Loading
Loading…
Loading…
Tender Value
₹4.0 Cr
EMD Value
₹8.0 L
Closing Date
9 Apr 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
WORKS
16 conditions · 4 needing a document upload
Financial Eligibility Criteria:- The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB , along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
All rates are inclusive of GST and bidders should be registered in GST.
Technical Eligibility Criteria:(a) The tenderer must have successfully completed or substantially completed (Which should have been issued not prior to 60 days of date of invitation of present tender) any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Similar Nature of work:- "Any Civil Engineering Work."
12 conditions · 8 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / HUF etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be.(Para 14.1 (see Page-17 of GCC, April-2022) & Tenderer shall submit the documents in support of their constitution of the firm as per Para 14 of GCC, April-2022 (See Page-17 to 19).
As per instructions please attach proforma of ANNEXURE V-A this certificate is to be given by attorney/authorized signatory/each member of partnership firm / Joint Venture (JV)/ Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.) Non submission of above certificate (s) by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent up on the tenderer to identify, state and submit the supporting documents duly self-attested / digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document. Proforma is available in uploaded documents.
Certificate of Information regarding Employment/Partnership etc. of Retired Railway Employees with the tender as per the attached Performa. As per clause No 16 (a) and (b) of GCC Part-I April 2022 corrected up to date. (As per Para 16 of GCC, April2022 (See Page-19 to 20).
Restrictions on the Employment of Retired Engineers of Railway Services Within One Year of their Retirement: As per Para 59.9, of GCC, April-2022 (see Page-91).
Certificate of NO Relative being an employee of Western Railway as per attached Performa.
The tenderer should upload the scan copy of EPFO and ESI registration number. However EPFO and ESI registration would be mandatory and documents towards EPFO and ESI registration must be submitted before execution of the agreement.
In case of Bid Security in the form of Bank Guarantee, the same should be in favor of Sr. DFM Vadodara with the tender for due performance with the stipulation to keep the offer open till such date as specified in the tender, under condition of tender. (GCC April 2022 Part I Instructions to tenderers (ITT) para 5 Bid Security (1) (a,b,c),(2) (3)(i-viii). As per ACS 2 issued vide Rly. Board letter No.2022/CEI/ CT/GCC-2022/Policy date 13.12.2022: (ii) The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days before closing date for submission of bids. As pr ACS 5 RB No. 2022/CE-I/CT/GCC-2022/Policy date 20.10.2023:- Para 5(3) II The original bank guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bid.(i.e. excluding the last date of submission of bids).
The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected. As par Para 15 of GCC, April-2022 (see Page-19).
Maintenance period for the work is "6 Months" from the certified date of the completion.
Vadodara Division:- Improvement of community hall/Institute at Vadodara Yard (02 Nos), Godhra, Nadiad and Bharuch.
DRM-BRC-209-OF-2025-26
DRM-BRC-209-OF-2025-26
Open
Works - General
12 Months
Vadodara, Gujarat
₹0
₹8.0 L
9 Apr 2026
18 Mar 2026
26 Mar 2026
152 items across 4 schedules · ₹5,84,05,136.86 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | Sqm | 85 | 129.85 | 11,037.25 |
| 2 | All kinds of soil. | cum | 150 | 260.3 | 39,045 |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum | 150 | 196 | 29,400 |
| 4 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | cum | 290 | 700.5 | 2,03,145 |
| 5 | All kinds of soil | cum | 50 | 126.8 | 6,340 |
| 6 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 160 | 2,123.75 | 3,39,800 |
| 7 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 95 | 7,878.5 | 7,48,457.5 |
| 8 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 28 | 7,780.3 | 2,17,848.4 |
| 9 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 55 | 7,294.7 | 4,01,208.5 |
| 10 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources). | Sqm | 2600 | 495.75 | 12,88,950 |
| 11 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 135 | 10,852.95 | 14,65,148.25 |
| 12 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 170 | 392.15 | 66,665.5 |
| 13 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. | Sqm | 78 | 842.5 | 65,715 |
| 14 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 75 | 927.25 | 69,543.75 |
| 15 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm | 75 | 736.4 | 55,230 |
| 16 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 50 | 961.3 | 48,065 |
| 17 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 19 | 10,585.9 | 2,01,132.1 |
| 18 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 2450 | 107.85 | 2,64,232.5 |
| 19 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 20600 | 107.85 | 22,21,710 |
| 20 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 52 | 9,504.75 | 4,94,247 |
| 21 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 79 | 9,860.4 | 7,78,971.6 |
| 22 | Add for using extra cement in the items of design mix over and above the specified cement content therein. | Quintal | 168 | 733.5 | 1,23,228 |
| 23 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 55 | 7,132.25 | 3,92,273.75 |
| 24 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 25 | 9,095.05 | 2,27,376.25 |
| 25 | Cement mortar 1:6 (1 cement : 6 Coarse sand) | cum | 95 | 8,752.55 | 8,31,492.25 |
| 26 | Area of slab upto 0.50 sqm | Sqm | 75 | 5,413.5 | 4,06,012.5 |
| 27 | Area of slab over 0.50 sqm | Sqm | 90 | 5,136.3 | 4,62,267 |
| 28 | Area of slab upto 0.50 sqm | Sqm | 54 | 4,170.7 | 2,25,217.8 |
| 29 | Area of slab over 0.50 sqm | Sqm | 20 | 3,848.7 | 76,974 |
| 30 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 220 | 1,267.95 | 2,78,949 |
| 31 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including:(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metallic colour of approved shades made out of 4 mm thick aluminium composite panel material consisting of 3 mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5 mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF /Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminium Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. | Sqm | 45 | 5,015.05 | 2,25,677.25 |
| 32 | Second class teak wood | cum | 1 | 1,42,949.7 | 1,42,949.7 |
| 33 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 40 | 2,392.65 | 95,706 |
| 34 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 75 | 2,172.1 | 1,62,907.5 |
| 35 | On one side only | Sqm | 80 | 478 | 38,240 |
| 36 | 25 mm dia | Metre | 20 | 525.55 | 10,511 |
| 37 | 300x16 mm | Each | 10 | 216.55 | 2,165.5 |
| 38 | 200x10 mm | Each | 10 | 69.4 | 694 |
| 39 | 300x20x6 mm | Each | 10 | 98.35 | 983.5 |
| 40 | 100x75x4 mm | Each | 60 | 115.4 | 6,924 |
| 41 | 250x16 mm | Each | 30 | 260.6 | 7,818 |
| 42 | 250x10 mm | Each | 30 | 115.15 | 3,454.5 |
| 43 | Single rubber stopper | Each | 10 | 39.6 | 396 |
| 44 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. | Metre | 45 | 570.95 | 25,692.75 |
| 45 | 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. | Sqm | 15 | 3,720.75 | 55,811.25 |
| 46 | 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. | Sqm | 33 | 4,488.95 | 1,48,135.35 |
| 47 | Using R2 series with frame (70 mm & above) x (40 mm & above) & both glazed and fly screen sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 metre). | Sqm | 55 | 10,993.55 | 6,04,645.25 |
| 48 | Using R2 series with frame (39mm & above ) x (39mm & above) & sash /mullion (39mm & above) x (60mm & above). (Height upto 1.2 meter) | Sqm | 30 | 12,254.9 | 3,67,647 |
| 49 | Using R3 series with frame (55mm & above ) x (45mm & above) & sash /mullion (55mm & above) x (65mm & above). (Height above 1.2 meter) | Sqm | 30 | 11,919.85 | 3,57,595.5 |
| 50 | 125 mm | Each | 20 | 119.2 | 2,384 |
| 51 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 1700 | 117.35 | 1,99,495 |
| 52 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 29600 | 133.7 | 39,57,520 |
| 53 | Hot finished welded type tubes | Kg | 17000 | 194.4 | 33,04,800 |
| 54 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Kg | 1665 | 772.4 | 12,86,046 |
| 55 | Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete. | cum | 12 | 8,595.15 | 1,03,141.8 |
| 56 | Ordinary cement without any pigment | Sqm | 600 | 1,056.35 | 6,33,810 |
| 57 | 25 mm thick | Sqm | 680 | 1,948.25 | 13,24,810 |
| 58 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | Sqm | 40 | 1,096.55 | 43,862 |
| 59 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 150 | 1,112.7 | 1,66,905 |
| 60 | Size of Tile 600x600 mm | Sqm | 850 | 1,553.45 | 13,20,432.5 |
| 61 | Size of Tile 800x800 mm | Sqm | 2250 | 1,885.5 | 42,42,375 |
| 62 | Size of Tile 800x800 mm | Sqm | 2250 | 244.75 | 5,50,687.5 |
| 63 | Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. | Sqm | 2250 | -13.3 | -29,925 |
| 64 | 1.60 mm thick with zinc coating not less than 350 gm/m2 | Metre | 90 | 1,863.9 | 1,67,751 |
| 65 | Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871)roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required. | Sqm | 400 | 536.4 | 2,14,560 |
| 66 | Extra for providing and fixing wind ties of 40x 6 mm flat iron section. | Metre | 960 | 195.6 | 1,87,776 |
| 67 | Corrugated serrated adjustable ridges | Metre | 60 | 522.95 | 31,377 |
| 68 | 6 mm thick Cement fiber board, Type-B, Category-III as per IS: 14862 : 2000 | Sqm | 675 | 921.95 | 6,22,316.25 |
| 69 | 110 mm diameter | Metre | 360 | 377.4 | 1,35,864 |
| 70 | 110x110x110 mm | Each | 15 | 234.15 | 3,512.25 |
| 71 | 110 mm bend | Each | 60 | 150.35 | 9,021 |
| 72 | 110 mm Shoe | Each | 60 | 131.85 | 7,911 |
| 73 | 110 mm | Each | 150 | 371.3 | 55,695 |
| 74 | 2 mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6" ) as specified | Sqm | 21 | 1,401.35 | 29,428.35 |
| 75 | 2 mm thick flat | Sqm | 115 | 1,245.65 | 1,43,249.75 |
| 76 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 3465 | 738.65 | 25,59,422.25 |
| 77 | Ridges plain (500 - 600mm) | Metre | 50 | 532.35 | 26,617.5 |
| 78 | 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. | Sqm | 2600 | 2,215.15 | 57,59,390 |
| 79 | 1:6 (1 cement: 6 fine sand) | Sqm | 2500 | 333.35 | 8,33,375 |
| 80 | 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge. | Sqm | 2100 | 537.45 | 11,28,645 |
| 81 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 3000 | 262.7 | 7,88,100 |
| 82 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | Sqm | 4000 | 193.7 | 7,74,800 |
| 83 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture | Sqm | 1500 | 176.25 | 2,64,375 |
| 84 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture | Sqm | 1500 | 170.7 | 2,56,050 |
| 85 | Two or more coats on new work | Sqm | 200 | 155.9 | 31,180 |
| 86 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | Sqm | 2000 | 156.05 | 3,12,100 |
| 87 | Old work (one or more coats) | Sqm | 3045 | 62.7 | 1,90,921.5 |
| 88 | Two coats | Sqm | 1200 | 137.45 | 1,64,940 |
| 89 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 180 | 2,434.25 | 4,38,165 |
| 90 | Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) | cum | 40 | 1,503.6 | 60,144 |
| 91 | In cement mortar | cum | 185 | 2,060.2 | 3,81,137 |
| 92 | Of area 3 sq. metres and below | Each | 45 | 143.5 | 6,457.5 |
| 93 | Channels, angles, tees and flats | Kg | 9000 | 2.3 | 20,700 |
| 94 | For thickness of tiles 10 mm to 25 mm | Sqm | 3200 | 73.4 | 2,34,880 |
| 95 | G.S. Sheet | Sqm | 3000 | 164.95 | 4,94,850 |
| 96 | Asbestos Cement sheet | Sqm | 511 | 77.3 | 39,500.3 |
| 97 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | Sqm | 1500 | 54.65 | 81,975 |
| 98 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. | Sqm | 300 | 56.35 | 16,905 |
| 99 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 1150 | 263.95 | 3,03,542.5 |
| 100 | For 50 mm compacted thickness using coarse aggregate of size 50-20 mm graded @ 0.60 cum per 10 sqm key aggregate of size 12.5 mm graded @ 0.15 cum per 10 sqm. With paving asphalt grade VG - 10 @ 50 kg/ 10 sqm. | Sqm | 950 | 505.65 | 4,80,367.5 |
| 101 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete. | cum | 38 | 7,993.8 | 3,03,764.4 |
| 102 | Cement concrete prepared with batch mixing machine | cum | 60 | 10,529.35 | 6,31,761 |
| 103 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in- charge). | cum | 45 | 10,117.6 | 4,55,292 |
| 104 | Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in- charge. (The panel shuttering work shall be paid for separately). | cum | 50 | 9,823.8 | 4,91,190 |
| 105 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 12 | 6,767.4 | 81,208.8 |
| 106 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 9 | 6,515.55 | 58,639.95 |
| 107 | One urinal basin with 5 litre white P.V.C. automatic flushing cistern | Each | 9 | 6,258.75 | 56,328.75 |
| 108 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap | Each | 4 | 2,226.35 | 8,905.4 |
| 109 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps | Each | 15 | 2,301.75 | 34,526.25 |
| 110 | 610x510 mm bowl depth 200 mm | Each | 2 | 4,940.8 | 9,881.6 |
| 111 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. | Each | 2 | 2,784.95 | 5,569.9 |
| 112 | Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous china W.C pan and cistern. | Each | 2 | 170.7 | 341.4 |
| 113 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. | Each | 4 | 1,648.95 | 6,595.8 |
| 114 | 32 mm dia | Each | 6 | 103.9 | 623.4 |
| 115 | Rectangular shape 1500x450 mm | Each | 4 | 2,093 | 8,372 |
| 116 | 25 mm nominal dia Pipes | Metre | 140 | 401.55 | 56,217 |
| 117 | 20 mm nominal dia Pipes | Metre | 150 | 537.6 | 80,640 |
| 118 | 25 mm nominal dia Pipes | Metre | 150 | 627.25 | 94,087.5 |
| 119 | 15 mm nominal dia Pipes | Metre | 105 | 244.7 | 25,693.5 |
| 120 | 20 mm nominal dia Pipes | Metre | 150 | 274.3 | 41,145 |
| 121 | 25 mm nominal dia Pipes | Metre | 411 | 355.4 | 1,46,069.4 |
| 122 | 50 mm nominal dia Pipes | Metre | 335 | 794.25 | 2,66,073.75 |
| 123 | 25 mm nominal bore | Each | 30 | 622.4 | 18,672 |
| 124 | 50 mm nominal bore | Each | 6 | 1,026.65 | 6,159.9 |
| 125 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Per Litre | 11000 | 11 | 1,21,000 |
| 126 | 15 mm nominal bore | Each | 10 | 506.8 | 5,068 |
| 127 | 15 mm nominal bore | Each | 4 | 820.7 | 3,282.8 |
| 128 | 15 mm nominal bore | Each | 6 | 798.95 | 4,793.7 |
| 129 | 15 mm nominal bore | Each | 34 | 670.45 | 22,795.3 |
| 130 | 15mm nominal bore | Each | 12 | 574.3 | 6,891.6 |
| 131 | 150 mm dia. R.C.C. pipe | Metre | 298 | 556.45 | 1,65,822.1 |
| 132 | 300 mm dia. R.C.C. pipe | Metre | 220 | 994.3 | 2,18,746 |
| 133 | Rectangular shape 600x450 mm internal dimensions | Each | 6 | 1,437.65 | 8,625.9 |
| 134 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 1050 | 495.05 | 5,19,802.5 |
| 135 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 670 | 530.9 | 3,55,703 |
| 136 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 280 | 598.6 | 1,67,608 |
| 137 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | Sqm | 115 | 1,176.8 | 1,35,332 |
| 138 | P r o v id in g and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric water proofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric water proofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in- Charge. | Sqm | 525 | 563.1 | 2,95,627.5 |
| 139 | Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge. | Each | 15 | 1,399.95 | 20,999.25 |
| 140 | With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles | Sqm | 715 | 2,630.4 | 18,80,736 |
| 141 | With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles | Sqm | 500 | 3,117.6 | 15,58,800 |
| 142 | Non load bearing panels 60 mm thick of required size | Sqm | 200 | 1,487.5 | 2,97,500 |
| 143 | Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. | Sqm | 300 | 829.75 | 2,48,925 |
| 144 | Frame size 45 x 85 mm | Metre | 71 | 926.35 | 65,770.85 |
| 145 | 30 mm thick | Sqm | 28 | 4,764.2 | 1,33,397.6 |
| Schedule total | ₹5,77,85,968.2 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Annexure-F.pdf
ATTACHMENT
JPOSTDepartment.pdf
ATTACHMENT
PCECircular88forQualityofWorks.pdf
ATTACHMENT
IRSGCCApril-2022.pdf
ATTACHMENT
AdvancecorrectionslipNo01to11GCCApril2022.pdf
ATTACHMENT
ImplementationofContractore-MB.pdf
ATTACHMENT
Annexure-VIB.pdf
ATTACHMENT
DRMBRC209of2025-26C.pdf
ATTACHMENT
209SpecialCondition.pdf
ATTACHMENT
Dainikkaaryanishpaadananumatipatra.pdf
ATTACHMENT
PCECircular87.pdf
ATTACHMENT
Recommendedmakermanufacturerofcivilmaterials1.pdf Special Condition 04
ATTACHMENT
Recommendedmakermanufacturerofcivilmaterials1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .