SPECIAL REPAIRS / REPLACEMENT OF OLD ELECTRICAL WIRING AND LT PANELS AT T-57 ANNEXE AND ATD BUILDING AT INS GARUDA AND CERTAIN SANCTIONED WORKS UNDER GE (NW) KOCHI AT NAVAL BASE KOCHI

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc.all as specified and directed.

M&L for point wiring with 1.5 sqmm (FRLSH) PVC insulated unsheathed multistranded single core copper conductor cable in non rigid PVC concealed conduit except beam, column and RCC roof and chases cuttung incl suitable for modular switch and socket (sunken box) incl MS sheet pressed terminal box (recessed) with modular cover plate incl 1.5 sqmm PVC insulated copper conductor earth continuity wire for one light/fan point controlled by one switch and making good disturbed surfaces of walls, floors, etc.

All as per item No. 2 here in above but 5 pin 5/6 Amps switch socket outlet point on independent board.

All as per item No. 2 here in above but 5 pin 5/6 Amps switch socket outlet point on same board.

All as per item No. 2 here in above but 6 pin 15 Amps switch socket outlet point on independent board with 2.5 sqmm (FRLSH) PVC insulated unsheathed stranded copper conductor with 2.5 sqmm PVC (FRLSH) insulated stranded copper wire for continuous earthing.

S&F ceiling rose PVC/Polycarbonate ,surface type 65x50mm three terminals complete all as specified and directed. Make- Legrand/Anchor/Crabtree

S&F Moduler socket shuttered 6/16 A 6 Pin combined 3 module controlled by one switch,complete all as specified and directed. Make- Legrand/Anchor/Crabtree

S&F Moduler socket shuttered 6A, 5 Pin combined 2 module controlled by one switch,complete all as specified and directed. Make- Legrand/Anchor/Crabtree

S&F switch 6 A One way SP modualr type sigle pole one way 5Amp,complete all as specified and as directed. Make-Legrand/Anchor/Crabtree

S&F switch 16 A one way SP modular type, complete all as specified and directed. Make- Legrand/Anchor/Crabtree

S&F stepped type electronic Modular fan regulator flush type, 120/100 W-2 Module complete all as specified and directed.

S&F switch piano, flush type, 5 Amp, one way complete all as specified and as directed.

Taking down existing ceiling fan, with sealing cable and dismantling blades and painting two coat with synthetic enamel paints by spraying including filling cavities with filler servicing and rehanging on original position including necessary connection with copper conductor.

Hanging only ceiling fan (MD supply) and connecting up including provision of cable from ceiling rose or connector to fan.(Note: Ceiling fan including down rod will be issued under Schedule B free for fixing only)

Supply & fix exhaust fans AC single phase 230/240 V of size 380 mm sweep with louver including cutting of wall and making good surfece and all as specified and directed.

M&L for submain wiring with 2 runs of 4 sqmm (FRLSH) PVC insulated unsheathed multistranded copper conductor cable and 1 run of 4 sqmm (FRLSH) cable as earth continuity wire and including PVC conduit concealed in wall/floor including cutting chesses and making good disturbed surface to match with existing surface. (Note:- 1. Two runs of 4 sqmm FRLS and one run of 4 sqmm FRLSH copper conductor shall be measured as one unit length. 2. Including taking down old unserviceable sub main wiring.)

M&L for submain wiring with 2 runs of 6 sqmm (FRLSH) PVC insulated unsheathed multistranded copper conductor cable and 1 run of 6 sqmm (FRLSH) cable as earth continuity wire and including PVC conduit concealed in wall/floor including cutting chesses and making good disturbed surface to match with existing surface. (Note:- 1. Two runs of 6 sqmm FRLS and one run of 6 sqmm FRLSH copper conductor shall be measured as one unit length. 2. Including taking down old unserviceable sub main wiring.)

