No:-AUTS02AST00/ or equivelent as approved by Engr I/c )

Taking out old u/s contractor and S&F AC Duty-3 power contactor 70 Amps, with Add-on Auxiliary Contact Blocks as pre requirement during commissioning 415 volts AC, 50 HZ, 4 pole, complete all as specified and as directed by Engineer-in-Charge. (Make:L&T Type MO cat No-CS94574/ or equivelent make in Siemens/ABB/C&S/BCH/GE as approved by Engr. I/c

Taking out old u/s contractor and S&F AC operated power contactor 40 Amps, 415 volts AC, 50 HZ, 3 pole, complete with Add-on Auxiliary Contact Blocks as pre requirement during commissioning all as specified and as directed by Engineer-in-Charge . (Make:L&T Type MO cat No-CS94574/ or equivelent make in Siemens/ABB/C&S/BCH/GE as approved by Engr. I/c)

Supply & fixing for PVC insulated and FR PVC Round Sheathed, Copper Conductor 3 Core x 2.5 Sqmm cable for connection of security light from junction box to security/street light to be drawn through PVC conduit/pipe along the pole or through inside the street light pole or over head line to street light fittings etc including taking out old u/s wires complete all as specified and as directed by Engineer-in-Charge. Note : PVC Conduit shall be measuerd and paid seperately under respective item. Make: Havells, Polycab, Finolex, KEI

S & F of PVC medium grade flexible conduit 20 mm dia for drawing conductor cable/wiring between pole junction box and light fitting including fixing clamp in each pole to be provided. Make: Havells, Polycab, Finolex, KEI

Supply, Laying, commissioning and testing of UG LT cable XLPE insulated screened PVC bedded, galvanized steel strip armored, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm 4 core including connecting the cables at both ends by providing suitable size aluminium lugs at the termination ends. Note: Quoted rate should be inclusive of excavation in trenches in any type of soil not exceeding 1.5 mtr wide and n.exe 1.5 mtr depth including getting out all as specified and directed.Also returning sand filling in-trenches with clean dry sand unwashed including gently pruning around cables, brick laid flat in trenches over sand cushioning for cable protection complete all as specified and directed, including spreading, leveling ,and well ramming, in each layer of any kind of soil. Make: Polycab, Finolex, KEI, Havells

Supply, Laying, commissioning and testing of UG LT cable XLPE insulated screened PVC bedded, galvanized steel strip armored, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm x 4 core including connecting the cables at both ends by providing suitable size aluminium lugs at the termination ends. Note: Quoted rate should be inclusive of excavation in trenches in any type of soil not exceeding 1.5 mtr wide and n.exe 1.5 mtr depth including getting out all as specified and directed.Also returning sand filling in-trenches with clean dry sand unwashed including gently pruning around cables, brick laid flat in trenches over sand cushioning for cable protection complete all as specified and directed, including spreading, leveling ,and well ramming, in each layer of any kind of soil. Make: Polycab, Finolex, KEI, Havells

Supply, Laying, commissioning and testing of UG LT cable XLPE insulated screened PVC bedded, galvanized steel strip armored, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 x 3 core including connecting the cables at both ends by providing suitable size aluminium lugs at the termination ends. Note: Quoted rate should be inclusive of excavation in trenches in any type of soil not exceeding 1.5 mtr wide and n.exe 1.5 mtr depth including getting out all as specified and directed.Also returning sand filling in-trenches with clean dry sand unwashed including gently pruning around cables, brick laid flat in trenches over sand cushioning for cable protection complete all as specified and directed, including spreading, leveling ,and well ramming, in each layer of any kind of soil. Make: Havells, Polycab, Finolex, KEI

Manual moling of road for laying 50 mm dia GI pipe medium grade complete all as specified and as directed by Engineer-in-Charge inclusive supply of material, labour , tools for laying 50 mm bore GI pipe of ap[proved make, light grade with all fittings, labour tool plant in crossing road/path upto in pole up to junction box properly compacted / filled with soil by watering and by approved procedures, the pits shall be backfilled, compacted & restored etc. complete all as specified and as directed by Engineer-in-Charge.

Manual moling of road for laying 80 mm dia GI pipe medium grade complete all as specified and as directed by Engineer-in-Charge inclusive supply of material, labour , tools for laying 80 mm bore GI pipe of ap[proved make, light grade with all fittings, labour tool plant in crossing road/path upto in pole up to junction box properly compacted / filled with soil by watering and by approved procedures, the pits shall be backfilled, compacted & restored etc. complete all as specified and as directed by Engineer-in-Charge. Make: TATA/ ZINDAL/Any ISI Mark conform to IS specification.

