CONSTRUCTION OF HT ROOM FOR TORRENT POWER CONNECTION AT VADAJ TERMINUS, AHMEDABAD

Bill of Quantities

Item Description Qty Unit Rate Amount

1 rcc- Demolition including stacking of serviceable 31.00 CuM 1047.00

materilas and disposal of unserviceable materials

with all lead and lift. (i) R.C.C. work

2 road- Dismentaling tiled of stone floors laid in 200.00 SMT 47.25

mortar including stacking of serviceable aterilas

and disposal of unserviceable materials with all

3 Excavation for foundation upto 1.5 m depth 75.00 CuM 115.92

including sorting out and stacking of useful

materials and disposing off the excavated stuff

upto 50 Meter lead.(A) Loose or soft soil

4 Excavation for foundation for depth from 1.5 m 25.00 CuM 128.52

to 3.0 m including sorting out and stacking of

useful materials and disposing off the excavated

stuff upto 50 Meter lead.(A) Loose or soft soil

5 Providing and laying cement concrete 1:3:6 (1- 10.00 CuM 2956.44

Cement : 3- coarse sand : 6- hand broken stone

aggregates 40 mmnominal size) and curing

complete excluding cost of formwork in (A)

Foundation and Plinth

6 Filling available excavated earth (excluding 38.00 CuM 129.10

rock) in trenches. plinth, sides of

foundations etc. in layers not exceeding 20 cm. in

depth consolidating each disposited layer by

ramming and watering.

7 Providing and laying ordinary cement concrete 15.00 CuM 8606.80

1:2:4 (1- Cement 2- coarse sand : 4- graded stone

aggregates 20 mm nominal size) and finishing

smooth with,curing etc. complete including the

cost of formwork but excluding the cost of

reinforcement for R.C.C work in (B) COLUMNS:

(iii)Having cross-sectional area more than

0.12Sq.M and upto 0.18 Sq.M

8 providing and laying ordinary cement concrete 8.00 CuM 6512.94

1:2:4 (1- Cement 2- coarse sand : 4- graded stone

aggregates 20 mm nominal size) and finishing

smooth with,curing etc. complete including the

cost of formwork but excluding the cost of

reinforcement for R.C.C work in (A) BEAMS :(iii)

Having cross-sectional area more than 0.12Sq.M

and upto 0.18 Sq.M

9 Providing and laying ordinary cement concrete 5.00 CuM 7380.23

1:2:4 (1- Cement 2- coarse sand : 4- graded stone

aggregates 20 mm nominal size) exposed work

with curing etc. complete including the cost of

formwork but excluding the cost of

reinforsement for R.C.C work in (iii) Slabs having

more than 10 cm and upto13 cm. thickness

10 Providing TMT Bar FE 500/500D reinforcement 6500.00 Kg 75.46

for R.C.C. work including bending, binding and

placing in position complete upto floor two level

11 Brick work using common burnt clay building 18.00 CuM 4011.66

bricks having crushing strength not less than

kg./Sq.Cm. upto floor two level in Cement Mortar

1:5. (1- Cement : 5 -fine sand)(B) Conventional

(more than 10 ton)

12 i) Half brick masonry in common brunt clay 15.00 SqM 593.90

building bricks having crushing strength not less

than 35 Kg/Sq.Cm. in Cement mortar 1:4

(1Cement : 4 -coarse sand ) in foundation and

plinth (B) Conventional

13 Providing 10mm thick cement plaster in single 120.00 SqM 102.38

coat on brick/concrete walls for interior

plastering upto floor two level and finished even

and smooth in (iii)Cement mortar 1:6 (1-

14 Providing 15mm thick cement plaster in single 150.00 SqM 174.83

coat on Rough (Similar)side of single or half

brick walls for interior plastering upto floor two

level and finished even and smooth in (i) Cement

mortar 1:3 (1-cement:3-sand)

15 Providing 20 mm thick double coat mala cement 150.00 SqM 269.78

plaster on interior brick / concrete work for

plastering comprising of base coat of 12 mm

thick cement plaster in cement mortar (1 Cement

: 4 coarse sand) inrough finishing and 8 mm thick

top coat of cement mortar 1:2 (1Cement :

Coarse sand) finished with trovel including

scaffolding curing etc. complete.

16 Providing and laying ordinary cement concrete 2.00 CuM 8634.45

1:2:4 (1- Cement 2- coarse sand : 4- graded stone

aggregates 20 mm nominal size) for R.C.C lintel

including finishing smooth with,curing etc.

complete including the cost of formwork but

excluding the cost of reinforcement.

17 Applying two coats of Birla or Asian acrylic lapy ( 200.00 SqM 40.19

putty) & two coats of primer of approved brand

and manufacture on new wall surface to give an

even shade including thoroughly brushing the

surface free from mortar dropping and other

foreign matter and sand papered smooth.

18 Wall painting (two coats) with plastic emulsion 200.00 SqM 78.44

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including throughly brushing the surface free

from mortar droppings and other foreign matter

and sand papered smooth.

