To Supply, Commissioning and Delivery of 20-nos. suitable chassis Mounted Jetting Machines small capacity (3000 Litre) for Vadodara Municipal Corporation

Name of Work: Supply, Commissioning and Delivery of 20-nos. suitable chassis

Mounted Jetting Machines 3000-ltrs capacity for Vadodara Municipal Corporation

Executive Engineer

Mechanical Department, VMC

Vadodara Municipal Corporation,

Khanderao Market Building, Rajmahal Road, Vadodara-390209

Email: [email protected]

Signature of the issuing officer:

Executive Engineer

Mechanical Department, VMC

Tender Documents 2 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

Vadodara Municipal Corporation has prepared this Request for Proposals for “Supply,

Commissioning and Delivery of 20-nos. suitable chassis Mounted Jetting Machines

3000-ltrs capacity for Vadodara Municipal Corporation‖

The information contained in this Request for Proposal document (hereafter referred as the

―RFP‖) or subsequently provided to Bidder(s), whether verbally or in documentary or any

other form by or on behalf of the Authority or any of its employees or advisors, is provided to

Bidder(s) on the terms and conditions set out in this RFP and such other terms and

conditions subject to which such information is provided.

This RFP is not an agreement and is neither an offer nor invitation by the Authority to the

prospective Bidder(s) or any other person. The purpose of this RFP is to provide interested

parties with information that may be useful to them in submitting Bids pursuant to this RFP.

This RFP includes statements, which reflect various assumptions and assessments arrived

at by the Authority in relation to the Project. Such assumptions, assessments and

statements do not purport to contain all the information that each Bidder may require. This

RFP may not be appropriate for all persons, and it is not possible for the Authority, its

employees or advisors to consider the investment objectives, financial situation and

particular needs of each party who reads or uses this RFP. The assumptions, assessments,

statements and information contained in the Bidding Documents may not be complete,

accurate, adequate or correct. Each Bidder should, therefore, conduct its own investigations

and analysis and should check the accuracy, adequacy, correctness, reliability and

completeness of the assumptions, assessments, statements and information contained in

this RFP and obtain independent advice from appropriate sources.

Information provided in this RFP to the Bidder(s) is on a wide range of matters, some of

which may depend upon interpretation of law. The information given is not intended to be an

exhaustive account of statutory requirements and should not be regarded as a complete or

authoritative statement of law. The Authority accepts no responsibility for the accuracy or

otherwise for any interpretation or opinion on law expressed herein.

The Authority, its employees and advisors make no representation or warranty and shall

have no liability to any person, including any Bidder under any law, statute, rules or

regulations or tort, principles of restitution or unjust enrichment or otherwise for any loss,

damages, cost or expense which may arise from or be incurred or suffered on account of

anything contained in this RFP or otherwise, including the accuracy, adequacy, correctness,

completeness or reliability of the RFP and any assessment, assumption, statement or

information contained therein or deemed to form part of this RFP or arising in any way for

participation in this Bid Stage.

Tender Documents 3 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

The Authority also accepts no liability of any nature whether resulting from negligence or

otherwise howsoever caused arising from reliance of any Bidder upon the statements

contained in this RFP.

The Authority may in its absolute discretion, but without being under any obligation to do so,

update, amend or supplement the information, assessment or assumptions contained in this

The issue of this RFP does not imply that the Authority is bound to select a Bidder or to

appoint the Selected Bidder for the Project and the Authority reserves the right to reject all or

any of the Bidders or Bids without assigning any reason and without any financial

implications to VMC whatsoever.

The Bidder shall bear all its costs associated with or relating to the preparation and

submission of its Bid including but not limited to preparation, copying, postage, delivery fees,

expenses associated with any demonstrations or presentations which may be required by

the Authority or any other costs incurred in connection with or relating to its Bid. All such

costs and expenses will remain with the Bidder and the Authority shall not be liable in any

manner whatsoever for the same or for any other costs or other expenses incurred by a

Bidder in preparation or submission of the Bid, regardless of the conduct or outcome of the

Bidding Process.

Executive Engineer, Mechanical

Vadodara Municipal Corporation

Mechanical department, Room No.

Khanderao Market Building, Rajmahal Road,

Vadodara-390209

Email: [email protected]

Tender Documents 4 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

1. Vadodara Municipal Corporation invites detailed bid from interested parties for

“Supply, Commissioning and Delivery of 20-nos. suitable chassis Mounted

Jetting Machines 3000-ltrs capacity for Vadodara Municipal Corporation”.

2. Online tenders, for the above work are invited from the Bidders. The Bidder should

have experience of manufacturing and supply of chassis mounted Jetting machines

in last three years. Bid Document can be obtained from the website

www.nprocure.com.

3. Hard copy of Tender fees, EMD and other detail as required shall be submitted to

Executive Engineer, Mechanical Department, Vadodara Municipal Corporation,

Room no.132 Khanderao Market Building, Rajmahal Road, Vadodara,-390001 by

registered post/speed post only on or before Date:14/10/2026. These envelopes

shall than be sealed in a single outer envelope and clearly mark as:

Tender For “Supply, Commissioning and Delivery of 20-nos. suitable chassis

Mounted Jetting Machines 3000-ltrs capacity for Vadodara Municipal

4. The Bidder should note that VMC shall consider the documents in supporting to

tender bid submitted by the Bidder in electronic format only through online (by

scanning etc.) and submission of such documents in hard copy only will not be

accepted separately.

GENERAL DETAILS OF WORKS

Name of Work Particulars Description

Supply, Commissioning Tender Issuing Department Executive Engineer

and Delivery of 20-nos. (Mechanical), Mechanical

suitable chassis Mounted Department, Vadodara

Jetting Machines 3000- Municipal Corporation

ltrs capacity for

Vadodara Municipal Estimated Tender Value Rs.

Tender Fee (Non-refundable) Rs.

Earnest Money Deposit Rs.

Starting date of Downloading 28/09/2026

online Tender Document

Last date of online 12/10/2026 upto 16:00 hrs.

submission of Tender

Hard copy of Tender Fees, 14/10/2026 up to 16:00 hrs.

Tender Documents 5 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

Name of Work Particulars Description

EMD and other detail as Through R.P.A.D./Speed post

required shall be submitted only,

on or before Address:

Executive Engineer,

Mechanical Department,

Vadodara Municipal

Corporation, Room no.132

Khanderao Market Building,

Rajmahal Road, Vadodara,-

DOWNLOAD OF TENDER DOCUMENT

The tender document for these work are available on website www.nprocure.com. The

Bidder shall pay the Tender Fee by way of Demand Draft issued by any Nationalized Bank

or Scheduled Bank as per list mentioned in GR of Finance Department, GR. No.:

EMD/10/2018/18/DMO, Date: 16.04.2018, in favour of Municipal Commissioner,

Vadodara payable at Vadodara and shall be attached with the Pre-qualification Document.

PRE-BID CLARIFICATIONS

No pre-bid meeting has been scheduled for this tender. However, the Bidders may submit

pre-bid queries to [email protected] 7 days of RFP issuance date in the

following format:

Sr. RFP Document Reference(s) Content of RFP Points of

No. (Section and Page No.) requiring clarification(s) clarification

VMC shall not be responsible for ensuring that the Bidders‘ queries have been received by it

within the stipulated time. Any requests for clarifications after the indicated date and time

may not be entertained by VMC. VMC shall endeavour to provide timely response to all

queries. However, VMC makes no representation or warranty as to the completeness or

accuracy of any response nor does it undertake to answer all the queries that have been

posed by the Bidders.

At any time prior to the last date for receipt of bids, may, for any reason, whether at its own

initiative or in response to a clarification requested by a prospective Bidder, modify the RFP

Document by a corrigendum. The Corrigendum (if any) & clarifications to the queries from all

Bidders will be posted on www.nprocure.comonly. Any such corrigendum shall be deemed to

be incorporated in to this RFP. In order to provide prospective Bidders reasonable time for

taking the corrigendum into account, VMC may, at its discretion, extend the last date

for the receipt of Proposals.

Tender Documents 6 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

EARNEST MONEY DEPOSIT

The aforesaid BID must be accompanied by the EARNEST MONEY DEPOSIT as specified

in ‗General Details of Work‘ section above. The Bid Security shall be in form of a crossed

demand draft to be issued in favour of “Municipal Commissioner, Vadodara” of any

Nationalised bank or Scheduled Bank as per list mentioned in GR of Finance Department,

GR. No.: EMD/10/2018/18/DMO, Date: 16.04.2018 and payable at Vadodara.

OPENING OF TENDER

The online Technical bid will be opened as mentioned in ‗General Detail of Work‘ Section

above. Price Bids of only those Bidders will be opened, who are successful in the

qualification Criteria and the Technical Evaluation. The date for price bid opening shall be

informed to the technically qualified Bidders at a later date.

GENERAL INSTRUCTIONS

1. The cost of Bid document i.e. Tender fees will not be refunded under any

2. EMD in the form specified in Bid document only shall be accepted.

3. The offer shall be valid for 180 days from the last date of online submission of the

4. Tender offers without tender fees, Earnest Money Deposit (EMD) and which do not

fulfil all or any of the condition or submitted incomplete in any respect or conditional

offer will be rejected.

5. Conditional tender shall not be accepted and shall be liable for rejection.

6. The successful Bidder shall enter in to an Agreement with the VMC on Rs. 300/- non-

judicial Stamp Paper. Any stamp duty charges shall be to Bidder‘s account.

7. Bidders shall submit P.F., NSIC, PAN, GSTIN Regi., IT Return, for last three financial

years, etc. along with tender document.

8. Vadodara Municipal Corporation. (VMC) reserves the right to accept or reject any or

all tenders without assigning any reason thereof and any financial implications to

VMC. This Tender notice as well as short tender notice shall form a part of contract

9. The Bidders are advised to read carefully the ―Instructions to Bidders‖ and

―Qualification Criteria‖ contained in the tender documents.

Tender Documents 7 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

INSTRUCTIONS TO BIDDERS

Vadodara Municipal Corporation (VMC) invites tender for ―Supply, Commissioning and

Delivery of 20-nos. suitable chassis Mounted Jetting Machines 3000-ltrs capacity for

Vadodara Municipal Corporation‖

1.0 The Jetting Machine to be procured under this tender comprises of which the

detailed technical specifications are set out in Appendix 1. Interested and

qualified parties, based on qualification criteria set out in Appendix 2, are

requested to submit detail technical proposal and information about Bidder

and give financial bid in a manner prescribed in Appendix 4 as per the tender

document uploaded online on website www.nprocure.com.

2.0 The Bidder may be an individual, proprietary firm, firm in partnership, Limited

Company, Corporation applying to become eligible to tender.

3.0 Each Bidder shall submit only one (1) Bid, in response to this Tender Document. Any

Bidder who submits more than one Bid will be disqualified.

4.0 At any time prior to 48 hours of the last date and time of online submission of Bids

VMC may, for any reason, whether at its own initiative or in response to clarifications

requested by any Bidder, modify the tender by issuance of Addenda. All interested

Bidder shall have to check the www.nprocure.com. The Bidder shall not transfer the

TENDER document to another interested party.

