SPL REPAIR TO BLDG NO P16 P20 AT CHAUBATTIA UNDER GE RANIKHET

Amount

Dismantaling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based Plain sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as directed.

M & L for screed bed or bedding layer 15mm thick in cement mortar(1:6) for laying floor finishes complete all as specified and directed.

M & L for Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. pointed in white or coloured cement to match complete all as specified and as directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water etc.&removing rubbish to a disance not exc 250m

M&L for rendering 15 mm thick readymade plaster on inner/outer walls with Ultra Tech READIPLAST by adding 17-19% of potable water by weight of material. for thickness above 15mm, it is recommended to be applied in multiple layers. Ready mix plaster shall complies with IS 1661-1972, IS 2250-1965, IS 2402-1963 and confirms the Compressive strength @ 28 days- 10-12 Mpa/Bulk density-1500-1600 kg/cum. Note : The rate quoted by the contractor shall include cleaning of surface, application as per instruction and scaffolding upto 10 mtr height, all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting , and internal plastering complete all as specified and as directed.

M & L for glazed ceramic coloured / printed tiles 300mm x 600mm, 6 to 7mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/coloured cement to match the tiles, complete all as specified and as directed.

M & L for non skid ceramic coloured /printed tiles 7 to 8 mm thick (square / Rectangular)area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles.

Hacking out old broken glass ( any thickness ) size or description from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

S & F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S & F 3 mm thick Figured glass pin headed type, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S & F in Repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with Stainless steel wire staples.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc,) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.

S&F 2nd Class soft wood wall panelling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints ,chamfered both sidesfixed to existing frame with secret nailed as in wall panelling 15 mm including cornice and beeding as required and applying two coats of varnish over a fillet coat of thin varnish after preparation of the surfaces complete all as specified and directed.

S & F for powder coated 0.55 mm thick GI ceiling grid system fixed to walls with rawl plugs and screws and hang to roof members with 2 mm dia GI wire complete all as specified and directed:-

S & F 5 mm thick PVC seamless ceiling for insulation and accoustic purpose fixed on snap grid as in ceiling and complete all as specified and directed MAKE- Sintex/Rajshree or equivalent as approved by GE

S&F 15 mm thick seasoned 2nd class soft wood in ceiling, smooth and seamless fixing with support batons/fastners etc including beading , treated with anti termite & anti fungal treatment followed by 2 coats of polishing.

Dismantling of boarding , any description fixed in any position with screws complete all as specified and directed.

M&L 18/19 mm thick prelaminated particle board, interior graded, prelaminated one side with decorative choice laminated and other side balancing white lamination fixed with screws to timber frame work as in Shutter of Cupboards/Kitchen cupboard with teak beading of all sides fixed in repair complete all as specified and directed.

Supply and fix Continuous (piano) hinges width 30 mm mild steel , bright finish or eletrogalvanised complete all as specified

S & F 300 mm long (Length of bolt) mild steel sliding door bolts plate type stove enamelled blackwith bright bolt not less than 12mm dia with and including a minimum 6 bolts and nuts four on bolt plate and two on staple plate complete all specified and directed.

S & F floor door stopper of chromium plated body with rubber shoe fixed in door, overall length of cover plate 140 mm Complete all as spcified and directed

S&F in Repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F Cabinet Mirror plastic premium multipurpose wall mounted storage cabinet with mirror & shelfs prime look (white) of size 47 cm x 30 cm x 11 cm incl all fittings screws & washers, sample approved by Ge including taking down of old looking mirror any type as specified as directed.

Taking down wooden chowkhat or frame area not exc 1.5 sqm each with shutter (without taking off shutter from frame) as directed.

Taking down wooden chowkhat or frame area exc 1.5 sqm and not exc 4 Sqm each with shutter (without taking off shutter from frame) as directed.