19 Finishing wall with weather proof exterior 200.00 SqM 113.40

emulsion paint on wall surface (two coats) to

give an required shape even shade after

thoroughly brushing the surface to remove all

dirt, and remains of loose powdered

materials.etc complete

20 Providing and laying polished Kota stone slab 25.00 SqM 982.83

flooring over 20mm (Average) thick base of

cement mortar 1:6 (1-cement : 6-coarse sand) or

L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid

over and jointed with grey cement slurry mixed

with pigment to match the shade of slab

including rubbing and polishing etc. complete.

21 Providing upto floor two level precast cement 3.00 SqM 5694.38

concrete jali or grill 1:2:4 mix (1- Cement : 2-

coarse sand : 4-graded stone aggregate 6mm

nominal size) reinforced with 1.6 mm dia. Mild

steel wire including roughening,cleaning, fixing

and finishing in cement mortar 1:3 and curing

complete. (A) 50mm thick

22 Providing and fixing M.S. grills of required 500.00 kg 100.17

pattern to wooden frames of windows etc. with

M.S. flats at required spacings and frame alround,

square or round bars with round headed bolts

and nuts or by screws (A) Plain Grill.

23 Providing and fixing 1.20 Metre high fencing with 50.00 SqM 385.40

2.0 Metre long M.S. Angle posts 40mm x 40 mm

x6 mm and oil painting 3 coats fixed at

Mt,C/c. with five Horizontan lines and two

diagonals of galvanised steel barbed wire

weighting 9.38 Kg. per 100 Metre, strained and

fixed to posts with G.I,staples including fixing the

postsin ground with 0.5 M x 0.5.M x 0.5 M. block

in C.C1:5:10 etc complete

24 Making trench in Hard Murrum / Tar Road of 50.00 SqM 62.00

suitable width of 90 cm or required depth for

laying any size of cable or locating the fault all

over the run and back filling the same and

making the surface as normal ground.

25 Providing and fixing pre-cast Rubber Dye / steel 100.00 SqM 680.10

Dye inter locking concrete block 60mm thick

with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per

approved design Confirming to IS 15658 :

including 35 mm Sand layer for levelling and

filling the joint with sand in proper line and level

as per guidlines of IRC : SP 63-2018 etc.

26 Providing and fixing pre-cast concrete kerb stone 20.00 Rmt 358.06

of gray cement based concrete block 30cm

length,30cm height and 15cm thick of M250

grade concret as per approved design and

including excavation for fixing in proper line and

level,filling the joint with C:M 1:3 (1cement:3fine

sand) etc complete.

27 Providing & laying. R.C.C. Hume pipe for cable to

be laid 90 cm. below ground across the road

crossing or on floor with necessary material in an

approved manner and making the ground as per

28 Constructing brick masonry chamber for 2.00 Each 7109.35

underground C.I. Inspection chamber and bends

with bricks having crushing strength not less

than 35Kg/ Cm2 in C.M. 1:5 C.I. cover with frame

(Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to

be not less than 38Kg. (Wt. of cover 23 Kg.) and

Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4

mix (1-cement :2coarse sand :4-graded stone

aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mmthick with cement

mortar 1:3 finished smooth with a floating coat

of neat cement on walls and bed concrete etc.

complete.(iii) Inside dimensions 600mm x

mm and 450mm deep for pipe lines with three or

29 Extra over items 24.44 for every additional depth 3.00 Each 322.37

of 0.1M. of part thereof beyond 450mm depth for

Brick masonry chamber.(iii) for 600mm x

30 Steel work, welded in built up sections framed 350.00 kg 100.00

workincluding cutting, hoisting, fixing in position

and applying a priming coat of red lead paint. in

Box Pipes, flats,plates with connecting plates or

angle cleats as in main and cross beams. Hip and

jack rafters, purlins conneted to common rafters

31 WATER PROFFING -Water proofing material 25.00 SMT 46.61

heasion base self finish tar felt roll

32 CHINA MOSIC- Providing and laying broken 25.00 SMT 739.89

chine mosaic flooring for terrace using 12 mm to

20 mm broken pieces of glazed tiles to be laid

over cement mortar 1:3 to plain or slope and to

be tempered to bring mortar creme out upto

surface using white cement including rounding

off junctions and extending them upto 15 cm

along the wall,clearing with water and oxalic acid

etc. as directed.

33 Point wiring for Light / Bell with 2-1.5 sq.mm 5.00 Pt 415.00

& earthwire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of

pipe to be erected concealed in/ on surface on

wall/ceiling complete with 6A Modular type

switch / bell push & accessories and earth

continuity of following type, erected on PVC /

Metallic box, single mounting base frame

covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose

/ H.D.Connector as directed. (a) with medium

class Rigid PVC pipe and accessories CAT III

34 Point wiring for FAN with 2-1.5 sq.mm & 2.00 Nos 593.00

earthwire of 1.5 sq.mm (Green) both are of .ISI

marked 1.1 KV Grade FRLS PVC insulated

multistrand copper wires, in following type of

pipe to be erected concealed in / flushed on

wall/ceiling complete with 6A Modular type

switch and hum free EME four or more step type

electronic fan regulator with separately mounted

and accessories with earth continuity of

following type erected on PVC / Metallic box,

single mounting base frame covered with

textured/metallic front plate modules erected on

/ in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as

directed. (a) with medium class Rigid PVC pipe

and accessories.CAT III

FANS & EXHAUST FAN ACCESSORIES

35 Providing and erecting Approved make Ceiling 1.00 Nos 1581.00

fan with double ball bearing ISI mark with

condenser A.C. 23OV.50 c/s.1200 mm. sweep

complete, canopy erected on existing hook or

clamp with earthing. [Make shall be approved by

Engineer in charge]

36 Providing 2.5mm.thick laminated acrylic sheet to 1.00 Nos 18.00

cover the fan hook or Fan box.