M&L for submain wiring with 4 runs of 6 sqmm (FRLSH) PVC insulated unsheathed multistranded copper conductor cable and 1 run of 6 sqmm (FRLSH) cable as earth continuity wire and including PVC conduit concealed in wall/floor including cutting chesses and making good disturbed surface to match with existing surface. (Note:- 1. Four runs of 6 sqmm FRLS and one run of 6 sqmm FRLSH copper conductor shall be measured as one unit length. 2. Including taking down old unserviceable sub main wiring.)

M&L for submain wiring with 4 runs of 10 sqmm (FRLSH) PVC insulated unsheathed multistranded copper conductor cable and 1 run of 10 sqmm (FRLSH) cable as earth continuity wire and including PVC conduit concealed in wall/floor including cutting chesses and making good disturbed surface to match with existing surface. (Note:- 1. Four runs of 10 sqmm FRLS and one run of 10 sqmm FRLSH copper conductor shall be measured as one unit length. 2. Including taking down old unserviceable sub main wiring.)

M&L for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 m below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 15 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch all as shown in electrical plate No 3 of SSR Part-I 2009 including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded stone aggregate), 50mm thick precast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover slab (reinforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia), with 40x40x6mm MS angle iron frame including necessary earth work and testing on completion, complete all as specified and as directed.

S&F Tube light fitting 1 x20 w ,with T 8 LED tube with aluminium Extrusion heat sink for optimum performance with high luminous efficiency and batten pre wired suitable for use with LED tube with concealed accessories complete. including taking down old one complete all as specified and directed. Make: Philips Cat part No;TMC501 P 20W 1XT LED P3241+ESSENTIAL LED TUBE 20W 1200MM 20W 865 T8 IND/HAVELLS/WIPRO

S&F LED Mini mirror ligtht 1 x 14 Watt Wall/surface mounted luminaries with engineering plastic housing, wired with all accessories complete incl provn of flexible copper wire from ceiling rose to light fitting terminal. Make :- Make Crompton Cat No. LCL-14-CDL/ Philips/bajaj.

S&F sheet metal enclosure MCB SPN DB 8 way double door (metal door) IP 43 type suitable for 200 Amp / including all electrical connection all as specified and as directed,Make-L&T/Crabtree/Legrand.

S&F sheet metal enclosure Vertical TPN DB 8 way double door suitable for MCCB up to 160 Amp, IP 43 type including all electrical connection all as specifeid and as directed. Cat Part No. DCDLVDCBGSTE12 of Crabtree or equivalent Indoasian, Legrand.

S&F 3 pole MCCB 63 to 100 Amp, 50 Hz, 415 V with rupturing capacity 25 KA,complete all as specified and directed Make-L&T/Crabtree/Legrand.

S&F MCB SP 6 Amps to 32 Amps 240 volt ,all as specified and directed,capacity complete all as specified and directed,Make-L&T/Crabtree/Legrand.

S&F MCB SPN 32 amp, 240 volts, 10 KA including all electrical connection all as specified and as directed,Make-L&T/Crabtree/Legrand.

S&F ceiling fan ,1200 mm sweep.230 volt, complete with hanging Rod and accessories complete all as specified and directed make: model ES -40 of Havells/Usha/V Guard .

S&F heavy duty exhaust fans AC single phase 230/ 240 V of size 300 mm sweep all as specified and directed model -turbojet SP of Havells/Usha/VGuard

Supply and fix Wall mounted fans of size 450 mm sweep AC single phase 230 / 240 V all as specified and directed,Turbo force of Havells/Usha/VGuard

Supply only Swing type Pedestal fans of size 400 mm sweep AC single phase 230 / 240 V , Model: Aindrila standerd all as specified and directed.