S&F Factory made single extruded WPC (wood polymer Composite) solid door/ window/ Ceosetory window & other Frames/ Chowkhat of size 45 x 70 mm comprising of PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wwod powder/ rick husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded stat headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N / mm 2 and resistance to spread of flame of Class A catogory with property of being termite/ borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fast/lugs / SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

Factory made single extruded WPC (wood polymer Composite) solid plain flush door shutter of 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrwal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N mm2 modulus of elasticity 850 N / mm2 and resistance to spread of flame of Class A catogary with property of being termite/ borer proof, water/ moisture proof and fire retardanat and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-In-Charge (Note:- stainless steel butt hinges and necessary SS screws shall be paid separately.

S & F 1st class Hard Wood plain solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, And making good with existing surface as complete as specified and directed.

S & F 35 mm thick 1st class hard wood Glazed and skeleton door shutters, open rebated and prepared to receive gauze without sash bars, edges of framing plain fitted with cut and mitred beads for securing wire mesh or glass, size of members of shutter as specified in SSR Pt-I Sec-8 clause 8.24(a) fitted to chowkats, complete as specified and directed.

S & F 30 mm thick 1st class hard wood Glazed and skeleton window , ventilaors shutters, open rebated and prepared to receive gauze without sash bars, edges of framing plain fitted with cut and mitred beads for securing wire mesh or glass, size of members of shutter as specified in SSR Pt-I Sec-8 clause 8.24(b) fitted to chowkats, complete as specified and directed.

S & F 35 mm thick (batten thickness ) I st class hard wood, plain framed, panelled shutter (Any numbers of pannel) of with pannel of timber flat on both sides (feather edges) or 12 mm thick veneered particle board medium density wood particle board with commercial face veneers fitted to chowkhats complete as specified and directed.

M & L for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces.

M & L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint).

S & F 100 mm long brass barrel tower bolt, with cast or sheet barreland rolled or cast bolts and fixed tcomplete all as specified and directed. .

S & F 150 mm long brass barrel tower bolt, with cast or sheet barreland rolled or cast bolts and fixed tcomplete all as specified and directed. .

S & F butt hinges, medium weight, stainless steel and fixed, size of hinges 75mm complete all as specified and directed.

S & F butt hinges, medium weight, stainless steel and fixed, size of hinges 100mm complete all as specified and directed.

S & F 100mm long brass handle, cast type polished bright complete all as specified and directed.

S & F 150mm long brass handle, cast type polished bright complete all as specified and directed.

S&F Aluminium ( Extruded Section) body Door closer hydraulically regulated designation No. 2, universal type suitable for door shutters 701 to 850 mm in width and of wt. between 36 to 60 Kg , fixed in repair complete all as specified and directed.

M&L for brick work using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in CM (1:4)

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed

S&F GI water tubing of 15mm dia ,medium grade conforming to IS-1239(Part -1) including all fittings such as bends,tees,short pieces,connectors,elbows,reducers,union dockets etc & fixed to walls,ceilings, & laid on floors complete all as specified and directed.

S&F GI water tubing of 20 mm dia ,medium grade conforming to IS-1239(Part -1) including all fittings such as bends,tees,short pieces,connectors,elbows,reducers,union dockets etc & fixed to walls,ceilings, & laid on floors complete all as specified and directed.

Cutting chases, for water tubing or concealed , etc, and making good to facings where required and plastering in cement mortar (1:4) cutting not exceeding 10cm girth in brick walls complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes, 75mm to 110mm bore PVC (SWR) pipe jointed in cement mortar and taking out of trenches or any description/ fixed in wall and any position as required complete all as specified and directed.

S & F 110mm bore PVC (SWR) soil, waste & vent pipe single socketed in any length with runbber ring joints & fixed to walls or in floor complete all as specified and directed.

S & F 75 mm bore PVC (SWR) soil, waste & vent pipe single socketed in any length with runbber ring joints & fixed to walls or in floor complete all as specified and directed.

S & F 110mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F 110mm dia PVC cowls.

S & F PVC (SWR)branch Piece single ( Doble Y ) equal or unequal Dia 110mm complete all as specified and directed.

