SPECIAL REPAIRS TO BLDG NO T-502, P-63 AND SPECIAL REPAIR TO ROOF AND LATHE WALL OF BLDG NO T-560 A TO F (OR MD ACCN) AT MASIMPUR MILITARY STATION UNDER GE SILCHAR

Amount

PART-I (B/R WORKS) Dismantling of Plain or corrugated steel sheeting any gauge or any thickness in roof covering complete all as specified and directed.

Dismantling of timber boarding of any description fixed in any position with nails complete all as specified and directed.

Dismantling of timber fillets rails, posts, rafters, purlins etc under 40 Sqcm in section, in any position in unframed work complete all as specified and directed.

Dismantling of ceiling board as in ceiling and lining of any gauge or any thickness including cover fillets complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level complete all as specified and directed.

Demolition of PCC as in roofs, floors (other than ground floors) cement concrete (unreinforced) beams, and similar suspended works complete all as specified and directed.

Demolition of reed lathing, single or double including battens and plaster or chiken wire lathing complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors etc laid, bedded and painted in any mortar complete all as specified and directed.

Taking down shutter of any description each not exceeding 1 Sqm each complete all as specified and directed.

Taking down shutter of any description each exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.

Taking down shutter exc 1 sqm and n exc 2 sqm each leaf and re fixing in same opening complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from frame) each not exceeding 1.50 Sqm each complete all as specified and directed.

Taking down Chowkhat or frame with shutters (without taking off shutters from frame) each not exceeding 1.50 Sqm each complete all as specified and directed.

Taking down shutters of any description n exc 1 sqm each leaf and refixing in same opening complete all as specified and directed.

Taking up or down 15mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Complete revmoving of old roof treatment of any type complete all as specified and directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Meterial and labour for reinforced cement concrete 1:1.5:3 type A-1 using 20 mm graded stone aggregate as in lintel, beam etc. complete all as specified and directed.

M&L for reinforced cement concrete type A1, 1:1.5:3 using 20 mm graded aggregate as slab supported on walls, beams and columns in floors, roofs landings balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Use and waste Formwork to sides and soffits of floor or roof beam, beam hunching, girder, lintels, cantilever, shelves including supports, etc for rough finished flat surfaces of concrete complete all as specified and directed.

Material and labour for 10mm dia and over TMT bars, cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Material and labour for 6mm to 8mm dia TMT bars, cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

All as per item No. 27 here in before but mild steel bar 5 mm and over up to 10 mm dia as in stirrups, spacers and binders complete all as specified and directed.

M&L Plain cement concrete 1:2:4 type B-1, (using 20 mm graded stone aggregate) as in bed blocks, coping, cills, steps, kneelers, bed plates, apex stones kerbs and similar work including necessary form work complete all as specified and directed.

M&L for 40mm thick plain cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in flooring finished even and smooth without using extra cement complete all as specified and directed.

M&L for Aluminium dividing strips, 1.5mm thick 38mm deep and inserted in position to conform to design complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C2 using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement laid shall be alternate panels and joints filled with bituminous 1 part and 3 part of sand complete all as specified and directed.

M&L brick work with sub class ‘B’ brick straight or curved on plan to any radius in half brick wall in cement mortar 1:4 complete all as specified and as directed.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L rendering 5 mm thick cement plaster CM 1:3 to ceiling fair and even surfaces complete all as specified and directed.

M&L 10mm thick rendering in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for 12 mm thick rendering in cement mortar (1:6) on other side of lathing surface finished fair and even complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar (1:4) over 5 mm thick with WPC in cement mortar (1:4) on fair faces of brick or concrete, finished even and smooth without using extra cement on walls complete all as specified and directed. Note : WPC shall be measured and paid separately.

M&L Rendering 15mm thick cement plaster in two layer each of 10+5mm thick on one side of lathing in CM (1:4) & water proofing compound mixed with second layer @3% finished fair and even complete all as specified and directed. Note : WPC shall be measured and paid separately.

Supply only WPC complete all as specified and directed.

