Loading…
Loading…
Tender Value
₹1.8 Cr
EMD Value
₹1.8 L
Closing Date
18 Jun 2026, 6:00 pm
Executive Engineer R and B Division, Palanpur
Construction of Rest House Building at Deesa (Pro. Compound Wall, Campus Development & Other Misc work) Banaskantha Gujarat
311412
4 of 2026-27
Open
Civil - All
Banaskantha
15 documents required · 15 mandatory
₹3,600
Executive Engineer, R and B Division, Palanpur
₹1.8 L
4 Jun 2026
4 Jun 2026
4 Jun 2026
18 Jun 2026
4 Jun 2026
NAME OF WORK :- CONSTRUCTION OF RESTHOUSE BUILDIING AT DEESA,DIST -BANASKANTHA (pro compound wall , Campus devlopment & Misc work)
Quantity Item Description Unit Total Amount
Quantity Item Description Unit Total Amount
No. Rate in Figures Rate in Words
1 0.30 Clearing and grubbing road land including uprooting rank vegetation grass Hect 28455.09 Rupees Twenty Eight
bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees cut earlier and Thousand Four Hundred
disposal of unserviceable materials (C) By mechanical means in area of light jungle Fifty Five And Paise Nine
2 372.00 Excavation for foundation upto 1.5 m depth includingsorting out and stacking of useful Cum 268.92 Rupees Two Hundred
materials and disposing off the excavated stuff upto 50 Meter lead.(C) Hard Murrum Sixty Eight And Paise
Ninety Two Only
3 81.00 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of Cum 287.21 Rupees Two Hundred
useful materials and disposing off the excavated stuff upto 50 Meter lead.(C) Hard Murrum Eighty Seven And Paise
Twenty One Only
4 1328.00 Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness Cum 282.07 Rupees Two Hundred
including watering, ramming and consolidating etc. complete. Eighty Two And Paise
5 14.20 Providing and laying cement concrete 1:2:4 (1- Cement : 2Coarse sand : 4- graded stone Cum 3911.73 Rupees Three Thousand
aggregates 20 mm nominal size) and curing complete including cost of formwork in (A) Nine Hundred Eleven And
Foundation and Plinth Paise Seventy Three Only
6 122.00 Providing and laying cement concrete 1:3:6 (1- Cement :3- Coarse sand : 6- Graded brick bat Cum 3017.55 Rupees Three Thousand
aggregate 40mm normal size) and curing complete excluding cost of formwork in (A) Seventeen And Paise Fifty
Foundation and Plinth Five Only
7 56.00 Providing and laying in position control cement concrete mix M-250 grade for reinforced Cum 4479.35 Rupees Four Thousand
cement concrete work , using cement content as per approved design mix including pumping of Four Hundred Seventy
concrete to site of laying, cost of Centering , shutterings, finishing, grouting if required , Nine And Paise Thirty Five
admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of Only
concrete, improve workability as per direction of engineer in charge and approved , rates
includes all levels , heights as specified , excluding reinforcement : (A) Footing
8 121.00 Providing and laying in position control cement concrete mix M-250 grade for reinforced Cum 8119.7 Rupees Eight Thousand
cement concrete work , using cement content as per approved design mix including pumping of One Hundred Nineteen
concrete to site of laying, cost of Centering , shutterings, finishing, grouting if required , And Paise Seventy Only
admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of
concrete, improve workability as per direction of engineer in charge and approved , rates
includes all levels , heights as specified , excluding reinforcement .rates for centering,
shuttering, formwork staging scaffolding work considering for RCC WALL for GROUND FLOOR
Quantity Item Description Unit Total Amount
Quantity Item Description Unit Total Amount
No. Rate in Figures Rate in Words
9 16.00 Providing and laying in position control cement concrete mix M-250 grade for reinforced cum 7812.1 Rupees Seven Thousand
cement concrete work , using cement content as per approved design mix including pumping of Eight Hundred Twelve
concrete to site of laying, cost of Centering , shutterings, finishing, grouting if required , And Paise Ten Only
admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of
concrete, improve workability as per direction of engineer in charge and approved , rates
includes all levels , heights as specified , excluding reinforcement .rates for centering,
shuttering, formwork staging scaffolding work considering for Column FOR Ground Floor
10 13.00 Providing and laying in position control cement concrete mix M-250 grade for reinforced Cum 6301.39 Rupees Six Thousand
cement concrete work , using cement content as per approved design mix including pumping of Three Hundred One And
concrete to site of laying, cost of Centering , shutterings, finishing, grouting if required , Paise Thirty Nine Only
admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of
concrete, improve workability as per direction of engineer in charge and approved , rates
includes all levels , heights as specified , excluding reinforcement .rates for centering,
shuttering, formwork staging scaffolding work in Plinth Beam .
11 11.00 Providing and laying in position control cement concrete mix M-250 grade for reinforced Cum 6317.55 Rupees Six Thousand
cement concrete work , using cement content as per approved design mix including pumping of Three Hundred Seventeen
concrete to site of laying, cost of Centering , shutterings, finishing, grouting if required , And Paise Fifty Five Only
admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of
concrete, improve workability as per direction of engineer in charge and approved, rates
includes all levels , heights as specified , excluding reinforcement .rates for centering,
shuttering, formwork staging scaffolding work considering for Lintel for GF
12 18290.00 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and kg 77.28 Rupees Seventy Seven
placing in position complete upto floor two level And Paise Twenty Eight
13 3.00 Brick work using common burnt clay building bricks having crushing strength not less than 35 Cum 4214.32 Rupees Four Thousand
kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6. (1- Cement : 6 -fine sand)(B) Two Hundred Fourteen
Conventional Up to plinth Level And Paise Thirty Two Only
14 136.00 Brickwork using common burnt Clay building bricks having crushing strength not less than 35 Cum 4496.04 Rupees Four Thousand
kg./Sq.Cm. in superstructure above plinth level upto floor two level (B) Conventional 1:6. (1- Four Hundred Ninety Six
Cement : 6 -fine sand) GROUND FLOOR And Paise Four Only
Quantity Item Description Unit Total Amount
Quantity Item Description Unit Total Amount
No. Rate in Figures Rate in Words
15 1229.00 Providing 20 mm thick double coat mala cement plaster on interior brick /concrete work for Smt 283.95 Rupees Two Hundred
plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Cement : Eighty Three And Paise
4 coarse sand) in roughfinishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Ninety Five Only
Coarse sand) finished with trovel including scaffolding curing etc. complete.
16 2199.00 Finishing wall with weather proof exterior acrylic emulsion paint on wall surface (two coats) to Smt 73.83 Rupees Seventy Three
give an required shape even shade after thoroughly brushing the surface to remove all dirt, and And Paise Eighty Three
remains of loose powdered materials.etc complete olour and shade approved by architecture. Only
17 1326.00 Providing and applying 2mm thick Texture Plaster of Earthen Textures, Travertino Texture, Coral Smt 603.98 Rupees Six Hundred Three
texture or equivalent make incorporating fine filaments made of polymer and aggregating And Paise Ninety Eight
natural stone powder with making grooves on existing base coat of 20 mm thick smooth mala Only
plaster etc. Complete Exterior weather proof two coat paint in any shade as approved by
Architect/ Engineer in charge for all floor all height.
18 458.00 GRC WORK : Providing & fixing architectural moldings profiles and other decorative elements Smt 5977.18 Rupees Five Thousand
made out of GRC (Glass Fibre reinforced Cement) in required shape, size & thickness all as per Nine Hundred Seventy
manufacturers specifications, such as all decorative articles should be made by using high Seven And Paise Eighteen
power spray machine, using AR Glass fiber with minimum ZrO2 16% including necessary Only
scaffoldings for all heights, as per approved drawings and reference images. GRC elements
thickness shall be 12-15 mm. fixing edges will be 4O TO 50 MM GRC Elements shall be fixed on
RCC Structure/Brick Work/ Primary Steel Structure (MS with protective coat of Red oxide/Zinc
Primer Shall be Used). Hilti make GI Screw Fastners or equvalent, GI Thread Rods and MS cleats
shall be used for fixing of GRC elements on RCC/MS Primary fabricated structure. Joints shall be
filled with PU sealants/ base material of GRC as and where required. The quote rate shall be
inclusive of all design, & shop drawing and sample mock of all elements approval from Architect
& consultant..Rate shall be inclusive of all required fabrication work for fixing only primary
strcure shall be provided as base structre only as per requirement. Mode and method of
measurement shall be in accordance with IS: 1200. Contractor shall submitt Shop drawing for
approval of Architect/ EIC before execution.
