SITC of New DG SET and related Electrical work with 04 years CMC (after 01 Year DLP) and 05 Years Operation at Various Community Health Centers of Ahmedabad Municipal Corporation.

SCHEDULE - B BID SUMMARY

Name of work : SITC of New DG SET and related Electrical work with 04 years CMC (after 01 Year DLP) and 05 Years Operation at Various Community

Health Centers of Ahmedabad Municipal Corporation.

Sr. No. Description Amount in Rs.

1.00 PART A - SITC OF DG SETS AND ELECTRIFICATION WORK ₹

2.00 PART- B - COMPREHENSIVE MAINTAINANCE CHARGES FOR FIVE (05) YEARS INCLUDING DLP PERIOD ₹

3.00 PART- C - MANPOWER FOR OPERATION FOR FIVE (05) YEARS INCLUDING DLP PERIOD ₹

4.00 PART-D-ARC OF ELECTRICALS ITEMS AS AND WHEN REQUIRED FOR ANY CHC ₹

5.00 PART -E CIVIL WORK ₹

Total Basic Amount of (Part- A + Part- B + Part-C) in Rs. ₹

GST 18% in Rs. ₹

Total Amt………………………………………with GST ₹

I am/we are willing to carry out work _____________% above/Below (Should be written in figure and Words ) the estimated cost mentioned in above. The amount of my/our

tender works out as under

Signatureof the Tenderer

Name Addi Chief Engineer (Electrical)

Name of work : SITC of New DG SET and related Electrical work with 04 years CMC ( after 01 Year DLP ) and 05 Years Operation at Various Community Health Centers of Ahmedabad Municipal

PART A - SITC OF DG SETS AND ELECTRIFICATION WORK

Sr. No. Item Description Unit Total Unit Rate Qty AMOUNT

DG SET- 160 KVA

Supplying and erecting, commissioning and testing of Diesel Generating set confirming to IS: 4722:1968 & BS:5514 having

continuous rating, 3 phase, 415 volts, 50 cycles A.C. supply comprising of a totally enclosed air/water cooled diesel engine with multi-

cylinders developing suitable BHP not less than following capacity at 1500 RPM with 10% overload for one hour in 24 hours with

standard accessories like fly wheel, lubricating oil cooler, "A" class governor, heavy duty fuel wheel and lubricating oil filter, oil bath

air filler, lubricating oil pressure gauge, end exhaust manifold, standard set of tools with adjustable spanners, screw drivers, cylinder

head to cover, joint cylinder head to exhaust, element lube oil filter, 12 / 24 volts electric starting equipment complete with standard

heavy duty battery, dynamo, cut-outs, ammeter, necessary wiring, pressure gauge, starter etc and heavy duty Residential type

exhaust silencer (With DEF System) and vertical hot air duct both

logged with asbestos rope, save oil trays, exhaust piping of required length, standard wall/floor mounted fuel with level indicator

and piping and drip proof alternator, self excited, self regulated, screen protected, with excitation system, capable of delivering the

rated system output at 415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire, running at 1500 RPM, conforming to IS-4722- 1968 with voltage

regulation +/- 5% of rated voltage from no load to full load. Both the engine and alternator fitted on a common fabricated steel

1 base plate with antivibration mounting engine and alternator both connected to each other by flexible flange coupling and with

floor/wall mounted control panel box comprising of voltmeter ammeter, selector switches, ACB / MCCB / MCB of adequate

indicator lamps duly wired with HRC fuses. The alternator & control panel shall be connected with provided suitable capacity

armoured cable and complete with Acoustic enclosure (canopy) made out of 16 SWG CRCA Sheet, sound absorbing material

Rockwool of 64 density & 100 mm thick conforming to IS:8183 / PU Foam of 40 Density - at least 40 mm. The resin bonded rockwool

covered from inside the canopy by perforated sheet with 3/4 mm holes, sound level not more than 75 dB at a distance of 1 mtr, as

per PVCT norms.DG set should have in built fuel tank capacity of minimum 8 hrs of continous running capacity on full load . Erection,

commissioning and satisfactory testing as per requirement with first filling of fuel (minimum up to the 80% of fuel tank capacity), oil,

etc. with guarantee / Warrantee of complete system for Two years. & with obtaining all necessary certificate from Electrical

Inspector. The Capacity and Ratings of DG sets are as below. (As per new CPCB4+ Emission norms Engine With - Turbo Charger, EGR

(Exhaust Gas Recirculation), CRS (Common Rail Fuel System), DOC (Diesel Oxidation Catalyst), SCR (Selective Catalytic Reduction),

Integrated wiring harness connected to ECU).

1.1 (M) Continuous rating of 125 KVA ,BHP not less than 154 BHP Ea ₹ 10,19,004.00 4 ₹

1.2 (O) Continuous rating of 160 KVA ,BHP not less than 197 BHP Ea ₹ 13,82,776.00 7 ₹

Providing & erecting approved make ATS panel suitable for following size of 3 phase, 415 V., 50 cycles, A.C. diesel generating set

complete of scope as detailed below:

2 1) Power module: Motorised Changeover switch with ATS controller, Auxiliary contactor with NO & NC contacts with Automatic

Battery Charger, indicating lamps for Generator ON, Mains ON, Load and suitable control terminals and power terminals with

neutral earthing studs.

2.1 (C) ATS Control Panel for100 KVA/125 KVA3 phase DG Set Nos ₹ 72,035.00 4 ₹

2.2 (F) ATS Panel for 160 KVA 3 phase DG Set Nos ₹ 81,357.00 7 ₹

ELECTRICAL PANELS ACCESSORIES & SWITCH GEARS

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated outdoor type double door cubical panel

board necessary IP-54 and above protection as per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for

outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of

engineer-in-charge with erection of supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper wire / copper-

aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuring instruments, earth bus & earth bolts, foundation

flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy duty end

terminal connection,danger notice board,necessary ventilation,earthing strip complete. The Panel shall be painted with epoxy

powder coating. (The rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper Aluminium strips, meters,

Fuses etc. The dimension shall be measured excluding base beams) The panel shall be supplied with following approved

manufacturers with following size.(B) The standard companies switch gear shall be used and only manufacturers at CPRI approved

factory (i) with 350mm depth

Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper size of M.S. angles,square,round,

4 flats, bars, channels, sections complete with cutting, welding, grinding & finishing duly painted with one coat of red oxide with kG ₹ 77.00 935 ₹

erection on site as per direction of engineer in charge with necessary grouting, cementing, plastering & finishing complete.

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. and above at

415 V . having normal current rating 250A. with variable thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all

internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only

Cat III ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V.

6 having Normal current rating 200A.with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal Ea ₹ 16,061.00 4 ₹

connections, spreader tinned copper & complete erected in existing 16 G.M.S.housing ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 25 KA. at

7 V,having normal current rating up to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. Ea ₹ 6,112.00 30 ₹

with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V.

8 having normal current rating 125A. with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal Ea ₹ 7,976.00 7 ₹

connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III

ELECTRICAL PANELS ACCESSORIES

Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having

current density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for

phase sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to

each busbar,erected in existing cubical panel with necessary connections. (C) Suitable for 300 Amp. Capacity

9.1 (A) Suitable for 100 Amp. Capacity Rn.Mtr ₹ 654.00 20 ₹

Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage, minimum 15000 burning hours life, 500 V in

built-surge protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser suitable LAMP holder

10.1 (ii) 5 to 8 watts

Cat-III Ea ₹ 111.00 11 ₹

11 Operational Handle Assembly Complete for

12 Cable Terminal ( ‘Plain" Type)Set of Four for

Supplying & erecting power contactor ,AC3 duty for time switch complete erected as per direction Cat III

Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and operate battery backup 1 channel

day clock with 14 memory programme, suitable to operate on 240V + 5%, 16A with, floating contacts Minimum switching setup time

1 minimum & LCD display. Also comprised permanent ON/OFF switching. Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover erected as required with necessary connection erected as directed.

Providing and erecting Approved make Earth fault Relay suitable to mount with inter connection suitable to following size of

moulded case circuit breaker having CT ratio & MCCB rating as following along with shunt trip 220V AC. with all internal connections

& complete erected in existing M.S.housing..

Providing & erecting Medium Voltage Danger Notice Board sticker as per language suggested by engineer incharge of standard size

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat

17 resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays,

power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required.

17.1 (b) One wire 1.50 sq. mm Mtr. ₹ 17.00 50 ₹

17.2 (c) One wire 2.50 sq. mm Mtr. ₹ 27.00 50 ₹

18 providng and erecting Suitable set of CTS for 100A Energy Meter Ea. ₹ 2,085.00 11 ₹

Supplying and erecting approved make suitable panel indicator LED type lamp, lens cover, complete erected with necessary

20 TOGGLE SWITCH Ea. ₹ 115.00 11 ₹

21 THERMOSTATE HEATER Ea. ₹ 100.00 11 ₹

Supplying & erecting approved make Four Pole 415V change over switch interior for panel mounting with operating mechanism

22 A.C.23 duty confirming to IS for (C)100-125A -CAT - iii Ea. ₹ 7,713.00 11 ₹

Providing and erecting multifunctional meter suitable for application of Power monitoring and showing measurement of following

Voltage, Frequency, Apparent energy, Apparent power, Active and reactive energy, Active and reactive power, Average voltage

Vavg, Peak demand power PM, QM, SM, Demand power P, Q, S, Apparent power S, S1, S2, S3, Unbalance current, Power factor and

displacement PF (signed, four quadrant), Calculated neutral current, Active, reactive, apparent energy (signed, four quadrant), Active

power P, P1, P2, P3, Voltage U21, U32, U13, V1, V2, V3, Phase currents, Average current Iag, Peak demand currents, Reactive power

Q, Q1, Q2, Q3, Demand current I1, I2, I3, [Us] rated supply voltage 40...300 V AC 45...65 Hz, 40...300 V DC, Network frequency 50 Hz,

Type of network 3P, Display type 7 segments LED, Display colour Red, Messages display capacity 3 fields of 4 characters, Display

digits 12 digit(s) - 14.2 mm in height

Supplying rubber matting of following thickness as per IS:15652/IEC

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of cables (J) 3 1/2 core 300 Sq.mm ( 150 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of cables (G) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core)

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary

27 connecting accessories of same material at required depth in existing trench for laying of cable. below ground / road surface for

enclosing cable

27.1 (A)50 mm outer dia Mtr. ₹ 62.00 300 ₹

27.2 (B)63mm outer dia Mtr. ₹ 73.00 250 ₹

Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below ground across the road crossing or on floor with necessary

material in an approved manner and making the ground as per original.(C) 300 mm dia

Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The cable tray should be single or double

bended as per required and as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with max 17.5%

perforation with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erection with necessary support(

included) as per Specification and as per instruction of engineer in charge..(2) 100 X 50 X 1.6 mm Thick

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault all over the run and back filling the

same and making the surface as normal ground.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for laying any size of cable or locating the

fault all over the run and back filling the same and making the surface as normal ground.

Supplying FIRE bucket round bottom of 9 litres capacity made out of 24 gauge G.I. sheet with extra handle at bottom duly painted

white inside and Red out side with FIRE mark, filled with dry-sand and kept on existing stand provided or hung on wall hook.

Supplying and erecting floor mounting stand for keeping four nos. of FIRE buckets comprising 1500 mm in length, 900 mm height

33 frame made out of 30mm X30 mm X 4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one Ea. ₹ 933.00 11 ₹

coat of red lead and two coats of approved enamelled silver paint.

Supply, installation, testing, and commissioning of a manual, self-priming fuel transfer pump. The pump should be suitable for diesel

fuel and capable of transferring fuel from a drum or storage tank to the DG set's day tank. Capacity: 50 to 100 liters per hour.

Supply, testing, and delivery of a digital insulation resistance tester (megger) for measuring insulation resistance of electrical cables,

motors, and equipment. The instrument must be battery-operated, robust, and suitable for field use. oltage Range: Selectable test

35 voltages of 500V DC and 1000V DC. Resistance Range: Measures insulation resistance up to 2000 MΩ. Display: Large, clear LCD Ea. ₹ 15,000.00 11 ₹

display with a backlight. Features: Auto-ranging, data hold function, and a low battery indicator. Safety: Overload protection and a

safety warning feature for live circuits. Accessories: Test leads, crocodile clips, and a carrying case.

Supply, testing, and delivery of a versatile digital clamp meter for measuring AC current, AC/DC voltage, and resistance. The

instrument should be compact, ergonomic, and suitable for a wide range of electrical testing applications. AC Current: Measures up

36 to 600A AC. Voltage: Measures up to 600V AC/DC. Resistance: Measures up to 20 MΩ. Display: 3.5 digit or 4 digit LCD display with Ea. ₹ 15,000.00 11 ₹

data hold and continuity buzzer. Features: True RMS for accurate readings on non-sinusoidal waveforms, auto-power off, and a low

battery indicator. Safety: IEC 61010-1 rated for safety. Accessories: Test leads and a carrying pouch.

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails, insulating tape etc for following size of cables.(I) 3 & 1/2 core 300 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails, insulating tape etc for following size of cables.(F) 3 & 1/2 core 150 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool

& connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (K) 300 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool

& connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (H) 150 Sq.mm. .

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool

& connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (E) 70 Sq.mm.

42 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. KG ₹ 787.00 65 ₹

43 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. KG ₹ 77.00 100 ₹

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board,

Motors etc. using proper clamp.

Providing and erecting required size Copper strip for earthing of H.T. OCB / ACB/ Transformer, LT panel board, Motors etc. using

SITC of 14.2 mm dia 3 mtr long Earth electrode of High tensile steel electrode with 250 micron copper bonding & 1 bag of Carbon fill

Based environment friendly backfill tested as per IEC 62561-7 in NABL accredited Laboratory and suitable stainless Steel double

sided clamp. Eco Friendly rust proof heavy duty weather proof Polyethylene Earth Pit Chamber with following dimensions :254 mm

dia (top), 330 mm dia (bottom) & 260 mm (height).

Charges for doing liasioning work for obtaining the necessary clearances from the Electrical inspector and competent Authorities and

Local Power Supply Authorities for the total Electrical installation, coordinating with various agencies. All necessary drawings,

calculations, test certificates, etc. as required by these authorities shall be prepared and furnished by the EPC Vendor.the job

incuding taking proces for power connection and get electrical inspector NOC and submit to all detials AMC officer.

Total Amount of SITC OF DG SETS AND ELECTRIFICATION WORK (PART-A)in Rs. ₹

Total Amount of SITC OF DG SETS AND ELECTRIFICATION WORK (PART-A)in Rs. ₹

Name of work : SITC of New DG SET and related Electrical work with 04 years CMC (after 01 Year DLP) and 05 Years Operation at Various Community Health Centers of Ahmedabad Municipal Corporation.

PART- B - COMPREHENSIVE MAINTAINANCE CHARGES FOR FIVE (05) YEARS INCLUDING DLP PERIOD

SR NO Description QTY Unit Per unit rate Total Rate Per Year Rate

Charges for Comprehensive maintenance service Contract for First Year as per detail technical specifications

1 1 Per Year 0.00 0.00

mentioned in Vol-I

Charges for Comprehensive maintenance service Contract for Second Year as per detail technical

specifications mentioned in Vol-I

Charges for Comprehensive maintenance service Contract for Third Year as per detail technical specifications

mentioned in Vol-I

Charges for Comprehensive maintenance service Contract for Forth year as per detail technical specifications

mentioned in Vol-I

Charges for Comprehensive maintenance service Contract for Fifth Year as per detail technical specifications

mentioned in Vol-I

Total Amount of CMC for 05 years including DLP(PART-B) in Rs. ₹

Total Amount of CMC for 05 years including DLP(PART-B) in Rs. ₹

PART- C - MANPOWER FOR OPERATION FOR FIVE (05) YEARS INCLUDING DLP PERIOD

SR NO Description QTY Unit Per unit rate Total Rate Per Year Rate

Rate for Providing Senior Technician(skilled) as per detail qualification mention in Vol-I technical

1 specification (Genral Shift 09:00 AM to 05:00 PM 6 Day per Week or EIC Instructions ) for 1st year The 2.00 ₹ 19,415.79 ₹ 38,831.59 ₹

Biometric attendance or as per latest AMC norms attendance sheet should required.

Rate for Providing Senior Technician(skilled) per detail qualification mention in Vol-I technical specification

2 (Genral Shift 09:00 AM to 05:00 PM 6 Day per Week or EIC Instructions ) for 2nd year The Biometric 2.00 ₹ 20,386.58 ₹ 40,773.17 ₹

attendance or as per latest AMC norms attendance sheet should required.

Rate for Providing Senior Technician(skilled) as per detail qualification mention in Vol-I technical

3 specification (Genral Shift 09:00 AM to 05:00 PM 6 Day per Week or EIC Instructions ) for 3rd Year The 2.00 ₹ 21,405.91 ₹ 42,811.82 ₹

Biometric attendance or as per latest AMC norms attendance sheet should required.

Rate for Providing Senior Technician(skilled) as per detail qualification mention in Vol-I technical

4 specification (Genral Shift 09:00 AM to 05:00 PM 6 Day per Week or EIC Instructions ) for4th Year The 2.00 ₹ 22,476.21 ₹ 44,952.41 ₹

Biometric attendance or as per latest AMC norms attendance sheet should required.

Rate for Providing Senior Technician(skilled) as per detail qualification mention in Vol-I technical

5 specification (Genral Shift 09:00 AM to 05:00 PM 6 Day per Week or EIC Instructions ) for 5th Year The 2.00 ₹ 23,600.02 ₹ 47,200.04 ₹

Biometric attendance or as per latest AMC norms attendance sheet should required.

Total Amount of manpower for Operation for 05 years including DLP(PART-C)in Rs. ₹

Total Amount of manpower for Operation for 05 years including DLP(PART-C)in Rs. ₹

PART D- ARC OF ELECTRICALS ITEMS

Providing and erecting Sheet Steel powder coated Vertical MCB distribution board (VTPN) - flush / surface mounted double door

(IP54) fitted with insulated copper busbar, isolated neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986,IP-

54 suitable for 63/100 AMP TPN MCCB + RCCB as incomer and three phase outgoing as per following .(The DBs should be used of

same company of MCB to be used)

(C)8 way outgoing Ea. ₹ 13,688.00 20 ₹

(D)12 way outgoing Ea. ₹ 18,480.00 25 ₹

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand

49 capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic component. for following Max. rating erected as directed

(ii) 40Amps. DP

(iii) 63 Amps. DP

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS

:8828 in existing box having following capacity

(b) for 63 Amp. Cat. III Ea. ₹ 709.00 50 ₹

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat. III

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of pipe to be erected concealed in/ on surface on wall/ceiling complete with

6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic box, single

mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

Point wiring for Modular secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires, in below type of pipe to be erected complete with earth continuity and

53 necessary connection with primary light with accessories erected on Metal / PVC / wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as

f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete - Note:- Maximum up to 6 mtrs

length, excess will be considered as Mains for Secondary Point.

