Balance work for the construction of 4 Nos. Type-II Quarters for the staff of Assistant District Attorney at Dehra District Kangra HP

Amount

Excavation in foundation trenches etcetra in earth work in all kinds of classification of soil such as pick work, jumper work, pick jumper work, blasting work, soft and hard blasting and doing work in saturated soil, including chiseling or wedging out rock where blasting is prohibited, or any other mixed variety of soil including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depth or any quantum of water including slush which may arise during dewatering, removal of slush and stacking the excavated soil clear from the edge of excavation with in all leads, as directed by Engineer-in-Charge and then returning the stacked soil in 15cm (fifteen centimeters) layers when required into plinths, sides of foundations etcetra. consolidating each deposited layer by ramming watering and then disposing of all surplus excavated earth as directed by Engineer-in-Charge with in all leads and lifts, disposed earth to be levelled and neatly dressed including carriage of materials within all leads and lifts.The rate including, Octroi, Toll Tax Sales tax ,GST or any other taxes imposed by the Government.

Filling in plinth with sand under floors including watering, ramming consolidating and dressing complete as per HPPWD specification or as directed by Engineer-in-Charge, including carriage of materials with in all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters)thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Columns, pillars, posts and struts, (square, rectangular or polygonal in plan), up to all floor level or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters)thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers, girders and lintels, sides and soffits of beams, beam haunchings, cantilevers girders, bressumers and lintels upto any depth/heights, up to all floor level or as directed by the Engineer-in-Charge including carriage materials of within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings, shelves, and the like floor, etcetra up to any thickness, up to all floor level or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Vertical surfaces such as walls (any thickness) partition and the like including attached pillasters, buttresses, plinth and string courses and the like, up to all floor level, complete as per HPPWD specification or as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including, Octroi, Toll Tax Sales tax ,GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing, up to all floor level or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls upto any width, up to all floor level or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:6:12 (one cement isto six sand isto twelve graded crushed stone aggregate 40mm (forty millimeter) nominal size) and curing complete, excluding the cost of form work in foundation and plinth/under floors in all depths/heights including pumping or bailing out water/dewatering and removal of slush which may arise at the time of laying under water complete as per HPPWD specifications or as directed by the Engineer-in-Charge and carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:5:10 (one cement isto five sand isto ten graded crushed stone aggregate 40mm (forty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental.The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone aggregate 40mm (forty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, royality, octroi, toll tax or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work Grade M-20 (M-Twenty) mix design to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square millimetre) with cement contents not less than 320kg (three hundred twenty killogramme) per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts in all depths/thickness and upto all floor level or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete, grade M-20 (M-twenty) mix design, to obtain the minimum compressive strength of 20N/mm² (Twenty newton per square millimetre) with cement contents not less than 320Kg (three hundred twenty kilogrammes) per cubic meter including curing complete, excluding the cost of form work and reinforcement for reinforced cement concrete work in walls (any thickness) but not less than 0.10mtr (zero point one zero metre) thickness including attached pilasters, buttresses, plinth and string courses etcetera and the like from top of foundation up to all floor level, and curing complete as per HPPWD specification and as directed by Engineer-in Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work Grade M-20 (Twenty) mix design to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square millimetre) with cement contents not less than 320 Kg (three hundred twenty killogramme) per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports, balconies, beams, girders, bressumers cantilevers etcetera in all depths/thickness upto all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work Grade M-20 (M-Twenty) mix design to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square millimetre) with cement contents not less than 320kg (three hundred twenty killogramme) per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in stair cases (except spiral stair cases) excluding landing but including preparing of top surface and finishing of nosing up to all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work Grade M-20 (Twenty) mix design to obtain the minimum comppressive strength of 20 N/mm² (twenty newton per square millimeter) with minimum cement contents of 320kg (three hundred twenty Killogramme) per cubic meter in reinforced concrete Chajjas of any thickness and upto all floor level, including finishing the exposed surfaces with cement mortar 1:3 (one cement isto three sand) to give a smooth and even surface, including centering/form work and curing complete, excluding the cost of reinforcement complete, as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and laying mild/Tor steel reinforcement for Reinforced Cement Concrete work including bending, binding, straightening and placing in position complete including cost of binding wire and other incidentals due for its completion up to all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental.The rate including Royality, Malkhana, Octroi, Toll Tax ,Sales tax,GST or any other taxes imposed by the Government.

Providing and laying damp proof course 38mm (Thirty eight millimeters) thick with cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 12.5mm (twelve decimal five millimeter) nominal size) and curing complete including cost of form work as required at site or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental.The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Applying a coat of hot bitumen (mexphalt 80/100 (eighty/hundred) or equivalent) using 1.70 Kgs. (one decimal seven zero kilogramms) per square meter on damp proof course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil complete including carriage of materials within all leads, lifts and other incidental and as per the direction of Engineer-in-Charge. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Brick work using Second class common burnt clay buildings bricks in super-structure above plinth level upto all floor level in cement mortar 1:6 (one cement isto six sand) and curing complete including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate including Royality, Malkhana, Octroi, Toll Tax GST,Sales tax or any other taxes imposed by the Government.