19 18.00 Demolition of Brick work and stone masonry including stacking of serviceable materilas and Cum 562.89 Rupees Five Hundred
disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar Sixty Two And Paise
Eighty Nine Only
Quantity Item Description Unit Total Amount
Quantity Item Description Unit Total Amount
No. Rate in Figures Rate in Words
20 270.00 Scraping oil paint from steel and other metal surface and making the surface even (with Hand Smt 51.78 Rupees Fifty One And
Scraping.) Paise Seventy Eight Only
21 1026.00 Removing and scraping of old deteriorated plaster of any thickness fromm wall / R.C.C member Smt 19.88 Rupees Nineteen And
including stacking of serviceable material and disposal of unserviceable from site of work with Paise Eighty Eight Only
all lead and lift
22 3750.00 Providing & fixing Steel work welded, in built up sections framed work including cutting, Kg 91.08 Rupees Ninety One And
hoisting, fixing in position and with one coat primer & two coat oil paint as per detail drawings Paise Eight Only
etc. complete. in columns, beams and joists, channels M.S. flat, Angles, Pipes, tees flats with
connecting plates or angle cleats STRUCTURAL STEEL
23 340.00 Cobble stone 60 mm thick ( 150 x 150 mm / 200 x 150 mm): Providing and laying of 60 mm smt 1499.85 Rupees One Thousand
thick (+10 mm) cobble stone in multi colour (Sand stone) as per approved sample by Four Hundred Ninety Nine
Architect/Client. Fixing with 25 mm thick cement mortar ( 1: 4) of thickness on PCC surface as And Paise Eighty Five Only
per detailed drawing. The joints of the stone shall be properly and firmly filled using properly
mixed mortar and joints shall be cleaned and well pointed using cement mortar. Work Including
levelling in proper line and level with using surface vibrator etc complete. including cost of all
type of tools, tackles, all labour, all type of materials, transportation, cleaning of surfaces, if
required protecting, for at all level, all depth, all Height, all lead and lift etc. work complete as
per the detailed drawing, approved sample, specifications and instruction of Architect/EIC.
Sample mock shall be approved from Architect/ Client. Material Test certificate shall be
submitted by the contractor. (Excluding PCC and RCC)
24 300.00 Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm rmt 374.92 Rupees Three Hundred
length,30cm height and 15cm thick of M250 grade concret as per approved design and Seventy Four And Paise
including excavation for fixing in proper line and level,filling the joint with C:M 1:3 Ninety Two Only
(1cement:3fine sand) etc complete.
25 420.00 Providing and supplying approved quality field soil from designated sources, including loading, Cmt 688.62 Rupees Six Hundred
transportation, and unloading at site. The soil shall be free from debris, stones, and organic Eighty Eight And Paise
impurities. Spreading of field soil in uniform layers at required locations, followed by mixing Sixty Two Only
with approved silt in specified proportions. The mixed material shall be properly leveled,
dressed to required slopes/levels, and lightly compacted by manual/mechanical means as
directed by the Engineer-in-Charge, complete in all respects.
Quantity Item Description Unit Total Amount
Quantity Item Description Unit Total Amount
No. Rate in Figures Rate in Words
26 280.00 Providing and supplying approved quality farm yard manure (well-decomposed), including Cmt 1238.06 Rupees One Thousand
loading, transportation, and unloading at site. Spreading the manure uniformly over the Two Hundred Thirty Eight
prepared surface in specified thickness, followed by thorough mixing with existing soil by And Paise Six Only
manual/mechanical means. The mixed material shall be leveled, dressed, and lightly watered if
required to achieve proper blending, all as directed by the Engineer-in-Charge, complete in all
27 335.00 Supplying well grown shrub plants of average height 3' to 4' and planting in 300x300x300mm Smt 1133.06 Rupees One Thousand
size pits by mixing of FYM & existing soil in ration 1:3 with soil, pesticide & insecticides. Plant One Hundred Thirty Three
should be disease free and fungus free 8"x10" polythene bag. Plastic bag or pots should be And Paise Six Only
removed carefully and soil around the roots should not be dropped or disturbed much. Bill shall
be placed after 45 days of plantation of shrubs. Mortality rates to be inclusive. Work shall be
done as shown in the drawing or as directed and approved by EIC/Architect. The ground
coverage should be dence and uniform throuout the planting area.