5.0 The Bid shall remain valid for a period not less than 180 days from the date of online

submission of tender (Bid Validity Period). VMC reserves the right to reject any Bid,

which does not meet this requirement.

In exceptional circumstances, prior to expiry of the original Bid Validity Period, VMC

may request Bidders to extend the Bid Validity Period for a specified additional

period. Bidders not extending the Bid Validity Period when so requested would

automatically be disqualified.

6.0 Earnest Money Deposit (EMD)

6.1 Each Bid shall be accompanied by DD of EMD amount.

6.2 The EMD shall be in the form of a crossed demand draft/Pay Order in favour of

MUNICIPAL COMMISSIONER of Vadodara Municipal Corporation issued by

any nationalized bank or Scheduled Bank as per list mentioned in GR of

Finance Department, GR. No.: EMD/10/2018/18/DMO, Date: 16.04.2018,

payable at Vadodara.

6.3 The EMD of all the unsuccessful Bidders, except two lowest Bidders would be

returned within a period of eight (8) weeks from the date of announcement of

the successful Bidder. EMD of the second lowest Bidder would be returned

within a period of four (4) weeks from the signing of the contract with the

successful Bidder.

6.4 The EMD shall be forfeited in the following cases:

(a) If the Bidder withdraws its Bid during the interval between the Bid Due

Date and expiration of the Bid Validity Period.

Tender Documents 8 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

(b) If the successful Bidder fails to provide the Security Deposit within the

stipulated time or any extension thereof provided by VMC.

7.0 Format and Signing of Bid

7.1 The Bidder would provide all the information as per this Tender Document.

VMC would evaluate only those Bids that are received in the required format

and are complete in all respects. Each Bid shall comprise the following:

(a) Detailed technical proposal as per details required in tender doc.,

describing detail technical specification.

(b) Details of the Bidder in the format set out in Appendix

(c) The Bidder shall submit Experience Certificates in the format Appendix

& 8 and other documents in support of meeting the Pre-Qualification

Criteria as set out in Appendix

(d) Financial Bid shall be submitted online only as per format set out in

(e) Tender fee in the form of D.D. as stated above in favour of Municipal

Commissioner, Vadodara payable at Vadodara as evidencing purchase of

the Tender Document along with qualification documents.

(f) The successful Bidder shall have to duly sign all the sheets of the Tender

Document issued by the VMC in original or downloaded from the VMC

website immediately after issuance of the Letter of Award by VMC.

(g) EMD should be submitted as prescribed in Clause 7 above.

7.2 The bid shall be typed or written in indelible ink and each page shall be initialled

by an authorised signatory of the Bidder or an Individual, as applicable. All the

alterations, omissions, additions, or any other amendments made to the

Quotation shall also is initialled by the person(s) signing the Bid.

7.3 Bidder has to submit all the relevant information like:

(a) Warranty conditions

(b) Detailed client list to which such type of vehicles have been supplied by

(c) Details of Technical experience of the Bidder.

(d) Make & model of chassis with all technical details.

(e) Drawings and data sheet in Appendix 6 of the proposed equipment‘s.

(f) The list of Fast moving and maintenance spare parts along with original

technical brochures, parts catalogues, details of all standard and

specialized tools and equipment required for equipment maintenance

(g) ARAI/CMVR certificate for compliance of latest BS Norms for chassis.

(h) Innovative Features in the Jetting machines

(i) Work orders, Performance certificates issued by the clients, etc.

Tender Documents 9 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

8.0 Sealing and Marking of Bid

8.1 The outer envelope must be super-scribed with the following information:

(a) Name of work and pro no.

(b) Name and Address of Bidder

(c) Contact person and phone numbers

8.2 If the envelope is not sealed and marked as instructed above, VMC assumes

no responsibility for the misplacement or premature opening of the contents of

the Bid submitted and such Bid, may, at the sole discretion of VMC, be

8.3 The envelope shall be addressed to:

ATTN. OF: Office of Executive Engineer (Mechanical)

ADDRESS: Room No. 132, Mechanical department, Vadodara Municipal

Corporation, Khanderao Market Building, Rajmahal Road, Vadodara –

And submitted through R.P.A.D. / speed post only

Email: [email protected]

9.0 Bid Due Date

9.1 Online Bids should be submitted before the time and hour specified in the

―General Description of Work‖ in the manner and form as detailed in this Tender

Document. Bid submitted by either facsimile transmission or email or in person

will not be accepted

9.2 VMC may, in exceptional circumstances, and at its sole discretion, extend the

above Bid Due Date by issuing an Addendum.

10.0 Opening of Bids and Clarifications

10.1 Online opening of Bids shall mostly be done on Bid Due Date as mentioned

above in the ‗General Description of Work‘ for the purpose of evaluation.

10.2 VMC reserves the right to reject any Bid not submitted on time and which does

not contain the information / documents as set out in Clause

10.3 To facilitate evaluation of Bids, VMC may, at its sole discretion, seek

clarifications in writing from any Bidder regarding its Bid.

11.0 Evaluation

11.1 As part of the evaluation, the Bids shall be checked for responsiveness with the

requirements of the Tender Document and only those Bids which are found to

be responsive would be further evaluated in accordance with the criteria set out

in this Tender Document.

11.2 The Bid would be considered to be responsive if it meets the following

Tender Documents 10 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

(a) It is received /deemed to be received by the Bid Due Date including any

extension thereof.

(b) It is signed, sealed and marked as stipulated in Clause 8 and Clause

(c) It contains all the information and documents as requested in the Tender

(d) It contains information in formats specified in this Tender Document.

(e) It mentions the validity period as set out in Clause

(f) It provides information in reasonable detail. (―Reasonable Detail‖ means

that, but for minor deviations, the information can be reviewed and

evaluated by VMC without communication with the Bidder). VMC reserves

the right to determine whether the information has been provided in

reasonable detail.

(g) There are no inconsistencies between the Bid and the supporting

A Bid that is substantially responsive is one that conforms to the preceding

requirements without material deviation or reservation. A material deviation or

reservation is one:

i. Which affects in any substantial way, the scope, quality, or performance of

the project, or

ii. Which would affect unfairly the competitive position of other Bidders

presenting substantially responsive Bids

11.3 VMC reserves the right to reject any Bid, if:

(a) If the tender is incomplete; or

(b) At any time, a material misrepresentation is made or discovered; or

(c) The Bidder does not respond promptly and diligently to requests for

supplemental information required for the evaluation of the Bid.

11.4 In case the Bid is found to be responsive, the Bid would be evaluated in

accordance with the Qualification Criteria as set out in Appendix

11.5 In case the Bid is found to be inadequate, VMC may request the Bidder to

provide additional information as may be required by VMC. As part of the

evaluation of the Bid, VMC may also request the Bidder to submit clarifications.

11.6 The Financial Quotations of only those Bidders, who meet the Qualification

Criteria, would be opened.

11.7 The Bidder offering the lowest quotation as per the evaluation formula for the

tendered work would be declared as the Preferred Bidder for the same.

11.8 VMC may either choose to accept the Price Bid of the Preferred Bidder or invite

him for further negotiations.

11.9 In case there are two or more Bidders quoting the same price, VMC may in

such case call all such Bidders for sealed negotiations and select the Preferred

Tender Documents 11 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

Bidder on the outcome of the results from the sealed negotiations. The

selection in such cases shall be at the sole discretion of VMC.

12.0 The decision of lowest rate will be on the basis of sum of rates quoted

13.0 In the event of acceptance of the Preferred Bidder with or without negotiations, VMC

shall declare the Preferred Bidder as the Successful Bidder. VMC will notify the

Successful Bidder through a Letter of Award (LoA) that its Bid has been accepted.

14.0 No Price variation clause shall be applicable.

15.0 The technical specification for Truck chassis mounted Jetting Machine 3000-ltrs

capacity is given in Tender Doc., however Bidder are advise to personally visit

designated locations / site in Vadodara City, for better understanding of requirement

The approved Bidder shall be deemed to have carefully examined the total work;

conditions, specifications, size, make and drawings, scope of work, etc. of the goods

to be supplied.

16.0 VMC will do necessary and required testing of material or any part of entire system, if

required, from government approved laboratory, as per instruction of Engineer in

Charge for the same and cost of the testing will be borne by the Bidder.

17.0 Entire System shall be inspected / verified by VMC with the specification of VMC on

successful supply, delivery, testing & commissioning and operational capabilities of

18.0 The Bidder can contact for more information and details regarding tender to the

Office of the Executive Engineer, Mechanical Department, Vadodara Municipal

Corporation, Vadodara-360209. Mobile: 098258 01942; 098258

19.0 Conditional offer will not be accepted and same will be treated as non-responsive.

HOD, Mechanical dept. VMC reserves the right to accept or reject such tenders

without assigning any reason there of and without any financial implications to VMC.

20.0 The Bidder has to furnish the undertaking on the non-judicial stamp paper of

Rs.300/-duly Notarized regarding his firm is not blacklisted in anywhere in India

as on date of at the time of e-tendering. The information should be accurate and the

coverage of this undertaking should also include cases which are sub-judice and/or

under litigation. This undertaking should be submitted online as well as during the

physical submission of Qualification documents.

This should also include such cases, which are in process/progress. The Bidder

should provide accurate information on any litigation history or arbitration resulting

from contracts completed or under execution by them over the last ten years.

Any Bidders are not eligible to participate who has been blacklisted (including

cases which are sub-judice and/or under litigation) by any of Govt. Department or

any ULB‘s (Urban Local Bodies in India). If it comes to the notice of the VMC

authority at any point of time, during the tendering or execution stage of the work that

the Bidder has been blacklisted by any Govt. Organization (as mentioned above),

then all the payments due to him shall be forfeited and firm will be blacklisted.

Tender Documents 12 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

A consistent history of awards against the Bidder may result in failure of the bid. In

case the Bidder has not provided such information and has come to the notice of the

Authority the tender will be rejected at whatsoever stage and in such case all the

losses that will arise out of this issue will be recovered from the Bidder/Contractor

and he will not have any defence for the same.

21.0 No price preference will be given to SSI units or Khadi Gramudhyog Units.

22.0 e-Technical Bid will be opened online as per milestone dates and after evaluation of

e-Technical Bid, e-Price Bid will be opened only of those Bidders who will be

qualified in e-Technical Bid evaluation. Date of opening of e-Price bid will be

intimated only to those Bidders who will be qualified in e-technical bid evaluation.

23.0 Tender fees will not be refunded under any circumstances.

24.0 EMD in the form specified in Technical Bid only shall be accepted.

25.0 Tender offers without tender fees, Earnest Money Deposit (EMD) and which do not

fulfil all or any of the condition or submitted incomplete in any respect will be rejected.

26.0 Bidder shall submit necessary registration certificate like GST number registration

copy & any other if required for execution of such work as per government rules

along with tender document.

27.0 Security Deposit

The successful Bidder would be required to submit Security Deposit amounting to 3%

of the value of the Total Order in the form of a crossed demand draft issued in favour

of Municipal Commissioner, Vadodara Municipal Corporation issued from any

nationalized bank or Scheduled Bank as per list mentioned in GR of Finance

Department, GR. No.: EMD/10/2018/18/DMO, Date: 16.04.2018, payable at

Vadodara. Security should be valid till Warranty Period.

