Extension of parking shed at FA shop inside factory area at OFMK

Amount

Dismantling structural steel work including doors, gates but excluding framed truss etc.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

Surface excavation not exceeding 30 cm deep and averaging 20 cm deep in hard / dense soil and getting out. Complete all as specified and directed

Excavation over areas not exceeding 1.5m depth in hard/dense soils and getting out. Complete all as specified and directed

Excavating in trenches in hard/dense soils, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sq m on plan and n exc. 1.5 m in depth and getting out. Complete all as specified and directed

Excavating in trenches in hard rocks, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sq m on plan and n exc. 1.5 m in depth and getting out. Complete all as specified and directed

Demolition of Reinforced cememnt concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level). complete all as specifioed and directed.

Removing excavated material(soils) exc. 500m but n.exc 1500m and depositing where directed.

Moorum filling in floors or pavings laid in layers not exe. 15cm thick , spread leveled and rammed including watering. Complete all as specified and directed

Hard core with broken stone/ boulders of gauge not exc. 63mm, deposited, spread leveled in layers not exceeding 15 cm thick, and watered consolidated to required gradient & camber including watering. Complete all as specified and directed.

PCC paving : PCC 1:4:8 in floors/ paving of type D-2, 1:4:8 with 40mm graded aggregate, 100 mm thick. Complete all as specified and directed.

Stone sett flooring (M&L) with stone setts of size 200 to 250mm long, 150 to 200mm wide and 150mm deep and sides dressed; bedded in cement mortar 1:3, joints 20mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush. Complete all as specified and directed.

Edge stones to flooring (M&L) with stone setts of size 250 to 300mm long x l50 to 200mm wide, and 450mm deep and and sides dressed; bedded in cement mortar 1:3, joints 20mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush. Complete all as specified and directed.

PCC paving : PCC 1:2:4 in floors/ paving of type B-2, with 40mm graded aggregate, 100 mm thick. Including finishing concrete surface even and smooth surface without using extra cement. Complete all as specified and directed.

Forming 12mm thick Expansion joints for 100 thick slabs filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A. ’ Complete all as specified and directed.

Wearproof topping 20 mm thick using CC 1:2:4, as specified incorporating an approved metallic floor hardner), laid on concrete floors and pavings, and finished even and smooth (except metallic hardner). Complete all as specified and directed.

Supply of metalic floor hardener

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter. Complete in all respects as specified and directed.

PCC : Plain Cement Concrete (1:4:8) Type D-2 using 40 mm graded aggregate in foundations, floors, filling and mass concrete, Complete all as specified and directed .

Stone Masonry : Walling of Squared Rubble regular coursed Stone masonry, well bonded, bedded and solidly hearted built in with 1:6 cement mortar, Complete in all respects as specified and directed.

PCC : Plain Cement Concrete (1:2:4) Type B-2 using 40 mm graded aggregate in foundations, floors, filling and mass concrete, Complete all as specified and directed .

Structural steel (S&F) : Structural steel work Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Steel confirming to Fe410W (Gde E-250 quality A). Make : TATA, Jindal, Complete all as specified directed.

Structural steel (S&F) : Structural steel work Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars,stiffeners, gusset plates, etc. Steel confirming to Fe410W (Gde E-250 quality A). Make : TATA, Jindal, Complete all as specified directed.

Structural steel (S&F) : Mild steel bolts. purpose made. of dia. of neck n.exc. 12 mm with hexagonal orsquare head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long. Complete all as specified directed.

SY.ENAMEL PAINTING (STEEL) (M&L) : Synthetic enamel painting two coats on new steel surfaces of any description not otherwise described over 10cm width or girth - including preparation of surfaces and application of one coat red oxide primer.

Roofing sheet : Supply and fixing of pre painted galvalume aluminium zinc coating GI based corrugated/ trapezoidal profile roofing sheets of thickness 0.5 mm having tensile strength of 550Mpa as in roof covering / cladding to wall with self tapping screws etc. Make : TATA / Jindal /Essar. Complete all as specified and directed.

P LAVAKUSHA REDDY CONTRACTORS (BID ID -734884)

gurudev infra projects limited (BID ID -735360)

SATYANARAYANA RAJU VEGESNA (BID ID -734280)