REPAIR TO CERTAIN ROAD AND ALLIED SERVICES INCLUDING ROAD FURNITURE AT RAIWALA MIL STN UNDER AGE(I) RAIWALA

Amount

M&Lfor preparing existing black top surface by brushing with brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc all as directed.

M&L for applying evenly priming tack coat with paving Bitumen VG-10 grade over the prepared surfaces by mechanical sprayer @ 5 kgs/10 Sqm of surface area complete all as specified and directed.

M&L premix bituminous macadem laid, rolled and compacted to required gradient and camber consolidated thickness not exceeding 75 mm with 4% binder of paving Bitumen VG-30 grade, content by weight of total mix, mixed in hot mix plant and laid by mechanical paver finisher complete all as specified and directed.

M&L for applying bituminous premixed semi dense asphaltic concrete 30 mm thick (consolidated thickness) with 5.50% binder of paving Bitumen VG-30 grade, content by weight of total mix including cement filler, on surfaces, rolled compacted with using 8 to 10 tonne capacity power roller to achieve the required compactness, camber and gradient mixed in hot mix plant using design mix and laid by mechnaical paver finisher complete all as specified and directed. NOTE:-(i) The actual binder content used shall be as per optimised content based on approved job mix formula irrespective of what ever indicated in Sch 'A'. (ii) Price adjustment shall be done on MINUS side only @ Rs. 45,000/- per MT (without considering the permissible tolerance on minus side) with reference to binder content indicated in Sch 'A'. (iii) No Price adjustment for Bitumen shall be done for variation on plus side. (iv) Please note that SDAC to be laid immediately after laying of BM. In case the SDAC could not be laid within 48 hours of laying of BM, primer coat @ 3Kg / 10Sqm to applied over freshly prepared bituminous surface and nothing extra shall be paid by the Govt. on this account. No claim what so ever shall be entertained by Govt on this account.

M&L repairs to pot holes of depth exc 30mm and area n.ex 1.00 Sqm each incl sweeping free from dust and mud or water scoring sunken surfaces in roads , cutting around edges up to 25mm in depth , sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly priming tack coat with paving Bitumen VG-10 grade over the prepared surfaces by mechanical sprayer @ 5 kgs/10 Sqm, putting in premixed bituminous macadam wel,l rammed and sealed with binder 9.80 kg per 10 Sqm blended with 0.09 cum of stone chipping of 6.3mm size and again well rammed including supply of premixed macadam binder and chippings complete all as specified and directed.

S&F in repair dual directional 30 degree angle high intensity reflective Cat Eye double moulded of impact resistance ABS plastic stud 100mm x 100mm x 20-22mm with a shank of 50 mm with two reflectors made out of PMMA, plane base having ultra-violet resistant colour (white/red/yellow) having micro cube corner spark glow PC reflectoe white/ red/ yellow for fixing with epoxy or bitumen adhesive or fixed as per manufactures instructions all as complete all as specified and directed.

S&F in repairs Speed Bump speed breaker to bear maxinun load, made of PE plastic material with two highly reflective reflectors on either side, moulded in PMMA material, welded with ABS base plate of required size fixed with metallic bolts as per manufacturer direction of size and make as approved by AGE(I) complete all as specified and directed.

M&L for preparation of existing bituminous surfaces, removing, dust, dirt grease and other foregion matters etc to receive the markign and M&L for thermo plastic (Reflective paint) as in line, dashes, arrows, letters etc of size exc 100mm wide marking, having 2.5 mm thickness (average) of uniform surface finish conforming to BS 3262 (Part 1) 1989 read in conjunction with the MOST specification 803 clause 4.2.2 on bituminous surfaces in white/yelow clour and super imposed with glass beads confirming to BS 6088 read in conjuction with and MOST specification 803 clause 4.3.3 complete all as specified and directed:- Note: - MOST specification 803 shall be followed strictly for execution of work & suitable machine shall be used for the marking as approved by the AGE(I). Shape & size/ patterns of marking shall be as approved by the AGE(I).

PAWAN KUMAR (BID ID -3117639)

Malik Associates (BID ID -3122688)

OMVIN ENTERPRISES LLP (BID ID -3125351)

Appar Construction & Engineers (BID ID -3112411)

M/s RAM RATAN AND SONS (BID ID -3128110)