S&F Glazed ceramic colur tiles (300 x 450 x 7mm thick) on dado & skirting , set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering rough/even & fair finished in cement mortar 1:4 to receive tile complete all as specified and directed.

S&F Non Skid ceramic tiles colour 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layers in cement mortar 1:6 including brushing with neat cement slurry with 3 Kg of cement per sqm complete all as specified and directed.

S&F Non Skid ceramic tiles colour 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 but not exceeding 0.11 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layers in cement mortar 1:6 including brushing with neat cement slurry with 3 Kg of cement per sqm complete all as specified and directed.

M& L for Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layers 15 mm thick in cement mortar (1:6) for laying floor finishesrushing with neat cement slurry with 3 Kg of cement per sqm complete all as specified and directed.

All as per item No. 44 above but skirting including 10mm thick backing coat in cement mortar 1:3 laying complete all as specified and directed.

M&L for Granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl rounding edges including 15 mm thick screed bed or bedding layers in cement mortar 1:4 including brushing with neat cement slurry with 3.00 Kg of cement per sqm complete all as specified and directed.

S&F 2nd class hard wood, 35 mm thick, plain framed panelled shutter (any numbers of panel) with panels of timber flat on both sides (feather edged) or 12 mm thick veneered particle board medium density fitted to chowkats or frames complete all as specified and directed.

S&F 2nd class hard wood glazed and skeleton ventilator / window shutters 30mm thick open rebated and prepared to receive glass, etc of framing plain, chamfered or rounded but divided into squares with plain chamfered or rounded, mitered and rebated sash bars any numbers, size of member of shutter as specified in SSR part -I, section -8, clause 8.20 (b) complete all as specified and directed.

M&L 2nd class hard wood, 35 mm thick, glazed and skeleton shutter, divided into square, with plain, chamfered or rounded mitered and, any number of panels, prepared to receive glass, gauge etc. edges of frames chamfered or round size of numbers of shutters as specifed in SSR Part-I section clause 8.24 (a) complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements, complete all as specified and directed.

Supply and fix 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

S&F 2nd class hard wood glazed and skeleton ventilator/window 30 mm thick open rebated and prepared to receive glass, wiremesh gauge etc (without sash bars), edge of framing plain chemfered rounded fitted with cut and mitred beds for securing glass etc size of members size of members of shutter as specified in SSR part I section 8 clause 8.20(a) complete all as specified and directed.

S&F for GI wire netting 0.70 mm dia and 12 mm mesh lathing to wood or metal studding joints etc in walls ceiling stanchion, beams etc included all laps cutting and wastes complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel, 100 mm size, complete all as specified and directed.

S&F 75 mm size stainless steel butt hinges medium weight complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts of extruded section 200mm long complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 150mm length complete all as specified and directed.

S&F Aluminium handle cast type anodized of size 125mm complete all as specified and directed.

S&F 100 mm long aluminium handles cast type anodised complete all as specified and directed.

S&F Mild steel sliding door bolt, 250 mm, plate type, stove enameled black, with bright bolt not less than 12 mm dia, with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F Door stopper of aluminium alloy body and tongue, anodised with hard drawn steel springs, fixed to door with over all length 150mm with rubber bush complete all as specified and directed.

Supply & fix Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed.

S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putting square nexc 0.5 sqm in each pane complete all as specified and directed.

Supply & fix in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed.

S&F Aluminium handle cast type anodized of size 75mm complete all as specified and directed.

S&F 40mm powder coated mild steel magnet/ball catcher fixed with screws complete all as specified and directed.

M&L continous (piano) type hinges bright finish or electrogalvanised MS with 30mm flap (when open) complete all as specified and directed.

S&F 20 mm dia stainless steel curtain rods with brackets, stops, roller with fancy type end cap etc complete all as specified and directed.

S & F MS work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Material and labour for second class hard wood plain fillets, square, rectangular or triangular in section, wrought secured with nails sectional area exceeding 6 sqcm but not exceeding 13 sqcm all as in plaster beads complete all as specified and directed.

Material and labour for second class hard wood plain fillets, square, rectangular or triangular in section, clean sawn Secured with nails sectional area exceeding 13 sqcm but not exceeding 25 sqcm all as in plaster beads complete all as specified and directed.

Material and labour for second class hard wood plain fillets, square, rectangular and triangular in section, wrought, bull nosed, splayed, chamfered or rounded on one edge or face, sectional area exceeding 6 sqcm but not exceeding 13 sqcm complete all as specified and directed.

S&F 2nd class hard wood timber scantling in wrought fixed to unframed work including dismantling scantling 40sqcm and over in section, in any position complete all as specified and directed.

M&L for 2nd class hard wood 50 mm thick boarding wrought as in purlin, rafter etc fixed with nails complete all as specified and directed.

M&L for 18mm / 19mm thick block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face, fixed with screws to timber frame work complete all as specified and directed.

M&L Prelaminated particle board 18/19mm thick exterior grade prelaminated one side with decorative choice lamination and other side white lamination directed by Engr in charge fixed with screw frame work incl provn of external teak wood leaping 6mm thick fixed with nails to shutter/shelves complete all as specified and directed.

S&F Expanded metal of weight not exc 4kg per sqmcut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed.

S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and or riveted, or forged in to spikes; framed guard bars; similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

Supply and fix second class hard wood 20 mm thick boarding, wrought as in eaves board, fixed with nails in any position (except flooring and skirting) with butts joints the boarding fixed in any position with nails complete all as specified and directed.

M&L for plain cement concrete 1:1.5:3 type B0 using 12.50mm graded stone aggregate as in roof padding, haunching, roof kerb or similar work complete all as specified and directed.

M & L 10mm thick rendering in cement mortar (1:4) mixed with water proofing compound @3% by weight of cement over while the padding concrete is still green finished even & fair without using extra cement complete all as specified and directed.

M&L applying one coat of cold bituminous primer (as approved by GE) @0.25ltr/per sqm over dried up surface of concrete/plastered including cleaning surfaces confirming to IS 3384-1986 complete all as specified and directed.

Supply and laying APP based polymeric membrane 3 mm thick (Minimum), weighting not less than 3.5 kg/Sqm reinforced with polyester non woven fabric (weighting not less than 160 gms/sqm) shall be applied over Bituminious primer as specified above. Application of polymeric membrane shall be by torching application etc as per manufacturer's instructions. The overlaps shall be minium 100 mm on the transverse direction and 75 mm longitudinal direction including one coat of aluminium paint over the APP modified membrane @ 0.11 Kg/Sqm complete all as specified and directed.

Cutting chases for concealed GI cutting chavns tube n.exc 15 cm girth and triming out in with or without reinforced surface complete all as specified and directed.

S&F GI tube 15 mm dia (ISI Marked) medium grade galvanished with all fittings laid in floors or fixed to wall etc. complete all as specified and directed.

S&F GI tube 20 mm dia (ISI Marked) medium grade galvanished with all fittings laid in floors or fixed to wall etc. complete all as specified and directed.

Supply and fix, as in repair, 15 mm bore bib taps fancy type, chromium plated, cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fix as in repair 15 mm bore pillar tap fancy type, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe complete all as specified and directed.

Supply and fix, as in repair, angle stop valve fancy type, cast copper alloy,chromium plated ,screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions complete all as specified and directed.

Supply & fix in repairs fancy type stop valve, cast copper alloy, chromium plated with long shank and cup (concealed type), screwed down for 15 mm bore pipe complete all as specified and directed.

S&F in repair chromiuim plated Swivel shower roses with arm, 125 size including fixing to 15 mm bore GI pipe or union complete all as specified and directed.

S&F in repairs kitchen sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, i bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410 mm x 330mm x 160mm etc complete all as specified and directed.

Supply and fix in repairs vitreous china wash basin, white, counter top, size 450 x 400 mm oval shape excluding taps, waste, chain and plug and porcelain stopper complete all as specified and directed.

S&F in repairs for vitreous china wash down water closet pan of padestel pattern white with 'P' or 'S' trap including seat cover of same make etc complete all as specified and directed.