28.0 Performance Security

The successful Bidder would be required to submit Performance Security amounting

to 5% of the value of the Total Order in the form of an Irrevocable Bank Guarantee

issued by a Nationalized bank or Scheduled Bank issued in favour of Municipal

Commissioner, Vadodara as per list mentioned in GR of Finance Department, GR.

No.: EMD/10/2018/18/DMO, Date: 16.04.2018 located in India in VMC format (refer

Appendix 5) shall also be acceptable.

29.0 Agreement:

The successful Bidder shall be required to enter into an agreement for due

performance of the contract. The stamp duty on all documents to be executed in

connection with this contract to be entered into shall be borne by the Bidder.

If the Bidder fails to submit the agreement deed in the stipulated time limit, the

E.M.D. for this contract will be forfeited and the Bidder will be black listed for this

30.0 Bidder’s responsibility

While every effort has been made to provide comprehensive and accurate

background information and requirements and specifications, however Bidders

Tender Documents 13 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

should form their own conclusions about the methodology/ solution needed to meet

the requirements.

All information supplied by Bidders may be treated as contractually binding on the

Bidders, on successful award of the assignment by the VMC on the basis of this

No commitment of any kind, contractual or otherwise shall exist unless and until a

formal written contract has been executed by or on behalf of VMC. Any notification

of preferred Bidder status by VMC shall not give rise to any enforceable rights

by the Bidder. The VMC may cancel this public procurement at any time prior to a

formal written contract being executed by or on behalf of the VMC.

This RFP supersedes and replaces any previous public documentation &

communications, and Bidders should place no reliance on such communications.

The Financial Assessment for the Project are being provided only as a preliminary

reference document by way of assistance to the Bidders who are expected to carry

out their own surveys, investigations and other detailed examination before

submitting their Bids.

Notwithstanding anything to the contrary contained in this RFP, the detailed terms

specified in the draft Contract shall have overriding effect; provided, however, that

any conditions or obligations imposed on the Bidder hereunder shall continue to have

effect in addition to its obligations under the Contract.

The Bidder should submit a Power of Attorney authorizing the signatory of the

Proposal to commit the Bidder.

Tender Documents 14 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

GENERAL TERMS AND CONDITIONS

1. SUPPLY AND DELIVERY SCHEDULE

The selected Bidders have to ensure that supply and commissioning work for the

equipments should be completed within 120-Days from the date of issuance of the Work

Order. Equipment will be delivered at the designated location as informed by VMC at

Vadodara, as per specification required and the Bidder shall intimate department of VMC of

the schedule of inspection at least 20 days prior to scheduled delivery date. Supply period

120 days, inclusive of all inspection procedure, rectification of any suggestion during

inspection etc. So it is advisable to call for third party inspection at least 20 days prior to

schedule delivery day. After intimation for inspection the TPI will be done within 15 days.

More time taken in TPI not calculated for late delivery.

As per requirement VMC will give delivery schedule (if delivery required in staggered

manner/delay) to the successful Bidder. The price quoted as per Price Bid, will be valid for

the entire procurement period, which will be binding to the Bidder and no price variation shall

be entertained.

Delivery location: Office of the Vehicle Pool Department, Vadodara Municipal

Corporation, Near Bhutadi Zapa, Fatehpura, Vadodara - 390006, Gujarat at site

specified by VMC

2. INSURANCE, TRANSPORTATION, TAXES & RTO FORMALITIES:

Bidder has to quote the total price, net including of all taxes, GST & duties etc. and for

evaluation and finalization purpose, the total price will be taken in to consideration.

Transportation, Packing, Forwarding, Transit & Comprehensive Insurance and Registration

charges are included in the indicated price.

 The Bidder is solely responsible for transit and all other insurances till the completed

units are delivered at the delivery location. The Scope & liabilities of bidder will be

continues till the machines would receive by consignee.

 Bidder must make their own arrangements to obtain import license if necessary.

 The Bidder shall be responsible for transit insurance including third party insurance

and all liabilities till receipt of the units at the premises of VMC and pay for RTO

passing related charge. The Bidder shall be responsible for Registration of the

vehicle as per VMC‘s instruction and all the charges shall be to Bidder‘s account.

 A prototype certificate has to be produced by the manufacturer so that machine can

be registered with the local transport authority at the Bidder's cost.

For the Supplied Equipment Submission of all relevant documents like; TPI reports,

Registration Book, comprehensive insurance, all taxes, RTO Formalities, etc. at Office of the

Vehicle Pool Department, Vadodara Municipal Corporation, Near Bhutadi Zapa, Fatehpura,

The Bidder shall provide coverage for all items against transits risk, Accident to acquisition,

Transport delivery up to destination and accident in trial and testing.

However, the Bidder has to submit all necessary valid documents as per the requirements of

local RTO, VADODARA and have to cooperate at their level best to get the vehicle

registered in time. If RTO will not register vehicles due to design and/or other problem, same

will be rejected by VMC.

Tender Documents 15 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

4. INSPECTION, TESTING & DOCUMENTATION

Equipment inspection shall be carried out by authorized representative of VMC as per the

terms specified in Tender.

The duly authorized representative of VMC or Third Party Inspection Agency shall at all

reasonable time have access to the Bidders premises and shall have the power at all

reasonable time to inspect and examine the materials and workmanship of the equipment/

machineries during manufacturing process or afterwards as may be decided.

The Bidder shall furnish complete address of premises of his office, warehouse and

workshop where inspection can be made together with name and address of the person who

is to be contacted for the purpose.

The Biddershall make arrangement including lodging, boarding, Transportation for inspection

of the equipment by Third Party along-with VMC Official, before delivery, at factory site as

required. Inspection of the equipments will also be carried out at Vadodara at delivery sites

specified by VMC. If any discrepancy is found in the material supplied and technical

specifications approved, the same lot shall be rejected and Bidder will collect rejected

material within seven days. No claim for the rejected material shall be entertained. All the

inspection charges shall be to Bidder‘s account.

An authenticated test certificate in confirmation to the specifications of the tender for which

testing at site is not possible has to be produced by the Bidder. The Bidder have to furnish

all Drawings and Certificates and Xerox copies of bills of materials those are required and

demanded by Engineer-in-charge of VMC/ VMC or Third Party Inspecting Agency.

Articles not approved during inspection or testing shall be rejected and will have to be

replaced by the Bidder at his own cost within the time.

5. MODIFICATION OR VARIATION

Any modification or variation or any changes in work or technical specifications done by

VMC's Engineer-in-charge or Third Party Inspecting Agency and Bidder have to follow these

changes without any dispute and argument. (No extra cost will be given for the modifications

If VMC does not purchase or issue work for any of the tender articles, work or purchases

less than the quantity indicated in the tender form, the Bidder should not be entitled for any

compensation. The indicated quantities can be increased/decreased depending upon the

VMC requirement.

6. JURISDICTION

In the event of any dispute or difference arising out of this tender / contract, the jurisdiction of

the Court shall be Vadodara (Gujarat) only. While executing the agreement, the Bidder shall

be governed at all times by all laws, regulations etc., in force in Gujarat State.

In the event of any problem, dispute or difference arising out of or under this contract, the

decision of the Chairman, VMC / Municipal Commissioner (VMC), Vadodara, will be final and

binding to the parties to this contract.

Tender Documents 16 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

8. STATUTORY VARIATIONS IN TAXES & DUTIES

The price of the equipment quoted by the Bidder will be on the basis of current taxes and

levies. If there will be any statutory change in the statutory tax / levies Govt. on the finished

products that will be to the account of consignee i.e. VMC, and same will be paid by VMC on

receipt of necessary documentary evidence from the Bidder.

9. LIQUIDATED DAMAGES

If the Bidder fails to deliver any or all of the equipment as per the delivery schedule, VMC

deduct from the contract price as liquidated damages (Late delivery penalty) calculated

on the basis of delayed days for delayed quantum (delayed work amount) of work at a

rate of 0.5% per week of delivery price which will be recovered from the Bidder without

any reference to the Bidder.. The delay shall include equipment installation (supply, testing,

transport and delivery) and commissioning within 07 days of delivery (completion of field

tests). The amount of Liquidated damages will be however subject to the maximum of 10%

of the total contract sum. Delay in excess of 120-days from the scheduled date of delivery

may be cause for termination of contract and forfeiture of all security for performance.

10. EXTENSION FOR DELAY-

If the supply is delayed by (1) Force Majeure,(2) Serious losses, damage by fire, (3) Strike,

Band, Curfew, lockdown, Rally, Heavy rains, Flood, Cyclone, Earthquake or Natural

Calamities occurs, (4) Electricity staggering, (5) Any other case, which is beyond the

control of contractor, then the Municipal Commissioner of VMC will decide period of delay

11. PAYMENTS DUE FROM CONTRACTOR

The VMC shall be entitled to recover costs, damages, or expenses for which under the

contract, the Contractor is liable to the VMC from any money due or becoming due to the

Contractor under the contract or Municipal Commissioner will have the liberty to recover the

amount from the Contractor.

12. The Contractor shall not assign or sub-let his contract any substantial part thereof to any

other agency without the written permission of Municipal Commissioner, VMC/ appropriate

authority of VMC.

13. All article supplied shall strictly conform to the specifications, trademark laid down in the

14. Any change in the constitution of the firm/association etc. shall be notified forthwith by

the Contractor in writing to the Corporation and such change shall not relieve any former

member of the firm, etc., from any liability under the Contract.

15. TRAINING OF VMC PERSONNEL

All personnel designated by VMC to be responsible for the operation and maintenance/repair

of the equipment shall be provided with practical training in the use and routine maintenance

of the equipments at Premises of VMC. The Bidder shall provide a training program of the

purchaser‘s personnel immediately after the delivery of the equipment. Apart from the above

the manufacturer trained staff of Bidder shall impart training to the nominated staff of VMC

on an annual basis.

Tender Documents 17 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

All costs for the Bidder‘s personnel involved in the training and any incidental expenses shall

be included in the Bidder‘s rate. All costs of the Purchaser‘s personnel and provision of

training shall be borne by the Bidder. At least two personnel w.r.t. each vehicle/equipment

shall be trained for operating and same numbers for maintenance/repairs. According to the

requirement VMC may change these numbers, which shall be binding to Bidder.

16. CONSUMABLE AND SPARES

The Bidder will provide separate comprehensive lists of:

 The list of Fast moving and maintenance spare parts along with original technical

brochures, parts catalogues and O&M Manual and,

 The details of all standard and specialized tools and equipment required within a

one-year service period for maintenance and repairs of the supplied equipment.

 The successful bidder shall bind to supply all items, which may reasonably be

required for repair and maintenance at least for 10 years. The undertaking for the

same have to submit with bid.

 Such lists shall include the details of the recommended items like description,

manufacture‘s catalogue number, unit price of each item, recommended quantity,

and total price, the estimated cost and time of delivery shall be provided separately in

the tender schedule, however, this will not be considered in bid evaluation.

17. Schedule of equipment and technical specifications:

 The Bidders shall complete the schedule(s) and technical specifications for the goods

and equipment to be supplied in their entirety so as to demonstrate their compliance

with the requirements of the bidding documents.

 The materials, equipment and services to be supplied under the contract shall be like

that use of such materials equipment and services shall not infringe or violate any

industrial property or intellectual property rights or claims of any third party.