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic box, single mounting base frame

covered with textured / metallic front plate modules erected on / in wall / ceiling with following type accessories. CAT III

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / ceiling as per

pipe erected with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Pt ₹ 505.00 55 ₹

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Pt ₹ 738.00 55 ₹

Providing & erecting Switch board for Computer or electric apparatus consisting of following items in single board erected on PVC

/ Metal board with 3 mm thick PC (Polycarbonate) / Acrylic sheet erected as directed for [B] modular type accessories

56 1 no. 6A/16A universal plug-switch combined. CATIII Ea ₹ 1,122.00 55 ₹

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

57 Providing & erecting following type of Modular Type Accessories with necessary connection. As desired by Engineer In charge

(1) 6 Amp. SP one way switch Ea ₹ 27.00 55 ₹

(2) 16 Amp. SP one way switch Ea ₹ 51.00 45 ₹

(3) 6/16Amp. Universal socket Ea ₹ 82.00 45 ₹

(4) 6 A socket Ea ₹ 42.00 45 ₹

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected

58 with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of

59 pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size

(A) With medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm Mtr. ₹ 62.00 200 ₹

(c) 3 wire 1.5 sq. mm Mtr. ₹ 82.00 200 ₹

LIGHTING FIXTURES :

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above assembled on

single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC

line supply with over-voltage protection.

(v) above 120 to 160 watts CAT-III Ea. ₹ 8,370.00 33 ₹

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-voltage protection.

(iii) Above 60 to 90 watts CAT-III Ea. ₹ 5,917.00 33 ₹

(iv) above 90 to 120 watts CAT-III Ea. ₹ 6,501.00 33 ₹

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used

as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

(v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet CAT- III Ea. ₹ 530.00 33 ₹

Providing Aluminium arm bracket of having 2 sets of suitable SS304 hardware for fixing the brackets & spread of 1.2 Mtr (Suitable

for 89 to 114 mm pole top dia) (A) Single arm bracket

Total Amount of ARC OF ELECTRICALS ITEMS (PART-D) in Rs. ₹

Total Amount of ARC OF ELECTRICALS ITEMS (PART-D) in Rs. ₹

Name of work : SITC of New DG SET and related Electrical work with 04 years CMC (after 01 Year DLP) and 05 Years Operation at Various

Community Health Centers of Ahmedabad Municipal Corporation..

PART -E CIVILWORK

SOR R&B AHEMDABAD 23-24

Sr.No Discription Qty. Unit Rate Amount without GST

Excavation for foundation from 3.0 mt. to 5.0 mt.. depth including

1 sorting out and stacking of useful materials and disposing of the 275.00 Cum ₹ 142.52 ₹

excavated stuff up to 50 meter lead. (A) Loose or soft soil

Filling available excavated Earth (Excluding Rock) in trench

plinthside of foundation etc.in layer not exceeding 20 cm in depth

consolidation each deposited layer by ramming and waterring etc.

P & L cement concrete 1:5:10 (1 cement : 5 Coarse sand : 10 hand

3 broken stone aggregates 40mm nomianl size) & curing comp. Excl. 330.00 Cum ₹ 2,481.58 ₹

Cost of formwork in (A) foundation & plinth (upto 10 ton)

Brick work using common burnt clay building bricks having crushing

strenght not less than 35 Kg/Sq.cm. in foundation & plinth in

cement mortar 1:6 (1 cement: 6 fine sand) (B) conventional (upto

Providing and laying cement concrete 1:2:4 (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm nominal size) and curing

5 etc complete excluding cost of form work & reinforcement for 275.00 Cum ₹ 3,962.77 ₹

reinforced concrete work in (B) Slabs, landings, shelves, balconies,

lintels, beams, girders and cantilever upto floor two level.

Providing TMT Bar FE 500/500D reinforcement for R.C.C. Work incl.

Bending, binding & placing in position comp.