28 40.00 Supply and planting of tree of specified variety including excavation of pit 600x 600x600mm No 759.89 Rupees Seven Hundred
depth mixing of FYM & existing soil in ratio 1:3 termite treatment and planting of plants (height Fifty Nine And Paise
8' to 10' above bags/pots). Soil mounts 4'-8" in size. Tree plantation should be carried on neatly Eighty Nine Only
accurately and with perfection as per drawing and instruction given by EIC. Plastic bags or pots
should be removed carefully and soil around the roots should not be dropped or disturbed
much. Bill shall be placed after completion of maintenance period but not before stabilizing the
hedges. Rates for mortality to be inclusive. Providing and fixing tripod made of wooden ball,
height 1.5m. Top bracket to be 300x300mm leg embedded in ground up to 300mm and to have
tar coat. Work shall be done as shown in the drawing or as directed and approved by EIC.
29 2001.00 Providing and fixing approved quality carpet lawn (turf grass), including surface preparation by Smt 461.79 Rupees Four Hundred
clearing, leveling, and dressing of soil to required slopes. Laying of healthy, weed-free grass turf Sixty One And Paise
in close contact over the prepared surface, ensuring proper alignment and jointing. Light rolling Seventy Nine Only
and watering to ensure proper setting and root establishment. The lawn shall be maintained,
including regular watering, trimming, and replacement of damaged patches during the
establishment period, complete as directed by the Engineer-in-Charge.
Quantity Item Description Unit Total Amount
Quantity Item Description Unit Total Amount
No. Rate in Figures Rate in Words
30 335.00 Supply and planting box hedge shrub of average height 1' to 2' by providing and fixing FYM @ Smt 1133.06 Rupees One Thousand
rate of 0.06 cmt/pit with soil pesticide & insecticides. Plants shoud be disease free and fungus One Hundred Thirty Three
free in 6"x8" polythene bag. Plastic bags or pot should be removed carefully and soil around the And Paise Six Only
roots should not be dropped or disturbed much. Bill shall be placed after completion of
maintenance period but not before stabilizing the shrubs. Mortality rates to be inclusive. Work
shall be done as shown in the drawing or as directed and approved by EIC. The ground coverage
should be dense and uniform throughout the planting area.
31 50.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having mtr 660.58 Rupees Six Hundred Sixty
National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube And Paise Fifty Eight Only
fittings and clamps including making good the wall, ceiling and floor etc. complete. [F] 50mm.
32 70.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having mtr 447.72 Rupees Four Hundred
National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube Forty Seven And Paise
fittings and clamps including making good the wall, ceiling and floor etc. complete. [E] 40mm. Seventy Two Only
33 153.00 Providing and laying coloured glazed tiles of the size 450 mm x 600 mm x 8 mm / 600 mm x 600 SMT 1488.23 Rupees One Thousand
mm x 8 mm/Tiles Size Approved by Architect or EIC Before Execution the work in skirting, risers Four Hundred Eighty Eight
of steps and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with And Paise Twenty Three
white cement slurry as approved by architect. Only
34 123.00 Providing and laying 16-18 mm thick polished granite stone machine cut in single piece (Max. SMT 2847.35 Rupees Two Thousand
available) in sill and jambs of door ,window,ventilation & lift wall cladding, staircase flooring Eight Hundred Forty
landing, risers & treads, skirting laid over 10 mm thick cement mortar 1 : 3 (1 cement : 3 coarse Seven And Paise Thirty
sand) and jointed with grey cement slurry with matching pigment incl. rubbing and polishing, Five Only
half rounding edge and incl. fixing of hilty fastener at every 1/3 span of sill as required size etc.
complete colour and shed as approved by architect engineer in charge.