S & F in repairs PVC valveless, syphonic action type, low level PVC flushing cistren 10 ltr capacity white with flush pipe & all fitting and flush pipe complete all as specified and directed.

S&F in repairs Health faucet ABS body with wall hook and 1 metre SS braided rubber hose pipe and hook complete all as specified and directed. Cat Part No : F8030102 of Cera and equivalent as approved by GE.

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S & F in repairs Oceana corner glass self made of 12mm thick 300mm x 300mm radius between flanges of brass chromium plated D clamps complete all as specified and directed. Cat part No : F5005103 of Cera or equivalent as approved by GE.

Supply & fix PVC waste coupling for 32 mm bore waste pipe in WHB complete all as specified and directed.

Supply & fix in repairs CP towel rail 20 mm dia, 60 cm long and and including chromium plated brass screws and wooden/plastic cleat complete all as specified and directed.

Supply and fix in repairs, vitreous china squatting pan of Orrisa pattern size 580mm x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including 'P' or 'S' trap and lime concrete bedding connection making good to floor all as specified and directed.

Supply & fix PVC waste pipe 32 mm bore for WHB complete all as specified and directed.

Supply & fix in repairs PVC (SWR) floor trap 75 mm outlet diameter, plain with grating including jointing with solvent cement complete all as specified and directed.

Supply & fix in repairs PVC (SWR) Pipe 75 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

Supply & fix in repairs PVC (SWR) bends 75 mm bore any radius complete all as specified and directed.

S & F Asbestos cement plain building boards 4mm thick fixed to timber framed work with screws in ceiling complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of exterior weather coats (as per manufacturers instruction) (Appex Ultima) of M/s Asian make or equivalent of M/s Berger, M/s Shalimar, M/s Nerolac with one coat of primer complete all as specified and directed.

M&L preparation and applying two coats of oil emulsion (distemper) over a coat of primer on new plastered surfaces of walls over a coat of wall putty including preparation of surfaces complete all as specified and directed.

Materials and labour for preparation of new surfaces of wood or wood base materials of any description, over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Material and labour for complete removal of existing treatment and applying two coats of exterior wheather coats (as per manufacturers instruction) (apex Ultima) of M/s Asian make or equivalent of M/s Berger M/s Shalimar M/s Neroloc over a coat of wall putty 3mm thick complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coat of oil bound distemper (white or tinted) over one coat of whiting on wall over one coat of wall putty complete all as specified and directed.

M&L preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L preparation of old decorated steel surface of any description over 10cm width or girth applying one coat of synthetic enameled paint complete all as specified and directed.

M&L preparation of old decorated wood or wood base surface of any description over 10cm width or girth applying one coat of synthetic enameled paint complete all as specified and directed.

M & L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

M & L for preparation of newly plastered surfaces and applying three coats of white wash on wall complete all as specified and directed.

M&L for preparation of old surfaces of wall, by washing rubbing down and stopping and applying two coat of distemper oil emultion of any colour all as specified.

PART-II (E/M WORKS) Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc. complete all as specified and directed.

M & L for Point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm FRLSH (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty, PVC casing caping including all accessories etc ISI marked, surface boxes with earth dolly suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly for one light point/fan point/ bell point complete all as specified and directed.

All as per item No 120 above but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

All as per item No 120 above but for One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per item No. 120 above but with stranded copper conductor 2.5 Sq mm (nominal area), two single core, PVC insulated and unsheathed cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated stranded copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

All as per item No. 120 above but with 4 Sq mm stranded copper conductor for one power point on independent board and including 4 sqmm earth continuity wire for AC / equipments etc controlled by one SP/SPN MCB. (MCB will be measured saparately) Note: The point wiring wiil be done from DBs to the Switch sockets of any size with three wires running independently for each point and with no tappings.

Supply and fix ceiling rose surface bakelite with three terminals complete all as specified and directed.

Supply and fix switch piano flush type button single pole one way 5 Amps complete all as specified and directed.

Supply and fix socket outlet 3/5 pin 5 Amps flush type complete all as specified and directed.