Providing 20 mm thick double coat mala cement plaster on interior

brick / concrete work for plastering comprising of base coat of

mm thick cement plaster in cement mortar (1 Cement : 4 coarse

sand) in rough finishing and 8 mm thick top coat of cement mortar

1:2 (1 Cement : 2 Coarse sand) finished with trovel including

scaffolding curing etc. complete.Item Code :- 17003A

Filling in plinth with sand under floors including watering, ramming,

8 consolidating and dressing etc. complete. (SOR Ch. 4, Item 220.00 Cum ₹ 460.19 ₹

Filling foundation and plinth with brickbats / chhara in layers of

9 cm. thickness including watering, ramming and consolidation etc. 330.00 Cum ₹ 600.56 ₹

complete. (SOR Ch. 4, Item No.04009A)

Providing & fixing M.S. grills of required pattern to wooden frames

of windows etc. with M.S. flats at required spacing & frame around,

square or round bars with round headed bolts & nuts or by screws

(A) Plain grill.

Providing and fixing chain link fencing with M.S. Angle posts

mm. X 40 mm. X 5 mm. And oil painting 3 coats fixed at 1.40 mt.

11 G.I. chainlink Jali strained and fixed to Angle with MS flat 25 x 3 220.00 Nos ₹ 2,495.71 ₹

mm with weld, including fixing posts on brick work with Fittings etc.

White washing with lime on wall surface(Three coats) to give even

12 shade incl. Thoroughly booming the surface to remove all dirt, dust, 550.00 Sqm ₹ 18.14 ₹

mortar drops & other foreign matter.

Making trench in Hard soil (RCC/CC ) of suitable minimum width of

90 cm deep or more for laying cable or locating the fault all over

the run and back filling the same and making the surface as normal

Removing Existing paver Block/ kota/RCC/Road or any florring or

any kind of work

Drilling the road without breaking the road surface (Asphalt) for

15 laying of cable for feeding power supply by making up to following 550.00 Mtr. ₹ 492.88 ₹

size of holes at both ends complete.(A) Up to 100 mm bore dia

Providing and fixing 1.20 Metre high fencing with 2.0 Metre long

M.S. Angle posts 40mm x 40 mm x6 mm and oil painting 3 coats

fixed at 2.5 Mt,C/c. with five Horizontan lines and two diagonals of

16 galvanised steel barbed wire weighting 9.38 Kg. per 100 Metre, 495.00 SqM ₹ 389.25 ₹

strained and fixed to posts with G.I,staples including fixing the

postsin ground with 0.5 M x 0.5.M x 0.5 M. block in C.C1:5:10 etc

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in proper line and level as

per guidlines of IRC : SP 63-2018 etc. Complete.

Providing and fixing pre-cast concrete kerb stone of gray cement

based concrete block 30cm length,30cm height and 15cm thick of

18 M250 grade concret as per approved design and including 550.00 Rmt ₹ 361.64 ₹

excavation for fixing in proper line and level,filling the joint with

C:M 1:3 (1cement:3fine sand) etc complete.

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing strength

not less than 35Kg/ Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total weight of cover

with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt.

19 of frame 15Kg. (R.C.C. top slabe with 1:2:4 mix (1-cement :2coarse 33.00 Each ₹ 7,180.44 ₹

sand :4-graded stone aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and bed

concrete etc. complete.(iii) Inside dimensions 600mm x 850 mm

and 450mm deep for pipe lines with three or more inlets.

Providing corrugated G.I. sheet of class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8mm diameter with

20 bitumen and G.I. limpet washer or G.I. limpet washer. filled with 275.00 SqM ₹ 727.13 ₹

white lead complete excluding the cost of purlins, Rafters and

Trusses.(1) 0.80 mm thick sheet.

MS Fabrication work with one coat of primer and two coat of

synthetic enamel colour painting like extra pole as per design,

bracket or any other fabrication work as per the design proposed

by AMC. & Steel work, welded in built up sections framed work

including cutting, hoisting, fixing in position and applying a priming

coat of red lead paint. in Box Pipes, flats,plates with connecting

plates or angle cleats as in main and cross beams. Hip and jack

rafters, purlins conneted to common rafters and the like

Total Amount of Civil Work(PART-E) in Rs. ₹

Total Amount of Civil Work(PART-E) in Rs. ₹