Half brick work using second class common burnt clay building bricks in super structure above plinth level upto all heights/floor level in cement mortar 1:4 (one cement isto four sand) shall be provided with hoop iron and curing complete including carriage of materials within all leads, lifts and other incidental, or as directed by the Engineer-in-Charge. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth upto all heights/depths including pumping or bailing out water/ dewatering including racking out joints in cement mortar 1:6 (one cement isto six sand) complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing ISI marked, 12mm (twelve millimeter) thick pre laminated board both side bwp phenol bonded of Kitply/Action Tesa/Century or its equivalent exterior/interior grade panelled shutters with 40mm (forty millimeter) thick frame of first class Deodar Wood for Doors including bright finished/ black enamelled iron butt hinges with necessary screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 40mm (forty millimeter) thick second class Deodar Wood wire gauze shutters using galvanized MS wire gauze of IS gauge designation 85-G (eighty five-G) with wire of dia 0.56mm (zero point five six millimeters) for doors, windows and clearstory windows including bright finished black enamelled iron butt hinges, with necessary screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen millimeter) thick water proof and anti termite commercial board ISI marked make of century ply or its equivalent shutters for cup boards, with 6mm (six millimnetre) thick hard wood edging all round including fixing with nickel plated piano hinges and screws etcetera complete as per HPPWD specifications or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax ,sale tax,GST or any taxes imposed by the Government

Providing and fixing 19mm (nineteen millimeter) thick water proof anti termite commercial board ISI marked make of century ply or its equivalent in shelves/ box for cup board with butt joints and fixing with nails and screws etcetera complete as per drawing and design as per HPPWD specifications or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 6mm (Six millimeter) thick ply wood lining with butt jointing and nails (frame work and cover fillets to be measured and paid for separately) complete as per HPPWD specification or as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen millimeter) thick water proof anti termite commercial board ISI marked make of century ply or its equivalent shutter for S.D.B including fixing with nickel plated piano hinges and screws etcetera complete including 6mm (Six millimeter) thick hard wood edging/lipping and PGI sheet lining in side complete as per HPPWD specifications or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 8mm (eight millimeter) thick ISI marked cement bonded particle board ceiling of approved make on angle iron/T-section frame with butt jointing and nail complete (frame work and cover fillets to be measured and paid for separately) as per HPPWD specification or as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 12mm (Twelve millimeters) thick and 150mm (one hundred fifty millimeters) wide pelmet with 25mm (twenty five millimeters) diametre aluminium curtain rods and brackets including fixing with 25x3mm (twenty five into three millimeters) M.S. flat 10cm (ten centimeters) long and plugs and necessary screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax ,Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing plain M.S. grills of required patterns in wooden/steel frames of window etcetra with M.S. flat, square or round bars, bolts and nuts or screws including welding with frame complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 300x16mm (three hundred into sixteen millimetre ) aluminium sliding door bolts, make of PILOT/Sheel or equivalent anodized transparent or dyed to required colour and shade with necessary bolts, nuts and screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 250x16mm (two hundred fifty into sixteen millimeters) aluminium sliding door bolts, make of PILOT/Sheel or equivalent, anodized transparent or dyed to required colour and shade with necessary bolts, nuts and screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 300x10mm (three hundred into ten millimeters) aluminium tower bolts (Barrel type) make of pilot/sheel anodized transparent or dyed to required colour and shade with screws etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 250x10mm (two hundred fifty into ten millimeter) aluminium tower bolts (Barrel type) make of pilot/sheel or equivalent anodized transparent or dyed to required colour and shade with screws etcetra complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 125mm (one hundred twenty five millimeters) aluminium handles make of pilot/sheel or equivalent anodized transparent or dyed to required colour and shade with necessary screws etcetra complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeters) aluminium handles make of pilot/sheel or equivalent anodized transparent or dyed to required colour and shade with necessary screws etcetra. complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeters) M.S. (mild steel) single acting spring hinges with necessary screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 200mm (two hundred millimeters) size oxidized mild steel hooks and eyes complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and laying upto all floor level 20mm (twenty millimeter) thick hydraulically compressed and polished precast terrazzo tiles of 300x300mm (three hundred into three hundred millimeter) size of NTC or its equivalent ISI marked No.IS 1237 with marble chips of white, green, yellow and maroon shade of size O,B, 2B sizes laid in floors, treads of steps and landing on a bed of 25mm (twenty five millimetre) average thickness of cement mortar 1:6 (one cement isto six sand) and jointed with white/grey cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing complete with the tiles of silver grey shade upto all floor level complete as per HPPWD specifications or as per direction by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