S & F PVC (SWR) multi floor trap 75mm with grating including jointing with solvant cement complete all as specified and directed.

S & F in repair Bib tap 15mm cast copper alloy, bright, crutch or butter fly handle screwed down, fancy type chromium plated for iron pipes complete all as specified and directed.

S & F in repair 15mm stop valve / angle valve, CP Fancy type screwed down high pressure with crutch or butter fly handle of fancy type chromium plated screwed both ends of, complete all as specified and directed.

S & F PVC connections 15mm dia , 450mm long, , with PTMT nuts & washers at both ends

S&F 15 mm Wall mixer with connector for Hand Shower Arrangement with connection Legs, Wall Flanges & Wall Brackets for hand shower ( MAKE- Jaquar code: FUS-CHR-29267 or equivalent) along with Hand shower 25x38 mm Oval Shape Single Flow (ABS Body & Face platechrome plated) with rubit cleaning system . MAKE- Jaquar code: HSH-CHR-49537 or equivalent) all as sepecified and ddirected

S&F 1000 ltr capacity rotational mounded polythylene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position including dismantling unserviceable PVC/Cement water storage tank 500/1000 complete all as specified and directed.

M&L for preparing newly plastered wall surfaces and applying two coat of distemper oil emulsion over a coat of primer(Priming the plastered and other surface preparatory to distempering) complete all as specified and directed.

S & F in repairs 20mm Dia Aluminium alloy anodised curtain rod decorative fency type with fixing brackets ,stops,rollers etc. complete all as specified.

S & F in repair, Single Piece-WC with PP soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings, Size:360x640x685 mm, P Trap-180 mm, Code : SLS-WHT-6851P180PP of Jaquar or equivlent in PRAYAG/CERA.

S & F in repair, Oval shape slim/Thin Rim ceramic wash basin size (19x13 inch)/Glossy finish/Counter top/Tabletop bathroom sink/Super white colour including fancy type pillar tap, all as specified and directed.

S & F in repair, Bathroom Towel Rack Shelves - Premium SUS304 Stainless Steel of size 19.69"L x 8.46"W x 6.22"H (50 x 21.5 x 15.8 cm) , Rustproof with Double Bar & 5 Hooks, wall mounted and rectangular in shape, complete all as specified.

S&F in repair Toilet Paper Holder of brass chromium plated or stainless steel fixed to walls with chromium plated brass screws.

S&F in repair, Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S & F in repairs 15 mm bore CP Mixer for mixing hot and cold water WHB Type screwed down for iron pipe. complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness.(below or above ground level) Complete all as specified and directed.

M & L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in plinth protection finishing the surface even and smooth without using extra cement Complete all as specified and directed.

S&F in repair Soap dish, any type Stainless steel , approximate size 160x 160x90mm fixed to plugs with chromium plated brass screws complete all as specified and directed. (Make : Jaquar/ Hindware )

S&F in repairs Gun Metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, 20mm bore complete all as directed.

Dismantling laid dry or laid dry and pointed Stone slabs and tiles of any description or thickness in floors, aprons etc.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

Dismantling structural steel work including doors, gates but excluding framed truss etc.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S&f Fe 410-W (Gde E- 250) quality A as in rolled mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.

Demolition of reinforced cement concrete of any description and in any position in beams shelves and similar works

M & L for RCC Type B1 1:2:4 (20mm graded aggregate) for Slabs supported on walls, beams and columns in Chajjascomplete all as specified and directed

M&L for Formwork to flat surfaces of chullah hoods, chajjas, troughs and similar items in cluding edges

M & L PCC 1:2:4 type B1 using 20mm graded stone agg as in precast cover slab for main holes, drains, channels etc set in cement mortar 1:4 including necessary from work all as specified and directed

S & F MS steel TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips, quality conforming to IS 1786-1985 complete all as specified and directed

S & F MS steel TMT bars over 5 mm and upto 10 mm dia as in stirrups and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips, quality conforming to IS 1786-1985 complete all as specified and directed

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P.brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F 10 mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required as directed by engineer in charge

S&F 18 mm thick UV coating , MDF board exterior grade ,both side laminated with any colour anti fungal , moisture resistant , anti borer as per IS 1458 for kitchen/cupboards/ partitions fixing with first class hardwood lipping/beadingetc complete all as specified and directed. Make- Action Tessa/Greenply/Century.

