BDJ - Proposed Track machine satellite depot - Electrical Arrangements.

Description:- "Transportation &Laying / clamping / threading of 4 Core XLPE cable (Size above70

as directed at site, with suitable clamps and termination duly supplying required Aluminium sockets, etc., Note: - Cable will be supplied by Railway from the Office of SSE/Electrical/Works/PGT."

concrete in an approved manner

Description:- Excavation of cable trench in all kinds of soil up to a depth of 1.0 Mtr. & Width of 0.3

and Width can be varied based on site Condition as directed by site engineers in charge. Concerned Measurement will be taken in Cubic meters.

Description:- Supply and laying /fixing of HDPE pipe 110mm dia pressure rating up to 4PN (Material

like T-Joints, L-Joints, shall be used at appropriate locations. So that cable can be easily inserted and removed wherever need arises

Description:- "Design, Fabrication, Supply, Erection, Testing and Commissioning of Medium Voltage main distribution board with suitable bus bar (Approx sixe 50x6mm) & Bus bar chamber. [Non- Essential - Panel] In coming 1) 1 No. of MCCB 4 Pole 200A, 36kA with Therml Magnetic Release,

Model No. DZ1F0100DXD1A 2) 4P 63A MCCB, 36kA - 1 Nos.Similar to L&T Model No. DZ1F0063DXD1A 3) 4P 160A MCCB,36kA - 1 Nos.Similar to L&T Model No. DZ1F0160DXD1A 4) RYB Indication lamp 5) 1No. of 3 Phase Multi function Meter. Note :- 1) Makes of MCB/MCCB/ELCB is L&T / Legrand / ABB / Siemens. 2) Drawing approval may be obtained before fabrication work. 3) Above said All MCCBs shall be of thermal magnetic release."

PALAKKAD DIVISION-ELECTRICAL/SOUTHERN RLY Description:- "Design, Fabrication, Supply, Erection, Testing and Commissioning of Medium Voltage main distribution board with suitable bus bar (Approx sixe 25x3mm) & Bus bar chamber.[ Essential -

CO11000OSOO Out Going 1) 4P 63A MCB - 4 Nos. 2) 4P 40A MCB - 1 No. 3) RYB Indication lamp 4) 1No. of 3 Phase Multi function Meter. Note :- 1) Makes of MCB/MCCB/ELCB is L&T / Legrand / ABB / Siemens. 2) Drawing approval may be obtained before fabrication work. 3) Above said All MCCBs shall be of thermal magnetic release."

Description:- "End termination using single brass compression gland of Size from 4 core 16 Sq.mm

including supply ad Fixing of said glands 2) PVC type glands may be used for cable termination in the poly carbonate box as directed by site engineer incharge."

Description:- "Transportation &Laying / clamping / threading of 4 Core XLPE cable (Size up to &

site, with suitable clamps, Aluminium sockets, etc., Note: - Cable will be supplied by Railway from the Office of SSE/Electrical/Works/PGT."

Description:- "Supply at site, erection, testing and commissioning of concealed, wall mounting metallic, 3-phase, double door, MCCB Distribution Board 6 way TPN - DB Double door (Out Going 6+6+6), powder coated having specification similar to L&T Model No.DEPGL006DD with the supply

to L&T Model No.CM97933OOK2 with Thermal Magnetic Release, adjustable over load, etc.., Out Going 3P MCB of 63 Amps - 4 Nos. 1P MCB of 6A to 32 A - 6 Nos. as outgoing including internal wiring connection, with earthing / neutral link, din channel complete with all accessories. Copper lugs shall be used for termination of wire in MCB'S and Aluminium sockets for cables termination and plastering and finishing to original level as directed by Engineer In charge."

Description:- "Supply at site, Erection, Testing and Commissioning of wall mounting metallic, powder coated Double Door 4Way TPN DB having specification similar to L&T Model no.

internal wiring using suitable size PVC insulated copper as directed by the site engineer in charge and supply and fixing following (Light DB) In coming 4P 40A MCB - 1 No. 4P 40A RCCB, 100mA - 1No. Out going 1P 6A to 32A MCB - 12 Nos. "

specification similar to model No.Mi 0100/Mi 0101 fitted with the followings 1) 100A 4 Way connector - 1Nos. "

engineer incharge

switch on the already erected modulr control /switch boards including internal wiring [ Socket - 2 Module, Switch 1 Module ]

20A SP MCB as Directed by site Engineer in charge

15 Description:- Supply and fixing of Heavy duty Air Circulator Wall Mounting Fan, Sweep size 600mm

Room as directed by site Engineer In Charge. "

Hensel model No.KF 0604 G as directed by site Engineer incharge

Industrial Cable

sheets on the top and fitted with 1 No. of three plate ceiling rose, 6A Flush type KITKAT fuse unit. The box will be fixed by the suitable size of GI clamps

20 PALAKKAD DIVISION-ELECTRICAL/SOUTHERN RLY 20 Description:- Supply and fixing of 3 plate ceiling rose as ditected by site engineer incharge.