40mm (Forty millimeters) thick cement concrete flooring 1:2:4 (one cement is to two sand is to four graded crushed stone aggregate 20mm (twenty millimeters) nominal size) laid in one layer finished with a floating coat of neat cement and curing complete up to all floor level as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads and lifts. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and laying upto all floor level 20mm (twenty millimeter) thick hydraulically compressed and polished precast terrazzo tiles of 300x300mm (three hundred into three hundred millimeter) size of NTC or its equivalent ISI marked No. 1S-1237 with marble chips of white, green, yellow and maroon shade of size O,B,2B sizes in skirting risers of steps and dodo upto any height on 10mm (Ten millimeter) thick cement plaster 1:3 (one cement: three sand) jointed with white/grey cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete with tiles of silver grey shade complete as per HPPWD specifications and as per direction by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and laying upto all floor level White glazed tiles of size 300x450mm (three hundred into four hundred fifty millimeters) and 6mm (six millimeters) thick of approved brand and make (Kajaria/Swastik/Somany tiles or equivalent) in skirting, risers of steps and dado for all heights on12mm (twelve millimeters) thick cement plaster 1:3 (one cement is to three sand) and jointed with white cement slurry complete as per HPPWD specification and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster in skirting or dado upto all heights with cement mortar 1:3 (one cement isto three sand) finished with floating coat of neat cement including rounding of junction with floors and curing complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials with in all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 40mm (forty millimeter) wide and 4mm (four millimeters) thick glass strips in joints of terrazzo/cement concrete floors complete as per HPPWD specifications or as directed by the Engineer-in-Charge, up to all floor level, including carriage of materials within all leads, lifts, and other incidental.The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and laying 20mm (twenty millimeters) thick white makrana marble work (table rubbed and polished) in floring laid over 20mm (twenty millimeters) thick base in cement mortar 1:3 (one cement is to three sand) including jointing with cement mortar 1:2 (one cement is to two marble dust) with an admixture of pigment to match the shade of marble complete upto all floor level, as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 0.60 (zero point six zero millimetre) thick ISI marked Z-120 (Z-one hundred twenty) prepainted steel sheet of TATA/Shakti or equivalant in roofing over steel trusses with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) Organic coating of 20 (TWENTY) microns over 5 (five) microns of primer coating to back coat of polyster of 5 (five) microns over 5 (five) primer coating including fixing with prepainted iron J or L hoks, bolts and nuts 6mm (six millimeter) diameter with prepainted limpet and rubber washer filled with required colour and laid completely with all accessories as required as per direction of Engineer-In-charge including carriage of materials with in all leads and lifts and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing ridges or hips 60cm (Sixty centimetre) over all with 0.60mm (zero point six zero millimetre) thick prepainted steel sheet of TATA/Shakti or equivalant in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (five) microns primer coating plus back coat of polyster of 5 (five) microns over 5 (five) microns one primer coating including fixing with prepainted iron J or L hooks and bolts and nuts 6mm (six millimeter) diameter and prepainted GI limpet and bitumen washer complete with all accesseries as required as per direction of Engineer-In-charge including carriage of materials with in all leads and lifts and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing valley 60cm (Sixty centimetre) over all with 0.60 (zero point six zero millimetre) thick prepainted steel sheet of TATA/Shakti or equivalant in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating plus back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimeter) diametre with prepainted G.I limpet and bitumen washer complete with all accessories as required as per direction of Engineer-In-charge including carriage of materials with in all leads and lifts and other incidental as per the direction of Engineer-in-Charge. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 0.63 mm (zero point six three millimeter) thick plain galvanized iron sheet 15cm (Fifteen centimeter) wide 45cm (forty centimeter) overall semicircular plain G.I sheet U-shape gutter with iron brackets 40x3mm (forty into three millimeter) size bolts and nuts and washers etcetera including making necessary connections with rain water pipe as per design and drawing upto all floor level, complete as per HPPWD specifications or as per direction by the Engineer-in-Charge, including carriage of materials within all leads, lifts, and other incidental.The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing on wall face 150mm (one hundred fifty millimeter) diameter P.V.C (polyvinyl chloride) (D-Plast) or its equivalent pipe confirming to IS code No.-13592 for rain water pipe of working pressure not less than 4.5kg (four point five kilogramme) per square meter including filling the joints with adhesive of approved make complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental.The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing on wall faces PVC (D-Plast) or its equivalent accessories confirming to IS code No.-14735 for rain water pipes including filling the joints with approved adhesives complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government. . P.V.C Plain bend 150mm (one hundred fifty millimeter) nominal diameter.

Providing and fixing on wall faces PVC (D-Plast) or its equivalent accessories confirming to IS code No.-14735 for rain water pipes including filling the joints with approved adhesives complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government. . PVC plain shoes 150mm (one hundred fifty millimeters) diameter.

