Providing, installation, testing and commissioning of furniture and fume hoods for Materials Center Lab at CIF in IISER

Amount

Providing and fixing side tables of length, width & height as specified on frames of high quality, mild and degreased steel conforming to relevant IS Codes. The H- steel section shall be of epoxy powder coated (minimum 60 microns) (conforming to IS-13871) for chemical resistance, scratch resistance and to prevent rusting and having a size of 60×40x2.9mm (maximum vertical legs spacing 1800 mm) and shall be joined by bead welds (conforming to IS: 822-1970) grinded smooth. Provisions shall be provided for inserting under table storage cabinets and drawers. The work top shall be 16mm thick TRESPA with “Electron Beam Cured “surface (EBC) which is free of melamine resins, with seamed/bevelled edge finished smooth and shall be suitable for the application of chemical resistance, thermal stability, impact resistance, durability and sterilization. Same material back splash of 100mm shall be provided on all along the wall side using suitable adhesive. Suitable provisions for sink, services, pipe lines, etc. shall be provided wherever necessary. The whole cabinet arrangement shall satisfy SEFA standards, specifications, technical specifications, drawings and as directed by IISER TVM.

Length 15220mm width 600mm & height 900mm height

Length 3580mm width 600mm & height 900mm height

Length 4020mm width 600mm & height 900mm height

Length 3560mm width 600mm & height 900mm height

Island tables of length, width & height as specified with H-frame design of high quality, mild and degreased steel conforming to relevant IS Codes. The H-frame steel section shall be of epoxy powder coated (minimum 60 microns) (conforming to IS-13871) for chemical resistance, scratch resistance and to prevent rusting and having a minimum size of 60×40x2.9mm and shall be joined by bead welds (conforming to IS: 822-1970) grinded smooth. Provisions shall be provided for inserting under table storage cabinets and drawers. The work top shall be 16mm thick TRESPA with “Electron Beam Cured “surface (EBC) which is free of melamine resins, with seamed/bevelled edge finished smooth and shall be suitable for the application of chemical resistance, thermal stability, impact resistance, durability and sterilization. Suitable provisions for sink, cup sink, services, pipe lines, etc. shall be provided wherever necessary. The whole cabinet arrangement shall satisfy SEFA standards, specifications, technical specifications, drawings and as directed by IISER TVM..

Two height adjustable reagent racks 400mm wide made out of frame work of epoxy powder coated steel sections of RHS 100x50x2mm as support of height 750mm and structurally stable at architecturally appealing intervals with 10mm thick toughned glass rack, MS powder coated glass holders with necessary accessories, 10mm dia powder coated SS rods along both edges of glass with necessary connecting accessories, etc complete. Suitable duct/trunking made of 19mm thick boiling water proof plywood shall be provided for electrical cable management along with the frame. The whole cabinet arrangement shall satisfy SEFA standards and all as per drawing and as directed by IISER TVM. Length 2500mm width 1500mm & height 900mm height

Providing and fixing on island and side table, under table cabinet and drawer combination of specified size L.H. & R.H. side panel, bottom panel, top panel, back panel, front panel & drawer separator made out of 19mm (minimum) thick boiling water proof plywood both side laminated with 0.8 mm thick melamine (conforming to IS: 5509-1980) and exposed edges shall be finished with PVC lipping of minimum 3mm thickness fixed using suitable adhesive. The hinges for the shutter shall be SS304 grade auto close hinges of 180 degree openable. Shutter/drawer shall be provided with epoxy powder coated steel channel so as to act as handles flushed with the face. Suitable locking arrangement shall be provided. The ball slide for drawer shall be double extension ball bearing of chromate steel with a load capacity of 45 kg UDL per pair. Suitable locking arrangement of SS304 grade shall be provided. The intermediate horizontal racks provided in the cabinets as per the drawing shall be provided with height adjustable mechanism. The cabinets shall be fixed 100mm above floor level providing a foot space. The whole cabinet arrangement shall satisfy SEFA standards, technical specifications, drawings and as directed by IISER TVM.

900mm x 700mm x 450mm (Single drawer and cabinet with double shutter)

600mm x 700mm x 450mm(Single drawer and cabinet with single shutter)

Providing and fixing on to the island/side table, under table cabinet alone of specified size consisting of L.H. & R.H. side panel, bottom panel, top panel, back panel, front panel & shelves separator made out of 19mm (minimum) thick boiling water proof plywood both sides laminated with 0.8 mm thick melamine (conforming to IS: 5509-1980) and exposed edges shall be finished with PVC lipping of minimum 3mm thickness fixed using suitable adhesive. The hinges for the shutter shall be SS304 grade auto close hinges of 180 degree openable. Shutter shall be provided with epoxy powder coated steel recessed sections so as to act as handles flushed with face. Suitable locking arrangement by ball catcher/V catcher shall be provided. The cabinets shall be fixed 100mm above floor level providing a foot space. The whole cabinet arrangement shall satisfy SEFA standards and all as per drawing, technical specifications and as directed by IISER TVM.