Material and labour for point wiring for one light/fan point with 1.5 sqmm PVC insulated (FRLS) unsheathed copper conductor multistranded 1100 volts grade controlled by one one way switch including 1.5 sqmm PVC (FRLS) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity conductor including connected to common earth dolly drawn through and including rigid PVC Conduit medium grade ISI marked Concealed of suitable size with all accessories and sunken box of 1.2mm thick pressed steel box factory made for mounting of switch, socket and fan regulator with modular frames covers including chase cutting and making good to the disturbed surface and matching to the existing finishes specifications complete all as specified and as directed by the Engr-in-Charge.

All as per item No 32 here in before but for one bell point controlled by one 5 Amp bell push on independent board complete all as specified and directed.

All as per item No 32 here in before but for one 5 pin 5 Amp socket outlet point on independent board complete all as specified and directed.

All as per item No 32 here in before but for one 5 pin 5 Amp socket outlet point on the same board complete all as specified and directed.

All as per item No 32 here in before but using with 2.5 Sqmm copper conductor cables multistranded (FRLS) PVC insulated , unsheated cable and including 2.5 Sqmm copper conductor cable multistranded(FRLS) PVC insulated and unsheated cable as earth continity wire and connecting to common earth dolly for one 6 pin 15 Amp socket outlet point on independent board complete all as specified and directed.

M&L for sub main wiring with 2 runs of 4 Sqmm (FRLS)PVC insulated unsheathed multistranded copper conductor cable and 1 run of 4 Sqmm (FRLS) cable as earth continuity wire and including PVC conduit concealed in wall/floor including cutting chesses and making good disturbed surface to match with existing surface. ( Note :- 1. Two runs of 4 sqmm FRLS and one run of 4 sqmm FRLS copper conductor shall be measured as one unit length.) 2. Including taking down old unserviceable sub main wiring

Supply and fixing sheet metal enclosuers with socket plug top and MCB 20 Amp .

S&F in replacement bell push modular 5 Amps, single pole all as specified and directed.

S & F in replacement modular type socket outlet 3 pin, 6 Amps complete all as specified and directed

S&F in replacement switch modular type single pole, 6 Amps, one way all as per specified & directed.

S&F in replacement Modular sockets multipurpose 6 Amp & 16 Amps, 5 pin complete all as specified and directed

S&F in replacement switch modular type single pole, 16 Amps, one way all as per specified & directed.

S&F in replacement electric bell, AC 230V, single pole complete all as specified and as directed.

S&F in replacement modular fan regulator 100W, 250V, step type complete all as specified and as directed.

Material and labour for submain wiring with 4 runs of 10 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLS cable 1100 volts grade drawn through PVC caping and casing with all accessories on surface, two runs of 6 Sqmm cable single core PVC insulated, unsheathed, ,1100 Volts grade multistranded copper conductor FRLS cable as earth continuity conductor and connecting with suitable size thimble including cutting the chases etc and making good the disturbed surface to match with the existing complete all as specified and directed. Note:-Four runs of 10 Sqmm size PVC copper cable, two run of 6 Sqmm size PVC copper cable and one run of PVC caping and casing shall be measured as one unit length.

M&L for sub main wiring with 2 runs of 10 Sqmm (FRLSH)PVC insulated unsheathed multistranded copper conductor cable and 1 run of 10 Sqmm (FRLSH) cable as earth continuity wire and including PVC conduit concealed in wall/floor including cutting chesses and making good disturbed surface to match with existing surface ( Note :- 1. Two runs of 10 sqmm FRLSH and 1 run of 10 sqmm FRLSH copper conductor shall be measured as one unit length.) 2. Including taking down old unserviceable sub main wiring

S & F in replacement sheet metal enclosure TPN for DB's when MCB's to be used 4 way with 200 amps bus bar and double door complete all as specified and directed.

S & F in repair Sheet Metal Enclosure for MCB DB, SPN, 8 ways, double door, with 200 Amps rated bus bar, having IP-43 protection including taking down old DB complete all as specified. Make -indoasian,havells,legrand L&T .

S&F in repair FP vertical load line 08 way DB (with MCCB as incomer) suitable for upto 160 Amp MCCB IP 43 all as specified and directed. Make Indoasian cat part no. 8111872 / L&T / Havells

S & F in repair 4 Pole MCCB 125 to 160 Amp, 50 Hz, 415 V with rupturing capacity 35 KA. complete with enclosure and all incoming/outgoing connections with proper size of lugs complete all as specified and directed.

S&F in repair MCB SPN 40 amp ,240 Volts ,10 KA including all electrical connection all as specified and as directed cat part no - 811035 of Indoasian or L&T Legrand,indoasian .

Supply and fixing Axeon LM 34 suspended linear LED light solution for contemporary workspace extruded aluminium housing with high transmittivity HET deffuser for standalone and seamless end to end connectivity 30 watt ,240 volt with universal suspension system with the quick on site adjustment mounting with 2 Nos suspension from the ceiling for axeon cat part no - LM34-361-XXX-57WG1 and suspension cat part no -LMX342 of wipro or equivalent make of Havells, Jaguar,Crompton

Taking out existing LT panel board with main switches, change over switch etc. after disconnecting the incoming and out going cables, earthing strips with angle iron frame etc and removing tpo store including transportation, loading, unloading etc.

Supply, design, erection and commissioning of LT panel board indoor type platform mounted fabricated through CPRI approved factory manufacturers, totally enclosed dust and vermin proof openable from both front and rear side made out of self supported 3 mm thick CRCA (Cold Rolled Cold Annealed) MS sheet of suitable length, width and height as per IE rule to accomodate all the items and conforming to IS-8623 and built upon 40 x 40 x 6 mm size angle frame work and lugs fixed on existing cable trenches having fron t and rear hinged doors with neoprene rubber gasket, danger plate, GI earthing strips at rear side, bottom detachable gland plate complete with suitable size single plated and passivated nuts, bolts, spring washers. The cabinet and all members shall be chemically treated with MSR solution for aircorrosive treatment and powder coated (shade RAL - 7032) with 9 tank process and shall be with IP-65 grade protection. The panel shall be suitable for 415 volts, 50 Hz 3 phase 4 wire system and internal connections which shall be provided with aluminium strips of suitable size and comprising of the following accessories.

S & F socket outlet 2 in 1 3 pin 5 amp

S&F switch socket combination 2 in 1 3 pin 5/15 amp flush type

Supply & fix LED down lighter 2'x2' , 36/40 W 240 volt all as per specified and directed. Make Havells Cat Part No. ENDURASLIMPROPLUS 2x2 PLR36WLED 840MOD and driver LEDDRIVER36V36WS or equivalent Philips/ Crompton including taking down all type.

Supply & fix Regal Batten for LED tube lights, both side connection type and LED tube rod 1 x 20 Watt, both side connection all as specified and as directed. Make : Havells Cat Part No. REGALBATTENT8 upto 1x822W SSBSWH for Regal Batten & CRYSTAL 1213T8DSTL20W LED 8655 GLASS for tube rod or equivalent Philips/ Crompton

Supply & fix LED down lighter, 12 to 16 W,240 volt all as per specified and directed. Make Crompton Cat Part No. LSDEP-12-CDL or Philips/ Jaguar

S & F for LED Tube light fitting 7 watt with connected accessories complete all as specified & directed. Make :Crompton Model No LCL-07-CDL or Philips/ Jaguar

S&F fan regulator electronic step type 100 watt flush type

S&F Sheet metal enclosures with socket plug top and MCB' single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 A MCB

S&F Sheet metal enclosure TPN for DB's when MCB's to be used 4 way with 200 amps bus bar double door

S&F Sheet metal enclosure TPN for DB's when MCB's to be used 8 way with 200 amps bus bar double door

S&F Sheet metal enclosure TPN for DB's when MCB's to be used 12 way with 200 amps bus bar double door

S&F MCCB 4 pole 160 Amp 415V 36KA adjustable type.all as specified and directed .