Description:- "Supply and Single phase wiring by means of 2 nos. of 1.5 Sq.mm (P&N) and 1 No. of

multistranded flexible copper cable with ISI mark of approved make with coded color for Phase, Neutral and Earth through already erected PVC casing and capping or pipes, junction boxes, distribution boards etc., "

be fixed on the wall/ceiling/PF Shelter with suitable clamps. "

Rod fan hook arrangement In the junction box for Fixing of Ceiling fan. Hook to be provided at the time of Roof concreting as directed by site engineer incharge. "

efficient type of 1200 mm sweep, with 5 star rating having input power (max) 28 Watts, suitable for

with clamps including construction of hole on the wall as directed by site Engineer.

approved manner. "

site Engineer in charge. Note :- For the use of Bathroom/Mirror lightings. "

of the building with suitable GI pipe and clamps if necessary. GI pipe has to be bend as directed at site including wiring arrangements/Point wiring to the fittings.

controlling switch on the already erected modulr control /switch boards including internal wiring [ Socket - 2 Module, Switch 1 Module ]

Description:- Supply and wiring to light/fan points by means of by means of 2 nos. of 1.5 Sq.mm (P&N) and 1 No. of 2.5Sqmm (Earth) size Flame Retardant Low Smoke & Halogen (FR- LSH) PVC

color for Phase, Neutral & Earth through already erected PVC casing and capping or pipes, junction boxes, distribution boards etc., and including supply and fixing of modular type 1way controlling switches 6A on the already erected boards/boxes including supply and fixing of PVC round block, PVC angle holder/Ceiling rose

Description:- "Supply and Three phase wiring by means of 4 nos. of 6.0 Sq.mm (P&N) and 1No. of

multistranded flexible copper cable with ISI mark of approved make with coded color for Three Phases, Neutral and Earth Respectively through already erected PVC casing and capping or pipes, junction boxes, distribution boards etc., "

Description:- "Supply and Single phase wiring by means of 2 nos. of 4 Sq.mm (P&N) and 1 No. of 6

multistranded flexible copper cable with ISI mark of approved make with coded color for Phase, Neutral and Earth through already erected PVC casing and capping or pipes, junction boxes, distribution boards etc., "

34 PALAKKAD DIVISION-ELECTRICAL/SOUTHERN RLY Description:- "Supply and Single phase wiring by means of 2 nos. of 2.5 Sq.mm (P&N) and 1 No. of

multistranded flexible copper cable with ISI mark of approved make with coded color for Phase, Neutral and Earth through already erected PVC casing and capping or pipes, junction boxes, distribution boards etc., "

32mm dia for Open wiring including, tees, bends, junction boxes etc and plastering and finishing to original level & Wall thickness 1.4mm +/- 0.2mm

32mm dia for Concealed wiring including, tees, bends, junction boxes etc and plastering and finishing to original level & Wall thickness 1.4mm +/- 0.2mm.

20mm dia for Open wiring including, tees, bends, junction boxes etc and finishing to original level & Wall thickness 1.4mm +/- 0.2mm. "

& Wall thickness 1.6mm+/-0.2mm for Concealed Wiring including, tees, bends, junction boxes etc.., plastering and finishing to original level. "

frame & plate including plastering and finishing to original level. "

frame & plate including plastering and finishing to original level. "

frame & plate including plastering and finishing to original level. "

frame & plate including plastering and finishing to original level. "

frame & plate including plastering and finishing to original level. "

frame & plate including plastering and finishing to original level. "

45 Description:- Supply and Fixing of Dummy Plates as directed by site engineer in Charge.

specification similar tosimilar to L&T model No. 4421AD1for Submersible pump.

Description:- Supply and laying /fixing of HDPE pipe 50mm dia pressure rating up to 4PN (Material

like T-Joints, L-Joints, shall be used at appropriate locations. So that cable can be easily inserted and removed wherever need arises

with locking arrangements

Description:- "Supply of Concealed type Earthing. This consisting of supply at site, erection, testing and commissioning of G.I. Earth Electrode 50mm dia, 3000mm long, 'C' class (heavy duty/ISI marked supply and and fixing of earth inspection chamber, lid, as per CEE Drg. No.EL/P/TYPE-1022 with charcol & salt / Bentonite Compound Filling, which includes the cutting and removing of granite /

earth pit by suitable boring equipments. The earth pot shall be provided in level with flooring. The above includes reconstruction of the area of granite / marble / kadappa stone / cement concrete etc.., to bring back to the original condition duly providing granite / marble / kadappa stone / cement concrete etc.., The earth pot shall be painted black and earth value to be recorded" PALAKKAD DIVISION-ELECTRICAL/SOUTHERN RLY

unit with 20A-SP-MCB having the specification similar to Havells model No. DHDMCSN0251020 or similar /superior makes with sheet steel enclosure including internal wiring (For Provision of Split AC)