37 Supplying and erecting 19 / 20 mm. nominal 1.00 Mtr 107.00

bore Medium Class M.S. Pipe down rod erected

duly painted for fan complete with necessary 24/

O.20, 3 core flexible wire with earthing.

38 Supplying & erecting fan hook box of 10 mm 1.00 Nos 107.00

M.S. round bar bounded to the RCC bars up to

50mm length each side and pierced through a

Gauge M.S. box / Heavy Duty PVC box complete

erected concealed in Ceiling with necessary

39 Supplying & erecting single phase approved 1.00 Nos 3306.00

make industrial exhaust fan suitable for medium

duty ring mounted low noise operation suitable

for medium duty having following dia size and

maximum speed in RPM [D] 450 mm dia

LIGHTING FIXTURES :

40 Supplying and erecting LED indoor fittings with 4.00 EA 370.00

LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion

resistance with diffuser with company

mark/name 160V to 270V, Power Factor more

than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.).

(A) Tube Light with integral driver. (iv) 22-24

Watts, Surge - 2KV,IP-20, conventional 4 feet.

DISTRIBUTION BOXES

41 Providing and erecting Sheet Steel powder 1.00 Each 577.00

coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth

bar and DIN rail, confirming to IS 13032 and BS

5486-1986 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same

company of MCB to be used) (A) single phase

incoming and horizontal single phase outgoing

MINIATURE CIRCUIT BREAKER

42 providing and erecting Miniature circuit breaker 4.00 EA 111.00

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA

to be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III

43 Providing & erecting 240 V MCB double pole 1.00 Ea 297.00

switch for motor & inductive load (C Curve)

having 10 KA breaking capacity & confirms to IS :

8828 in existing box having following capacity

(A) 6 to 32 Amp.

44 Approved make ELCBs / RCCBs conforming to IS: 1.00 Ea 1950.00

12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 6 KA and suitable

for operation on single phase 240 V. having

characteristic of quick action & tripping with all

advance feature & do not incorporate any

electronic component. for following Max. rating

erected as directed (i) 25 Amps.DP Cat. III

45 Providing and erecting HOT deep Galvanised iron 10.00 KG 77.00

strip wire 8 to 16 SWG.

46 Providing and erecting required size HOT deep 10.00 KG 77.00

Galvanised iron strip for earthing of H.T. , OCB/

ACB/ Transformer LT panel board, Motors etc.

using proper clamp.

47 Supplying & erecting in earthpit of minimum

bore dia. 225mm size approved make Safe

Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of

corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-

250 Micron galvanising, connection terminal dia

of 14 mm with constant ohmic value

surrounded by highly conductive compound with

high charge dissipation suitable for following

type of applications with chamber and heavy

duty cover.(approved make OEM has to submit

test certificate including value of earth resistane

of installation.

(c) For Electrical Installation covering 1.00 Ea 10489.00

Transformer Neutrals, Lightning arrester

Earthing, A.C.Plant & Sensitive Computer

System(like Automation, SCADA) i.e independent

Earthing in normal soil.

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

48 Providing & laying. R.C.C. Hume pipe for cable to 10.00 Mtr. 340.00

be laid 90 cm. below ground across the road

crossing or on floor with necessary material in an

approved manner and making the ground as per

original.(C) 300 mm dia

49 Providing and erecting Street Light pole bracket 6.00 Each 677.00

comprising main B Class GI pipe of

cm/require outside dia. complete with suitable B

Class G.I. sleeve tubing of approx. 45cms.length

and suitable for 76.5 mm /80mm / required size

of pole top having sufficient fasteners for fixing

the brackets and having spread of 1.5.mtr. length

with 110 deg.with vertical plane & suitable

welded stays, reducer and with check nuts

complete painted with one coat of Red oxide / PU

base primer and two coats of Aluminium / PU

paint. paint with following nos of arms.[A] Single

Arm Bracket 1.5 Mtr

50 Supplying and erecting LED street light / Flood 6.00 Each 5917.00

light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 &

LM-80 certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.).

(A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection. (iii) Above 60 to

51 Supplying and erecting Flexible PVC insulated

multi strand multi core 1.1 kv grade ISI marked

copper wires of following size to be erected as

(h) 2.50 Sq.mm 3 core round PVC sheathed 20.00 Mtr 73.00

GST : GST will Be paid Separately as per government Policy Which will be bidded to the contractor.