S&F MCCB 4 pole 200 Amp 415V 36KA adjustable type.all as specified and directed .

S&F MCCB 4 pole 250 Amp 415V 36KA adjustable type.all as specified and directed .

S&F MCB 'C' Curve 100 Amp Three pole, 415 Volts, Make L&T Cat Part No. AU15S31003C all as specified and directed .

S&F MCB 'B' Curve 63 Amp Three pole, 415 Volts, Make L&T Cat Part No. BB30630B all as specified and directed.

S&F MCB 'B' Curve 63 Amp SPN ,240 Volts Make L&T Cat Part No. BB20630B all as specified and directed.

S&F MCB 'B' Curve SP 6 To 40 Amp , 240 Volts,Make Schneider Cat Part No. A9N1P06B to A9N1P40B, all as specified and directed.

S&F RCCB 63 Amp For earthing leakage protection four pole 100 m all as specified .

M&L in repair earthing complete with galvanised steel earth plate electrode 60 cm x 60cm x6 mm thick, buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meters below normal ground level, connected to GI earth lead wire 4mm dia upto length 7.5 mtr by means of bolts, nuts and washers of galvanised steel all as shown in electrical plate No. 3 connected to earthing test point complete all as specified and indicated including testing on completion including taking out old earthing complete. Note : The rate is deemed to be inclusive of the cost of complete earth work in any type of soil. PCC 1:3:6 type C-1 for chamber,RCC 1:2:4 type B1 for cover slab 50 mm thick, reinforcement 8 mm CTD bars @ 100 mm c/c both way, necessary form work, handle, charcoal dust 20mm dia GI med grade for watering and 40mm dia GI med grade earth lead protection pipes with funnel and wire mesh all complete all as specified and directed.

Supply and fixing building security light made up of pressure die cast housing with toughened glass and high power LEDs with option of secondary optic with IP 66 protection of 30 Watt Crompton Cat Part No. LSTS-30-CDL/NL-M including suitable GI bracket of 25 mm dia and fixing arrangement on walls all as specified and directed including taking down of existing light fitting of any type and make.

S&F LED flood light made up of pressure die cast housing with toughened glass and high power LEDs with option of secondary optic with IP 66 protection, 3000 K, with 10 KV SPD of 50 watt of Crompton Cat Part No. LFL-50-CDL all as specified and directed including taking down of existing light fitting of any type and make.

Taking down existing light fittings/high bay lights etc. of any make and type and keep aside for re-wiring for or for removing store yard all as specified and directed,

Re-fixing of the light fittings of any type and size at place where directed obtained as per Srl. Item No. 78 including connecting to the existing electrical system all as specified and directed.

Supply and fixing box type, both side connections LED tube light fitting (Regal Batten) with both side connection pre wired and LED tube rod 20W both side connections with diver including all fixing accessories and connections to the existing electrical system. Make Havells Cat Part No. BATTENT 8 UPTO 1x 22W SSWSSBSWH & CRYSTAL 1213T8DSTC20WLED 865 SGLASS, Crompton IGP161LT8-16 & Cat Part No. LT8-20-865-2, Jaquar Cat Part No. LGLZ01X020XC & Cat Part No. LTBLGlX020C

Supply and fix in repairs tube rod 20W, both side connections on existing box type fittings including making necessary connections all as specified & directed after removing existing conventional tube rods and ballasts. Make : Crompton Cat Part No. LGT8/20-865-2, Luker Cat Part No. LT1818T-5Y, Wipro Cat Part No. D622065, Havells Cat Part No. Crystal 1213T8DSTL20WLED865SGLASS.

S&F high bay light fitting round type in PDC housing suitable for industrial application. The luminaire efficiency of 110Lm/w with protection of IP-66. Make Crompton Cat Part No. LHB11-100-CDL/60-M or equivalent make of Jaguar/Philips

Taking down old stop valve,stop cock,bib cock ,swivel shower,from existing position including all fittings all as specified and as directed.

S&F on wall / ceiling (concealed) CPVC pipe 25 mm dia SDR 11 & plain SDR 11 fittings.Make:- Supreme

S&F on wall / ceiling (concealed) CPVC pipe 20mm dia SDR 11 & plain SDR 11 fittings.Make:- Supreme

S&F Gunmetal globe or gate valve 25 mm dia iron wheel head screwed both ends for PVC pipes incl taking out old.

Supply & fix stop valve (angle type) cast copper alloy high pressure,screwed for 15mm dia CP fancy type (Half turn) .Make:-CERA/JAGUAR/HINDWARE

S&F bib tap cast cooper alloy fancy type screwed for iron pipe 15mm dai CP.

S&F shower rose with shower arm CP swivel type of bore 15mm, face dai 125mm.

S&F Two way bib tap with wall flange of size 15mm dia (Make- CERA Cat No. F 2004163 or equivalent make of Jaguar/Parryware) complete all as specified and directed including takind down

Supply & fix of concealed stop cock(half turn) with sliding flange CP fancy type of size 15mm .Make:-CERA/JAGUAR/HINDWARE complete all as specified and directed including taking down

S&F Health faucet ABS body with wall hook & 1Mtr SS braided flexible tube complete. (Make-CERA Cat No- Cera F 8030102 ) all as specified and directed including taking down old one

Taking down old unserviceable GI tubing of size 20mm

Taking down old unserviceable GI tubing of size 25mm

Supply and fixing in replacement of Rotational mouldede polyethylene water storage tanks (cylinderical vertical with closed top) hoisted & fixed in position of capacity 500 litres complete all as specified.

Supply and fixing in replacement of Rotational mouldede polyethylene water storage tanks (cylinderical vertical with closed top) hoisted & fixed in position of capacity 1000 litres complete all as specified.

Supply & fixing of PVC connections 15mm dia size with PTMT nuts of length 450mm and taking down old one complete with brass union on both sides to suit 15mm GI pipe.

Material and labour for point wiring with 1.5 sqmm PVC insulated (FRLSH) unsheathed copper conductor multistranded 1100 volts grade controlled by one one way switch including 1.5 sqmm PVC (FRLSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for earthy continuity conductor including connected to common earth dolly drawn through and including rigid PVC conduit medium grade or PVC casing and caping, ISI marked, fixed to wall/roof with all accessories and PVC switch board/laminated sheet top cover of suitable size for mounting of switch, socket and fan regulator etc complete for one light/fan point controlled by one switch all as specified and as directed by the Engr-in-Charge.

All as per item No 98 here in before but for one 5 pin 5 Amp socket outlet point on independent board complete all as specified and directed.

All as per item No 98 here in before but for one 5 pin 5 Amp socket outlet point on the same board complete all as specified and directed.

All as per item No 98 here in before but using with 2.5 Sqmm copper conductor cables multistranded (FRLSH) PVC insulated , unsheated cable and including 2.5 Sqmm copper conductor cable multistranded(FRLSH) PVC insulated and unsheated cable as earth continity wire and connecting to common earth dolly for one 6 pin 15 Amp socket outlet point on independent board complete all as specified and directed.

All as per item No 98 here in before but using with 4 Sqmm copper conductor cables multistranded (FRLS) PVC insulated , unsheated cable and including 4 Sqmm copper conductor cable multistranded(FRLS) PVC insulated and unsheated cable as earth continity wire and connecting to common earth dolly for sheet metal enclosure complete all as specified and directed.

Albert Rebello and Company

ANIE JOHN CONTRACTORS

SREENARAYANA ENTERPRISES

PHEJAYS AGENCIES

P N Enterprises