GE/KHU-85/2025-26 REPAIR/REPLACEMENT OF ROOF SHEETS, CEILING/WALL PANELLING/FLOORING, PLUMBING WORKS INCL CONNECTED ELECTRIC WORKS TO CERTAIN OTM ACCN AT KHALTSI, LAMAYURU AND ACHINATHANG IN THE AOR OF AGE BR-II KHALTSI UNDER GE KHUMBATHANG

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thick (below or above ground level) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing ), removing serviceable tiles to store and rubbish off the premises

M&L for 25 mm thick cement concrete type B-0 1:2:4 (12.5mm graded aggregate) as in floor or similar works complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (Square/ rectanglar) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc; set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L Vitrified ceramic tiles light shade 10mm thick (Square/rectanglar) area of each tile not exceeding 0.36 sqm in floors etc; set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nanital patterns roof covering. complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling wall and ceiling board of insulation boards/ slabs/ blankets any description and thickness in any posn incl cover fillets complete all as specified and directed.

M&L prelaminated particle board 9 mm thick interior grade, prelaminated one side with decorative lamination & other side balancing white lamination fixed with nails to timber frame work as in ceilings, complete all as specified and directed.

S&F prelaminated particle board 12 mm thick interior grade, prelaminated one side with decorative lamination & other side balancing white lamination fixed with nails to timber frame work as in wall, complete all as specified and directed.

Dismantling timber scantling under 40 Sqcm on flats, rails, posts, rafter, purlins etc.in unframed work complete all as specified and directed.

M&L for second class soft wood (Kail) plain fillets, rectanglar or triangular in section clean sawn secured with nails exceeding 13 Sq cm and not exceeding 25 Sq cm complete all as specified and directed.

M&L for I class softwood moulding as in cornices, rails etc Sectional area not exc 6 sqcm

M&L for 2nd class softwood exc 3 Sq cm not exc 6 sq cm sectional area bull nosed, splayed, chamfered or rounded on one edge or face fixed to ceiling/wall complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 15mm bore pipe complete all as specified and directed.

S&F 25mm outer dia 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc

S&F in repairs vitereous china wash hand basin, white, flat back of size 550 x 400 mm including brackets, cutting for pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F in repairs vitreous China Squatting pan 'Orrisa' pattern size 580x440mm white with integral foot rest, and jointing to PVC/CI bend and flush pipe complete including making good to floor complete all as specified & directed.

S&F in repair Vitreous China wash down pedestal pattern EWC, white water closet pan with intergral trap including seat cover ,making necessary connections to drain and to flushing pipe antisyphonage pipe etc, jointing to PVC/CI and flush pipe including making good to floor complete all as specified and directed.

S&F in repairs PVC flushing cistern dual type 10 Litres capacity incl all accessosaries complete all as specified and directed.

S&F in repair vitreous china urinals bowl ,flat back of size 465 x 355 x 265 mm with grating and union for discharge pipe, complete including providing and fixing plugs , bedding urinal against wall in cement mortar 1:2 , securing urinal to pluigs with and including 60 mm long brass screw , pointing around urinal back in cement incl provn of flush pipe, grating and union for discharge pipe, all as specified and directed.

S&F in repairs 15mm bore Bib Tap Chromium plated fancy type complete all as specified and directed.

S&F in repairs in 15mm bore Stop Valve (Angle Valve) chromium plated fancy type complete all as specified and directed.

S&F in repairs 15mm bore size pillar tap cast copper alloy chromium plated fancy type complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S & F in repairs rotational moulded polythene, two layers, water storage tank 500 Ltrs capacity, closed top, cylindrical, hoisted and fixed in position including minor repairing , for iron pipe including dismantling of old tank complete all as specified and directed .

S & F in repairs rotational moulded polythene, two layers, water storage tank 1000 Ltrs capacity, closed top, cylindrical, hoisted and fixed in position including minor repairing , for iron pipe including dismantling of old tank complete all as specified and directed .

S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

Taking down old unsv copper/aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden/iron, round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed.

M&L for point wiring for one light/fan/call bell point controlled by one 5 Amp switch with 1.5 Sqmm PVC (FRLS-H) insulated unsheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694-1990 and including one run of continous earth wire to common earth and connected to earth with 1.5 Sqmm PVC (FRLSH) insulated unsheathed multi stranded copper conductor cable draw in & incl PVC surface casing 'N' capping double lock type to be fixed with the help of rawal plugs & screws incl all fittings such as Tee, connector pieces, L-junction etc on joints including CI/MS/PVC sunk boxes for mounting switches, sockets, regulators etc with 3 mm thick plastic laminated sheet cover of adequate size for one light/fan/bell point controlled by one switch and making good disturbed surfaces with CM (1:4) to match with the existing surface complete all as specified and directed.. Notes : (a) Wiring shall be done by using proper colour coding.(b) Earth wire shall be of green colour. (c) On RCC roof/celing PVC casing 'N' cappingshall be provided on surface with proper fixing clamps all as directed by Engr-in-Charge.

Description all as per serial item No 35 here-in-before but one 5 pin socket outlet, 5 amps on the same board complete all as specified and directed.

Description all as per serial item No 35 here-in-before but one 5 pin socket outlet, 5 amps, independent complete all as specified and directed.

Description all as per serial item No 35 here-in-before but for one 5 pin socket outlet 15 Amps on Independent board with cables 2.5 sqmm size complete all as specified and directed.

S&F switch piano, flush type single pole one way 6 Amp, 240 volts ISI marked complete all as specified and as directed.

S&F socket outlet 2 in 1, 3 pin, 6 A ISI marked complete all as specified and directed.

S&F socket outlet 3 pin, 6/16 Amp, flush type, 240 Volts, 6 pin flush type complete ISI marked complete all as specified and directed.

S&F switch piano, flush type single pole, one way 16 Amps, 240 volts ISI marked complete all as specified and directed.

S&F ceiling rose, 3 terminal surface type complete all as specified and directed.

S&F angle lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply and Fixing LED bulb of 9 watt complete all as specified and directed.

Supply and fixing LED complete fitting including batten & T-8 Retro LED polycarbonate 1 x 20/18 Watt tuberod , appx 4 feet long, environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to tube fitting, complete fitting with all accessories and following specifications, complete all as spd.

M&L distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and directed.

M&L distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 4 way 240 volts double door complete all as specified and directed.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S &F of SPN 40 to 63 Amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Taking down carefully by unscrewing from boards/ outletboxes,fittingsandfixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store

Labour only for point wiring for one light/fan/call bell point controlled by one 5 Amp switch with 1.5 Sqmm PVC (FRLS-H) insulated unsheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694-1990 and including one run of continous earth wire to common earth and connected to earth with 1.5 Sqmm PVC (FRLSH) insulated unsheathed multi stranded copper conductor cable draw in & incl PVC surface casing 'N' capping double lock type to be fixed with the help of rawal plugs & screws incl all fittings such as Tee, connector pieces, L-junction etc on joints including CI/MS/PVC sunk boxes for mounting switches, sockets, regulators etc with 3 mm thick plastic laminated sheet cover of adequate size for one light/fan/bell point controlled by one switch and making good disturbed surfaces with CM (1:4) to match with the existing surface complete all as specified and directed.. Notes :(a) Items retrived from Srl item No. 19 shall be resued (b) Wiring shall be done by using proper colour coding.(c) Earth wire shall be of green colour. (d) On RCC roof/celing PVC casing 'N' cappingshall be provided on surface with proper fixing clamps all as directed by Engr-in-Charge.

Description all as per serial item No 52 here-in-before but one 3 pin socket outlet 5 Amps on the same board with other switces with cables 1.5 sqmm retrived from Srl item No. 19 above

Description all as per serial item No 52 here-in-before but one 3 pin socket outlet 5 Amps on the independent board with other switces with cables 1.5 sqmm retrived from Srl item No. 19 above

Description all as per serial item No 52 here-in-before but one 3 pin socket outlet 15 Amps on the independent board with other switces with cables 2.5 sqmm retrived from Srl item No. 19 above

Refixing only Switch 5 AmPs

Refixing only Socket outlet 5 Amp any type on independent board

Refixing only Socket outlet 5 Amp any type on same board

Refixing only Switch 15 Amps any type

Refixing only Sockel 15 Amps any type

Refixing only Tube light fitings any type

Refixing only Ceiling rose three terminal PVC/ Polycarbonate type with back plate sutable for batten fitting

Refixing only Lamp holder any type

Deduct Credit for Demolished/Dismantled material Rs (-) 71,045.00 (Minus) as listed in Schedule 'A' Part-II (Credit Schedule) Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'.

Please Enable Macros to View BoQ information