REPAIR TO LEAKAGE SEEPAGE AND OTHER ALLIED WORK OF SCHOOL BLDG AND CONSTRUCTION OF PM SHRI SINGLE LAB OF SIZE 7 X10 60 MTRS AT KENDRIYA VIDYALAYA DHARAMSHALA

Amount

Demolition of cement concrete of any description and in any position, provided for complete all as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) including removal of debris to out side Mil Stn, complete all as specified and directed.

Dismantling floor , hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises.

Dismantling stone slabs and tiles of any description or thickness and in any situation laid bedded and pointed in any motor complete all as specified.

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed.

Dismantling wrought iron or mild steel work of such as grill/roof purlin etc not otherwise provided for complete all as specified & directed.

Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified

Taking down chowkat with shutter exc 1.5 sq.m but n.exc 4 Sqm each and removing to store yard.

Taking down shutter of any description, exc 1.0 sq.m but n.exc 2.00 sqm each and removing to store yard.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing.

S&F in repair 15 mm dia bib tap cast copper alloy (fency type), chromium plated ,'with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule all as directed.

S&F in repairs stop valve, cast copper alloy, with crutch or butterfly handle, screwed down both ends for high pressure, as per ISI suitable for 15mm dia iron pipe all as directed.

S&F in repair 15 mm dia brass chromium plated pillar tap, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe all as directed.

S&F in repairs 10 ltrs capacity (PVC), valve less, syphonic action type, fluhsing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.

S&F in repairs vitreous china water closet Padestal pattern( white ) excluding fixing bolts, flushing cistern and flush pipe complete all as directed.

S&F plastic sheet covers for water closet, black,closed pattern with flat bottom with mild steel chromium plated or alluminised hinging device.

S&F in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to 'flushing cistern/pipe complete all as specified and directed.

Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills,steps,and other similar bands,plinth courses, string courses, lacing courses, parapets and railing upto 60cm height,copings,kneelers,apex stone,bed plates and the like including weathering slightly rounded or chamfered angles and throating, all as specified and directed.

M&L 25mm th PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in flooring, finished fair and even.

M & L for PCC 1:2:4 type B0 using 12.5mm graded aggregate as in benching concrete.

M&L for providing edge moulding to 16-18mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and as directed.

M&L brick work with sub class' B' bricks of old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4.

M&L for cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight). Complete all as specified.

M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished fair and even smooth without using extra cement complete all as specified.

M & L rendering 15mm thick on other than fair faces of brick wall or concrete surface in cement mortar 1:4 finished fair and even mixed with water proofing compound 500gm per bag of cement finished fair and even smooth without using extra cement complete all as specified.(Note: Water Proofing compound shall measured and paid separately)

M & L rendering 5mm thick on ceiling in cement mortar 1:3 finished fair and even smooth without using extra cement complete all as specified

M&L non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specfied and directed.

M&L glazed ceremic tiles in vertical surfaces 300x200x7 mm thick, set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10 mm thick rendering in CM (1:4) complete all as specfied and directed.

M & L preparation of new plastered surfaces and clearcolle for priming to distempering and applying two coats of distemper oil emulssion, white or tinted incl 1-2 mm wall care putty, complete all as specified.

M & L applying three coat of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified.

M&L for preparation of new surface of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm ,incl 1-2 mm exterior grade wall care putty complete all as specified.

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete or as directed by Engineer-In-Charge.

S&F factory made solid PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for bottom and top rails. MS frame shall be covered heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail& bottom rail on either side & as gap insert for top rail & bottom rail; partly glazed i.e. upper panel will be glass pane fitted externally in the clear space & lower panel will be plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at the site as per specification described in SSR 2004 Part II Item No 881.

S&F 100 mm size MS butt hinges medium weight cold rolled fixed to frame complete all as specified and directed.

S&F in repairs 450mm long PVC connection 15mm bore with PTMT nuts.

S&F rotational moulded polythene water storage tank (Cylindrical vertical withclosed top)hoisted and fixed in position of 500 ltrs capacity fixed with PVC tank nipples, complete all as specified in SSR Part I Incl.dismentling of existing tank and removing to store/Sch of credited.

S&F rotational moulded polythene water storage tank (Cylindrical vertical withclosed top)hoisted and fixed in position of 1000 ltrs capacity fixed with PVC tank nipples,complete all as specified in SSR Part I Incl.dismentling of existing tank and removing to store/credited.

S&F in repairs ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia all as directed.

S&F in repair vitreous china,white, wash hand basin, flat back size 550x400mm 'including MS brackets including cutting for and pinning in, but excluding waste pipe.

S&F in repair PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints fixed to walls incl dismantling complete all as specified & directed.

S&F in repair 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls incl dismantling complete all as specified & directed.

S&F 110mm PVC(SWR) bends any radius, with oval access door, complete all as specified and directed.

S&F 75mm PVC(SWR) bends any radius complete all as specified and directed.

S&F in 110mm PVC(SWR) branch piece, single (single Y) equal or unequal fixed with solvent cement, with oval access door, complete all as specified and directed.

S&F in repairs vitreous china urinals,flat back of size 465mmX355mmX265mm,white with grating and union for discharge pipe including connecting to waste pipe complete all as specified and directed.

S&F 32mm dia waste coupling of PTMT (half or full threaded) minimum weight 45 gms, suitable for urinals complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 mtr in depth for foundation laying of under ground cable erecting of pole stay not exc 10 sqm on plain and not exc 1.5 m depth and getting out in any type of soil complete all as specified and directed.

Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25cm (hard/dense soil)

M&L for Sand filling under floors or in foundations including watering and consolidation

M&L for hard core of broken stone or boulders guage n exec 63 mm deposited and levelled in layers n exec 15 cm thick watered and rammed to a true surface of broken bricks aggregate complete all as spd and directed

Filling under floor (except material) including spreading, levelling, watering and well ramming in layers n exc. 25cm complete all as specified.

Removing excavated material (Soil) n .exc 50 m and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.

M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

M&L RCC M-25 (Design Mix) as in foundation, including raft, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed.

M&L RCC M-25 (Design Mix) as in columns, pillars, piers etc complete all as specified and as directed.

M&L RCC M-25 (Design Mix) as in beams, cantilever, lintels etc complete all as specified and as directed.

M&L RCC M-25 (Design Mix) as in chajjas/shelfs complete all as specified and as directed.

M&L form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams or similar works vertical or to batter for fair finished flat surface of concrete

M&L form work to sides and soffits of roof beams, lintels lever shelves incl supports over hang etc rough finished surfaces of concrete flat all as specified.

M&L form work to chullah hoods, chajjas/shelfs and similar items incl edges rough finished surfaces of concrete flat all as specified.

M&L form work to sides of pillars, posts, struts, columns for rough finished surface of concrete square, rectangular or polygonal all as specified and directed.

M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide rough finished surfaces complete all as specified and directed.

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to all as specified.

Description same as Item No 64 above but, 5 mm dia and over and incl 10mm dia in stirrups, spacers and binders

M&L Brickwork with sub- class ‘B’ bricks straight or curved on plan exc 6 m mean radius, and setting in cement mortar 1:6 complete all as specified and directed .

M&L Brickwork with sub- class ‘B’ bricks straight or curved on plan exc 6 m mean radius, in half brick thick walls built in setting in cement mortar 1:4 complete all as specified and directed .

M & L 15 mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:4 mixed with water proofing compound as per manufacturer instruction, finished fair and even complete all as specified and directed. (WPC measured separately)

M & L 15 mm thick cement plaster on otherthan fair faces of brick work or concrete surface on wall in CM 1:6 finished fair and even complete all as specified and directed.

M&L 5mm thick rendering in CM 1:4 on ceiling, soffits, chajja projection complete all as specified and directed

GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and as directed

Supply only water proofing compound, complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 of type D-2 using 40mm graded stone agrregate as in sub base of floors etc complete all as specified and directed.

M&L PCC 25mm thick 1:2:4 of type B1 using 20mm graded stone aggregate as in floors finished rough and uneven complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate) as in plinth protection laid in alternate panels 75mm thick finished even and smooth w/o using extra cement.

M & L, cement concrete 1:2:4 type B-2, using 40 mm graded stone aggregate as in surface channel or drain complete all as specified and directed.

M & L, forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitered / stopped ends etc. complete all as specified and directed.

M&L, providing cement concrete1:2:4 type B1 as in , coping ,benching, bressumers, steps, incl necessary form work complete all as specified and as directed.

S&F 1.25 mm thick Pressed steel frame size 125 x 60 for doors with one or more rebates including necessary fixing lugs, lock strike plate, hold fast etc., including Frames shall be filled with PCC 1:3:6, type C-0 (12.5 mm graded stone aggregate) complete all as specified and directed.

S & F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 30 mm thick IInd class hard wood glazed skelton shutters divided into square open rebated and prepaired to recive glass,guage etc as in door, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of sutters as specified in SSR part - I section - 8, clause 8.20 (a). S&F to chowkhat.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone for embedding of hold fast etc complete all as specified and directed.

S&F 300 mm long aluminium alloy annodised slidding door bolt with hasp and satple (bolt type) and fixing clips of sheet castor extruded sections and fixing bolts and slidding bolts of extruded section or cast aluminium alloy and fixed all as spd and directed

S & F of 125 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

S&F aluminum alloy door closer hydraulically regulated, desination No 3 universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 Kg and fixed to door frame complete all as specified and directed.

S&F 150mm long floor door stopper of aluminum alloy body and tongue , anodized with hard drawn steel spring complete all as specified and directed

S&F 200mm aluminium anodised barrel tower bolts of extruded section all as specified

S& F 150 mm extruded aluminum alloy handles, fabricated type anodised.

M&L for applying two coat of plastic emulsion paint on newly plastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed..

M & L preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces all as specified.

M&L for applying two coat exterior emulsion paint (weather coat of Berger or equivelent ) on newly plastered wall/ceiling with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness (suitable for external surface)prepared and sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed..

M&L for double charged Vitrified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tilesexceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry over 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match.

M&L for double charged Vitrified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry in vertical surfaces over 10 mm thickplastering in CM 1:4 and pointed in white or coloured cement to match.

M & L, glazed joint free coloured ceramic tiles in vertical surface as in skirting & dado, 7 to 8 mm thick area exc 0.06 Sqm but n.exc 0.18 Sqm over and including 10 mm thick rendering in CM1:4 set & jointed in neat cement slurry & pointed in coloured cement to match complete all as specified and directed.

Granite (of any type of coloured) work (table rubbed and polished) 18-20mm thick in steps jambs,pillars, window cills, cooking plateform /partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in CM 1:6 incl moulding, chamfering of edges complete.

S&F sheet glass 5.5 mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified

S&F powder coated aluminum frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed.

S&F anodised aluminium window and ventilator shutters, powder coating of any colour (Thickness or powder coating not less than 50 micron) side hung type/Sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F SS wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with SS wire staples complete all as specified and directed.

M&L Clean sawn timber fixed and framed Second class hard-wood in scantlings for frame work complete all as spd and as directed.

M& L 18 to 19 mm thick block boards grade 2 quality interior grade, commercial type fixed with screw to timber frame work as in cup board shutter / shelves/cabinet fixed including both side decorative laminate of thickness 0.9mm type1 of surface finish, colour and pattern as approved, fixed with approved adhessive as per manufacturer's instructions and wooden leaping 5mm thick all round , including continuous (piano) hinges, mild steel,bright finish ,width of flaps (when open) 30mm with welding the same along with existing steel door frame with nails to timbar frame and complete all as specified and as directed

S& F 75 mm Extruded brass handles,fabricated type polished Handles shall be of pattern/design as approved by engg- in- charge complete all as specified and as directed

S & F 75 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws

S&F 1000 liters capacity rotational moulded polyethylene water storage tank (Cylindrical vertical with close top) hoisted and fixed in position including 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm -210 gms ) incl connections all as specified.

S&F 15 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

S&F 20 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

S&F Sinks made of stainless steel 1mm thick kitchen with plugs washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe bowl size 550mm x 400mm x230mm ,including cupling , wast pipe etc complete all as specified and directed.

S & F for PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber rings joints fixed to walls or floor of 75mm bore with suitable MS clamps any descriptions complete all as specified and as directed.

S&F PVC (SWR) bends any radius suitable for 75mm bore pipe provided with access door complete all as specified and directed.

S&F PVC (SWR) floor trap plain with CP grating including jointed with solvent cement of diameter 75mm complete all as specified and directed.

S & F Soap dish, vitreous China white, approximate size 160x 160x90mm fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F Brass chromium plated Tubular towel ring, 20mm dia, D type,complete all as specified and directed.

S&F bib taps cast copper alloy chromium plated fancy type (long body ) with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe.

S&F 15 mm dia Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed .

Cutting existing 20mm steel tubing for alterations or additions (Each cut measured)

S&F framed work such as grills, grating, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as directed.

Excavating in post holes ( or similar hoels ) each n exc 0.5 cum getting out of any type of soil, removing surplus soil to a distance n exc 50 mtr.

S&F mild steel rolled section conforming to Fe-290 (Gde E-165), as in main and cross beams, hip and jack rafters, purlins where connected to common rafters fixed with angle cleats and other connecting plates etc. complete all as specified and directed.

M&L for MS framed work of angle, tee, F.I, conforming to Fe-290 (Gde E-165), as in roof trusses including distance pieces, cleats etc. welding or riveted complete all as specified and directed.

M&L for mild steel work such as wind ties etc and similar work conforming to Fe 410-O, complete all as specified and directed.

M&L applying two coats of synthetic enamel paint over a coat of red oxide 0r zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.

M&L applying two coats of synthetic enamel paint over a coat of red oxide 0r zinc chromate primer including preparation of new steel or iron surfaces n. exc 10 cm width or girth, complete all as specified and directed.

S&F 6mm thick of size 605x605mm HSPC (high pressure stem cured) perprimetered self embossed, textured designer board E-Board classic to be fixed anodised aluminium snap grid / section size 605x605mm with main runner, cross tee and wall angle duly suspended with 4mm dia GI bar hangers 1200mm centre to centre both ways purlin from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified and directed by Engr-in-Charge.

S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based plain steel sheet of any colour as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil etc complete all as directed.

Hardcore of guage n exe. 63mm deposited spread and levelled in layers n.exe 15 CM thick watered and rammed to a true surface.

M&L PCC type B1 (1:2:4) 100mm thick as in flooring finish even and smooth without using extra cement complete all as specified and as directed.

M&L PCC type D2 (1:4:8) 75mm thick as in flooring finish even and rough without using extra cement complete all as specified and as directed.

M&L chequred cement concrete tiles 30cm X 30cm X 25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors incl 20mm screed bed in CM 1:6 complete all as specified and directed.

M&L for point wiring for one light/fan/call bell point controlled by one 5/6 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLSH, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 sqmm copper conductor multistrand FRLSH, PVC insulated (unsheathed) drawn into and including concealed PVC rigid conduit medium grade ISI marked including Modular GI sheet Metal flush Boxes of any way (as per site requirement) for mounting switches, sockets, fan regulators etc complete all as specified and as directed for the following:- (a) Wiring shall be done by using proper colour coding(b) Earth wire shall be of green colour all as directed by engr-in-charge. .

Description all as per serial item No 86 here-in-before but 6 Amp socket outlet on same board complete all as specified and directed by engr-in-charge..

Description all as per serial item No 86 here-in-before but socket outlet 6 Amps independent board complete all as specified and directed by engr-in-charge..

All as per item No 131 above but for 16 Amps on independent board with cables 2.5 sqmm size single core multistranded copper conductor FRLSH, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 2.5 sqmm copper conductor multistrand FRLSH, PVC insulated (unsheathed) drawn into and including concealed PVC rigid conduit medium grade ISI marked including Modular GI sheet Metal flush Boxes of any way (as per site requirement) for mounting switches, sockets, fan regulators etc complete all as specified and as directed for the following:- (a) Wiring shall be done by using proper colour coding(b) Earth wire shall be of green colour all as directed by engr-in-charge.

S&F Modular switch 1 way 6 A,1 module, 240 volts ISI marked complete all as specified and directed by engr-in-charge..

S&F Modular switch 1 way 16 A, 1 module, 240 volts ISI marked complete all as specified and directed by engr-in-charge..

Supply and fix Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed by Engineer-in-charge.