35 23.00 Providing and laying in position control cement concrete mix M-250 grade for reinforced cmt 6317.55 Rupees Six Thousand
cement concrete work , using cement content as per approved design mix including pumping of Three Hundred Seventeen
concrete to site of laying, cost of Centering , shutterings, finishing, grouting if required , And Paise Fifty Five Only
admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of
concrete, improve workability as per direction of engineer in charge and approved , rates
includes all levels , heights as specified , excluding reinforcement .rates for centering,
shuttering, formwork staging scaffolding work considering for Lintel for GF
Quantity Item Description Unit Total Amount
Quantity Item Description Unit Total Amount
No. Rate in Figures Rate in Words
36 443.00 Providing and laying 20mm thick stone stonecrete in laid over 20mm thick cement mortar 1: 3 smt 1393.8 Rupees One Thousand
(1 cement: 3 coarse sand) and jointed with grey cement slurry with matching pigment in Three Hundred Ninety
flooring complete as approved by architect engineer in charge. Three And Paise Eighty
37 10.00 Providing and fixing approved quality Ficus topiary plants of height 1.5 m to 1.8 m, of uniform each 18584 Rupees Eighteen
shape and healthy growth, free from pests and diseases. Preparing planting pits of required size, Thousand Five Hundred
filled with suitable soil mixture comprising garden soil, sand, and well-decomposed manure. Eighty Four Only
Placing the plant in position, maintaining proper alignment and spacing, followed by backfilling,
firming, and initial watering. Providing necessary staking/support for stability and ensuring
proper establishment. Maintenance including watering, pruning, and replacement of dead
plants during the defect liability period, complete as directed by the Engineer-in-Charge /
38 10.00 Providing and planting approved quality Ficus Golden Bush plants of height approximately 0.90 Each 290.88 Rupees Two Hundred
m, healthy, well-rooted, and free from pests and diseases. Preparing pits of required size and Ninety And Paise Eighty
filling with suitable soil mixture consisting of garden soil, sand, and well-decomposed manure. Eight Only
Placing plants in position with proper alignment and spacing, followed by backfilling, firming,
and initial watering. Ensuring proper leveling of surrounding area and providing necessary care
for establishment. Maintenance including regular watering, pruning, and replacement of dead
plants during the maintenance period, complete as directed by the Engineer-in-Charge /
39 10.00 Providing and planting approved quality Date Palm trees of height 3.00 m to 3.60 m, healthy, Each 9292 Rupees Nine Thousand
well-developed, and free from pests and diseases. Excavating planting pits of suitable size and Two Hundred Ninety Two
depth, and filling with a prepared mixture of good garden soil, sand, and well-decomposed Only
manure. Carefully placing the palm in position, maintaining proper alignment and verticality,
followed by backfilling and firm compaction. Providing necessary staking/support for stability
and forming watering basins around the plant. Initial watering shall be done immediately after
planting. Maintenance including regular watering, trimming of dry leaves, and replacement of
dead plants during the maintenance period, complete as directed by the Engineer-in-Charge /
Quantity Item Description Unit Total Amount
Quantity Item Description Unit Total Amount
No. Rate in Figures Rate in Words
40 10.00 Providing and planting approved quality Ficus Safari (Black) bush plants for hedge formation, of Each 464.6 Rupees Four Hundred
height 0.90 m to 1.20 m, healthy, dense, and free from pests and diseases. Preparing Sixty Four And Paise Sixty
continuous trenches/pits of required size along the alignment, filled with suitable soil mixture Only
comprising garden soil, sand, and well-decomposed manure. Placing plants at uniform spacing
in proper line and level to achieve a neat hedge profile, followed by backfilling, firming, and
initial watering. Providing necessary staking/support if required. Regular maintenance including
watering, trimming for desired shape, and replacement of dead plants during the maintenance
period, complete as directed by the Engineer-in-Charge / Architect.