1500mm x 700mm x 600mm cabinet with double shutter under sink area

Providing and fixing counter top sink of polypropylene of approved make with /without drain boards of same material on to the space provided in side/island tables, making suitable inlet conncetion isolated by angle valve and providing outlet connections to the already provided drains by means of bottel trap and flexible tube of PP and 40mm NB SW PVC-U pipes schedule 40 conforming to ASTM-D-1785 with solvent cemented fittings as per ASTM standard, totally leak free complete as shown in the drawings and as directed by the IISER TVM. (Pipes shall be measured in the respective item)

Sink of size 600x450x315mm without drain board

Providing and fixing angled table mount double head Eye washer having proper grip for holding, near sink with suitable mount and making suitable connections to the already provided water mains as shown in drawing, technical specifications and as directed by IISER TVM.

Providing and fixing Pillar type 3way water tap with swivelling GOOSENECK Spout made up of PP Handle & Brass with surface protected by Epoxy Powder Coating of approved colour and shall have a water flow capacity of around 30 lit/min at 3kg/sqcm pressure & working temperature range of 0-70°C with test pressure 9kg/sqcm & max working pressure of 10kg/sqcm. Suitable arrangements shall be provided to connect the tap to the existing water mains by means of CPVC pipes all as in drawing, technical specifications and as directed by IISER TVM

Providing and fixing mountable type drying laboratory rack of suitable size made of high density polypropylene having at least 54 pegs, each having a length of 125mm and diameter 10mm with load bearing capacity of minimum 4kg. Each peg board shall have a drip rack at the bottom with suitable arrangements for draining out.

Supplying and fixing suitable size modular plate and cover in front on surface or in recess, in island tables including wiring from power outlet to sockets with 3Cx4 sqmm PVC Sheathed unarmoured FRLS Industrial Flexible copper Cable in suitable size of UPVC Cable management /trunking system wherever necessary along with providing and fixing 6 pin 6/16 amps modular socket outlet with 16 amps modular switch, connections terminations, necessary clamping etc as required and as directed by IISER TVM.

CONSTANT AIR VOLUME FUME HOODS Supply, Installation, testing and commissioning of following types of Fume Hoods of following sizes with super structure out of 45x45x2mm angles and outer lining of GI sheets. Inner lining baffles and worktop shall be of same material as per specification. Design shall be of aerodynamic with air foil of SS 316 type. Bypass grill shall be of same material as the outer construction. Combination Sash shall be of toughened glass with SS 316/epoxy powder coated aluminium extruded handles, running on counterbalance mechanism on either pulley and SS ropes or sprocket and chain. Suitable plumbing services and valves shall be provided and a drip cup shall also be provided. Fume hood controller, operation panels, alarm hooter, sensors, light fittings, sockets, MCBs complete all as per the technical specifications. Normal Constant Air Volume Fume Hoods with under hood cabinets with provision for duct entry and cabinet for vacuum pump as per specification: Dimensions: Width: 1800mm x Depth: 1000 mm (minimum work area depth 800mm) Height: 2520 mm, work top height of 900mm

With Flammable Under Hood Cabinets

Supply, Erecting of Rigid Ducting of PP (Polypropylene) + 3mm thick FRP (Fibre Reinforced Polyester) and flexible ducting with flanges, bends, damper transitions, clamps etc. Flexible joint is provided in the ducting in order to avoid transmitting the blower vibrations to the hood as per the specifications. A weather proof rain cowl is provided at the outlet of blower. The work shall also include all necessary scaffolding, working platform, support to ducting, safety features, etc

300mm Dia

Supply, installation, testing and commissioning of 'Centrifugal Corrosion Resistant’ direct coupled type blowers with TEFC motors including VFD ,gravity louvers of following capacity complete as per specification.

1500CFM/requiredHP/ St. Pressure 120mm wg

Supply , erection of volume control damper with all accessories complete as per the specification.

PP 300 dia. single leaf manual damper with both side flanges for Fume hood subheader.

Chemical Storage Cabinet, Size : L 900 X D 450 x H 1800mm - Cabinet walls : 15.0 mm thk PP construction - Cabinet Structure in annodised aluminum construction - 4 Doors in 15.0 mm thk PP construction - PP handle in all 4 doors - 4 Nos. Shelves in PP construction - 4 Nos. trays in 3.0 mm PP construction, kept on 4 nos. PP shelves. - PP Damper - 100mm Dia - Provision for ventilation shall be provided