Description:- Supply and concealing of sheet metal boxes with 2-way module along with modular

and fixing of 20A , 1way modular switch on the above said 2 way module box (Legrand or similar makes) for AC

Description:- "Provision of Inspection pit of 0.6m x 0.6 m x 0.6 m depth (Inner dimensions) for

be of Concrete slab/ heavy duty FRP/ cast iron as directed by site Engineer in charge. Note :- 1) Edges of the Top cover and top of the Inspection pit shall be protected by Suitable MS / GI ""L Angle"" as directed by site Engineer in charge."

Description:- "Supply at site, erection, testing and commissioning of 8m LED Mini Mast Lighting System with 6 Nos. of 200W LED Flood light fittings as per the detailed specification enclosed

3Phase Motor with suitable contactor, Timer & Push button has to be accommodate in the mini mast. Note :- 1) The rate inclusive of all taxes & duties. 2) The said scope of work includes Control panel. Same has to be suppy, erection, testing & Commissioning as directed by the site enginner incharge by the contractor."

Description:- "Supply at site, erection, testing and commissioning of concealed, wall mounting metallic, 3-phase, double door, MCCB Distribution Board 4 way TPN - DB Double door (Out Going 4+4+4), powder coated having specification similar to L&T Model No.DETPE004DDS with the supply

MCB of 6-32A - 8 Nos. 4P MCB of 32A - 1 Nos. as outgoing including internal wiring connection, with earthing / neutral link, din channel complete with all accessories. Copper lugs shall be used for termination of wire in MCB'S and Aluminium sockets for cables termination and plastering and finishing to original level as directed by Engineer In charge."

Description:- "Supply at site, erection, testing and commissioning of concealed, wall mounting metallic, 3-phase, double door, MCCB Distribution Board 4 way TPN - DB Double door (Out Going 4+4+4), powder coated having specification similar to L&T Model No.DETPE004DDS with the supply

MCB of 6-32A - 4 Nos. 4P MCB of 63A - 1 Nos. as outgoing including internal wiring connection, with earthing / neutral link, din channel complete with all accessories. Copper lugs shall be used for termination of wire in MCB'S and Aluminium sockets for cables termination and plastering and finishing to original level as directed by Engineer In charge."

directed by site Engineer In Charge. "

Engineer In Charge. "

10A SP MCB as Directed by site Engineer in charge

along with modular frame & plate as directed by site engineer in Charge.

DBMPS463SD including supply and fixing 1No. of 63A 4pole MCB as directed by site Engineer incharge

25mm dia for Open wiring including, tees, bends, junction boxes etc and finishing to original level & Wall thickness 1.4mm +/- 0.2mm "

Industrial Cable with ISI mark of approved make PALAKKAD DIVISION-ELECTRICAL/SOUTHERN RLY

Industrial Cable

Industrial Cable

Description:- "Supply and erection of 300 x 50mm size 14 SWG Hot dipped GI perforated tray for

work includes supply and fixing of suitable length & size of thread rods and strut channels etc.., including all other accessories for successful completion of the above work"

Switch Boxes, Tray etc.., with suitable fixing arrangements as directed by site Engineer-in-charge

casing capping, PVC pipes, refrigerant pipes etc. through the same as directed by site Engineer incharge

Description:- "Supply, erection, testing and commissioning of Octagonal poles of 4 m high with

casting of cement concrete foundation & muffing Including Supply,fixing of 40W to 50W LED Street light and wiring to the LED Fittings. Note :-Drawing to be submitted for approval before fabrication of Octagonal poles."

Description:- Excavation and refilling of cable trench across the Railway track 30cm width and

contamination of soil and rearranging the formation to original level. Depth can be relaxed by the site engineer as per the site condition and measurement will be recorded based on the volume of the trench under the formation.

GI clams at every 50 cm including plain coupling, Tees and other accessories.

Description:- "Design, supply and erection of control panel unit consisting of 4 Nos of SMPS units

for SMPS Input supply voltage : 180 V to 260V AC 50 Hz , Output voltage shall be 24 V DC (+/-) 1% Regulation-CV Out put current -Each SMPS 10 Amps, Ripple < 200 mv. Protection : short circuit / over voltage protection"

type similar to model No.Mi 0200/Mi 0201 fitted with the followings 1) 60A 4 Way connector - 1Nos. 2) 2P 2A MCB - 4Nos."

10+4+2W) with IP 65 protection necesssary hardware material suitable to work on 24 v dc. 3 dimensional type for pit lighting. "