41 10.00 Providing and planting approved quality Bismarckia Palm of height 2.40 m to 3.00 m, well- Each 6388.25 Rupees Six Thousand
grown, symmetrical, and free from pests and diseases. Excavating planting pits of suitable size Three Hundred Eighty
and depth, and filling with a prepared mixture of good garden soil, sand, and well-decomposed Eight And Paise Twenty
manure. Carefully positioning the palm to maintain proper alignment and verticality, followed Five Only
by backfilling and firm compaction. Providing necessary staking/support to protect against wind
and ensure stability. Forming watering basins and carrying out initial watering immediately after
planting. Maintenance including regular watering, removal of dry leaves, and replacement of
dead plants during the maintenance period, complete as directed by the Engineer-in-Charge /
42 1.00 Designing, providing, fixing & erection STONE FOUNTAIN complete inclusive of all material, job 275275.5 Rupees Two Lakh(s)
labor, wastages, necessary tools & tackles, adhesives, required hardware, accessories, Carving, Seventy Five Thousand
Any type of framing work as per required, Necessary civil work if required, foundation if Two Hundred Seventy
required as per design, ligting if required and work complete including all type of material, Five And Paise Fifty Only
fittings, fixtures, Finish, loading, unloading, transporation, all leads, accessories, all floor, all
levels, all heights etc. complete as per drawings, specifications & instruction of
Client/EICProviding & Fixing Street Decor Stone Fountain Garden as per given drawing details
and approved By engineer In charge / Architect Supplying, installing, testing, and commissioning
of submersible/centrifugal fountain pump of approved make and suitable capacity, complete
with suction and delivery connections, foot valve, NRV, and necessary fittings for smooth
Providing and installing weatherproof electrical control panel fabricated from powder-coated
MS enclosure, comprising MCB, RCCB/ELCB, contactor, overload relay, timer/auto controller,
selector switches, and indicating lamps, complete as required for safe operation of fountain
Quantity Item Description Unit Total Amount
Quantity Item Description Unit Total Amount
No. Rate in Figures Rate in Words
43 6.00 Designing, providing, fixing & erection benches complete inclusive of all material, labor, Job 29618.25 Rupees Twenty Nine
wastages, necessary tools & tackles, adhesives, required hardware, accessories, Carving, Any Thousand Six Hundred
type of framing work as per required, Necessary civil work if required, foundation if required as Eighteen And Paise
per design, ligting if required and work complete including all type of material, fittings, fixtures, Twenty Five Only
Finish, loading, unloading, transporation, all leads, accessories, all floor, all levels, all heights etc.
complete as per drawings, specifications & instruction of Client/EIC. Sitting Type 1: Providing &
placing Precast Concrete with wooden bench as per ref images or drawing. Material: Precast
Concrete with wooden backrest & bench top : 3000 mm length x 1000 x 750 mm
44 1.00 Providing and erecting WPC (Wood Plastic Composite) gazebo of approved design, size, and Job 708515 Rupees Seven Lakh(s)
shape, using high-quality WPC members for columns, beams, rafters, and louvers, having Eight Thousand Five
natural wood finish and resistant to moisture, termites, rot, and UV exposure. The structural Hundred Fifteen Only
framework shall be designed to withstand wind load and environmental conditions, with
necessary MS/steel inserts or supports wherever required, duly treated with anti-corrosive
coating and finished as per specifications. The roofing shall be WPC slats/louvers or
polycarbonate/solid sheet (as specified), fixed with stainless steel fasteners, brackets, and
hardware of approved make. The work shall include fabrication, supply, transportation,
erection, alignment, anchoring to RCC/finished surface using chemical/anchor fasteners,
finishing edges, sealing joints, and making good surrounding surfaces. All components shall be
factory finished and installed as per manufacturer’s specifications and as directed by the
Architect/Engineer-in-Charge, complete in all respects including necessary scaffolding, labour,
tools, and tackles. as approved by EIC/ Architect. 15 ' X 15 ' SIZE
45 4800.00 Providing & fixing Steel work welded, in built up sections framed work including cutting, kg 91.08 Rupees Ninety One And
hoisting, fixing in position and with one coat primer & two coat oil paint as per detail drawings Paise Eight Only
etc. complete. in columns, beams and joists, channels M.S. flat, Angles, Pipes, tees flats with
connecting plates or angle cleats STRUCTURAL STEEL and 'Providing fusion bonded Epoxy
coating not less than 175 micron thickness and up to 300 micron to reinforcemenT bars as per
