Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.8 Cr
EMD Value
₹1.8 L
Closing Date
13 Mar 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
NBCC Bhawan
NBCC Bhawan
Shop/Factory Fabrication of Structural Steel including painting work as per BOQ/approved drawings and Transportation of finished fabricated materials at NTPC Project, Tandwa Jharkhand (Supply of raw structural steel as per Technical Specifications in vendor scope) for 2 nos. of 150-meter-high reinforced concrete single steel flue chimney Unit # 1& 2 of FGD system at 3 x 660 MW North Karanpura STPP, Jharkhand
NBCC/RBG/RAN/2023/63~EWda1c41ba2699309a842e64f8
NBCC/RBG/RAN/2023/63
Open Tender-Domestic
Civil Works General
NBCC Bhawan
₹11,800
₹1.8 L
13 Mar 2023
20 Feb 2023
13 Mar 2023
20 Feb 2023
13 Mar 2023
NO. (Unit 1) (Unit 2)
A23 Supply and Fabrication of high strength structural steel (E350 ) in built up section conforming to
IS:2062, in columns, beams, struts, monorails, stays, safety chains, ladders, gantry girders,
roof trusses, portals, laced purlins, space frames, hangers, wall beams, sheeting runners,
brackets, stiffeners, stub columns, bracings, cleats, base plates, splice plates,gussets, end
plates, steel frame grid over false ceiling, walkway platforms, ladders, stairs,stringers, treads,
landings, decking and seal plates, galleries etc including blast cleaning, providing & applying
primer,providing and applying intermediate, final and final finish coat of paint (blast cleaning,primer
and paint shall be paid separately as per item no C23, D23 & E23),connection design &
preparation of fabrication drgs, straightening, cutting, bending, rolling, grinding, machining,
drilling, welding, electrodes and other consumables, alignment, erection bolts & nuts (weight of
erection bolts, nuts and welds not payable), assembly, edge preparation, preheating (However,
permanent bolts are payable separately), assembly, edge preparation, preheating (min preheat and
interpass temperature of 120-140o C for welding over 20 mm thickness & use of low
hydrogen/ radiogenic electrodes), post heating, testing of welders, inspection of welds, visual
inspection, non destructive and special testing, rectification and correction of defective welding
works, production test plate, inspection and testing, erection scheme, protection against
damage in transit, stability of structures, installation of temporary structures, setting column bases,
surface preparation by means of manual or mechanical power tools as per IS:1477 part 1,
touch-up painting, rectification, dismantling and removal of all temporary structures (weight of
a temporary structuresofnot
For shop fabricated payable),
structural steeletcand
allfabricated
complete.materials
Includingtransported
appointment of a seperate
at NTPC Project, Tandwa
Jharkhand (Supply of raw structural steel in vendor scope) MT 44 44 88.0
B23 Supply and Fabrication of structural steel of grade E 250 in rolled/ built up section conforming to
IS:2062, mild steel rounds in columns, beams, struts, monorails, stays, safety chains, ladders, MS
gratings, gantry girders, roof trusses, portals, laced purlins, space frames, hangers, wall beams,
sheeting runners, brackets, stiffeners, stub columns, bracings, cleats, base plates, splice
plates,gussets, end plates, steel frame grid over false ceiling, walkway platforms, ladders,
stairs,stringers, treads, landings, decking and seal plates, galleries etc including blast
cleaning, providing & applying primer,providing and applying intermediate, final and final finish
coat of paint (blast cleaning,primer and paint shall be paid separately as per item no C23, D23 & E23),
connection design & preparation of fabrication drgs, straightening, cutting, bending, rolling, grinding,
machining, drilling, welding, electrodes and other consumables, alignment, erection bolts & nuts
(weight of erection bolts and nuts not payable), assembly, edge preparation, preheating / post
heating if required, testing of welders, inspection of welds, visual inspection, non
destructive and special testing, rectification and correction of defective welding works,
production test plate, inspection and testing, erection scheme, protection against damage in
transit, stability of structures, installation of temporary structures, setting column bases, surface
preparation by means of manual or mechanical power tools as per IS:1477 part 1, touch-up
painting, rectification, dismantling and removal of all temporary structures (weight of temporary
Digitally signed by
structures not payable), etc all complete. Including appointment of a seperate agency, approved by
NBCC/BHEL, for review and approval of fabrication drgs, in consultation with NBCC/BHEL. PRIYA PRIYA KUMARI
Page : 1 of 2
KUMARI 09:54:16 IST
ITEM SL Quantity Quantity
Description of Item Unit Total Quantity Rate (Rs.)
NO. (Unit 1) (Unit 2)
For shop fabricated structural steel(Supply of structural steel in vendor scope)
C23 Extra over SL NO. A23 & B23 for blast cleaning of steel structures to near white metal surface
conforming to Sa 2 ½ finish of ISO 8501-1 with surface profile 40-60 Micron and providing and
applying two component moisture curing zinc (ethyl) silicate primer coat (having minimum
80% of metallic Zinc content in dry film, solid by volume minimum 60% ±2%) of minimum 70
micron DFT including the cost of all labour, material, equipments, protection of surface and
cleaning, scoffolding, touch-up painting etc., complete as per drawings, specifications and MT 176 176 352.0
instructions of the Engineer. Zinc dust composition and properties shall be Type-II as perASTM D520-
00. Primer coat shall be applied in Shop immediately after blast cleaning by airless spray
technique.
D23 Extra over SL NO. A23 & B23 for providing and applying (by airless spray technique)
intermediate coat of two component polyamide cured epoxy with MIO Content
(containing lamellar MIO minimum 30% on pigment, solid by volume minimum 80% ±2%) of minimum
100 micron DFT after an interval of minimum 24 hours (from the application of primer coat)
and of approved make including the cost of all labour, material, equipments, protection and MT 176 176 352.0
cleaning, scoffolding, touch-up painting etc. all complete as per drawing and specifications.
E23 Extra over SL NO. A23 & B23 for providing and applying Finish coat of two-pack aliphatic
Isocyanate cured acrylic finish paint (solid by volume minimum 55% ±2%) with Gloss
retention (SSPC Paint Spec No 36, ASTM D 4587, D 2244, D 523) of Level 2 (after minimum 1000
hours exposure, Gloss loss less than 30 and colour change less than 2.0 ∆E) and minimum
70 micron DFT over steel sections already having intermediate coats, including the cost of all labour,
material, equipments, protection and cleaning, scoffolding etc. all complete as per drawing and
specifications. This coat shall be applied after an interval of minimum 24 hours (from the application of
sealer coat) and within six (6) months (from the completion of Intermediate coat). Colour and shade of
the coat shall be as approved by the NBCC/BHEL.
Digitally signed by
PRIYA PRIYA KUMARI
Page : 2 of 2
KUMARI 09:54:16 IST
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.06 MB
1 NIT - 63.pdf
Tender Document
2 SCC.pdf
Tender Document
4 GCC 2022 WITH AMENDMENT NO 01.pdf
Tender Document
5 Drawings.pdf
Tender Document
6 Technical Specifications.pdf
Tender Document
7 MILESTONE - Annexure-IA.pdf
Tender Document
3 BOQ.pdf
Tender Document
corrigendum-1441-Corr03 63.pdf
pdf • 0.14 MB
corrigendum-1340-Corri-2 63.pdf
pdf • 0.19 MB
addendum-a3b0c893726e-Corri-1 63.pdf
pdf • 0.12 MB
addendum-c9fbac3f83bd-Corri-1 63.pdf
pdf • 0.12 MB
addendum-069262d6ef20-Corri-1 63.pdf
pdf • 0.12 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .