Spl repairs for officers married accommodation No P-9 (Bunglow) at Birpur and constr of 01x Car parking shed for 06 x cars at P-4 bldg of Complex of NCC Directorate Uk, under GE Dehradun.

Amount

Dismantling asbestos cement (corugated or semicorrugated etc) sheets, in roof covering including ridge complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to walls etc fixed with self tapping screws as specified.

S&F pre-painted galvalume aluminium Zinc coating GI based plain steel sheet to match with profile sheet in 0.50mm thick of an approved of an colour having tensile strenth of 550 Mpa as in ridge,vally/gutter of roof , fixed with self tapping screws as specified.

Dismantling wall and ceiling boards (fibu, pulp, insulation etc) or insulation boards/slabs/blankets any thickness incl cover fillets complete all as specified and directed.

Providing & fixing tiled false ceiling Perforated Accoustic GYP board tile Ivory painted (High Pressure Steam cured) of 6mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips or 3mm dia GI wire spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm. All 'T'' sections shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, all complete at all heights as per direction of Engineer-in-Charge. Make- Everest/ Saint Gobin or equivalent as approved by GE.

M&L for false ceiling made out of E-board classic of size 600x600x4mm thick, GI frame consisting of main Tee of size 38.50x24.00 mm and cross Tee of size 28.50x24.00mm thick made out of PGI sheet 0.30mm thick doubled at web and single at flange, flange covered with powder coated sheet 0.25mm thick and angle 24.00x24.00x0.4mm thick powder coated suspended with GI wire 3mm dia and up to 2mtr long complete including pluging fixing of angle to brick walls with steel rawl plugs @450mm c/c complete all as specified and directed by Engr-in-Charge.

Dismantling timber scantlings 40 sq. cm and over in section, framed or unframed work in any position complete all as specified and directed.

S &F Second class hard-wood timber scantling wrought over 40 sqcm in section, framed and fixed and in any position complete all as specified.

Dismantling of wrought iron or mild steel work of any description not otherwise specifically provided for complete all as specified and directed.

S & F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, etc. conforming FE-290 (Gde E-165) complete all as specified.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concretebut excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 (using old size bricks) complete all as specified and directed.

Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc. complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth complete all as specified and as directed by Engr-in-Charge.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth complete all as specified and as directed by Engr-in-Charge.

M & L rendering 10mm thick in cement mortar 1:3 on fair faces of concrete work finished even and smooth as in ceiling complete all as specified and directed.

M&L for preparation of new plastered surface of walls including cornices and applying two coats of distemper oil emulsion over and including 2-3mm thick wall care putty over primer coat, finish surface even & smooth by roller complete all as specified and directed.

M&L for complete removal of existing treatment from walls incl cornices and applying two coats of distemper oil emulsion over and including 2-3mm thick wall care putty over primer coat, finish wall surface even & smooth by roller complete all as specified and directed.

M&L for two coats of white wash on ceiling etc including preparation of surfaces complete all as directed by the Engineer-in-Charge.

M&L for preparation of new plastered / POP / Putty surfaces of walls and applying two coats of of weather proof exterior emulsion paint of approved colour over a coat of primer complete all as specified and directed.

M&L complete removal of existing treatment from painted surfaces of external wall by scrapping, wire brush, washing with water and applying two coats of exterior grade 1st quality weather proof coat paints over a coat of alkali resistant primer complete all as specified and directed. Make : Berger XP advance (long life exterior emulsion paint), Asian Paints (Apex Ultima), Nerolac (Excel total)

M&L for two coat of synthetic enamel paint over a coat of primer including preparation on new steel surfaces of any description over 10 cm width or girth complete all as specified and directed.

M&L one coat of synthetic enamel paint on old Steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all specified and directed.

M&L for preparation of new wooden painted surfaces including preparation and applying two coat of synthetic enamel paint any description, over a coat of pink primer, not overwise described, over 10 cm width/girth complete all as specified and directed.

M&L for preparation of old painted surfaces of wood over 10 cm width/girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismentling floor hearth or wall tiling including cement motor bedding (But not backing) and removing rubbish off the premises complete all as specified and directed.

M&L for Vitrified Ceramic tiles Dark shed /double charged 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. including screed bed 15 mm thick in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile adhesive complete all as specified.

All as per item No 27 here-in - above but as in skirting including 10 mm thick rendering in cement mortar 1:4, complete all as specified.

M&L non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 6- 7 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and directed.

M&L for coloured Glazed ceramic tiles in vertical surfaces of size 350mm x 250mm x 7mm/ 450x 350 x 7mm thick over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed.

Demolition of Stone slabs and tiles laid, bedded and jointed in any mortar and in any position and of any description as in floors, aprons etc. complete all as specified.

M&L for 18 to 20mm thick, granite work of (any type) table rubbed polished in steps, jambs, pillar windowcill, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigments to match with the shade of granite complete all as specified.

M&L 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement and demolition of existing old cement concrete of plinth protection in ground floor and paving below or above ground level complete.

M&L for Cement concrete type D2 1:4:8 (using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for heavy duty coloured vitrified tile 300mmx300mm x 9-10mm thick exterior grade set and jointed with neat cement slurry and pointed in coloured of white cement to match all as specified. Make - Durastone/ Kajaria/ Johnson etc as approved by GE.

M&L for pre-polished pavement coloured chequred tiles glossy finish of size not less than 300mm x 300mm x 20-22mm thick with anti skid properties laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L For PCC 1:2:4 type B-1( using 20mm graded aggregate ) as in copping, Kneelers, apex stones bed plates , Kerbs stone, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed

Taking down chowkat with shutter n. exc 1.5 Sqm each without taking off shutter from frame complete all as specified and as directed by Engr-in-Charge.

Taking down chowkat with shutter exc 1.5 Sqm but n.exc 4 Sqm each without taking off shutter from frame complete all as specified and as directed by Engr-in-Charge.

Taking down shutters of any description exc 1 sqm n.exc 2 sqm each and refixing in same opening after necesssary repair complete all as specified.

Taking down shutters of any description n.exc 1 sqm each complete all as specified and directed.

Material and labour for Second class hard wood plain solid straight chowkats and frames wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed by the Engineer-in-Charge.

M&L for 35 mm thick flush shutters, solid core construction, with block board core and plywood face, pannels, one face is covered with decorative face veneer with lipping/frame to match including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed.

S & F 35mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

S & F 30 mm thick second class hardwood glazed and Skelton factory made window/ventilator shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass / gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24(b) and as directed

S&F factory made steel windows with side hung shutters including box type hinges with MS handles and tower bolts complete with glazing bars dovetailed or welded with one shop coat of primer complete all as specified and directed.

S&F factory made steel windows with side hung shutters including box type hinges with MS handles and tower bolts complete without glazing bars, as fly proof shutters with one shop coat of primer complete all as specified and directed.

S&F solid PVC door frame of size 50mmx 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and fixed with screws and rawl plugs complete all as specified and directed.

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as shown in SSR Part – II 2010 and as directed by GE/Engineer-in-Charge.

S&F mild steel flat iron for hold fasts and similar articles confirming to Fe-290 grade E - 165 complete all as specified and directed.

M&L cutting holes in brick wall built in cement mortar exc half brick but n.exc one brick for inserting or cement concrete 1:2:4 hold fast etc and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required.

S&F 200 mm long, solid in one piece stainless steel 204 grade barrel tower bolts complete all as specified and directed by Engr-in-charge.

S&F 150 mm long, solid in one piece stainless steel 204 grade barrel tower bolts complete all as specified and directed.

S&F 150mm size solid in one piece stainless steel 204 grade handles, fixed with stainless steel screwsall as directed complete all as specified and directed by Engr-in-Charge.

S&F 125mm size solid in one piece stainless steel 204 grade handles, fixed with stainless steel screws all as directed complete all as specified and directed by Engr-in-Charge.

S&F 100 mm size stainless steel 204 grade butt hinges and fixed with stainless steel screws, complete all as specified and directed by Engr-in-Charge.

S&F 75 mm size MS butt hinges medium weight cold rolled fixed/ welded to frame complete all as directed.

S&F stainless steel sliding door bolts 204 grade, hasp and staple type with bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 250mm long complete all as specified and directed.

S&F Stainless steel 304 grade wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples with 8% nickle complete all as specified and directed.

Hacking out old broken glass ( any thickness , size, quality, or description) from wooden frame glazed with putty or fixed with beads all as specified and directed

M & L sheet glass ordinary quality 4mm thick and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc. .5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed.

S&F WPC board 18 mm thick for cup board doors & shelves with decorative finish complete fixed in repairs complete all as specified and as directed.

S & F Continuous (Piano) hinges, mild steel, bright finished or stainless steel 304 grade, width of flaps (When open) 30 mm complete all as specified and directed.

S&F stainless steel CP semi hydraulic albehari hinges all as sample approved by Engr-in-Charge

S&F magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F in repair peg set of five stainless steel fixed on CP steel plate 304 grade including fixing screw as per approved sample.

S&F in repairs glass corner shelf suitable size made of 5mm thick toughned glass complete all as specified.

S&F in repair 25 mm dia stainless steel polished 204 grade drapery rod 1mm thick with final decorative, including brackets, decorative finials at both ends complete all as speccified and directed as per approved sample complete all as specified and directed.

S & F Solid PVC wall Lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing incl removing existing unserviceable wall linning all as specified.

S&F in repairs CP brass Soap dish 6 inches complete all as specified and directed.

S&F in repair PVC Shelves 450mm size of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105 gms)

S&F in repair plate rack 300mm and size 100 x 80 cm made out of 1.00 mm thick stainless steel complete all as specified and as directed.

S&F in repairs stainless steel kitchen sinks with draining board made of stainless steel 1 mm thick, with plugs, washers and wastes, including bedding lime cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified.

Demolition of reinforced cement concrete as in shelves, chajjas, slabs and similar work and repair the disturbed surface to match the existing complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and colums, in floors, roofs, landing balconies, canopies, deck slabs, chajja and in shelves and the like, complete all as specified and directed. Note : The work will be carried out upto tripple storey builing the rate of scafolding is included for this item also.

M&L for use and waste form work to soffits of suspended slab such as roof slabs, floor slabs, chajjas, landing and similar works, not exceeding 200mm thick for fair finished surfaces of concrete complete all as specified and directed.

Use and waste form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs, sides of RCC/PCC bands in walls, horizontal or sloping and similar works not exc. 20 cm wide for fair finished surfaces of concrete complete all as specified and directed.

S&F TMT MS bar 8 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia as specified .

S&F in repair framed work such as grills,gratings,etc., with ends of bars shoulderedor riveted, or forged into spikes; framed guard bars;barred iron doors and similar work conforming to Fe 210,Gde E-165 complete all as specified and as directed by the Engineer-in-Charge.

S&F mild steel, plain, black sheet 1.60 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

S & F Acrylic PVC sheeting 2-3 mm thick fixed with screw and washer in gate , wall etc complete all as specified and as directed by Engr-in-Charge.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing complete all as specified and as directed.

M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth complete all as specified and as directed.

S&F galvanised steel tubing, medium grade (ISI marked) with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing complete all as specified and as directed..

S&F galvanised steel tubing, medium grade (ISI marked) with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing complete all as specified and as directed..

S&F rotational moulded polyethylene 500 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) three layer external and internal white hoisted and fixed in position including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia in replacemet complete all as specified and directed.

S&F in repair ball valve high pressure of PTMT with epoxy coated alum rod & high density plastic ball screwed for 15mm bore iron pipe and fixed ( minimum weight 15mm -142 gms) complete all as specified and directed.

S&F in repair CP toilet paper holder as approved by Engr-in-Charge complete all as specified.

S&F in repair CP Brass 3 in 1 hot & cold 15 mm dia wall mixer for mixing hot & cold water with telephonic shower provn with connecting legs & flanges complete all as specified and directed. Make : Jaquar Model No CON 281KN, HSN 1929 & OHS 1989/Marc ESS547A & ES 531 (Telephonic shower) ES 549 (Shower) ES (Shower) or equivalent in Cera / Hindware.

S&F in repair CP brass Central hole basin mixer fancy type 15mm dia all as specified and directed. Make- Jaquar product code:50L-CHR-6167B or equivalent in Hindware/ Parryware.

S&F in repair CP brass bib tap fancy type short body15mm bore screwed for iron pipe or for brass ferrule all as specified in SSR Part I . Make : Jaquar product code: EKO-CHR-33037 or equivalent in Hindware / Parryware.

S&F in repair 15mm bore Bib taps long body, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make :- JAQUAR CAT Part No ALI-85037/Hindweare CAT Part No F-370004/Prayag CAT Part No S9906

S&F in repair 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. Make :- JAQUAR Cat Part No FON-40053/Hindware Cat Part No F160017/Prayag Cat No 9410

S&F in repair PVC Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed and approved by Engr-in-Charge. Make :- JAQUAR CAT Part No-ALD CHR 565 or equivalent in Hindware/ Parryware.

S&F in repairs 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified.

S&F in repair brass chromium plated ovehead shower with shower arm complete all as specified and directed. Make : - Parryware Cat Part No T9985A1(Shower) & T-9999A1(Arm)/Hindware Cat Part No F160054 (Shower) & F190016(Arm)/Jaquar Cat Part No OHS 1999 (Shower) & SHA479L300 (Arm).

S&F in repairs vitreous china water closet (Padestal pattern) fancy type including fixing bolts, flushing cistern dual flush type of total capacity 10 ltr incl PVC white Seat cover and incl lime concrete bedding including 100mm CI 'P' or 'S' trap complete all as directed.

S&F in repair viterous china squatting pan (orissa pattern) long pan size 580x440mm white with integral footrest with cast iron spun 600 mm long 'P' trap (SI 3989 1984), set in cement concrete type B-1 (1:2:4) complete (excluding flushing cistern and flush pipe) complete all as specified and directed by Engr-in-charge.

S&F in repair 08 Litr Dual capacity PVC low level flushing cistern including PVC syphon and float valve with PVC long bend for out let, fixing with WC complete all as specified and directed by Engr-in-charge

S&F of 40mm outer dia of CPVC pipe class 1 on wall /ceiling or laying in floor incl of all fitting i.e elbow,tee and socket etc, complete all as specified

S&F vitreous china, white, oval shape counter top wash hand basin, flat size 555 x 425 x 195 mm cutting for and pinning in ends of brackets if any, including suitable waste pipe, 32mm bore CP waste coupling (half or full threaded) complete all as specified and directed. Make - Jaquar Cat Part No FLS-WHT-5701 or equivalent in parryware / hindware /Cera as approved by GE.

S&F 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engr-in-Charge.Make : Jaquar Cat Part No VGP 81001/Hindware Cat Part No F370001/Parryware Cat Part NoG9802A1

S&F 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. Make :- JAQUAR Cat Part No FON-40053/Hindware Cat Part No F160017/Prayag Cat No 9410

S&F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and directed.

Taking down CI/AC/PVC pipes incl fittings upto 110mm dia and removing from site complete all as specified and directed.

S&F in repairs for 100mm/ 75 mm dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof complete all as specified and directed.

S&F PVC (SWR) pipes of 110 mm dia, single socketed fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes of 75 mm dia, single socketed fixed to walls complete all as specified and directed.

S&F PVC (SWR) bends of 110 mm dia, any radius complete all as specified and directed.

S&F PVC (SWR) bends of 75 mm dia, any radius complete all as specified and directed.

S&F PVC (SWR) junction single Tee equal or unequal 110 mm dia complete all as specified and directed.

S&F PV C (SWR) junction single Tee equal or unequal 75 mm dia complete all as specified and directed.

S&F PVC (SWR) floor trap, plain with grating including jointed with solvent cement of 75 mm outlet dia complete all as specified and directed.

S&F in repairs PVC waste pipe not less than 60cm long with PVC coupler for kitchen sink, WHB, urinal, etc complete all as specified and directed by Engr-in-Charge.

S&F in repair stainless steel coupling with waste pipe for stainless steel sink etc complete all as specified and directed by Engr-in-Charge.

S&F in repair CP steel Grating round with steel frame with hinge 100mm dia all as sample approved by Engr-in-charge.

S&F in repairs fancy type 5.50mm thick looking mirror with PVC moulding 40mm wide all around with back 5mm thick PVC board of size 450x600mm size complete all as specified and directed.

Excavation in trenches, not exc 1.5m wide and not exc 1.5m in depth for laying of Sewage line, manholes etc and getting out in any type of soil, etc complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm thick etc complete all as specified and directed.

Removing excavated material (soils) to a distance not exc 50m and depositing where directed at a level n.exc 1.5 above starting point omplete all as specified and directed.

Cutting into existing manholes for connecting new drains 150mm bore pipe including removing existing branch drain pipes of 150/200mm bore & benching to form branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) surface finished and reforming benching as required and making good surface with plaster etc to match existing , etc complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or Reinforecd concrete) set in cement mortar 150 mm internal dia complete all as specified.

S&F 150mm internal dia of pipe salt glazed stoneware drain pipes, laid in trenches and jointed in cement & sand mortar 1:1, complete all as specified and directed.

M&L for providing cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) 100mm thick bed for 150mm bore pipes including packing under and haunching against the sides of pipes after they are laid tested, etc complete all as specified and directed.

M&L for salt glazed stone ware gully traps square or rounded mouthed type ‘P’ of size 150x150mm embedded in PCC with necessary brick work . plastering etc complete and connecting to pipe all as directed by Engineer-in-charge.

M&L for 65 mm thick vibromatic reinforced precast cement concrete 1:1:2 (using 20mm graded stone aggregate) with 2mm thick mild steel CR sheet around painted with 2 coats of bituminous paint , as in man hole cover slabs finish fair even and smooth without using extra cement ( Top surface will be chequred finish) including necessary form work, 100 mm long handle of 12mm dia round bar counter sunk by 25mm welded to reinforcement complete all as specified and directed by Engr-in-charge (Note : CA No and date will be engraved on covers. Reinforcement shall be measured and paid saperately. Curing will carried out with ponding method)

M&L for excavation over areas n.exc 1.50m deep and getting out in soft/loose soil complete all as specified and directed.

M&L for PCC (1:3:6) type C 2 (using 40 mm graded stone aggregate) as in foundation filling, sub base/ mass concrete levelling course etc complete all as specified and directed.

S&F rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-410-W (Gde-E-250) quality A complete all as specified and directed.

S&F 11 to 15 mm dia mild steel screw bolt (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm but n. exc 10 cm long complete all as specified and directed

Surface excavation n.exc. 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L for hard core of broken stone or boulder of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc. 15cm thick, watered and well rammed to a true surface complete all as specified and directed.

S&F 110 mm dia bore PVC (SWR) soil waste and vent pipe in any length without ears laid in floors, trenches complete all as specified.

M&L for 100 mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in floors and pavings, laid in alternate bays, and filling the joints with and including bitumen and sand 1:3 by weight, surface finished even and smooth with using extra cement complete all as specified and directed.

Taking down carefully copper/Aluminum point wiring (light, fan socket and power) complete including switches, ceiling rose lamp holder and regulator etc and removing from site and making good disturbed surfaces of walls/floors etc complete all as specified and directed by Eng-in-charge.

M&L for point wiring with 1.5 Sqmm. (nominal area) FRLS, single core PVC insulated 1100 Volts, grade multistranded copper conductor unsheathed in and including concealed PVC conduit medium duty 20 mm dia or higher and heavy grade conduit fittings and heavy duty accessories with suitable size of sunk type cast iron or pressed steel terminal box 1.6mm thick for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, one green colour FRLS cable of same size as earth wire up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge of following:- Note: The wiring to be done as per IE rule and maintain colour code accordingly.

(a) One light point/ ceiling fan point/ Exhaust fan point controlled by one-one way switch.

(b) One bell point controlled by one-one way switch.

(c) One three pin 5 Amp socket on same board with other switches.

(d) One three pin 5 Amp socket on independent board

All as per item No.137.00 above but one 3 pin socket outlet 15 Amp independent, cable 2.5 Sqmm Pvc insulated unsheathed multistranded copper cable FRLS for phase & neutral, with 2.5Sqmm PVC insulated unsheathed multistranded copper conductor cable FRLS as earth continuity conductor.

S&F switch piano flush, button type 5 Amp SP 250 V AC complete all as specified & directed.

S&F switch piano flush button type 15 Amps SP 250 V AC complete all as specified & directed.

S&F socket outlet multipurpose 3 Pin 5 Amp and 2 Pin 5 Amps 250 V AC complete all as specified & directed.

S&F socket outlet two in one three pin 5 Amp and 15 Amp 2 module 120 W flush type complete al as specified.

S&F Bell switch paino flush button type 5 Amp complete all as specified.

S&F ding dong bell AC 230 V single pole complete all as specified and directed .

S&F step type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts 6 Ampds 400 watts.

S&F ceiling rose, 3 terminal/PVC/polycarbonate, isolated body 250 V AC.

M&L lamp holder insulated body with back plate suitable for angle and batten fitting complete all as specified.

S&F in replacement of U/S Tamper Proof electronic single phase whole current energy meter (LCD Display) 10 Amp to 60 Amp, 240 volt class 1.03 and class 2.05 AC supply including cable connection, proper sealing with lead. The meter shall comply with the latest version of IS-13779 with atleast 2 anti tamper LED indication of line load reversal and earth loading indication including electrical connection with existing system and sealing properly including push fit type pvc box complete. The meter shall work satisfactory with guarantee accuracy as per limit of IS-13779. The meter shall be fixed on existing steel boxes on wall complete all as specified and directed. (Note: Old U/S Meter shall be deposited to E/M store yard). Make:- L&T/ Legrand/Secure/BHEL.

M&L sub main wiring with 2 Single core PVC insulated unsheathed FRLS cable 1100 Volts grade heavy duty copper conductor multistranded of size 10 Sq.mm. (nominal area) drawing in and including 20 mm. dia or higher PVC concealed conduit heavy duty accessories and fittings. PVC insulated unsheathed FRLS cable copper conductor multistranded of size 6 Sq. mm. as earth wire upto common earth and connected to earth dolly in replacement complete all as specified & directed. Note:-2 runs of 10 Sqmm size PVC copper cable, one run 6 sqmm earth wire and one run of PVC conduit shall be measured as one unit length.

S&F sheet metal enclosures 240 volt with 200 Amp rated bus bar for double door 6 way DB,s IP-43 IK 09 metal door suitable for one MCB SPN as incoming and 06 MCB SP as out going complete all as specified and directed.

S&F sheet metal enclosures Triple pole and neutral double door 415 Volt 4 way DBs IP-43 IK- 09 Vertical type suitable for 200 Ams rated bus bar & one MCCB 100 Amp as incoming and 12 MCB SP as outgoing complete all as specified and directed .

S&F MCB double pole 240 Volt 10 KA 40 Amp 'B' series conforming to ISI marked complete all as specified & directed .

S&F MCB single pole and 240 volt 10 KA 5-32 Amp 'B' series conforming to ISI marked all as specified and directed .

S&F MCCB 415 Volt 16 KA 4 pole 125 Amp magnetic trip release & setting as incoming with fixing arrangement complete all as specified and directed.

S&F in replacement wall mounted tube light fitting 1x20/22 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed. Make: Philips cat part No TMC 501P1xT LED 22WP-3241(Tube Batten) and MAS LE$D 1200mm 18W-865-T-81 (Tube) / Wipro Cat part No WI0922208 (Tube Batten) LL13-181-65SE (Tube)/ Havells Cat Part No LUMILINEPLUSBS20WLED865SPCSS (Tube Batten)CRYSTAL1213T8DSTL20WLED865SGLASS(TUBE DOUBLE SIDE)

S&F in replacement LED light fitting decorative wall mounting SS brush finish fixture with frosted glass suitable for upto 1x40 watt mini glass lamp with and including one no 12 watt LED lamp. complete with accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable sizeAs per Havells Cat Part NO LHFOAJE1TN1IO60 or equivelent in Bajaj/ Philips.

S&F mirror light decorative compact luminarious with decorative ends caps 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size . Make Havells Cat No Edgelite or equilent in Philips/Wipro

S & F high efficiency LED bulbs 1 X 12 watt that can be used as a ready replacement for existing GLS ad CFL direct fit in holder complete all as specified and directed.

Supply and Fixing Integral LED Street Light Luminaire comprising of pressure die cast aluminum housing heat resistant toughened glass with frame IP-65 protection road way luminaries with high power LED 60 watt with efficiency 100 lumen/watt at system level, CCT>5700K, with average life class 50,000 burning hours, complete all as specified and directed. Make:- Crompton model No. LSTP-45-CDL/Havells model No. ENDURAPEARLNEOSL 40WLED757PASYTOPC /Philips Cat Part No BRP409LED CW036MRFGIPSUGR and syska SSK-ST-40W including taking out old unserviceable street light.

S&F in replacement of ceiling fan 1200 mm sweep single phase 230 volts double ball bearing with down rod , canopy, blades etc BEE 5 star rated including connecting with twisted three cord flaxible copper conductor cable (23/.0076 ) from ceiling rose to connector of fan comlete all as specified and directed. ( Note: Old unserviceable ceiling fan will be deposited in E/M store yard. )

S&F in replacement air ventilation fan matalic body 300mm, 900 RPM, single phase, 230V AC including necessary, M&L for making hole fixing arrangement on wall with frame holdfastner, bolt, washer etc including connection with twisted white three core flexible copper multistranded conductor cabl from ceiling rose to connector all a directed by Engineer-in-charge. Make:- Havells cat part No. Ventil Air DXWHT, CG cat No. BRISKAIR or equivalent in Orient/ Bajaj .Note: old unserviceable fan shall be deposite in E/M yard.

S&F in replacement of Geyser vertical mount type 25 Ltrs capacity five star rated , shockproof and rust proof metal body compact size including two nos PVC connection heavy duty and connecting with all fixing arrangement of nuts & bolts and fixing on wall complete all as specified & directed . MAKE: BAJAJ, RECOLD,/ HAVELLS . ( Note: old unserviceable Geyser will be deposited in E/ M store yard )

S & F Sheet metal enclosure SPN with a two pin and earth plug and socket complete with one 240 Volts 20 amp single pole MCB complete all as specrified & directed

M&L dry clean sand filling in trenches around underground cable, complete all as specified and directed.

Supply and laying of bricks sub class ‘B’ as protection to UG cable old size laid dry and flat adjoining each other all as specified & directed.

Supply, laying, jointing and testing of underground XLPE insulated, armouredheavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 4 Core laid in trenches/ducts/along poles/through pipe under road etc with new aluminium lugs of cable size in replacement complete all as specified and directed.

Supply and laying galvanised steel tubing 50 mm bore light grade laid in trenches or fixed to poles/walls etc for cable protection complete all as specified and directed.

Materials and Labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground end vertically to a depth not less than 2.25 meter deep below ground level with top edge of the earth plate at a depth not less than 1.5 M below normal ground level connected to galvanized steel earth wire 4 mm dia by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1, cover slab 54 cm x 54 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm c/c both ways, and with one handle for lifting made out of 10 mm dia MS round bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing (light grade) for protection of earth lead connection, including necessary excavation and earth work in any type of soil and necessary testing complete all as shown on electrical plate No 3 of SSR Part –I (2009) and as directed.

M/s Pradeep Kumar

Ram Naresh Singh Sikarwar

M/s Anil Kumar

MOHAN LAL GUPTA

M/s RP AGRAWAL

M/S C S AITHANI

AASNA URZA INDIA PRIVATE LIMITED

VERDHMAN ASSOCIATES