The Bidder will submit drawings of the proposed equipments along with the Technical bid.

Successful Bidder will be required to submit detailed drawings of all the equipments.

19. SPECIFICATIONS AND STANDARDS

 The Bidder shall ensure that the goods and related services comply with the technical

specifications and other provisions of the contract.

 The goods and related services supplied under this contact shall conform to the

standards of the technical specifications, when no applicable standard is mentioned; the

standards shall be equivalent or superior to the official standard whose application is

appropriate to the country of origin of the goods and suitable to Indian (VADODARA)

weather conditions and usage.

 Wherever references are made in the contract to codes and standards in accordance

with which it shall be executed, the edition or the revised version of such codes and

standards shall be those specified in technical Specifications. During contract execution,

any changes in any such codes and standards shall be applied only after approval by the

Corporation and shall be treated in accordance with the conditions of contract.

Tender Documents 18 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

21. RIGHT TO ACCEPT OR REJECT TENDER

The right to accept the tender will rest with the VMC. VMC however, does not bind itself to

accept the lowest tender, and reserves to itself the authority to reject any or all the tenders

received without assigning any reason whatsoever and without any financial implications to

VMC. Tenders in which any of the particulars and prescribed information are missing or

are incomplete in any respect and/or the prescribed condition is not fulfilled are liable to

be rejected. In addition to the above, the tender will also be liable to be rejected outright if -

 The bidder proposes any alterations in the works specified or in the time allowed for

carrying out the work or any condition or correction made in any code or schedule or

specifications.

 Any of the page or pages of the initialled tender submitted with the bid is/are removed or

replaced or modified.

 All corrections, additions or pasted slips are not initialled by the Bidder.

22. PAYMENT TERMS

For Supply of equipment as per Appendix I

100% of the supply of entire equipment (Chassis mounted Jetting) within 45 days of

satisfactory delivery at our site.

To receive the payment, you must complete/submit the following:

RTO Registration: All the vehicles must be successfully registered with the RTO and

after receiving of RC Books payment will be released.

TPI Release Note: Inspection clearance certificate from the Third-Party Inspection

Commissioning: The entire system must be commissioned and tested to ensure it is in

full working condition.

Documentation: Submission of the original Invoice along with all other necessary legal

and technical documents. Contractor has to submit advance payment receipt along with

Note: Please ensure all documents are submitted correctly. Incomplete or improper

submissions may lead to delays in the payment process.

23. TAXES AND DUTIES

The quoted price should be inclusive of all taxes and duties for supplied equipments.

Transportation, Packing, Forwarding, Comprehensive Insurance, Registration charges, etc

are included in the indicated price. However any change in the GST, govt. statutory levies on

sales will be considered at actual for which Contractor will have to submit necessary

documentary proofs as required by department.

24. WARRANTY PERIOD

Bidder shall warrant that the supply against faulty materials and workmanship for Entire

Supply, Commissioning and Delivery of 20-nos. suitable chassis Mounted Jetting

Machines 3000-ltrs capacity for Vadodara Municipal Corporation for a period of

months from the date of delivery & acceptance of the equipment by VMC. The Bidder shall

Tender Documents 19 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

correct any defects covered by the warranty immediately on being notified by the Purchaser

of the occurrence of such defects.

Warranty for Chassis, Battery & other imported equipment will be as per manufacturer‘s

norms. Successful contractor would be liable for the particular said warranty.

Successful contractor have to arrange Minimum 03 or More No of Timely Schedule

Free Services with Consumable, oils, Filters, Spares Etc. under warranty period. No

Extra payment will be made by VMC under warranty period for Such Free Services

including Consumable, oils, Filters, Spares & Labour Work etc.

Bidder undertakes that the Systems shall be warranted against faulty materials and

workmanship and shall confirm as per Technical Specifications specified in Tender along

with Declaration of Free Service with Consumables during Warranty Period.

Successful contractor have to arrange to attend the complaint call within 24-hours and

resolved it. No payment will be done under warrantee period.

25. FORFEITURE OF SECURITY DEPOSIT

Security deposit in full or part may be forfeited in the following cases:-

 When any terms and conditions of the contract is breached

 When Bidder fails to make complete supply, installation, commissioning and testing of

the equipments/ machineries satisfactorily. The decision of the Municipal Commissioner,

VMC in this regard shall be final.

26. FORCE MAJEURE

Force Majeure shall mean such an Event or Circumstance or combination of Events and

Circumstances which are beyond the reasonable control of the Affected Party and which the

affected party could not have prevented by Good Industry Practice or by the exercise of

reasonable skills and care for the purpose of discharging its obligations under the Contract.

The Force Majeure will tend to have material adverse effect on the performance of such

affected party.

Following shall be the events and circumstances of Force Majeure:

Act of War (whether declared or undeclared), invasion, armed conflict or act of foreign

enemy, blockade, revolution, riots, insurrection, civil commotion, act of terrorism, or

The expropriation or Compulsory acquisition or seizure of the assets of the Contractor by

any Governmental Instrumentality, provided that this clause shall not apply where such Act

constitutes a remedy or sanction lawfully exercised as a result of a breach by the Contractor

of any Indian law or Indian Directive but excluding any change in law;

Act of Government;

Act of God, epidemic, lightning, earthquake, cyclone, whirlwind, flood, tempest, storm,

drought, lack of water or other unusual or extreme adverse weather or environmental

conditions, action of the elements, meteorites, fire or explosion to the extent generated from

the source external to the Contractor or his assets due to reasons other than, those caused

by negligence of the Parties, chemical or radioactive contamination or ionizing radiation.

Tender Documents 20 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

Procedure for Calling Force Majeure: The affected party shall notify to the other party in

writing of the occurrence of the Force Majeure as soon as reasonably practicable, and in any

event within 24 hours (Twenty Four hours) after the Affected Party knew, or ought

reasonably to have known, of its occurrence and that the Force Majeure would be likely to

have a material impact on the performance of its obligations under the Contract.

The notice shall include full particulars of the nature of Force Majeure event, the effect it is

likely to have on the Affected Party‘s performance of its obligations and the measures, which

the Affected Party is taking, or proposes to take, to alleviate the impact of the Force Majeure

Event and restore the performance of its obligations. When the affected Party is able to

resume performance of its obligations under this Contract, it shall promptly give the other

party written notice to that effect provided that in no event shall the suspension of

performance be of greater scope and of longer duration than is necessitated by Force

The rights and obligations of the Affected Party shall be suspended to the extent they are

affected by the Force Majeure. VMC shall not be liable to make any payments to the

contractor for it being affected on account of Force Majeure except for the charges specified

in the RFP which shall be payable only for a duration of not more than 15(Fifteen) days from

the date Force Majeure is declared.

VMC reserves the right to terminate the contract if the Force Majeure continues for more

than 15 (Fifteen) days at a stretch.

Notwithstanding the provisions of tender, the Bidder shall not be liable for forfeiture

of its performance security, liquidated damages or termination for default, if and to

the extent that, its delay in performance or other failure to perform its obligations

under the Contract is the result of an event of Force Majeure.

For purposes of this Clause, ―Force Majeure‖ means an event beyond the control of the

Bidder and not involving the Bidder's fault or negligence and not foreseeable. Such

events may include, but are not limited to, acts of the Purchaser either in its sovereign or

contractual capacity, wars or revolutions, fires, floods, epidemics, quarantine restrictions and

freight embargoes.

If a Force Majeure situation arises, the Bidder shall promptly notify the Purchaser in writing

of such conditions and the cause thereof. Unless otherwise directed by the Purchaser in

writing, the Bidder shall continue to perform its obligations under the Contract as far as is

reasonably practical, and shall seek all reasonable alternative means for performance not

prevented by the Force Majeure event.

27. TERMINATION OF CONTRACT

The Contract shall stand terminated at the end of the Contract period unless extended by the

VMC in writing. VMC has the right to terminate the Contract by giving prior written Notice of

at least 60-days.

28. FORECLOSURE OF CONTRACT IN FULL OR IN PART

If at any time after acceptance of the tender VMC shall decide to abandon or reduce the

scope of the works for any reasons whatsoever and hence not require the whole or any parts

of the works to be carried out, he shall inform the Contractor in writing to that effect and the

Tender Documents 21 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

Contractor shall have no claim to any payment or compensation or otherwise whatsoever, on

account of any profit or advantage which he might have derived from the execution of the

works in full but which he did not derive in consequence of the foreclosure of the whole or

part of the works.

The Contractor shall be paid at the contract rates full amount of works executed, provided

always that nothing herein contained shall be deemed to render the Contractor is liable for or

in respect of or to indemnify VMC against any compensation or damage causes by the

Excepted Risks.

Tender Documents 22 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

Scope of work and Technical specification

General requirements

The type of equipments envisaged to be covered under this tender is the Truck mounted

Jetting machines mounted on a suitable BS VI Chassis as approved by RTO. The purpose

of the equipment is to carry out de-clogging operations with the help of pressurized water jet

for the sewer lines within the city to ensure smooth flow of sewage.

TANK installed or fabricated for capacity shall be 3000 liters. The complete equipment with

tank shall be mounted on a minimum 7 Ton GVW BS-VI suitable vehicle chassis with factory

fitted side PTO & Standard Day Cabin.

 Jetting System

 Prime Mover for Jetting System

 Safety Devices for Jetting System

 Ancillaries for Jetting System

 Jetting Hose & Hose Storage

 Prime Mover for Jetting System

 Lateral Cleaning System

 Hydraulic System & Plant

 Control Panel

 Vehicle Chassis with factory fitted PTO

The engine should be heavy duty diesel operated and various hydraulic systems. It should

be easy to operate and simple to maintain and should be a high performance Jetting

operations with very low dB creating the most environment friendly solution.

Fuel tank of machine shall be see-through type and shall give at least 12 hrs endurance

Suitable cab-chassis is required to build up the hydraulically operated Jetting machines

Mounted with 3000 litres capacity Tank as per the specifications and requirements

mentioned in the tender documents.

The complete equipment with tank shall be mounted on a suitable (at least 7 MT GVW able

to carry 3000 liter sludge tank and equipment own weight) BS-VI vehicle chassis with factory

fitted side PTO & Standard Day Cabin. The acceleration, overload capability and gradability

requirements minimum engine with appropriate equipment requirements.

The chassis design shall be safe and convenient with exhaust emissions maintained at

specified levels (Bharat Stage VI subject to meeting additional requirement, if any at the time

delivery. Specific attention shall be provided at the driver‘s work area to provide pleasing and

healthy working atmosphere / conditions, minimize work load and operational fatigue through

automation and ergonomic design. The vehicle will have to comply with rules and regulations

on safety and emission regulations as may be notified by the Government for compliance on

the date of manufacture or registration of the vehicle as the case may be.

Tender Documents 23 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

The vehicle design should be such as to meet all statutory requirements applicable for such

equipments. Further, the mounted structure should meet the requirements of structural

strength, stability, deflection, vibration, and roll over protection etc. as per prescribed

The material used in the construction of truck shall be as per Bureau of Indian Standards

(BIS)/ Automotive Industry Standards (AIS) specifications. Wherever Indian standards are

not available, internationally acceptable standards may be referred/ followed. Specific

reference of compliance to be furnished along with test certificates from NABL accredited

laboratories for the specific discipline for the materials used for manufacturing of various

major and critical components and aggregates in view of performance and safety.