Providing and fixing M.S. black plain iron sheet 1.66mm to 2.00mm (one point six six millimeter to two point zero zero millimeters) thick in facia/eaves boards/soffits /ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per HPPWD specifications or as direction by the Engineer-in-Charge, (base members of steel work shall be measured and paid for separately), including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing wind ties of flat iron section 40x6mm (Forty into six millimeters) complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax, Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 150 mm (one hundred fifty millimeter) diameter, mild steel Holder Bat clamps of approved design to CI or SCI/P.V.C pipes embedded in and including cement concrete blocks 10x10x10cm (ten into ten into ten centimeter) of 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (Twenty millimeter) nominal size) mix including cost of cutting holes and making good the walls complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental.The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing angle iron doors frames (Single rebate) manufactured from M.S. angle iron section of 40x40x5mm (forty into forty into five millimeters) thickness and M.S flat 50x5mm (Fifty into five millimeter) in combination welded together to make one frame as per design and drawing including hinges, jamb, lock jamb, beed and if required angles thrashold of mild steel angle 50x25mm (fifty into twenty five millimeter) welded or rigidly fixed by mechanically means, lugs with split end tails to each jamb including steel butt hinges 2.5mm (two point five millimeters) thick with a provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pretreatment of the surface complete as per HPPWD Specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing angle iron doors frames (double rebate) manufactured from M.S. angle iron section of 40x40x5mm (forty into forty into five millimeters) thickness and M.S flat 50x5mm (Fifty into five millimeter) and M.S flat 25x5mm (Twenty five into five millimeter) in combination welded together to make one frame as per design and drawing including hinges, jamb, lock jamb, beed and if required angles thrashold of mild steel angle 50x25mm (fifty into twenty five millimeter) welded or rigidly fixed by mechanically means, lugs with split end tails to each jamb including steel butt hinges 2.5mm (two point five millimeters) thick with a provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pretreatment of the surface complete as per HPPWD Specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing doors windows and ventilators frames manufactured from MS channel section ISLC-75 (seventy five) mild steel channel section 75x40x4mm (seventy five into forty into four millimeters) flapped with mild steel flat 75x4mm (seventy five into four millimeter) in combination welded together to make one frame as per design and drawing including hinges- jambs, lock jamb , beed and if required angle thrashold of mild steel angle 50mmx25mm ( fifty millimeter into twenty five millimeters) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel butt hinges 2.5mm (two decimal five millimeters) thick with a provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-Charge including carriage of materials within all leads , lifts and other incidental.The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing steel glazed doors, windows and ventilators of various type categorized below, fabricated of standard rolled steel sections joints, mitred, and welded with 16x3.15mm ( sixteen into three decimal one five millimeters) lugs 10cm (ten centimeters) long embedded in cement concrete block 15x10x10cm (fifteen into ten into ten centimeters) size of 1:3:6 (one cement isto three sand isto six graded stone aggregate 20mm (twenty millimeter) nominal size) or with wooden/ steel plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fitting such as handles, tower bolts etcetra including providing and fixing of glass panes 4mm (four millimeter) thick with glazing clips and special metal sash putty of approved make complete including applying priming coat of red lead paints or as directed by Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.(Fixed steel windows).

Providing and fixing steel glazed doors, windows and ventilators of various type categorized below, fabricated of standard rolled steel sections joints, mitred, and welded with 16x3.15mm ( sixteen into three decimal one five millimeters) lugs 10cm (ten centimeters) long embedded in cement concrete block 15x10x10cm (fifteen into ten into ten centimeters) size of 1:3:6 (one cement isto three sand isto six graded stone aggregate 20mm (twenty millimeter) nominal size or with wooden/ steel plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fitting such as handles, tower bolts etcetra including providing and fixing of glass panes 4mm (four millimeter) thick with glazing clips and special metal sash putty of approved make complete including applying priming coat of red lead paints and carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality Octroi, toll tax ,sale tax, GST or any taxes imposed by the Government..(Top hung ventilator).

Providing and fixing M.S. fan clamps type-1 of 16mm (sixteen millimeters) diameter M.S. bars bent to shape with hooked ends in RCC reinforcement cement concrete slab during laying including painting the exposed portion of loop, all as per standard design complete upto all floor level as per HPPWD Specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality Octroi, toll tax ,sale tax, GST or any taxes imposed by the Government.

Providing and fixing angle iron SDB/Cup board frame manufactured from M.S. angle iron section 25mmx25mmx 5mm ( twenty five millimeter into twenty five millimeter into five millimeters) thickness including hinges- jambs, lock jamb , beed and if required angle thrashold of mild steel angle 25mm x 25mm( twenty five millimeter into twenty five millimeters) welded or rigidly fixed by mechanical means, lugs with split ends tails to each jamb including steel butt hinges 2.5mm ( two decimal five millimeters) thick with a provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-Charge including carriage of materials within all leads , lifts and other incidental.The rate including Royality Malkhana Octroi, toll tax ,sale tax, GST or any taxes imposed by the Government.

