WATER LIFTING CHAMBERS

Cutting open B.T. road surface (as well as asphalt concrete up to 75 mm thick) including water bound macadam

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and 2 other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD/304 MORTH

Collection, supply and filling of Stone crusher dust finer than 3mm with not more than 10% passing 0.075 sieve including cost and conveyance of all materials, labour charges, watering and compacting etc., complete as per ss under bed concrete

Providing concrete for plain cement concrete (M10) in open foundations using 20 mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH for bed concrete

Brick Masonry in CM (1:6) with 2nd class Bricks traditional size 23 x 11 x 7 cms including cost of all materials and labour charges for curing and scaffolding charges etc., complete

Plasteing with CM (1:3), 12 mm thick including Cost & Conveyance of all materials and labour charges for mixing and curing etc., Complete as per S.S.

Manufacture, Supply, & Delivery of HDPE pipes conforming to IS 4984-2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight Length) as per SOR 2024-25 110mm HDPE 6kg/sqem MAT- 1 07265

Laying and jointing of HDPE pipes by butt fusion welding as per IS: II/7634 as amended from time to time to the alignment and gradient and testing the pipeling to the required pressure. (PE-100 Grade) OD 110 mm 6.0 kg/sqcm

Supply and Transportation of 5HP Three phase ISI self priming Mono block IP44 motor pumpset Makes: As per list of recommended brands as category I. 5.00HP(80x80mm) MAT-03707

Supply of 3 Core 4 Sqmm Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990. Makes: V-Guard/Gold Medal/GM/Million/Vimal/ Finecab/Orbit/ CRI/Tamra/Airson/Ollvin/Avocab/ Anchor ELEC-1.6.3 as per SOR 2024-25 MAT-02796

Fabrication, transportation and and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated, painted with two coats of Red oxide primer and two coats of Grey paint, lock and 11 key arrangements two side louvres with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T /Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Makes: As per list of recommended brands. Voltmeter; 0-500 V 96x96mm size. 10 to 20 Amps/050 Amps Ammeter (96x96mm size)-1No. Single phase preventor of suitable range - INo. 32 A TP, 10KA MCB. - INo Indication lamps (R-Y-B) with switch control - 1set Voltmeter & Ammeter selector switch - 2 Nos Supply and fixing of ISI Mark suitable capacitor Upto 7.5 HP with DOL Starter of MAT-03713

Manufacture, supply, delivery and fixing of Window grills, Compound wall grills, Iron Doors, Windows made with MS flats etc including welding, finishing, applying red oxide paint as primary coat etc complete unit 1.00 kgs