Supply and fix Socket, 6A - 2/3 pin combined 2 module, complete all as specified and as directed by Engineer-in-charge.

S&F ceiling rose, 3 terminal surface type complete all as specified and directed by engr-in-charge..

Supply and fix Water heater storage type, electric,capacity 25 litres.BEE 5 star rated complete all as directed by engr-in-charge.

S&F Single pole and neutral enclosure with 1 two pin and earth plug and a socket complete with one single pole C type MCB, 20 Amp, 240 volts ISI marked complete all as specified and directedby engr-in-charge.

Supply and fixing LED light fitting 1 x 20 Watt 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from celling rose complete all as directed by engr-in-charge..

S&F LED Bulb 9 watt with angle lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by engr-in-charge.

S & F Environmental friendly,ultra modern, energy saving, surface mounted,decorative oval bulk head edgy-fit LED 10/12 Watt luminaire comprising of high brightness LEDs complete all as specified and directedby engr-in-charge..

M&L distribution board sheet steel powder coated for MCB with suitable size of bus bar and neutral link earthing stud SPN 12 way 240 volts double door complete all as specified and directedby engr-in-charge..Note:- Distribution board and MCB's should be same make.

S &F of SPN 40 to 63 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed by engr-in-charge..

Supply and fixing MCB ‘B’ curve suitable for 230 volts AC supply, 06 to 32 Amps, SP with over load and short circuit protection and rupturing capacity not less than 10 KA, fixing in DB complete all as specified and as directed by Engineer-in-charge

M&L for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6.0 Sq mm for phase and neutral and one run of 6.0 Sq mm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through including medium grade ISI mark PVC concealed conduit fixed on wall. Note: Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and directed. Note : Wiring shall be done in proper colour coding.

Material and labour for Earthing complete with galvanised iron earth plate electrode of size 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including GI earthing wire of size 4 mm dia by means of GI bolts/nuts/washers and protected by 15 mm bore GI light grade pipe upto test point or upto main switch board fixing with 02 Nos nuts and bolts and protection pipe fixed with and including flat iron clamps, bolts, nuts and washers. Earth plate shall be surrounded by alternate packed layer 15 cm thick of charcoal or coke and common salt all around bottom and top. 20 mm bore GI medium grade pipe for watering and including funnel, wire mesh, PCC chamber pit made with PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) including necessary form work, excavation and earth work in any type of soil, returning filling and disposal of surplus soil to a distance not exceeding 50m, Pit cover 40mm thick made with RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) including TMT reinforcement 8mm dia @ 75mm c/c both way, MS handle 12mm dia, cover rest on MS angle iron frame 40x40x6mm embeded in concrete duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified & shown in electrical plate No. 3 of SSR 2009 (Part-I) complete all as specified and as directed by Engineer-in-charge. Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) Protection pipe and GI earthing wire upto test point or upto electric equipment from top of earth plate shall be included in the unit rate of this item. (iii) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge.

Supplying, laying, jointing and testing 25mm bore galvanised steel water tubing medium grade (ISI marked) laid in trenches with medium grade galvanised iron fitting (ISI marked) such as bends, Tees, sockets, nipples & unions, flanges, reducer etc complete all as specified and directed.

S & F Gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed of size 25 mm dia.

M & L for cutting of existing GI pipe line of size 25/40 mm size in position for making branch connection 50mm dia for inserting of Tee complete including Tee of required size and other fitting such as sockets, nipples, unions etc complete including making threads in position for both side as per site requirement.

Supplying and laying or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated aluminium stranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheather 16 Sq mm nominal cross sectional area 2 core, complete all as specified and directed

M&L for clean dry sand laid in trenches/ duct for bedding and cushioning to cable incuding spreading and levelling complete all as specified.

M&L for sub class ‘B’ brick old size protection cover laid dry flat transversally along the length of cable on cushioning with width equal to the length of brick complete all as specified and directed.

Material and labour for GI tubing (light grade) with all fitting laid in trenches or along pole/bldg or under road crossing and protection pipe or fixed alongwith wall/pole with necessary clamp nut bolt and washer bore of pipe 40mm complete all as specified and directed.

M/S AMAN ENTERPRISES (BID ID -3450279)

M/S NILIMA ENTERPRISES (BID ID -3455386)