Supply and fix switch socket outlet 3 pin 5 amp and 6 pin 15 Amps 2 in 1 universal complete all as specified and directed.

S & F ceiling fan regulator socketed, step type, flush type heavy duty suitable to work on 230 volts Ac supply complete all as specified and directed.

Supply and fix lamp Angular holder insulated body with back plate suitable for batten fittings complete all as specified and directed.

Supply and fix Bell Push flush type 5 Amps complete all as specified and directed.

Suply and fix for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ AC supply complete all as specified and directed.

Supply and fix wall mounted LED batten for fixing upto 22 watt LED tube rod both side connection box type complete all as specified and directed. Make. Havells, Product Code : REGALBATTENT8UPTO1X22WDSBSWH or equivalent make of Philips/Bajaj/Wipro/Syska LED/Crompton Greaves/M/s Surya Roshni Limited /M/s Jaquar & Company Pvt Ltd

Supply and fix wall mounted LED tube rod 22 watt, pin on both side suitable for fixing upto 22 watt battens complete all as specified and directed. Make:- Havells, Product Code : CRYSTAL1213T8DSTL20WLED865SGLASS or equivalent make of Philips/Bajaj/Wipro/Syska LED/Crompton Greaves/M/s Surya Roshni Limited /M/s Jaquar & Company Pvt Ltd

Supply and fix CITY 3, decorative wall light fixtures made up of polycarbonate suitable for 10 watt LED (spiral B-22 base) including 1 x 10 wall LED lamp and all fixing arrengement, connection complete all as specified and directed. Make:- Havells, Cat No. LHDLO6160099 or equivalent make of Philips/Bajaj/Wipro/Syska LED/Crompton Greaves/M/s Surya Roshni Limited /M/s Jaquar & Company Pvt Ltd

Supply and fix linear and compact 9 watt mirror light with decorative grey end caps, polycarbonate body and ribbed opal diffuser internally pewired complete with LED lamp and all fixing arrengement including connection complete all as specified and directed. Make:- Havells, Cat No. LHEXARP7PN1W009 or equivalent make of Philips/Bajaj/Wipro/Syska LED/Crompton Greaves/M/s Surya Roshni Limited /M/s Jaquar & Company Pvt Ltd

Supply and fix street LED bulk head 10 watt comprising of pressure die cast housing with acrylic diffuser IP 65 protection with all accessories complete all as specified and directed. Make:- Jaquar, Cat No. LBLK01X010XW or equivalent make of Havells/Philips/Bajaj/Wipro/Syska LED/Crompton Greaves/M/s Surya Roshni Limited

Supply and fix street/bldg security light LED luminaire 15 watt IP 66 LED lamp, driver etc, including service bracket with all accessories complete all as specified and directed. Make:- Havells type 15W LED, Cat No. ENDURAPEARLSL15WLED757SASYTOPCMP or equivalent make of Philips/Bajaj/Wipro/Syska LED/Crompton Greaves/M/s Surya Roshni Limited /M/s Jaquar & Company Pvt Ltd

Taking down tube light fitting 1x22 watt batten type from existing location and re-fixing in existing/new location after completion of civil work complete all as specified and directed.

Taking down Energy meter single phase of any capacity from existing location and re-fixing in existing/new location after completion of civil work complete all as specified and directed.

M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated cable with stranded copper conductor of size 6 Sq. mm FRLSH nominal area and drawing into PVC non metallic rigid PVC casing including one run of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor as earth wire fixed in repairs complete all as specified and directed. Note:- Two runs of 6 sqmm cable, one run of 6 sqmm cable and one run of PVC casing caping will be measured as one unit.

S & F in repair plastic body exhaust fan, AC single phase, 240 V of size 250 mm sweep with louvers including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan and deposited to store complete all as specified and directed.

Supply and fix in repairs metal plug and socket with MCB SP 20 Amp 240 V enclosure for AC/equipment with neutral and earth point complete all as specified and directed.

Supply and fix sheet metal enclosure powder coated three phase Neutal for fixing of MCBs, 4 ways double door with bus bar including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed.

Supply and fix sheet metal enclosure powder coated single phase DB for fixing of MCBs, 8 ways double door with bus bar including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed.

Supply and fix sheet metal enclosure powder coated single phase DB for fixing of MCBs, 4 ways double door with bus bar including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed.

Supply and fix MCB TPN 415 volts, 50 Hz of capacity 63 Amps complete all as specified and directed.

Supply and fix MCB SP 240 volts, 50 Hz capacity 6-32 Amps complete all as specified and directed.

Supply and fix MCB SPN 240 volts, 50 Hz of capacity 40 Amps complete all as specified and directed.

Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25 m deep bellow ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth lead wire 4 mm dia by means of galvanized iron or steel bolts, nuts, check nuts and washers, and connected to equipments as directed, including funnel with GI med grade watering pipe 20 mm bore, wire mesh, charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with concrete pit in PCC 1:3:6 type C1, 50 mm thick pre cast RCC 1:2:4 type B1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar, GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance not exceeding 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES Schedule 2009, Part-I complete all as specified and directed.

Supply and lay testing & commission of replacement of Cable or fixed to wall/floors XLPE insulated, PVC bedded, Galvanised steel strip or wire armoured, Electric power cable heavy duty with stranded aluminium conductors,1100 volt grade, 16 Sqmm, 4 Core laid in trenches/fixed to walls/poles etc. complete all as specified and directed.

Supply and fix 1100 Volts grade heavy duty cable PVC insulated aluminium multistranded conductor of size 10 Sqmm, served with inner sheathing of PVC tape and over all PVC sheathed in service connection suspended by insulating hanges not more than 1 meter apart including 4mm suspension wire, one twin core cable flat or circular and including taking down old unserviceable wire complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing of surplus soil not exceeding 50 meter and deposited where directed at a level not exceeding 1.50 meter above the starting point complete all as specified and directed.

Material and labour for laying of bricks locally available sub-class 'B' brick (old size) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the directon of cable complete all as specified and directed.

Supply and spread sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. Note : Thickness of sand cushion after punning down will be measured and paid.

Material and labour GI tube light grade 40mm bore for pretection of UG Cable including dismantling of old unserviceable pipe complete all as specified and directed.

M&L Chemical earthing with copper pipe electrode 3 meter long having outer pipe dia 80mm and inner pipe dia 50mm duly filled with higly conductive and anti corrosive compound of required quantity having chemical composition Bentosite 40%, copper sulphate 20%, Gypsum 5%, Graphite 10%, Alum 5%, Zinc sulphate 10%, Aluminium sulphate 10% burried in ground by digging a bore of 150mm dia surrounded by soil friendly back fill compound non soluble in water including connection withgalvanised earth strip 32x6mm, making PCC pit of size 0.3m x 0.3m x 0.3m (inner size) in mix 1:3:6 type C1 with RCC 1:2:4 type B1, 40mm thick cover reinforced with 6mm dia MS bars 3 Nos both ways with lifting hook made out of 8mm dia bar and testing on completion to achieve value not more than 01 ohm complete all as specified and directed.

M&L for Aluminium strip 25 x 3.15mm with saddles and flxing screws etc for roof conductors and down conductors above ground as earth continuity conductor for mesh earthing or connection upto test point including dyna roof screw complete all as specified and directed.

M&L Air termination, single pointed, aluminium rod 12mm dia and 300mm long with necessary fixing arrengment complete all as specified and directed.

M&L Test point terminal block made of gun metal or phosphorous bronze size 75x75x25mm, drilled and screwed including 03 Nos dia 25mm long hexagonal head screw made of brass complete all as specified and directed.

M&L for Cement concrete in foundation filling and mass concrete type C2 1:3:6 (40mm graded aggregate) complete all as specified and directed.

M&L Tube 'light grade' galvanised of size 40mm bore with all fitting fixed as directed by Engr-in-Charge complete all as specified and directed.

m/s builders and suppliers

M/S. N.A.BARBHUIYA

M/S RAJU ENTERPRISES AND BROS

MS AFTAB LASKAR

M/S TAPAN KUMAR RAY

Younus Khan