Providing and fixing factory made double steel shutters window side hung (one glazed and other wire gauged ) including frame of channel ISLC-75 (Seventy five) flapped with MS flat 75x4mm(Seventy five into four millimeter) and 50x4mm (fifty into four millimeter) with opening side of channel to make multi frame and shutter of rolled steel Z-section, T-section and T-hinges, handles with closing device and making provision of fixing of windows where required with 16x3.15mm (sixteen into three point one five millimeter) lugs 10cm (ten centimeter) long, embedded in cement concrete blocks 15x10x10cm (fifteen into ten into ten centimeter) of cement concrete 1:3:6 (one cement isto three sand isto six graded crushed stone aggregate 20mm (Twenty millimeter) nominal size or with wooden/steel plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fittings, including providing and fixing of handles and hasps and staples etcetera and fixing 4mm (four millimeter) thick glass panes with glazing clips and special metal sash putty of approved make for glazed side of shutter and wire gauge of IS gauge designation 85-G (eighty five –G) with wire of 0.56mm (zero point five six millimeter) and for fixing wire mesh with M.S flat 20x3mm (Twenty into three millimeter) for metal beading complete for wire gauge shutter including applying a priming coat of red lead paint as per drawing and design or as per the direction of Engineer-in-Charge Including carriage of materials with in all leads and lifts. The rate including of Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Steel work welded in built up sections trusses and framed work, composed of beams, joists, channels, angles, tees, flats and connecting plates or angle cleats etc. as in trusses and trussed purlins, main and cross beams, hip and jack rafters, purlins connected to common rafters and the like in building including cutting, fixing, lifting, hoisting and placing in position complete and applying a priming coat of red lead paint complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Toll Tax, Sales tax Octroi toll tax,GST or any other taxes imposed by the Government. In beams, joists, channels, angles, tee, flats with connecting plates or angle cleats as in main and cross beams, hip and jack rafters, pulins, connected to common rafters and the like.

Steel work welded in built up sections trusses and framed work, composed of beams, joists, channels, angles, tees, flats and connecting plates or angle cleats etcetra. as in trusses and trussed purlins, main and cross beams, hip and jack rafters, purlins connected to common rafters and the like in building including cutting, fixing, lifting, hoisting and placing in position complete and applying a priming coat of red lead paint complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Toll Tax, Sales tax ,GST or any other taxes imposed by the Government. In trusses and trussed purlins in buildings.

6mm (six millimeter) thick cement plaster to ceiling with cement mortar 1:3 (one cement isto three sand), up to all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on rough side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete as per HPPWD specifications or as per the direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete as per HPPWD specifications or as per the direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:5 (one cement isto five sand) in single coat on fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete as per HPPWD specifications or as per the direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax ,GST or any other taxes imposed by the Government.

Painting two or more coats (excluding priming coats) on new steel and other metal surfaces under coat with ready mixed paint other than white of approved brand and manufacture (Narolac/Asian paints) or its equivalent and of approved shade to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter complete upto all floor level as per HPPWD specifications or as direction by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning, oil, grease, dirt and other foreign matter sand papering and knotting with ready mixed paint brushing wood primer pink of approved brand and manufacture (Narolac/Asian paints) or its equivalent complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on new wood and wood based surfaces with enamel paint other than white of approved brand and manufacture (Narolac/Asian paints) or its equivalent and of approved shade to give an even shade including cleaning the surface of all dirt, dust and other foreign matter complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

White washing with lime on undecorated ceiling and/or sloping roofs (two or more coats) to give an even shade including thoroughly brooming the surface to remove all dirt, dust mortar drops and other foreign matter including preparing the surface even and sand papered smooth and carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Distempering (two or more coats) with dry distemper of approved brand and manufacture (Nerolac/Asian or equivalent make) and of required shade on un-decorated wall surfaces to give an even shade over and including primer coat of whiting of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth and carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Finishing wall with water proofing cement paint of approved brand and manufacture (Nerolac Surksha/Apex exterior) and of approved shade on undecorated wall surfaces (two or more coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, other foreign matter and sand papered smooth including applying of putty as required for making the surface smooth complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and laying under layer for plinth protection of 75mm (Seventy five millimeters) thick (unconsolidated) bed of dry brick/stone aggregate 40mm (Forty millimeters) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and laying plinth protection 50mm (fifty millimeters) thick cement concrete 1:3:6 (one cement isto three sand isto six graded crushed stone aggregate 20mm (twenty millimeters) nominal size including finishing the top surfaces of concrete smooth as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Constructing 15x22cm ( fifteen into twenty two centimeter) ‘U’ shape open surface drain with square rubble hammer dressed stone masonry wall in cement mortar 1:6 ( one cement isto six sand) and inside platering with cement mortar 1:3 ( one cement isto three sand) including earth work and laying 10cm (ten centimeters) cement concrete bed in 1:5:10 ( one cement isto five sand isto ten graded crushed stone aggregate 40mm (forty millimeters) nominal size) and 7.5 cm ( seven decimal five centimeters) cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm ( twenty millimeters) nominal size) at bottom joint of drain and finished with a floating coat of neat cement complete as per standard design including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing railing for stair case having baluster of 19mmx19mm (Nineteen millimeter into nineteen millimeter) M.S solid square bar with a clear height of 85cm (Eighty five centimater) at 60cm (Sixty centimater) centre to centre embedded in cement concrete steps and welded with electric welding at top along with handrail of hollow rectangular pipe of-14 (fourteen) to 16 (sixteen) gauge. Vertical balluster welded/jointed with each other with M.S flat 50x5mm (fifty into five millimeter) complete upto all floor level as per drawing and design including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in-Charge.The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Excavation in drains and channels etcetera in earth work in all kinds of classification of soil such as pick work, jumper work, blasting work, pick jumper blasting work, hard and soft blasting work including chiseling or wedging out rock where blasting is prohibited and doing work in saturated soil including cost of shoring, strutting and pumping or bailing out water (surface and sub soil water) upto any depth and any quantum of water including clearing of slush which may arise out during dewatering including dressing of sides and bed and disposing of all excavated earth up to any leads and lifts, disposed earth to be levelled and neatly dressed as per directions of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing to wall, ceiling and floor polyethylene aluminium polyethlene (PE.AL.PE) composite pressure pipe U.V stabilized with carbon black and fitting of kitec or its equivalent confirming to ISI 15450-2004 for water supply complete with necessary pipe fitting including cutting, fixing and making good the walls, ceiling and floor complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government. . 1216 (16mm (Sixteen millimeter) outer diameters pipe)

