Loading
Loading…
Loading…
Tender Value
₹44.4 L
EMD Value
₹88,900
Closing Date
21 Mar 2025, 3:00 pmClosed
No
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Revenue
WORKS
13 conditions · 2 needing a document upload
Financial Standing: The Bidders will be qualified only if they have minimum financial capabilities as below - (i)T1- Annual Turnover: The bidder should have an aggregate financial turnover not less than 1.5 times the advertised Bid value during the last three previous financial years and in the current financial year upto the date of opening of the tender. The audited balance sheet reflecting financial turnover certified by chartered accountant with her stamp, signature and membership number shall be considered. (ii)T2-Liquidity: The bidder should have access to or has available liquid assets, lines of credit and other financial means to meet cash flow that is valued at 5% of the estimated bid value net of applicant's commitments for other contracts. The audited balance sheet and/or banking reference certified by chartered accountant with her stamp, signature and membership number shall be submitted by the bidder along with bid. (iii) Banking reference should contain in clear terms the amount that bank will be in a position to lend for this work to the applicant/member of the Joint Venture/Consortium. In case the Net Current Assets (as seen from the Balance Sheets) are negative, only the Banking references will be considered. Otherwise the aggregate of the Net Current Assets and submitted Banking references will be considered for working out the Liquidity. (iv)The banking reference should be from a Scheduled Bank in India and it should not be more than 3 months old as on date of submission of bids. (v) In Case of JV firms overall liquidity of JV firm shall be assessed by arithmetic sum of liquidity of all members of JV.
Technical Eligibility Criteria: (a) Work Experience: The bidder should have satisfactorily completed in the last three previous financial years and the current financial year up to the date of opening of the tender, one similar single service contract** for a minimum of 35% of advertised value of the bid. *Completed service contract includes on-going service contract subject to payment of bills amounting to at least 35% of the advertised value of the bid. ** Similar service contract means "Any retrofitment work of diesel loco/ electric loco/ coaches/ wagons in Diesel/Electric Sheds/Workshops/Production Units or C & W Depots"** Work experience certificate from private individual shall not be accepted. Certificate from public listed company/private company/Trusts having annual turnover of Rs 500 crore and above subject to the same being issued from their Head office by a person of the company duly enclosing his authorization by the Management for issuing such credentials. Notes: The bidder shall submit details of work executed by them in the prescribed format along with bid for the service contracts to be considered for qualification of work experience criteria clearly indicating the nature/scope of contract, actual completion cost and actual date of completion for such contract.
12 conditions · 4 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
For service contracts, MSE's registered with District Industries Centers, Khadi and Village Industries Commission, Khadi and Village Industries Board, Coir Board, National Small Industries Corporation, Directorate of Handicraft and Handloom, Any other body specified by Ministry of MSME, for the work tendered herewith shall be exempted from payment of minimum EMD and Cost of tender document. Documentary evidence/certificates in this regard should be uploaded for such exemption.
All documents being submitted by the Tenderer(s) alongwith their offer shall have to be self attested by the Tenderer
The earnest Money and tender documents cost in respect of e- tendering will be accepted through net banking on payment gate way only.
Fixed Deposit Receipt (FDR) will not be accepted as EMD for tender invited on IREPS (e-tender portal). (Authority Railway Boards Letter No. 2014/CE- 1/WP/5 of 01.09.16
Every tenderer shall state in the tender his postal address fully and clearly along with mail-id & mobile number. Any communication sent in time to the tenderer by post at the said address shall be deemed to have reached the tender duly and in time. Important documents shall be sent by Registered post.
Contractor has also to submit execution programme within 15 days of issue of Acceptance letter or at the time of signing CA whichever is earlier.
Any Conditional offer will be summarily rejected.
Modification in Air Brake system, Wiper Pipelines, and Associated systems with installation of required pipelines in WDG4/WDP4 locomotives of Diesel Loco Shed, Siliguri.