S&F Hardood ballies type 1, in repairs to replace old and decayed ballies, including piecing and scaring etc. old and new ballies, and removing old ballies to store.

M&L for 9mm thick plywood, graded BWR, type BB fixed with rawl plug and screws to timber framework complete all as specified and directed.

S&F for 8mm thick, wooden pieces, machine presured one side laminated and other side balancing green, as in parquet flooring with and including necessary padding as soft wool graded type as required at site, fixed with adhesive as per manufacturer's instructions including taking down old wooden flooring with or without plywood complete all as specified and directed.

Material & labour for preparation of old decorated plastered surfaces of walls including cornices etc by brooming down or steel wire brushing scraping down smoke soot moulds moss and efflorescent salt and trading oil and greasy spots and applying one coat of oil bound distemper complete all as specified and directed

Material & Labour for complete removal of existing treatment & applying a layer of JK/ Birla putty 1 mm thick (average) on wall surfaces in patches including cornics etc for proper levelling of plaster complete all as specified and directed.

M/L for preparing newly plastered wall surfaces and applying two coat of distemper oil emulsion over a coat of primer(Priming the plastered and other surface preparatory to distempering) complete all as specified and directed.

Material & Labour preparation of old painted brick/ concrete/ plastered surfaces of wall of any description over 10 cm girth or width, not otherwise described and applying two coat of synthetic enamel paint The contractor shall make necessary arrangement of scaffolding and ensure safety of Labours complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. The contractor shall make necessary arrangement of scaffolding and ensure safety of Labours complete all as specified and directed.

S & F for powder coated GI Everest ceiling grid system of grid size 600 X 600 mm fixed to walls with rawl plugs and screws and hang to roof members with 2 mm dia GI wire comprising of the Main Tee 28x24x3mm thick, Cross Tee 28x24x3mm thick and Wall angle 24x24x3mm thick sections complete all as specified and directed:-

S & F 4 mm thick Everest designer ceiling (E-board classic) board / tiles for insulation and accoustic purpose, 595 X 595 mm size fixed with staples on snap grid as in ceiling with and including dusting of surface and applying two coats of oil bond distemper over a coat of primer complete all as specified and directed

S&F Power Coated Anodised aluminium frame for doors, windows (three track system ), ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer?in-charge

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

M&L for Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high in Radium night glow Paint as specified and Dirtected.

M&L for modular kitchen having Steel Cabinet box and shutter including below mentioned item as per drawing attached. Boxes mentioned in drawing 1. Hinges soft close - Hettich 2. Drawers - Pans & Backers 3. Dishrack - Sleek 4. Cutlery - Hettich 5. Handless profile. - Hettich 6.Glass profile - Hettich 7.LEGS PVC 100mm- WUDNOX 8.Skirting 100mm - REHAU 9. Blind hinge - Hettich 10.Plate organiser - Hettich 11. Dustbin holder - Hettich 12. Detergent holder - Sleek 13. Antiskid Matt - Sleek 14. Galvenized - AM / NS steel 15. Glass - Black Glass 16.Stainless steel Sink 45" Two Bowl 17.WPC sheet 19mm below Granite included Shutter - PU finishes Matt and glossy (Size of boxes) Two pan Drawer 700 mm x 720 mm ,three pan Drawer 700mm x 720 mm,Cylinder Box 500mm x 720 mm Single shelf unit 950mm x 720mm,Sink unit 1200 mmx 720 mm ,Single shelf unit 850mm x 720 mm Two Pan drawer 850mm x 720 mm Top Boxes Single shelf unit 650mm x 720 mm,Single shelf unit 900 mm x 720 mm,Dishrack unit 900mm x 720 mm ,Ro unit 500 mm x 720 mm,Single shelf unit 650mm x 720 mm,Single shelf unit 450 mm x 720 mm,Single shelf unit 450 mm x 720 mm,Steel shutter unit 450 mm x 720 mm including all fixing material like screws,hydraulic hinges etc as per requirement of work also design,pattern and colour of modular kitchen will be approved by GE.Complete all as specified and directed by Engineer-in- Charge.

Demolition brick work or stone/ boulder masonery built in cement mortar including all quoins , pillars for ashlar facings,dressed stonework, precast concrete articles and precast concret block walling etc complete all as specified and directed.

Taking down shutters ( per leaf ) of any description not exc 1 Sqm each complete all as specified and directed.

Taking down shutters ( per leaf ) of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.

Refixing in the same opening shutter of any description not exc 1 Sqm each complete all as specified and directed.

Refixing in the same opening shutter of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.

M&L For 50 mm Thick Cement concrete type D-2 1:4:8 (using 40 mm graded stone aggegate ) as in sub base course complete all as specified and directed.

M&L for heavy duty tiles exterior grade 300 x 300 x 10mm including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match

M&L For Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment.

Excavation in trenches n exc 1.5m wide & n exc 1.5m in depth in hard/dense soil for foundation etc or for manholes, shafts etc n exc 10 sqm on plan and getting out complete all as specified and directed.

Demolition and breaking up drain pipes internal dia 150 mm (SWG, AC or RCC) set in cement mortar incl cement concrete bedding hunching etc and removing from site to a distance n exc 50m as directed all as specified and directed.

M & L for cement conc 1:4:8 type D2 using 40mm graded crushed stone agg bed to drain pipes including packing under and hunching against the sides of pipes after they are laid and tested 150mm bore pipe complete all as specified and directed

M & L for 150mm bore salt glazed stoneware drain pipes grade A laid in trenches and jointed in CM 1:1 with spun yarn complete all as specified and directed

M & L Returing , filling in including spreading , levelling watering and well ramming in layers not exc 25cm as in hard/dense soil complete all as specified.

M & L Removing excavated material exc. 250m but n' exc 500m and depositing where directed as in soil complete all as aspecified and directed.

Taking down exiting sign board of any description.

S & F 4 mm thick pre coated Aluminium composite panel cladding of approved colour and shape, joints filled with silicone sealant, fixed as per manufacturer's instruction complete all as specified and directed.

S & F stainless steel Backlit letters (304 Grade) of font "Arial" or any other font as approved by user in size 50cm x30cm and 25 mm thick made with 2 mm thick stainless steel sheet matt finish fixed on composite panel faced wall with approved stainless screws and bolts for the letters in English complete all as specified and directed.

M & L for preparation of old steel surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of Synthetic enamel paint complete all as specified and as directed.

M & L for preparation of old steel surfaces Plain or moulded n exc 10cm girth or width, when unconnected with other painting orwhen painted in a different tint and applying two coats of Synthetic enamel paint complete all as specified and as directed.

M&L PCC ( 1:2:4) type B-1 (using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work as required, complete all as specified and directed.

M & L for PCC ( 1:3:6) type B-1, using 20mm graded stone aggregate in Cement concrete in surface channels and drains

Extra for forming fair finished drain or channel 30 cm inner girth in cement complete all as specified and directed. concrete, using ex- tra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Taking down carefully Aluminium/copper wiring of any size (for light, fan, socket or power etc complete) ( fittings such as switches, sockets, ceiling roses, pendent holders regulators, tube lights etc to be measured and paid separately) and making good disturbed surfaces of wall, roof etc to match with existing surface complete all as specified and directed.