The vehicle shall be designed and manufactured with all applicable fire safety and exhaust

emission regulations for the vehicle including piping location, location of rubber hoses,

location of exhaust, location of catalytic converter, prescribed upholstery material, fire

retardant cables, connectors etc. These provisions shall include the use of fire retardant/low

exhaust material, fire detection systems, firewalls, etc as per statutory requirements.

Flammability requirements shall comply with the relevant IS standard.

The engine should be heavy duty diesel operated and various hydraulic systems. It should

be easy to operate and simple to maintain and should be a high performance operations with

very low dB creating the most environment friendly solution.

Engine Power and emission levels must confirm to the Central Motor Vehicle Rules

(CMVR)/AIS /any other Indian standards. In case of multiple norms, the most superior of

these is to be adopted and as applicable for the Project Area.

The truck should be capable of traveling at its normal / specified travel speed, when going

for dumping / discharge of collected material.

New Chassis with Driver cabin having capability build Jetting unit Mounted on it. The

Chassis shall be all weather resistant to withstand moist and humid environment and prevent

rusting. The Chassis shall be of standard make and type approved and must be

manufactured by reputed manufacturers like Ashok Leyland, Tata Motors, VE Commercial

Vehicles Ltd., Mahindra and Mahindra Ltd., Asia Motors Works, Volvo Eicher Motors Ltd.,

Bharat Benz, Volvo Trucks and SML ISUZU.

Chassis type must be approved by approving agency like ARAI as mentioned in CMVR

no.126. Certificate of the same need to submit

The cabin shall be provided and fitted with

 Roof Light - 02 Nos.

 Heavy duty Wiper Machine - 02 Nos. (with Arm & Blade)

 Heavy-duty Bracket type convex mirror - 02 Nos.

 Hand operated Traffic Signal - 01 Nos.

 Extra wiring wherever necessary

a. Suitable size battery box shall be provided under the attendants' seat. The bidder

shall provide the extra length of battery cable.

b. Stoplights, direction indicator lights and tail lamps shall be provided and fitted.

c. All controlling switches for lights, driver cab light and wiper machines shall be

provided on dashboard panel or near driver's seat to operate easily.

Tender Documents 24 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

d. The cabin shall be painted externally and internally of approved shade.

Pollution norms

The equipment should have best technological arrangement to ensure that the dust content

in the exhaust air, from machine is less than the existing / prevailing pollution control norms.

The equipment shall be designed, fabricated, mounted and integrated to the chassis having

Minimum EURO VI (BS-VI) norms & matching all requirements of various govt. agencies /

RTO rules/ norms & the following technical specification as the minimum requirement.

It is proposed that the vehicles should have the necessary provisions to allow GPS smart

equipments to be installed and necessary monitoring of the movements can be carried out

from the Control Centre. The actual installation of GPS smart systems shall be in the scope

of work of the Contractor.

Other features & accessories

a. Standard Spare wheel with carrier mounted on chassis and Tool Kit shall be provided

b. During Warranty period there should be no limit on Distance (km)

The system shall perform the jetting function with a high degree of efficiency, safety, stability

and reliability.

The high pressure triplex jetting pump shall be a fully variable unit with a heavy duty, positive

displacement, reciprocating triplex plunger and having a discharge capacity of minimum

LPM (±10%) at 130 bar (±10%) pressure to perform the jetting function with a high degree of

efficiency safety, stability and reliability.

Make: Pratissoli (Italy) / Myers.

Bidder has to enclose pump characteristics curves.

The high pressure jetting system shall be fitted with protective devices like filter, safety relief

valve, pressure regulating valve etc.

The pump will be fitted with a pressure regulating valve to set the pump‘s delivery pressure

at a desired value and to ensure the safety of the pump and system. A suitable water filter

shall also be incorporated into the system to protect the pump from ingress of foreign

particulate matter. Both components shall be procured from the pump manufacturer.

The pump shall be driven by the vehicle's engine with the split shaft or Side power take off.

The pump shall be suitably located on the chassis with provision for stopping the jetting

pump without stopping the prime mover.

The pump shall be equipped with pressure relief valve for safety protection and life extension

of jetting pump.

PROTECTION EQUIPMENT FOR HIGH PRESSURE PUMP:

(a) A proven safety valve will be provided to avoid developing over pressure.

(b) Pressure regulating unloaded valve will be provided for the high pressure line protecting

Tender Documents 25 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

the pump from excess pressure, particularly when operating under blocked jet condition. The

excess water will be fed back to the tank through a separate pipeline. It will be possible to

adjust pump working pressure from lower to higher pressure within it operating range by

adjusting the pressure regulating unloaded valve.

(c) A suitable water filter will be provided between the tank and high pressure pump to

prevent the sand and dirt entering in to the high pressure pump.

Preferably the Jetting pump shall be driven by the vehicle's engine. The power shall be

tapped from the suitable Power Take off (Split shaft PTO or Side PTO) which shall be

mounted between the vehicle's gear box & the differential unit. The design of PTO shall be

sturdy and suitable to transmit the power requirement for system.

Changeover of the various drives shall be made independently.

If Split shaft PTO fitted than its design shall allow to draw the full power/through the vehicle

engine & drive.

Make for Split Shaft PTO: PZB-Italy/ SKIBL Germany/ OMSI-Italy.

Output (Torque): The PTO unit shall be capable to transmit adequate torque generated by

the engine to operate the system smoothly.

PTO Output ratios: 1:1 on main shaft and 0.807:1 on auxiliary shaft.

Note: - Hand Brake should be in working mode when jetting unit of vehicle under operating

Pneumatic controls for PTO engagement and disengagement drive shaft.

Ancillaries for Jetting System

The complete system to be supplied with Air filter and vacuum relief valve in Jetting dump

Jetting Hose & Hose Storage

Suitable arrangement for storage of Jetting hose to be fitted on the side of the tank and

Nos. of non-collapsible, heavy duty Jetting hose.

Tank Construction

The tank shall have a minimum volumetric capacity of 3000 liters for fresh water and shall

preferably be elliptical in shape, with disk-type rear and front ends.

The Tank construction shall be of Mild steel plate of 6-mm thick & shall confirm to IS

grading 'A' standard.

The tank shall have a min. 2 nos. of compartment.

The tank shall be an electrically continuous welded with suitable reinforcement.

Protection Against Corrosion: The tank material and allied metal components shall be

blast cleaned to SA 2.5 Grade — Grit Blasting and the entire inside shall be painted with one

coat of inorganic Zinc Silicate Grey Primer (65-75 microns) followed by 3 coats of high build

epoxy (40 microns per coat). The outside of tank shall be blast cleaned to SA 2.5 Grade —

Grit Blasting and the entire inside shall be painted with one coat of inorganic Zinc Silicate

Tender Documents 26 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

Grey Primer (65-75 microns) followed by a coats of high build epoxy zine phosphate (40

micron) and 2 coats of synthetic enamel paints (40 micron per coat) and the same shall be

subject to verification.

The tank is mounted with Minimum 3 nos. of cradle support should be fabricated on which

entire body should be mounted by using minimum 1‖ thick high-density rubber mounting and

U-bolts with nut, lock nut and washer of SS 304 material.

The tank shall be provided with suitable arrangement of baffle plates to prevent the surge of

water when the vehicle is in motion and accelerating, braking in speed. The arrangement of

baffle plates shall be clearly shown in the drawing. The baffle shall be arranged in a manner

to facilitate the movement of the person throughout the tank for cleaning and welding

purposes. The tank shall be fitted with anti-surge baffles to provide dynamic stability to the

vehicle in motion. Tank is mounted in such a way that load will be distributed uniformly on

Minimum One machine hole of not less than 18‖ diameter should be provided with suitable

leak proof cover and locking arrangements. The tank shall be provided with the machine

hole on the top (front) to allow man entry for maintenance. The machine hole lid (cover) shall

be fully gasketed.

The ladder shall be Stainless steel (SS 304), 400 mm wide, with non-skid rungs and lateral

handles having foot rest of not less than 3 inches. The ladder shall be placed at suitable

Also, a tank breather and filler port with a cap shall be provided and fitted on the top of the

A level indicator made of thick-walled transparent acrylic tubing shall be provided on either

side of the tank with suitable protective cover, in a suitable position.

Centre of gravity of the vehicle shall be kept as low as possible under all conditions of

loading. Stability of water filled tanker including grade ability shall be ensured for safe driving

within the city. Strobe lights or Beacon lights (Flashing lights) are meant for safety warning

for common public and shall be mounted appropriately on the vehicle. Due attention should

be given to limit the speed through speed limiting device and the same shall be displayed to

the driver through stickers etc.

For ease of maintenance, suitable eyes shall be provided on the shell of water tank to

enable it to be lifted from the vehicle for repairs/replacement as and when required.

Fitting required with Tank

Sr. Qty. Size Item

1 01 2‖ dia. S.S. 304 Ball valve at the rear end of the compartment

to facilitate draining.

2 01 3‖ dia. S.S. 304 ball valve to isolate the tank from the jetting

system to facilitate the maintenance when tank is full of

The Chassis Mounted Tanker shall be designed, developed Fabricated and Painted with

standard procedure and workmanship.

Minimum 02 Years against manufacturing defects, leakages, corrosion, deformation etc.

irrespective of km.

Tender Documents 27 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

The tank to be mounted in such way that load will be distributed uniformly, on an auxiliary

frame of ISMC 150 section and to be adequately strengthens to render it torque resistant.

The auxiliary frame shall be of an all electrically welded construction.

The hose reel drum shall be driven through a imported hydraulic motor to effect the wind and

unwind operations. Make of hydraulic motor: Eaton/Parker.

The hose reel drum is sufficiently strong to take up the winding and unwinding of the high

pressure hose at the full pressure and under the pulling tension caused by jetting and friction

in the sewage line.

The matching of the winding and unwinding operation and hose reel movement to be

obtained by chain and sprocket drive operated by a hydraulic motor suitably tensioning

arrangement to be provided to take up the wear and tear of the chain sprocket drive.

The fixed type hose reel shall be fitted on the rear end of the equipment. It shall be designed

to store 120 meter of the jetting hose supplied with the machine. The high pressure of water

shall be directed in to the hose reel drum through a specially designed high quality SS

rotary swivel joint.

Make: Parker / Piranha / Trellborg / Exit Flex. (Imported)

Length: Total 120 meter continuous length fitted with machine.

ID: 19 mm (3/4 inch)

Maximum working pressure: 3000 PSI (206 Bar)

Minimum Bursting pressure: 7500 PSI (517 Bar)

Temperature limits -5 °C to 55°C

Inner core shall be constructed of a special water and grease resistant Styrene-Butadiene

Rubber Polymers (SBR) / Polyolefin thermoplastic material

REINFORCING MATERIAL: - Special synthetic textile braided.

COVER: - A smooth Styrene-Butadiene Rubber Polymers (SBR) / Natural Rubber (NR) /

Polyether urethane of 1.65 — 1.7 mm thick cover shall be provided.