83-SGUD-Modification-2024
83-SGUD-Modification-2024
Open
Service - General
12 Months
Darjeeling, West Bengal
₹3,000
₹88,900
21 Mar 2025
27 Feb 2025
67 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 44,40,321.36 | ||
| — | 86.00 | — | — | ||
| Installation of FP Gauge with necessary 10 mm copper pipelines, fittings and Fabrication work (86 Locos) Single Gauge, self-illuminated at 10NDC, Reading Range (0-10 kg/cm2) | — | — | — | 2,04,396.2 | |
| — | 258.00 | — | — | ||
| Installation of FP Gauge with necessary 10 mm copper pipelines, fittings and Fabrication work (86 Locos) 4 inch Gauge base Holder 6" x6" of 2mm thickness MS Sheet | — | — | — | 45,150 | |
| — | 86.00 | — | — | ||
| Installation of FP Gauge with necessary 10 mm copper pipelines, fittings and Fabrication work (86 Locos) Wire for gauge light(l mm sq) | — | — | — | 6,450 | |
| — | 172.00 | — | — | ||
| Installation of FP Gauge with necessary 10 mm copper pipelines, fittings and Fabrication work (86 Locos) Flexible pipe for concealing wire | — | — | — | 21,500 | |
| — | 86.00 | — | — | ||
| Installation of FP Gauge with necessary 10 mm copper pipelines, fittings and Fabrication work (86 Locos) Gauge fittings [Gauge to copper pipes (1/2" Female to 3/8" male)] | — | — | — | 10,750 | |
| — | 860.00 | — | — | ||
| Installation of FP Gauge with necessary 10 mm copper pipelines, fittings and Fabrication work (86 Locos) Seamless copper pipe, 3/8" dia, wall thickess (t):- 0.9mm to 1.1mm | — | — | — | 4,12,800 | |
| — | 86.00 | — | — | ||
| Installation of FP Gauge with necessary 10 mm copper pipelines, fittings and Fabrication work (86 Locos) 3/8" fittings L-Elbows | — | — | — | 12,814 | |
| — | 172.00 | — | — | ||
| Installation of FP Gauge with necessary 10 mm copper pipelines, fittings and Fabrication work (86 Locos) 6 inch MS socket weld nipple of 12mm OD | — | — | — | 67,940 | |
| — | 86.00 | — | — | ||
| Installation of FP Gauge with necessary 10 mm copper pipelines, fittings and Fabrication work (86 Locos) Weld -0- Nut (1inch) inner threaded | — | — | — | 27,950 | |
| — | 86.00 | — | — | ||
| Installation of FP Gauge with necessary 10 mm copper pipelines, fittings and Fabrication work (86 Locos) 1 inch Male to ½ inch Male Reducer | — | — | — | 32,250 | |
| — | 86.00 | — | — | ||
| Installation of FP Gauge with necessary 10 mm copper pipelines, fittings and Fabrication work (86 Locos) 1/2" male to 3/8"Male Reducer | — | — | — | 30,530 | |
| — | 516.00 | — | — | ||
| Installation of FP Gauge with necessary 10 mm copper pipelines, fittings and Fabrication work (86 Locos) Clamps :-L= 6", W = 1.5", T = 2mm | — | — | — | 54,180 | |
| — | 258.00 | — | — | ||
| Installation of FP Gauge with necessary 10 mm copper pipelines, fittings and Fabrication work (86 Locos) 5/11*2 inch SS Hex Head Screws Bolts | — | — | — | 25,542 | |
| — | 516.00 | — | — | ||
| Installation of FP Gauge with necessary 10 mm copper pipelines, fittings and Fabrication work (86 Locos) Clamps :- L= 3", W= 20mm, T= 3mm | — | — | — | 33,540 | |
| — | 258.00 | — | — | ||
| Installation of FP Gauge with necessary 10 mm copper pipelines, fittings and Fabrication work (86 Locos) Nut & Bolts (L=8") | — | — | — | 10,836 | |
| — | 516.00 | — | — | ||
| Installation of FP Gauge with necessary 10 mm copper pipelines, fittings and Fabrication work (86 Locos) 19mm Nut for copper pipe fittings | — | — | — | 55,212 | |
| — | 86.00 | — | — | ||
| Installation of FP Gauge with necessary 10 mm copper pipelines, fittings and Fabrication work (86 Locos) 4" Grinding Wheel | — | — | — | 5,590 | |
| — | 258.00 | — | — | ||
| Installation of FP Gauge with necessary 10 mm copper pipelines, fittings and Fabrication work (86 Locos) 7" Grinding Wilter Blade | — | — | — | 24,768 | |
| — | 860.00 | — | — | ||
| Installation of FP Gauge with necessary 10 mm copper pipelines, fittings and Fabrication work (86 Locos) TATA Argico Welding Rod (3.15 mm) | — | — | — | 9,460 | |
| — | 688.00 | — | — | ||
| Installation of FP Gauge with necessary 10 mm copper pipelines, fittings and Fabrication work (86 Locos) Hose Assembly with lock | — | — | — | 68,800 | |
| — | 86.00 | — | — | ||
| Installation of FP Gauge with necessary 10 mm copper pipelines, fittings and Fabrication work (86 Locos) Painting of Gauge Base, Copper Pipe and Clamps | — | — | — | 86,000 | |
| — | 86.00 | — | — | ||
| Installation of FP Gauge with necessary 10 mm copper pipelines, fittings and Fabrication work (86 Locos) Labour Cost | — | — | — | 3,44,000 | |
| — | 2825.00 | — | — | ||
| Modification of Wiper pipelines, installation of 6 mm copper pipe and necessary fittings and required Fabrication Work (For 113 locos) Seamless copper pipe¼" or 6mm, wall thickness (t)- 0.9 mm | — | — | — | 7,06,250 | |
| — | 904.00 | — | — | ||
| Modification of Wiper pipelines, installation of 6 mm copper pipe and necessary fittings and required Fabrication Work (For 113 locos) ¼" Nipple elbows (From base to copper pipe) | — | — | — | 1,03,960 | |
| — | 1808.00 | — | — | ||
| Modification of Wiper pipelines, installation of 6 mm copper pipe and necessary fittings and required Fabrication Work (For 113 locos) 16 mm of nut for¼" copper pipe fittings | — | — | — | 1,84,416 | |
| — | 3390.00 | — | — | ||
| Modification of Wiper pipelines, installation of 6 mm copper pipe and necessary fittings and required Fabrication Work (For 113 locos) Clamps :- L= 3", W= 20mm, T= 3mm | — | — | — | 2,20,350 | |
| — | 1695.00 | — | — | ||
| Modification of Wiper pipelines, installation of 6 mm copper pipe and necessary fittings and required Fabrication Work (For 113 locos) 8 mm Hex Head Stainless Steel with Nut and Flat washer 10mm | — | — | — | 71,190 | |
| — | 113.00 | — | — | ||
| Modification of Wiper pipelines, installation of 6 mm copper pipe and necessary fittings and required Fabrication Work (For 113 locos) Painting of Copper Pipe and Clamps | — | — | — | 1,13,000 | |
| — | 113.00 | — | — | ||
| Modification of Wiper pipelines, installation of 6 mm copper pipe and necessary fittings and required Fabrication Work (For 113 locos) Labour Cost | — | — | — | 4,52,000 | |
| — | 624.00 | — | — | ||
| Front Cover Hinge Welding and painting Work (For 156 Locos) 4" x 4 mm, Heavy Duty Weldable MS Hinge | — | — | — | 56,160 | |
| — | 156.00 | — | — | ||
| Front Cover Hinge Welding and painting Work (For 156 Locos) Painting | — | — | — | 31,200 | |
| — | 156.00 | — | — | ||
| Front Cover Hinge Welding and painting Work (For 156 Locos) Labour Cost | — | — | — | 2,34,000 | |
| — | — | — | 6,77,337.16 | ||
| @ 18 % on Sub total | GST | amount | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ETenderNIT.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .