Maint and painting of Chesses Junction EWBB, Cross Frame FBE (For Boat Floting), Deck Panel Sliding bay MK-I, Leaver Rafting FBE MK-III w/o Handle, Handle for Leaver Rafting, Lifter Rod Bearer MK-II and Wooden base Raft Trastel.

MAINT AND PAINTING OF CHESSES JUNCTION EWBB, CROSS FRAME FBE (FOR BOAT FLOTING), DECK PANEL SLIDING BAY MK-I, LEAVER RAFTING FBE MK-III W/O HANDLE, HANDLE FOR LEAVER RAFTING, LIFTER ROD BEARER MK-II AND WOODEN BASE RAFT TRASTEL.

CHESSES JUNCTION EWBB

CROSS FRAME FBE (FOR BOAT FLOTING)

DECK PANEL SLIDING BAY MK-I

LEAVER RAFTING FBE MK-III W/O HANDLE

HANDLE FOR LEAVER RAFTING

LIFTER ROD BEARER MK-II

WOODEN BASE RAFT TRASTEL

NOTE;- (i) The above work involves taking out from existing stack and remove them to a distance out in a open area and lay them on a pre-cleaned ground on dunnage cubes. (ii) Remove dust, dirt and disused and deteriorated layer of old paint throughly from the surface using course wire brush and specially designed chisels. The surface shall then be throughly cleaned with water and rubbed with abrasive paper. Special care shall be taken for removing dust, dirt and rust scale from re-entrant angles, corners joints and hidden portion. Apply one coat of red oxide metal primer/wood primer (Make /Asian/Berger) and allow drying for 48 hours except Wooden track Assault Raft. Apply two coats of paint OG (Make: Shalimar/Asian/Berger) over primer coat and allow drying for 48 hours. (iii) The above preserved store will be shifted from open area to storage shed on proper dunnage using concrete cubes and anti termite steel tray that shall be issued by the Department for dunaging in accountable position as per direction of Engineer-in-charge. (iv) Numbering will be done of size 2" letter with white enamel paint as per direction of Engr-in-charge.

OM ENTERPRISES

Pankaj Enterprises