Minimum bend radius: As per manufacturer standard

Weight: As per manufacturer standard

Lateral Cleaning System

Manually Operated with Heavy duty plastic rubber hose having I.D.: 19 mm (3/4‖) & Length:

15 meter long hose and useful for washing the vehicles & accessories after operation by

hand gun arrangement.

Make of Hose: Polyhose / Gates (India)

Mounting & Accessories

All the hydraulic hose ic. Hose harness (for operating hydraulic equipment like hose reel

Tender Documents 28 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

drum, hydraulic cylinder etc.) must well organized and guided most systematically and also

attached with firm structure of vehicle/unit. It must not found loosely lying/ hanging on

Electrical Wire harness (for lights, beacon, alarming buzzer etc.) must well organized and

guided most systematically and also attached with firm structure of vehicle/unit. It must not

found loosely lying/ hanging on vehicle/unit.

Safety Valves: - This shall be fitted on the pressure side of the pump. The safety valve

operates to limit the pressure at the maximum working pressure of the system.

The valve shall be factory fitted & sealed by pump manufacturer. The valve shall open &

discharge the total pump flow in the atmosphere there by eliminating the high pressure in the

system when the pressure exceeds the maximum working pressure.

The valve shall be made from the high quality brass & Stainless steel valve seats & shall be

supplied factory set as per the working pressure stamped on the valve body.

It shall be designed to withstand the pump's flow & pressure ratings.

Pressure Gauge: - Heavy duty glycerin filled pressure gauge having pressure range of

Pressure Relief Valve

Water level gauge shall be placed such a way that operator can easily visualize the level of

water. The water level gauge mounting shall be easy to clean periodically.

Audio/visual type water level alarm should be provided.

Rear Camera with good quality display arrangement

Reverse gear alarm

Standard tool kit

Workshop Manual

Spare Part Catalogue

Strobe lights and Beacon lights (Flashing lights) (minimum 2 nos.) are meant for safety

and shall be suitably mounted with Proper supporting structure. It should also have a Grill/

protecting cover for longer life and Light should be placed in such a way that it can visible

form farther distance.

Alarming buzzer should be provided for ensuring safety during actual jetting operation and

shall be suitably mounted with Proper supporting structure

Any other suitable mounting/ accessories (including auxiliary power point to plug-in

miscellaneous equipment‘s/accessories) which will enhance efficient operation and safety

with functionality aesthetic.

Sr. Nozzle Type Min. Qty (Nos.)

Tender Documents 29 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

1 Round head nozzle

2 Conical head nozzle

Hydraulic System

Hydraulic System: - A hydraulic pump of sufficient capacity to meet the operational

requirements of the system. The hydraulic system shall be provided with leak proof oil

storage tank of suitable capacity at suitable location for safety point of view. All hydraulic

connections to be a combination of high-pressure seamless pipes & flexible hoses to

facilitate easy replacement/repair Leaking of oil tanks is common issue observed due to

induced vibrations. The oil tank shall be designed and fabricated to ensure leak proof

operation for entire service life of the jetting machine. The oil tank shall not be mounted

above the engine exhaust line/battery from safety point of view.

Make of Hydraulic pump: Dowty / IPH/ Parker.

Instrumentation and Control Panel

A control panel shall be provided and located conveniently i.e. at one side of hose reel. All

gauges, switches, levers, etc. necessary for the operation of the unit shall be grouped in this

control panel so that the operator can have complete control of the operation, from one

The following operation points shall be included in the Instrument and control panel:

(i) Jetting / Bypass valve lever.

(ii) Directional control valve lever.

(iii) Acceleration lever.

(iv) Pressure gauge.

(v) Control panel lamp.

(vi) Low level water indicator.

(vii) Industrial socket for flash lamp.

(viii) Toggle switch for beacon.

(ix) Toggle switch for socket.

(x) Toggle switch for control panel lamp.

(xi) Toggle switch for low water level alarm.

(xii) As directed by Engineer in Charge at the time stage of Inspection.

Also focus light at rear end & Search light with extendable wire of minimum 10 mtr shall be

provided with suitable socket where power should be taken from vehicle.

Commissioning/ Training

The successful bidder shall arrange at his own cost to train client‘s operators for operating

and maintaining the unit@ Vadodara location only. Also, all relevant literature / SOP / Sign

boards shall be given during training. So, operator can understand operation of these

Anti-Corrosion Treatment

Tender Documents 30 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

The entire unit shall be painted with two coats of superior quality anti-corrosive primer with

two coats of approved quality paint. The tanker shall be painted with high quality glossy

surface finish and state of the art graphics.

The color code, symbols logo of VMC, and other details must be display with the state of art

aesthetic which shall be provided by VMC Vadodara authorities.

Both, exterior and interior of the unit will be sanded prior to spray painting

Covering of Jetting Components/ Vehicle Engine components

The bidder shall ensure that no engine component/exhaust system including jetting

machinery part left uncovered. The open space between the chassis driver cabin and tank

shall be Suitably covered with proper arrangement against water/rain for longer life of key

components with no compromise on aesthetic land functionality of the vehicle mounted

jetting system.

The tanker shall be suitably mounted on chassis and the space left out if any shall be

suitably utilized with suitable platform/chequered plates for better functionality with no

compromise on aesthetic.

All waterline connections shall be of a combination of high pressure seamless pipes and

flexible hoses, to facilitate easy replacements/repairs. The pipes shall be clamped

sufficiently to absorbed vibrations and to be easily accessible for maintenance.

Both exterior and interior of the tank shall be sand blasted prior to spray painting. The tank

exterior shall be spray-painted with two coats of superior quality anti-corrosive primer and

two coats of polyurethane paint of a reputed make. The colour shade shall be of customer

choice. To resist corrosion due to weak acids/sewage the tank interior shall be coated with

2-coat anti-corrosive gray epoxy paint of reputed make.

All necessary finishing shall be carried out prior painting. The under chassis parts and the

portion shall be painted with anticorrosive material. Complete unit including cross and super

structure member shall be painted with superior quality antirust paint.

The compacting unit shall be painted with anti-corrosive primer before painting with two

coats of polyurethane paint of ISI approve make. All necessary indicative labels shall be

pasted on for easy operation.

a. All welding work must be MIG welding only. The welding wire shall be of ESAB/

ADOR/ L&T only.

b. All angle and channels and other raw materials shall be as per Indian standard.

c. All MS material shall be of Tata/ SAIL/ Jindal/ Vishakhapatnam steel/ Essar/ Ispat as

suggested in the tender (for angle/channel if not available of above brand then it shall

be of IS/ISO approved make) only. Contractor has to submit necessary test report

and/or invoice copies.

d. Paint must be of standard brand only like Asian, Esdee, Grand Polycoats, Nerolac,

Berger, ICI, Dulux and Shalimar only.

Tender Documents 31 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

The following accessories shall be supplied along with each unit.

 CS checker plate (3mm thick) special maintenance platform with railing between

cabin & tank–1No.

 CS checker plate (3mm thick) catwalk with ladder – 1 no.

 CS checker plate (3mm thick) lockable tool box – 1 no.

 Float switch with indicator and hooter for low water level – 1 no.

 Rotating beacon with cabling – 1 No.

 Flash lamp – 1 no.

 Reverse audio visual horn – 1 no.

 Mud guards – 2 Nos.

 Mud Flaps – 4 Nos.

 Visual indicating light for PTO – 1 no.

 Filler hose –

 Standard Spare wheel with carrier mounted on chassis and Tool Kit shall be provided

 During Warranty period there should be no limit on Distance (km)

 There should be Lowering/Lifting and locking/unlocking of Rear Dumper Discharge

 Also focus light at rear end & Search light with extendible wire of 20 meter shall be

provided with suitable socket where power should be taken from vehicle.

INSPECTION &TESTING OF EQUIPMENT

All described Inspection & Testing at manufacturer's works must be carried out on risk and

cost of the contractor for jetting machine as per the terms of this tender.

It is to note that there will be inspection by the Technical Inspection Agency duly appointed

by VMC Vadodara.

The vehicle body fabricator shall refer to the guidelines of AIS-093 regarding tanker

mountings while mounting the jetting unit on an already type-approved chassis vehicle. This

will be subject to verification by and rectification (if by VMC Engineer/TPI Agency.)

Test of equipment at manufacturer's premises will be required to be conducted in presence

of VMC / TPI Engineer-in-Charge before dispatch of equipment and copy of final load test

and performance certificate must be submitted.

Raw material test certificate and Main components used in the unit's test certificate shall

have to be furnished at the time of inspection.

Quality Assurance Plan (QAP)

The supplier shall also provide the detailed technical specification along with the bid

submission for the part of fabrication & installation of Jetting mechanism on the prime mover

along with the internal Quality Assurance program. The supplier shall submit a Quality

Assurance Plan of the vehicle manufacturer for information. The supplier shall submit the

QAP for approval of the client within 30 days of placement of order. The test where client / its

authorized representative shall witness the test and where review of test reports shall be

done shall be clearly identified.

First unit/ sample shall be inspected/ verified by authorized representative/s of VMC and

Tender Documents 32 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

third party with the specification of VMC on approval of first unit/ sample; bidder shall have to

supply rest of units.

All facilities required during inspection& testing viz. travel, transportation, lodging &boarding

etc. should be provided to CLIENT‘S representative at no extra cost by contractor.

Equipment inspection shall be carried out by authorized representative of VMC. The client at

its discretion shall carry out stage inspection at the various critical stages at Bidder‘s works-

a) Final inspection including all accessories including Jetting test, stability, operation

and dimensional check.

b) Apart from inspection, which may be carried out by purchaser's representative or

authorized inspecting agency, Bidder shall furnish Test Certificates for all bought out

components and also details of their own in- house inspection carried out.

c) All costs towards inspection shall be borne by bidder, arrangements for arranging the

tests shall be provided by Bidder, within scope of technical parameters of e-tender.

d) It shall be the Bidder's responsibility to raise inspection call in writing to purchaser at

least 05 days prior to each stage as above. Bidder shall be provided an opportunity

to rectify defects but without any extension in the delivery period.

Inspection and checking of details of various components specified in the specifications and

agreed by the bidder, particularly the details of engine, drive system, brakes, hydraulic

system, electrical system, Jetting pump system, hydro-test of tanks, etc. including their

capacity, make, dimensions, etc.

Tests on equipment at manufacturer‘s works/field test shall be carried out as per applicable

standards / codes and specifications.

 All inspection, testing and examination shall be carried out in presence of Client‘s

engineer/ engineers.

 The certificate of the materials of the individuals units as well as internal test

certificate for the complete unit shall be submitted.

The inspection & test witness shall be particularly carried out at works:

 1. Pressure Test - Pump, Hose Pipe, Tank, all types‘ of Valves.

 2. Hydraulic Test - Hydraulic Pump, Hydraulic System, Tanks.

Technical Data Sheet is an important part of Tender

Specification/Document and the same shall be checked/verified with supporting

documentary proofs, wherever applicable/necessary and shall be duly filled in at the time of

Pre-Dispatch Inspection in the presence of inspecting officers/team/3rdparty inspection

agency and copy of certified/signed sheet has to be submitted to the tendering authority or

their authorized personnel and get dispatch clearance letter/certificate prior to delivery of

machine(s) from manufacturers works to the CLIENT‘S. The Technical Data Sheet with

applicable details (except product serial no.) shall be filled in and submitted along with the

Certificate of Origin (for imported items)

The contractor shall submit copy of certificate of origin, bill of landing letter of credit, proof of

custom duty paid and principal‘s (manufacturer) invoice of the imported components before

dispatching machine without which the machine shall not be accepted.

Tender Documents 33 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

PERFORMANCE REQUIREMENT OF SUPPLIED EQUIPMENTS

Technical Performance

The Authority reserves the right to impose financial penalty in a month in case the work is

not found up to the mark, during the routine inspection carried out by the Client's staff. The

decision on amount of penalty within the limit is sole discretion of the Authority& maximum

10% of the bill amount.

After satisfied inspection & testing of combined machines done by Authority‘s Engineers at

your works, successful bidder should be responsible for supply & delivery of machines from

works to VMC, Vadodara, Gujarat at his risk and expenses like e.g. temporary R.T.O.

passing, transportation, drivers, diesel, Road insurance etc.

Pollution Norms

Truck Chassis required for Machines is also in the scope of contractor. He must opt for

TATA / Ashok Leyland OR Equivalent Standard Manufacturer make chassis confirming to

BS- VI specification.

Vehicle Registration

Registration of the truck chassis must be done at Vadodara District, R.T.O. only.

Registration of Chassis must be done in favour of ―Municipal Commissioner, Vadodara‖.

Purchase of Chassis shall be in the name of ―Municipal Commissioner, Vadodara‖ at the

time of purchase of chassis itself.

Equipment Guarantee

Operator must have back up guarantee from the original manufacturer of imported

components like jetting pump/PTO and also confirm the spares supplied by manufacturer to

the bidders minimum for the period of 10 years. Operator shall guarantee the manufacturing,

design, materials, workmanship and performance of all goods to be supplied under the order

for a period of 12 months from the date of initial operation.

For all the equipments supplied under this tender the Bidder would give guarantee that the

Machines/Equipments conform to the technical parameters, quality standards and/or

guaranteed operational parameters as specified in the RFP and as specified in the submitted

bid document submitted by the Bidder.

If within a period of 120 days from the supply and successful commissioning of the

equipment the CLIENT finds any major deviation in the quality, technical parameter or

equipment it may issue notice to the Bidder to rectify the same within a period of 60 days. In

the event the Bidder is unable to rectify the same and the machine is found to be unable to

operate as per the equipment guaranteed parameters the CLIENT may reject the Machines/

Equipments and return the equipment and recover all payments made to the Bidder under

Equipment Spares

The successful bidder shall guarantee availability of spare parts and supply the same

throughout the life of the equipment as and when ordered, within a reasonable time period.

The equipment supplier shall submit a detailed spare part list with lead time for delivery of

the spares along with the O&M Manual.

Imported Equipment supplies

In case of imported equipment, current valid Letter of Authority and support letter in favor of

the Client for providing after sales service and spares parts support for 10 years duly

notarized to be enclosed with the bid. In case of order, bill of lading, custom clearance

Tender Documents 34 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

certificate and other supportive import documentation in original has to be submitted by the

Bidder to the Client for verification.

Supply, Commissioning and Delivery of Supply, Commissioning and Delivery 20-nos

of Truck chassis Mounted Jetting Machines 3000-ltrs. capacity for Vadodara Municipal

Corporationas per Technical Specifications The details of the Equipments with

capacities, to be procured are set out in the following table:

SN Tools and Equipments

1 Supply, Commissioning and Delivery of chassis Mounted Jetting

Machines (3000 litre capa. tank) as per specification of tender for

Vadodara Municipal Corporation

Quoted price of Jetting equipment installed on suitable chassis should

be inclusive of all taxes and duties like GST, To & Fro,

Transportation charges, Transits Insurance, entry taxes, other

applicable levies, comprehensive insurance, RTO passing charges

and F.O.R. at Vehicle pool Department, Bhutadi Zapa, Fatehppura

Vadodara Municipal Corporation, Vadodara.

Note: The actual number of units may vary and will be at the sole discretion of VMC

Tender Documents 35 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

Qualification and Eligibility Criteria

Online e-tenders invited for Supply, Commissioning and Delivery of Supply,

Commissioning and Delivery 20-nos of Truck chassis Mounted Jetting Machines

3000-ltrs. capacity for Vadodara Municipal Corporationas per Technical Specifications

from reputed qualified manufacturers who meet the criteria as prescribed in this section.

Eligibility Criteria

A. Eligibility to submit bids is confined to duly registered business entities, including

companies, partnerships, and sole proprietorships. Furthermore, bidders must be the

Original Equipment Manufacturer (OEM) of the Vehicle Mounted sewerage cleaning

equipments; bids from intermediaries or non-manufacturers will not be considered.

Bidder must have valid GST registration,

Bidder must have valid Provident Find registration certificate.

Bidder must have valid Employee State insurance (ESC) registration.

Bidder must have valid Professional tax registration certificate.

Bidder must have ISO 9001 (Quality) certifications

A. Manufacturer, Registered under NSIC shall be preferable while technical bid

B. The Bidder should be a Manufacturer/OEM of such type of chassis mounted Jetting/

Jetting cum suction / sewerage cleaning machines. The machine manufacturer must

meet the requisite quantity and other criteria for machine supply and performance as

mentioned in the experience clause. The machine manufacturer must submit details

of the overall experience of requisite quantity and other criteria for machine supply

and performance as mentioned in the experience clause in this RFP.

C. As Vadodara Municipal Corporation concerned with Emergency services, the bidder

should have own workshop within the radius of around 150 km from VMC just to get

the smooth services as and when required. Documentary evidence should be

submitted along with the bid.

Financial Criteria

A. The Average Annual Turnover of the Bidder should be at least Rs. 200 Lakh in last

financial years. Separate Chartered Accountant‘s certificate shall be attached along

B. The Bidder should submit a Bank Solvency/Bank Certificate of not less than Rs.

Lakh. The solvency Certificate issued shall not more than six month old.

Experience Criteria

The Manufacturer should have directly manufactured & supplied such type of Chassis

mounted sewer Jetting machine with tank capacity of minimum 3000 litre at least minimum

of the following during the last 07 years in India. All necessary documentary evidence in

support of the Bidder meeting the qualification requirement shall be submitted along with the

bid submissions.

A. Three similar works of Manufacturing and Supply of Similar Vehicles should not be less

than 40% of Bid Estimated value.

Tender Documents 36 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

B. Two similar works of Manufacturing and Supply of Similar Vehicles should not be less

than 50% of Bid Estimated value.

C. One similar works of Manufacturing and Supply of Similar Vehicles should not be less

than 80% of Bid Estimated value.

Similar work means work related to Manufacturing of Similar Vehicle i.e., vehicle Chassis

mounted Jetting / Jetting cum suction machine for sewerage cleaning having storage

capacity of minimum 3000 litre supplied to Government or semi-government or Municipal

Corporation or ULB or PSU in India.

The Bidder shall furnish a satisfactory performance certificate from Government or semi-

government or Municipal Corporation or ULB or PSU in India with self-attested copies of

purchase orders received from those clients and acceptance certificate in support of

experience shown for meeting the above criteria. The certificate shall be issued by the

authority not below the rank of Executive Engineer or General Manager. In absent of such

Completion certificate, experience shall not be considered for evaluation.

The Manufacturer should have directly manufactured & supplied at least 40 Nos. of

Jetting/Suction/Jetting cum suction machine (sewerage cleaning machines) at least

tank capacity of 3000-ltrs, in last 7 Years in Government or semi-government or Municipal

Corporation or ULB in India.

The Manufacturer shall furnish the list of Municipal Corporations/ ULBs/ PSU/ other

Government Institutions with address & telephone number to whom equipments have been

supplied during the preceding 7 years and the numbers of equipments/vehicle such supplied

vehicles. The Manufacturer must also furnish 3A Form/ Performance certificate for at

least 20 nos (out of 40 nos) sewerage cleaning machines such as

Jetting/Suction/Jetting cum suction machine at least capacity of 3000 ltrs.

The bidder should also submit the long term spare parts support commitment letter

from OEM for imported components (Pump, PTO, etc.) used in ordered equipment.

The manufacturer of the Machine should certify that the machine offered shall meet all the

technical parameters as specified in the tender and submit the detailed technical

specification and documents mentioned in the below list. For technically Evaluation only

consider online submitted documents.

1 Demand Draft for Tender fee and EMD

2 Details of Organization set up and evidence of workshop within the radios of around

150 k.m. from VMC

3 Company Profile Details

4 Registration Certificate of Firm /Company, & Factory license

5 Copy of performance certificate of machine supplied earlier by the Bidder as per

6 Bank Solvency Certificate

7 Copy of registration under NSIC

8 Copy of PAN Card/ GST Registration

9 Copy of Registration under ISO 9001 (Quality),

10 Last three year IT return copy

11 Not Black Listed in any Semi. Govt. / Govt. certificate

Tender Documents 37 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

(Declaration On Rs, 300 stamp paper)

12 Attested Copy of the power of attorney or signatory authority to sign the contract on

behalf of the company

13 Technical and general specifications of equipment‘s being offered on letterhead and

Technical presentation in support of the Technical Bid with all credentials and salient

features of the equipment

14 Filled up Data Sheet as per Appendix 6 meeting the technical requirements and also

submit technical Drawing

15 long term spare parts support commitment letter from OEM

16 Signed copy of the RFP

Disqualification

Even though the Bidders meet the above criteria, they are subject to be disqualified

and forfeiture of EMD (with approval of competent authority) and agency will be debarred

from VMC, if Bidder or any of its partner/member has:

- Made misleading or false representation in the forms, statements, and attachments

- Been debarred by Central govt. organization/ State govt. organization/VMC or any

other Agency of Government of India or any of the State Governments /ULBs

In case of a proprietary firm, partnership firm the following are the disqualification criteria in

case of failure to disclose information by partners or the proprietor:

(i) If, any of the partner or the proprietor is debarred by Central govt. organization/ State

govt. organization/ VMC or any other Agency of Government of India or any of the

State Governments/ Municipal corporation/ ULBs.

(ii) If, any of the partners or the proprietor has a criminal history or has been

convicted by any court of law for any of the offenses under any Indian laws.

iii) If, any criminal proceeding is pending in any court of law in India against any of the

partner or a proprietor and if any such proceeding culminates into conviction in last

Note: The experience as sub-contractor shall not be considered.

Tender Documents 38 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

VADODARA MUNICIPAL CORPORATION

ACCOUNTS DEPARTMENT

PARTY MASTER FORM

Party ID: ID Date:

Agency/Company Name:

Present Address:

Permanent Address:

Company Type: Company/Firm/Proprietor/HUF/Others

Body Type: Government/Non-Government

PF Registration No:

MICR No: IFSC Code:

Bank Name: Branch

(SB/CC/FD/OD/Current)

Signature Signature

Stamp of the Stamp of the

Department Party

Tender Documents 39 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

Financial Quotation for the Supply, Commissioning and Delivery 20-nos of chassis

Mounted Jetting Machines 3000-ltrs. capacity for Vadodara Municipal Corporation as

per Technical Specifications

(On the Letterhead of the Company)

The Executive Engineer (Mechanical)

Khanderao Market Building

Rajmahal Road, Vadodara – 390

Sub: Financial Quote for Supply, Commissioning and Delivery of 20-nos of chassis Mounted

Jetting Machines 3000-ltrs. Capacity for Vadodara Municipal Corporationas per Technical

Specifications.

Dear Sir/Madam,

We, hereby, having reviewed and fully understood all the terms and conditions of this Tender

Document, submit our financial quote for the Supply, Commissioning and Delivery of

following tools/equipment/machineries/vehicles for your evaluation. The price quoted

includes packing, forwarding charges, insurance, taxes (including CGST & SGST), levies,

duties and all other applicable taxes, registration charges, etc. Delivery will be made at

Vadodara; Gujarat at site specified by VMC and will be as per schedule specified in Clause

Notwithstanding any qualifications or conditions, whether implied or otherwise, contained in

our bid we hereby represent and confirm that our bid is qualified and unconditional in all

respects and we agree to the terms of this Document.

The price quoted above is net including taxes (including CGST & SGST), levies, duties and

all other applicable taxes. Packing, Forwarding, Insurance charges are included in the

indicated price.

The online prices are fixed and firm and are inclusive of all taxes (including CGST & SGST),

levies, duties and all other applicable taxes as may be statutorily applicable. Yours faithfully,

For and on behalf of (Name of Bidder)

Duly signed by the Authorised Signatory of the Bidder

(Name, Title and Address of the Authorised Signatory)

Tender Documents 40 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

Performance Security

(Performa of Bank Guarantee)1

THIS DEED OF GUARANTEE executed on this the ___________________day of

_________________________________ (Name of the Bank) having its Registered office at

_________________________________________________ hereinafter referred to as ―the

Guarantor‖ which expression shall unless it be repugnant to the subject or context thereof

include successors and assigns;

VMC, represented by The Municipal Commissioner, Vadodara and having its office at

Khanderao Market Building, Vadodara – 390 001, hereinafter referred to as ―VMC/ Owner/

Purchaser‖, which expression shall, unless repugnant to the context or meaning thereof

include its administrators, successors or assigns.

A. By the Contract Agreement (―the Contract Agreement‖) being entered into between VMC

and ______________________ 2 , a company incorporated under the Companies Act,

1956, having its registered office at ____________________, (―the Contractor‖), the

Contractor has been granted the Contract for Supply, Commissioning and Delivery

20-nos of chassis Mounted Jetting Machines 3000-ltrs. for Vadodara Municipal

Corporation as per Technical Specifications”, VMC (hereinafter referred to as ―the

Installation‖).

B. In terms of Article 7.2 of the Contract Agreement, the Contractor is required to furnish to

VMC, an unconditional and irrevocable bank guarantee for an amount of

Rs………………… (Rupees…………..only) as security for due and punctual

performance/discharge of its obligations under the Contract Agreement, relating to final

delivery of uniform by the Contractor.

C. At the request of the Contractor, the Guarantor has agreed to provide bank guarantee,

being these presents guaranteeing the due and punctual performance/discharge by the

Contractor of its obligations relating to the Project.

NOW THEREFORE THIS DEED WITNESSED AS FOLLOWS:

1. Capitalised terms used herein but not defined shall have the meaning assigned to

them respectively in the Contract Agreement.

2. The Guarantor hereby irrevocably guarantees the due and punctual performance by

M/s.__________________ (hereinafter called ―the Contractor‖) of all its obligations

relating to the Installation and in connection with final delivery by the Contractor in

accordance with the Contract Agreement.

To be issued by a Nationalized bank in India only.

In case of Consortium both the members would be included as Parties to the Agreement and collectively

referred to as “Contractor/ Consortium” as the context may require.

Tender Documents 41 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

3. The Guarantor shall, without demur, pay to VMC sums not exceeding in aggregate

Rs…………………….- (Rupees………….only), within five (5) calendar days of receipt

of a written demand therefore from VMC stating that the Company has failed to meet

its obligations under the Contract Agreement. The Guarantor shall not go into the

veracity of any breach or failure on the part of the Contractor or validity of demand so

made by VMC and shall pay the amount specified in the demand notwithstanding any

direction to the contrary given or any dispute whatsoever raised by the Contractor or

any other Person. The Guarantor‘s obligations hereunder shall subsist until all such

demands are duly met and discharged in accordance with the provisions hereof.

4. In order to give effect to this Guarantee, VMC shall be entitled to treat the Guarantor

as the principal debtor. The obligations of the Guarantor shall not be affected by any

variations in the terms and conditions of the Contract Agreement or other documents

or by the extension of time for performance granted to the Contractor or

postponement/non exercise/ delayed exercise of any of its rights by VMC or any

indulgence shown by VMC to the Contractor and the Guarantor shall not be relieved

from its obligations under this Guarantee on account of any such variation, extension,

postponement, non-exercise, delayed exercise of any of its rights by VMC or any

indulgence shown by VMC, provided nothing contained herein shall enlarge the

Guarantor‘s obligation hereunder.

5. This Guarantee shall be irrevocable and shall remain in full force and effect until

______ 3 unless discharged/ released earlier by VMC in accordance with the

provisions of the Contract Agreement. The Guarantor‘s liability in aggregate is limited

to a sum of Rs……………. (Rupees ………… only).

6. This Guarantee shall not be affected by any change in the constitution or winding up

of the Contractor/the Guarantor or any absorption, merger or amalgamation of the

Contractor/ the Guarantor with any other Person.

7. The Guarantor has power to issue this guarantee and discharge the obligations

contemplated herein, and the undersigned is duly authorised to execute this

Guarantee pursuant to the power granted under ______________.

IN WITNESS WHEREOF THE GUARANTOR HAS SET ITS HANDS HEREUNTO ON THE

DAY, MONTH AND YEAR FIRST HEREINABOVE WRITTEN

SIGNED AND DELIVERED

By the hand of Shri _______________________

Its __________________and authorised official.

60 months from the date of supply and acceptance of equipment as will be amended as and asked by VMC.

Tender Documents 42 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

Technical Details to be filled-in by Bidder along with offer

Description Details to be furnished by Bidder

Application Cleaning out the silt & other waste matters from sewerage

manholes &lines

Type 4-Wheel Chassis mounted Jetting machines for sewerage cleaning

Chassis Make Tata/ Ashok Leyland or equivalent reputed make( BS VI)

Fuel to be used

Fuel Tank Capacity

Gross Vehicle Weight

Discharge valve

Tender Documents 43 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

Water filtration system

Monitoring & Control

GPS Tracking system Enable for system installed by VMC

Indicators in panel

Engine oil Pressure

Operation hour meter

Water level Indicator

Other Indicators

Safety Requirements

Tender Documents 44 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

Pressure relief valve

Vaccum relief valve

- Bidder is required to fill in technical data sheet properly with all the details

asked for and also confirm compliance and or point out deviations, if any.

- Bidder is required to attach/submit back-up guarantee certificates for all

imported components from their principal manufacturers

- Successful bidder will have to submit relevant import documents viz. bill of

lading/custom clearance certificates, etc. for the imported components

fitted/used in the machine with respect to their model/serial numbers as asked

for in the technical data sheet.

Tender Documents 45 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

Pre-Qualification Criteria To Be Filled In By Tenderer

Performa for list of works of similar nature already completed by the Tenderer during

No. Name of work Cost on Number & Client name Year of Supply

and place completion Capacity of and

Equipment Address

Note: Bidder shall give performance/completion certificate from client. In absent of such

Completion certificate, experience shall not be considered for evaluation. If completion

Certificate covers ―Similar work with other work‖ then bidders shall have to submit Copies of

final bill indicating similar work or certificate of amount indicating ―Similar work‖ from relevant

Signature of the Contractor with seal

Tender Documents 46 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

Technical BID check List.

No. Documents Submitted Submitted

Online Hard Copy

(Yes/No) (Yes/No)

1 Demand Draft for Tender fee and EMD

2 Details of Organization set up and evidence of workshop within

the radios of around 150 k.m. from VMC

3 Technical staff Details

4 Registration Certificate of Firm /Company, & Factory license

5 Copy of performance certificate of machine supplied earlier by

the Bidder as per Appendix

7 Bank Solvency Certificate

8 Copy of registration under NSIC

9 Copy of PAN Card/ GST Registration

10 Copy of Registration under ISO:9001-2015

11 Copy of PF Registration and latest receipt

12 Last three year turn over certificate (CA certified copy)

13 Last three year IT return copy

14 Declaration of Contractor( Annexure – 1)

( On Rs, 300 stamp paper)

16 Attested Copy of the power of attorney to sign the contract on

behalf of the company

17 Technical and general specifications of equipment‘s being

offered on letterhead and Technical presentation in support of

the Technical Bid with all credentials and salient features of the

18 Filled up Data Sheet as per Appendix 6 meeting the technical

requirements and technical drawing.

19 Description of the Service Methodology to be adopted by the

Bidder for the supplied equipment

20 Signed copy of the RFP

Signature of the Contractor with seal

Tender Documents 47 Mechanical Department

Tender For Supply, Commissioning and Delivery of 20 -nos of suitable chassis Mounted small Jetting

Machines for Vadodara Municipal Corporation

AFFIDAVITS * Rs. 300 Stamp:

DECLARATION OF THE CONTRACTOR:

1.0 I, the undersigned, do hereby certify that all the statements made in the required attachments are

true and correct. I also understand that in case of wrongful/false information, corporation is entitled to

take any civil & criminal punitive action against me/us.

2.0 The undersigned also hereby certifies that neither our firm

M/s_____________________________________________________ nor any of its constituent partners,

directors etc have abandoned any work in India nor any contract awarded to us for such works has been

rescinded or debarred / blacklisted by Central govt. organization / State Govt. organization / ULB / Any

Municipal Corporation / VMC or any other Agency of Government of India or any of the State Government.

3.0 I under sign assured that, no criminal proceeding is pending in any court of law in India against any of

the directors, partners or a proprietor of our firm

4.0 The undersigned understands and agrees that further qualifying information may be requested, and

agrees to furnish any such information at the request of the VMC.

5.0 All my/our employee supplied under this contract with VMC have not any right to demand for

permanent job in VMC based on this contract. All contractual employees cannot go for strike for the same

demand or any advantages as permanent employee anyway

6.0 The VMC and its authorized representatives are hereby authorized to conduct any inquiries or

investigations to verify the statements, documents, and information submitted in connection with this

application and to seek clarification from our bankers and clients regarding any financial and technical

aspects. This Affidavit will also serve as authorization to any individual or authorized representative of any

institution referred to in the supporting information, to provide such information deemed necessary and

requested by you to verify statements and information provided in the Tender or with regard to the

resources, experience and competence of the Applicant.

I / We hereby declare that I / We have made myself / ourselves thoroughly conversant with the local

conditions regarding scope of work, all service or labour on which I / We have based my / our rates for this

tender. The specifications and Terms of tender on this work have been carefully studied and understood

before submitting bid.

Signed by the Authorized signatory of the firm

Title of the office

Name of the firm

Note: The affidavit format as indicated above to be furnished on non-judicial stamp Paper of Rs.300 and

duly notarized.

Tender Documents 48 Mechanical Department