M & L point wiring for Modular fittings for one light point/ fan/ bell/ 5Amps socket out let (independent)point controlled by one, one way switch with 1.5 sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FR-LSH) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia )with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) incl modular metal flush box for mounting modular fittings and covered with modular cover plate with frame and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor cable earth wire and connected to earth dolly complete all as specified and directed One light/One fan/one bell point controlled by one modular switch of Module 1

One light point controlled by Two way modular switch.

One modular socket outlet 3 pin 6 amps controlled by one switch on same board of Module 3

One modular socket outlet 3 pin 6 amps controlled by one switch on independent board of Module 3

All as per item No 2 herein before but wiring with 2.5 sqmm copper wire (FR-LSH) PVC and 2.5 sqmm earth wire for modular socket outlet 5 pin 16 amps on independent board.

Supply and fix modular type switch single pole, one way 6 Amp complete all as specified and directed.

S&F modular switch, 2 way 6 Amp 1 module complete all as specified and directed.

Supply and fix socket out let multi 3 pin, 6 Amps, modular type complete all as specified and directed.

Supply and fix switch modular type single pole, one way 16 Amp complete all as specified and directed.

Supply and fix socket out let 2 in1,6 pin, 6 and 16 Amp, modular type complete all as specified and directed.

S&F ceiling rose, PVC/ Poly carbonate,isolated body three terminal complete all as specified and directed.

S & F lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed.

Supply and fix in replacement High quality LED T8 indoor batten tube light 20 Watt with aluminium extrusion in D shaped have large diameter for increased convection heat transfer incl one LED PC tube rod and driver, internaly pre wired of 1.5 sqmm twin twisted flexible cable all as specified & directed. NOTE: The contractor must submit 5 years warranty for LED fitiings.

Taking down unservicable MCB and S&F MCB SP, 240 volts,AC C curve, 10 KA 6 to 32 Amps complete all as specified and directed.

Taking down unservicable MCB and S&F MCB SPN , 240 volts,AC B curve, 10 KA 40 Amps complete all as specified and directed.

Taking down unservicable MCB and S&F MCB DP , 240 volts,AC C curve, 10 KA 40 Amps complete all as specified and directed.

Taking down unserviceable MCB S & F MCB TPN , 415 volts, AC C curve, 10 KA 100 Amps complete all as specified and directed.

S&F in replacement sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 240 Volts 20 Amps including one 15 Amp switch on existing board with wiring for switching geyser on/off complete all as specified and directed.

Supply & Fixing of non metallic PVC conduit 25 mm exclusive of boxes but includinf of all tees,bends,elbows, reducers,bell mouth tube ends and fixing accessories such as couplers,lock nuts,saddles, pipe hooks etc. concealed in wall ceiling floor etc for television/DTH/telephone/Data cable complete all as specified and directed.

S& F socket outlet for TV/Video/audio device modular type with inner and outer modular plate type, specially built for wall/high mounted TV and inc pressed steel/metal flush box concealed complete all as specified and directed.

Supply and fixing in replacement LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete. all as specified and directed .NOTE : The contractor must submit 5 years warranty for LED fittings

Taking down unservicable DB and S&F sheet metal enclusure for DBs(double door type) single pole and neutral 8 way including blanking platge as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

S&F in replacement sheet metal enclusure for DBs(double door type) Triple pole and neutral 4 way including blacking platge as required with 200 Amps rated bus bar, 415 volts fixed complete all as specified and directed .

S & F in replacement LED bulk head fitting, 1 x 10 watt with PDC aluminium housing and milky diffuser including LED light driver holder, complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230 Volts, 50 Hz complete all as specified and directed. NOTE: The contractor must submit 5 years warranty for LED fittings

Taking out old U/S Sub main wiring for replacement including S&F sub main wiring with two single core FR-LSH PVC insulated and sheathed 1100 Volts grade, 10 Sqmm size cables, PVC insulated stranded copper conductor fixed in PVC conduite pipe 25mm dia with all accessories and one continuous run of 10.0 Sqmm copper conductor PVC complete all as specified and directed (Note :- Two single core cables along with earth wire and conduit shall be measured as one unit length).

M&L for earthing complete with galvanised steel, earth plate electrode 600x600mm x 6mm thick burried directly in ground verticaly (earth pit not less than 2.25 mtrs below ground level ) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electrical plate No 3 on page 497 of MES schedule 2009 part - I connected to main switch board/main DBs/earthing test point including all necessary excavation and earth work in hard/dense soil common salt and charcoal dust mixed and packed 150mm thick all round the GI earth plate, watering pipe 20mm dia GI medium grade. GI sheet 0.63 mm thick funnel, wire gauge, 50mm thick RCC cover in PCC 1:2:4 type B1 duly reinforced with MS round bars 6mm dia @ 150c/c both ways and pit/chamber in PCC 1:3:6 type C1 with suitable lifting handle to cover, GI protection pipe 15mm dia light grade up to 7.5mtr from electrode GI pipe to be fixed with complete all as specified and directed. Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 15mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost.

S & F in replacement call bell ding dong AC, 230V single pole fixed over with and including sunk spressed steel box of size 175mmx100mm with 3mm thick plastic laminated backalite shut cover fixed with brass screw complete all as specified and directed,

S&F modular bell push, 6 Amp 1 module complete all as specified and directed.

S& F LED Bulb of 9 watt as specified .NOTE: The contractor must submit 5 years warranty for LED fittings

Supply and fix in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with two core flexible copper conductor cable of suitable size complete all as specified and directed. NOTE: The contractor must submit 5 years warranty for LED fittings

Taking down storage type water heater (geyser) of any type /make up to 50 Ltr capacity after disconnecting electric / water connections and refixing the same after carrying out necessary repairs including reconnecting the electric / water connections and testing complete all as specified and diected.

S & F in replacement Exhaust fan plastic body heavy duty ISI mark, 250 mm size with louvers including all connecting accessories and cutting opening on wall and making good as per existing surface complete all as specified and directed

S&F in replacement Exhaust fan metallic bady ISI mark, 300 mm size with louvers including cutting openings, through brick/ stone wall , making of holes and grouting of suitable size of nuts and bolts for 300 mm exhaust fan and making good dismantled portion and making connection with wire of suitable size and connecting accesssories complete all as specified and directed.

S&F in replacement LED luminaire wall bracket type, made in fully cast aluminium body finished with polyurethane paint with nipple having B22 holder incl 05/6 watt LED bulb of Make Mepro Cat part No: AL-135 or equivalent make in Bajaj/Havells complete all as specified and directed. NOTE: The contractor must submit 5 years warranty for LED fitiings.

S&F in replacement recess mounted LED downlighter aluminium heat sink type, 9 watt with PC diffuser in white powder coated finish with integrated driver of Make Havells/Bajaj/Philips complete all as specified and directed. NOTE: The contractor must submit 5 years warranty for LED fitiings.

S & F in replacement Recess mounting LED luminaire 600mm x 600 mm ,36 W, 220v, with high efficiency PMMA diffuser soft glare free light suitable for recessed mounting ,with powder coated CRCA housing with LEDs, seamless front frame complete with driver and all accessories internally pre-wired and including necessary cutting as required in panel and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make : Bajaj/Havells/ Philips NOTE: The contractor must submit 5 years warranty for LED fitiings.

S&F in replacement bed side LED light fitting , 6 watt, with independent switch & G-22 holder and LED lamp complete all as specified and directed.

S & F in replacement surface mounting LED luminaire 600mm x 600 mm ,36 W, 220v, with high efficiency PMMA diffuser soft glare free light suitable for surface mounting ,with powder coated CRCA housing with LEDs, seamless front frame complete with driver and all accessories internally pre-wired and including necessary cutting as required in panel and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make : Bajaj/Havells/Philips NOTE: The contractor must submit 5 years warranty for LED fitiings.

Builders Harpal (BID ID -3507048)

NK CONSTRUCTION (BID ID -3499767)

aditya construction (BID ID -3506393)