Depost work of Thiruvananthapuram corporation -Extension Works At Various Places Of Vellar Ward Under WW Section Vandithadam

Amount

Pipe laying

15.43.2:Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in-Charge:Bituminous road

100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.

100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals.

100.9.6:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 63 mm nominal outside diameter pipes.

100.9.9:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 110 mm nominal outside diameter pipes.

100.31.1.1:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 80mm diameter, Class I.

100.31.1.2:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 100mm diameter, Class I.

OD26498/2024-2025:Alteration of house connection from the existing main up to 200 mm PVC/AC/CI Pipe , boring the main, supplying and fitting suitable specials etc. and connecting the newly laid main, testing the joints etc. complete as per the direction of Engineer incharge

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

OD135587/2024-2025:Bailing out water with 5 HP engine and pumpset including conveyance to the site, errection, dismantling and taking back of engine and pump, cost of fuel lubricating oil and other stores pay of staff etc. complete.<br>NEW DATA (Prepared based on PHED SDB - Item No.1070

OD26509/2024-2025:Providing interconnection from existing PVC main up to 200mm dia, upto a length of 05m using 25mm Indian Standard Class 6 uPVC pipe and uPVC / GM / Brass specials viz. brass ferrule, GM full way wheel valve, Elbow, MTA, FTA, couplers, PVC service saddle piece of suitable size etc. and connecting with the mains,testing the joints etc. complete including trenching and refilling in all kinds of soil up to a depth of 1.50m for main line tracing and trench of average cross section 0.3m x 0.75m for laying connection pipe and service pipe,lighting, watching, providing caution boards/tape, traffic control etc. complete including cost of materials, hire charges for tools, cost of consumables and labour charges etc complete as per the direction of the departmental officers

OD189190/2024-2025:Providing and fixing suitable size(preferably not less than 140 mm) protection tube for controlling valves as per direction of engineer in charges

Material supply

100.98.234:Supply of PVC Pipe, 10kg/cm2, 63mm Dia.

100.98.237:Supply of PVC Pipe, 10kg/cm2, 110mm Dia.

100.98.457:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 80mm.

100.98.458:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 100mm.

Mohandas M (BID ID -2106624)

RATHEESH S (BID ID -2107597)

MUHZIN N (BID ID -2107805)

K RAMACHANDRAN NAIR (BID ID -2105128)

Bidder Name

Vimal Kumar P

K RAMACHANDRAN NAIR

RATHEESH S

Mohandas M

MUHZIN N