Providing and fixing to wall, ceiling and floorpolyethylene aluminium polyethlene(PE.AL.PE) composite pressure pipe U.V stabilized with carbon black and fitting of kitec or its equivalent confirming to ISI 15450-2004 for water supply complete with necessary pipe fitting including cutting, fixing and making good the walls, ceiling and floor complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government. 1620 (20mm (Twenty millimeter) outer diameters pipe)

Providing and laying in trenches ISI marked galvanized mild steel tubes (medium grade) tube fittings of approved brand and manufacture (TATA/JINDAL or its equivalent make) complete as per HPPWD specifications or as directed by Engineer-in-charge, (Earth work in trenches to be measured and paid for separately) including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government. . (20mm (twenty millimeters) nominal bore/ diameters)

Making connection of galvanized steel distribution branch with galvanized mild steel main 20mm to 40mm (twenty millimetre to forty millimeter) nominal bore by providing and fixing tee including cutting and threading the pipe complete as per HPPWD specification or as directed by Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including Octroi, Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and placing three layered PVC water storage tank, sintex or equivalent make and of having capacity 1000ltr. (One thousand liters) tank complete in all respects, with necessary fittings including G.I inlet and out let connection over flow pipe 15mm (fifteen millimetre) nominal bore ball valve scour pipe, with polythene float valve and mosquito proof PVC cover with locking arrangement including hoisting upto all heights and proving pads of sizes as required for inlet and outlet complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five millimeter) diameter high pressure P.V.C (polyvinyl chloride) (D-Plast) or its equivalent, spigot and socket, waste and ventilating of hight pipes confirming to IS code No.-13592 including fixing with adhesive of approved make complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) diameter high pressure P.V.C (polyvinyl chloride) (D-Plast) or its equivalent spigot and socket, waste and ventilating confirming to IS code No.-13592 including fixing with adhesive of approved make complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten millimetre) nominal diameter size pipe cast iron Holder bats of approved design to CI or SCI /PVC pipes embedded in cement concrete blocks 10x10x10cm (ten into ten into ten centimeter) of 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size) mix including cost of cutting holes and making good the walls complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 75mm (Seventy millimetre) nominal diameter/ size pipe cast iron Holder bats of approved design to CI or SCI/PVC pipes embedded in cement concrete blocks 10x10x10cm (ten into ten into ten centimeter) of 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size) mix including cost of cutting holes and making good the walls complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing P.V.C Hindware/Cera/Jaguar plain bend confirming to BIS-14735 including fixing with approved adhesive complete as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government. Plain bend 110mm (One hundred ten millimeter) nominal diameters.

Providing and fixing P.V.C Hindware/Cera/Jaguar plain bend confirming to BIS-14735 including fixing with approved adhesive complete as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government. . Plain bend 75mm (Seventy five millimeter) nominal diameters.

Providing and fixing P.V.C Hindware/Cera/Jaguar single equal branch plain ISI marked confirming to BIS-14735 including fixing with approved adhesive etcetra complete and carriage of materials with in all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government. 110mm (One hundred ten millimeter) diameters.

Providing and fixing P.V.C Hindware/Cera/Jaguar single equal branch plain ISI marked confirming to BIS-14735 including fixing with approved adhesive etcetra complete and carriage of materials with in all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government. . 75mm (Seventy five millimeter) diameters.

Providing and fixing ISI marked PVC Hindware/Cera/Jaguar collar confirming to BIS-14735 complete upto all floor level as per HPPWD specifications or as directed by the Engineer-in-Charge, including fixing with approved adhesive and carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government. 75mm (Seventy five millimeters) nominal diameters.

Providing and fixing ISI marked PVC Hindware/Cera/Jaguar collar confirming to BIS-14735 complete upto all floor level as per HPPWD specifications or as directed by the Engineer-in-Charge, including fixing with approved adhesive and carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government. 110mm (one hundred ten millimeters) nominal diameters.

Providing and fixing PVC Hindware/Cera/Jaguar heal rest bend confirming to BIS-14735 including fixing with approved adhesive complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government. . 110mm (One hundred ten millimeter) nominal diameters.

Providing and fixing PVC Hindware/Cera/Jaguar heal rest bend confirming to BIS-14735 including fixing with approved adhesive complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government. . 75mm (Seventy five millimeter) nominal bore/diameters.

Providing and fixing ISI marked 110x90mm (One hundred ten millimeters into ninety milimeters) P.V.C (Hindware/Cera/Jaguar) floor trap of self cleaning design complete including fixing with approved adhesive, cost of cutting and making good the walls and floors etcetra complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing ISI marked PVC Hindware/Cera/Jaguar cowl confirming to BIS-14735 complete including fixing with approved adhesive upto all floor level as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.110mm (one hundred ten millimeters) nominal diameters.

Providing and fixing ISI marked PVC Hindware/Cera/Jaguar cowl confirming to BIS-14735 complete including fixing with approved adhesive upto all floor level as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government. . 75mm (Seventy five millimeters) nominal diameters.

Providing and fixing HIND WARE/CERA MAKE or its equivalent orrisa pattern vitreous china water closet squatting pan (Indian type W.C. pan) size 580mm (five hundred eighty millimeter) (Earth work, bed concrete, foot rest and trap to be measured and paid for separately) including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing ISI marked sand cast iron 100mm ( one Hundred millimeters) size “P” or “S” trap for water closet (squatting pan) including jointing the trap with pan and soil pipe in cement mortar 1:1 (one cement isto one sand), complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing HIND WARE/CERA or equivalent MAKE poly Venyl Chloride 10.00/12.50 (ten/twelve point five zero liters) capacity low level flushing cistern I.S marked No. 2603 with a pair of CI or MS mild steel brackets complete with fittings such as lead valves less syphon, 15mm (fifteen millimeter) nominal size brass ball valve with polythene float, CP brass handles, unions and couplings for connection with inlet, outlet and over flow pipes 40mm (forty millimeters) diameter PVC flush bend including cutting holes in walls and making good the same including connecting the flush bend with cistern and closet complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing flat back vitreous china wash basin ISI marked No. 10001 of size 55x40cm (fifty five into forty cemtimeter) Hindware/Cera/Jaguar with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fitting. complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing ISI marked, stainless steel kitchen sink 470x420x178mm (four hundred seventy into four hundred twenty into one hundred seventy eight millimeters) diamond model Code No. WB-2116 with C.I or M.S brackets painted white including cutting holes in walls and making good the same complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 32mm( thirty two millimeters) nominal diameter rubber plug for wash basin or sink (Heavy duty makes ISI marked is No. 8931 7893) including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeters) nominal diameters M.I. union for wash basin or sink complete including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeters) nominal diameters C.P brass waste pipe of Hindware/Cera/Jaguar for wash basin or sink complete including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 32mm( thirty two millimeters) nominal diameter C.P bottle trap for wash basin or sink. (Heavy duty makes ISI marked is No. 8931 7893) including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeters) nominal diameter PVC waste pipe for wash basin or sink including brass check nut complete and carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing ISI marked, 100mm (One hundred millimeters) diameter sand cast iron grating of Jaguar or equivalent for gully, floor or Nahni trap complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 600x450mm (Six hundred into four hundred fifty millimeters) bevelled edge mirror of superior glass (atultuff or equivalent make) mounted on 6mm (Six millimeters) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 600x20mm (six hundred into twenty millimeters) C.P. brass towel rail of Jaguar/Hindware or equivalent complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll Tax, Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 600x120mm (Six hundred into one hundred twenty millimeters) glass shelf with C.P brass bracket and guard rail complete fixed to wooden plugs with C.P brass screws including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll Tax, Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing chromium plated brass soap dish with C.P brass brackets fixed to wooden cleats with C.P brass screws complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing Jaguar or its equivalent 15mm (Fifteen millimeters) diameters C.P. brass bib tap with capstain head ISI marked of approved quality (with capstain head) complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) diameter CP brass stop cock complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing (Jaguar or equivalent make) 15mm (fifteen millmeters) brass angle valve without nuts and pipes complete including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing ISI marked 45cm (forty five centimeters) long and 15mm (fifteen millimeters) nominal bore PVC connection pipe with brass unions complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeters) nominal bore brass full way valve with wheel complete upto all floor level as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing chromium plated brass toilet paper holder of approved brand and manufacture (HINDWARE/CERAMAKE) or its equivalent complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and fixing two hole basin mixing faucet complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and laying (to level or slopes) 150mm (One hundred fifty millimeters) internal diameter high pressure PVC pipe including fixing with adhesive of approved make for sewerage line complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 (one cement isto five sand isto ten graded crushed stone aggregate 40mm (forty millimeter) nominal size) bedding for P.V.C/stone ware pipes of internal diameter 150mm (One hundred fifty millimeters) including necessary form work and curing complete and carriage of materials within all leads , lifts and other incidental. The rate inclusive of Octroi, Toll Tax ,Sales tax,GST or any other taxes imposed by the Government.

Constructing man hole with RCC top slab in cement concrete 1:2:4 (one cement isto two sand isto four graded stone aggregate 20mm (twenty millimeters) nominal size) mix, foundation concrete 1:4:8(one cement isto four sand isto eight graded crushed stone aggregate 40mm (forty millimeter) nominal size) inside plastering 15mm (fifteen millimeters) thick with cement mortar 1:3 (one cement isto three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size finished smooth complete including curing and testing. Inside size 800x800mm (eight hundred into eight hundred millimeter) and 500mm (five hundred millimeter) deep including C.I. cover with frame (light duty single seal pattern-I) 455mmx610mm (four hundred fifty five millimeters into six hundred ten millimeters) internal dimensions total weight of cover and frame to be not less than 38 kg (thirty eight kilogramme) (weight of cover 23 kg (twenty three kilogramme) and weight of frame 15 kgs (fifteen kilogramme (a) with 300mm (three hundred millimeter) thick walls of square rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement isto three sand) complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Constructing man hole with RCC top slab in cement concrete 1:2:4 (one cement isto two sand isto four graded stone aggregate 20mm (twenty millimeters) nominal size) mix foundation concrete 1:4:8(one cement isto four sand isto eight graded crushed stone aggregate 40mm (forty millimeter) nominal size) inside plastering 15mm (fifteen millimeters) thick with cement mortar 1:3 (one cement isto three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size) finished smooth complete including curing and testing. Inside size 800x800mm (eight hundred into eight hundred millimeter) and upto any depth including C.I. cover with frame (light duty single seal pattern-I) 455mmx610mm (four hundred fifty five millimeters into six hundred ten millimeters) internal dimensions total weight of cover and frame to be not less than 38 kg (thirty eight kilogramme) (weight of cover 23 kg (twenty three kilogramme) and weight of frame 15 kgs (fifteen kilogramme (a) with 300mm (three hundred millimeter) thick walls of square rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement isto three sand) complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Constructing brick masonry chamber for under ground CI (cast iron) inspection chamber and bends with second class common burnt clay building brick in cement mortar 1:5 (one cement : five sand) CI cover with frame light duty 355x610mm (three hundred fifty five into six hundred ten millimeters) internal dimensions total weight of cover with frame to be not less than 38 kg (thirty eight kilogramme) (weight of cover 23 kg (twenty three kilogramme) and weight of frame 15 kgs (fifteen kilogramme) with RCC top slab in cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size), foundation concrete 1:5:10 (one cement : five sand : ten graded crushed stone aggregate 40mm (forty millimeter) nominal size) inside plastering 15mm (fifteen millimeter) thick with cement mortar 1:3 (one cement isto three sand) finished smooth with a floating coat of neat cement on walls and bed concrete etcetra complete, inside dimensions 455x610x450mm (four hundred fifty five into six hundred ten into four hundred fifty millimeters) deep single pipe line complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including Octroi Sales tax, Toll tax,GST or any other taxes imposed by the Government.

Providing and fixing stone ware gully trap grade-A complete with CI grating and brick masonry chamber in cement mortar 1:5 (one cement isto five sand) and water tight CI cover with frame of 300x300mm (three hundred into three hundred millimeter) size (inside) the weight of cover to be not less than 4.53Kg (four point five three kilogramme) and weight of frame to be not less than 2.72Kg (two point seven two kilogramme) square mouth trap 150x100mm (one hundred fifty into one hundred millimeter) size P or R type complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materialswith in all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:5:10 (one cement isto five sand isto ten graded crushed stone aggregate 40mm (forty millimeter) nominal size) in or under water, including pumping or bailing out water/ dewatering, removal of slush which may arise at the time of laying under water complete in hanuching of stone ware pipe of 150mm (One hundred fifty millimeter) diameter including concrete for bedding necessary, form work and curing complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and laying in trenches 100mm (one hundred millimeter) diameter PVC D-Plast 2.20mm (two point two zero millimeter) thick pipe supreme or equivalent rain water pipes of working pressures not less than 4.5 kg/Sqm (four point five kilogramme per square metre) including fixing with approved adhesive upto all floor level, complete as per HPPWD specifications or as per directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Ashwani