Relocation of 6.0/ 9.0 Mtr. street light poles after taking out from existing location complete all as specified and shifting to new location within 200 Meter includuing arrangement of transport , labour, and re-installation as directed by Enginner-In-Charge.(Note: Excavation and Pole Foundation is not in scope of this item.

Taking down exiating avaition light from Over head water tank/ Mumpty any location upto 35 mtrs height and supply and fixing integral avaition light comprising of aluminium housing with polycarbonate enclouser,IP-65,240V AC,50Hz including all electrical connection as required at site complete all as specified and directed by Engr-In-Charge .Make Bajaj Cat No:-BGAV 302 LED or equivelent in Havells / Philips/CG as approved by Engr I/c Note - Through there is stairs/rungs to reach the terrace of bldg /Roof of Hangar but any additional T&P required on site for fixing avaition light to be arrange by contractor. Make:- Bajaj, Crompton, Havells, Philips as approved by Engineer-in-charge)

Supply,installation,testing and commissioning 3 phase and neutral , 415 volts out door type , factory made free standing , floor mounting ,dust and vermin proof, cubical type LT panel fabricated from 3.15 mm thick CRCA sheet with angle iron frame of 40 x 40 x 5 mm , double door , front hinged opening , rubber lining,locking arrangement,with anticorrosive coating and finally epoxy polyester power coating of flint grey shade (RAL-7032) , protection class IP-65 fully compartmentalize design with 4 nos of bus bar made of copper of ETP grade suitable for 250 Amps pre-wired with suitable size of copper strip , short current current rating 50 KA(rms) for one second including suitable aluminium earth strips conforming to IS with danger notice plate , necessary cable glands , cable connection with proper lugs ,PCC foundation and pedestal for fixing piller feeder box with PCC 1:2:4 15 CM thick in foundation , brick (sub class B) / stone / PCC block work in CM 1:6 , rendering 1:6 on exposed surfacea and 100 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in padding on top and grouting bolts etc for panel. The plateform shall be of 450 mm height above ground level and of adequate size leaving min 300 mm all around the feeder pillar board for movements all as specified with supply and fixing the following. (A) Incoming: (i) MCCB 415 volts , 125 Amps rating 4 pole , C curve , thermal setting adjustable type 70-100% specially fixed for incoming supply with overload , short circuit and earth fault protection (Ics-100 % Icu) , service breaking capacity 25 KA --- 01 Nos, (ii) Ammeter---01 Nos , Voltmeter -----01 Nos (iii) Three indication lamp Neon type for three phase. (B) Outgoing : (i) MCCB 415 volts , 63 Amps rating 4 pole , C curve , thermal setting adjustable type 70-100% specially fixed for incoming supply with overload , short circuit and earth fault protection (Ics-100 % Icu) , service breaking capacity 25 KA --- 01 Nos (ii) MCB 40 Amp Four Pole (FP) , ultimate breaking capacity 15KA , C curve -----01 No (iii) MCB 25 Amp Double Pole (DP) , ultimate breaking capacity 10KA , C curve -----01 No Note:- (i) All MCCB/MCB should be of make L&T/ABB/Schnider/Siemens.(ii) Drawing of LT panel and make of items to be got approved from Engineer-In-Charge before ordering the panel.(iii) Cost of lugs for cable and cable gland etc also included in unit rate of panel.(iv) Cost included taking out existing cable from old panel and refixing and connecting to new panel.

Taking down existing post top lantern from any post and supply and fixing 40-45 W LED post top lantern light made in aluminium with decorative opal polycarbonate diffuser with IP-65 protection, CCT- min 5700K, CRI>70, PF>0.95,Surge Protection>4 KV, Luminaire efficacy: > 100 Lm/W with all electrical connection fixing arrangement as required at site complete all as specified and directed by Engr-In-Charge . Rate should inclusive onsite warranty for a period of 2 years from date of supply of LED Luminaries. Make: BAJAJ/Havells / Philips/Crompton as approved by Engr. In charge

Taking down existing bollard and supply and fixing 9-10 W LED Bollard light with IP-65 protection, CCT- min 5700K, CRI>70, PF>0.95,Surge Protection>4 KV, Luminaire efficacy: > 100 Lm/W with all electrical connection fixing arrangement as required at site complete all as specified and directed by Engr-In-Charge . Rate should inclusive onsite warranty for a period of 2 years from date of supply of LED Luminaries. Make BAJAJ/ Havells / Crompton/Philips or equivalent as approved by Engr. In charge

Laying of one run of 3.5Cx 50 Sqmm size XLPE insulated and PVC sheathed aluminium cable of 1.1 KV grade direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Supply of 1.1 KV grade XLPE insulated insulated and PVC sheathed flat strip Armoured Aluminium power cable of 3.5Cx50 Sqmm size as per IS- 7098 (Part-1) Make: Finolex, Polycab, Havells, KEI

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc.with charcoal/ coke and salt as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Supply and erection of Single arm 6 m octagonal galvanised ( in single dip to average 80 micron)tapered pole(above ground level) having Bottom diameter 155-160 MM & top Diameter 70-75 MM fabricated out of 3 mm thick sheet complete with in built junction box, base plate size 300 x 300 x20 mm ,with arm of ERW galvanised pipe of 60mm dia and 1m in length from side of pole shaft per detailed specifications.Juncion box shouldbe provided 500 mm above base plate with 4 Nos terminals on epoxy insulators, 1 No.3A SP MCB &1 no.neutral link.Base plate should have 4 Nos holes on each side suitable for mounting on RCC foundation 250 mm above FGL. Galvanised base plate to be welded at the bottom with Gusset/Rib Plate of 15 mm thickness from 70 mm height of base plate. Poles should be aluminium embellishment duly painted with polyutherine paint, service window including junction boxas per detailed specifications. and as per instruction of E.I.C asrequired to complete the work in all respect. These poles will be erected in the existing foundation. So bidders are requested to inspect the site before consignment arrived at site. Make-Utkarsh/Bajaj/Skipper/ELECTRO POLES PRODUCTS PVT. LTD.

FOUNDATION OF POLE Foundation with RCC(Gr.M20,PCC(1:3:6),12mm dia rod of size 600 mmx600 mm x 1200 mm depth in ground with help of 4 Nos Foundation Bolt 24 mm Dia 750 Long hot dipped "L" Shaped duly finished with cement plaster, type bolt as per approved drawing. Ordinary Portland Cement Grade 43: Ultratek, Birla, ACC, Ambuja TMT/Steel Sections: SAIL, Tata, Jindal, Electrosteel, Shyamsteel

Supply and erection of 9.0 Mtr. hot dipped galvanised ( in single dip to average 80 micron)steel swaged tubular pole conforming to dimensions as per [540 SP-33,IS: 2713-1980 (part III)] with galvanised base plate of size 400mm x 400mm x 20 mm in foundatuion (as per attached drawing) duly finished with at least 4 nos. Gussets/Rib Plate of 15 mm thickness and from 70 mm height for strengthening the poles which are not welded with base plate. Outside diameter and thickness of the Bottom, Middle and Top sections are [165.1x5.4, 139.7x4.5,114.3x3.65]mm respectively. Also the pole earthing terminals , cable entry, GI cable sleeve complete as required. The pole shall be galvanised using ISI mark tube to meet the grade YSt 310 of IS : 1161 with 540 Mpa Tensile strength. Make: Bajaj, Utkarsh, Skipper,ELECTRO POLES PRODUCTS PVT. LTD.

Fabrication, supply & fixing of hot dipped galvanised steel bracket structure suitable for fitting of four or higher numbers of Outdoor type LED Light Fixtures and also having fabricated 'U' Clamping arm bracket arrengement as required for exisiting Street Light fittings in same/opposite direction. The extendent portion of this pole have proper locking arrangements & necessary hardware complete as per design approved by Engineer-in-charge. Make: Steel Sections: SAIL, Tata, Jindal, Electrosteel, Shyamsteel

Supply of 4 pole Terminal strip to be installed inside street light pole made of Glass reinforced polyester dough moulding compounds (DMC/SMC) insulator material, screw connector suitable for termination of cable as approved by Engr I/c

Material & Labour for welding of door of feeder pillar with proper size new hinges of suitable size and locking arrangements as required complete all as specified and directed by engineer I/c

SHAURYA ENTERPRISE

M/S A. K. ENTERPRISE

Bajaj Electricals Ltd