IS-13620-1993/ASTM-775 M including testing of coating at plant
Quantity Item Description Unit Total Amount
Quantity Item Description Unit Total Amount
No. Rate in Figures Rate in Words
46 149.00 Grass Paver block (600 x 400 mm ) Providing and laying shot blasted interlocking/ Non- smt 1347.34 Rupees One Thousand
interlocking grey/non colored grass paver blocks of high density 80 mm thick M-40 grade of Three Hundred Forty
Alcock, Vyara, Nitco or equivalent as per approved make for parking areas, service Seven And Paise Thirty
lanes,Pathways and other areas as mentioned in the drawing. Including providing and laying 50 Four Only
to 80 mm thick average bedding layer of coarse sand below paver block as per required grading
and specification and 40 mm thick average FYM Soil filling as required and Specification and aslo
including Suppying and Planting Specified Carpet lown as required and Specification and Laid
paver block shall be mechanically compacted. The work of the bpaving blocks shall be executed
in line and level by skilled mason of flooring work only. Cutting of paver block by machine cut
only and laying to be done by skilled flooring mason. The Finished surface of the Paver Block
shall have Coarse Sand Texture Finish. Paver blocks shall be compacted and shall be relaid if
47 173.00 Roofing Shingles: Providing and fixing of 3.1 mm thick Premium Series SBS (Styrene Butadiene smt 1625.09 Rupees One Thousand Six
Styrene) make Laminated Roofing Shingles with SBS (Styrene Butadiene Styrene) make fiber Hundred Twenty Five And
glass non-woven polypropylene roof underlayment (Waterproofing membrane) as per approved Paise Nine Only
make and sample by Architect. Fixed on exisitng fiber cement board/slab with necessary
accessories required like silicone, ridges, starter strip, nails or screw, adhesive, installation,
fittings, fixtures, scaffolding, at any level any height etc., complete as per drawing and
instruction of Architect/ EIC. EN 544– 4E2 Asphalt shingles combined with Glass felt and
surfaced with Mineral granules ENISO 11925-2 Class E Fire Resistance For 110 KMPH wind
resistance UL (Under Writers Lab) certification for all the above. Material Test certificate and
warranty shall be submitted by the contractor. Roofing surface area shall be measured for
payment. No extra payment shall be paid for overlapping of shingles.
48 173.00 Supply and Fixing of moisture and fire resistant 16 mm thick Anti Aqua Fiber Cement sheet smt 1045.35 Rupees One Thousand
board as per approved make & Sample . Fixing on over fabrication work with necessary nails, Forty Five And Paise
screws, joinery fill with silicone sealant, adhesive, accessories, fittings, fixtures,scaffolding, any Thirty Five Only
level,any height etc complete as per drawing and instruction of Architect/EIC.
49 66.00 Providing and laying compacted W.B.M. 125,mm compacted thick of machine crushed CMT 1307.95 Rupees One Thousand
B.T.,Metal of size 40 MM to 63 MM with using 20%, stone screenings (Grit ) and stone dust as Three Hundred Seven And
,filler including spreading , watering and ,consolidation by vibratory roller etc. complete. Paise Ninety Five Only
Quantity Item Description Unit Total Amount
Quantity Item Description Unit Total Amount
No. Rate in Figures Rate in Words
50 79.00 Construction of un-reinforced, dowel jointed M-250, plain cement concrete pavement over a CMT 4861.13 Rupees Four Thousand
prepared sub base with 53 grade cement, coarse and fine aggregate conforming to IS 383, Eight Hundred Sixty One
maximum size of coarse aggregate not exceeding 25 mm, mixed in a b laid with a fixed form And Paise Thirteen Only
spread, compacted and finished admixtures as approved, concrete surface hardner, curing
compound, finishing to lines and grades as per drawing
51 1026.00 Providing and applying heritage plaster work as per approved sample and as directed by the smt 929.2 Rupees Nine Hundred
Architect / Engineer-in-Charge, including preparation of surface, hacking and cleaning of Twenty Nine And Paise
existing substrate, removing loose materials, and ensuring proper bonding. The work shall be Twenty Only
executed using approved mix proportions (lime-based / cement-lime / special heritage mix as
specified), applied in layers to achieve the desired thickness, texture, and traditional finish
matching heritage aesthetics. The plaster shall be carefully finished to replicate the approved
sample in terms of color, texture, patterns, and workmanship. The process includes curing,
protection from damage, scaffolding, tools, and all necessary labor, materials, and equipment
required to complete the work in all respects. The finished surface shall be uniform, crack-free,
and true to line, level, and heritage character as approved.
52 15.00 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene pipes Mtr 280.23 Rupees Two Hundred
of the following outside Dia. Low densidy, complete with special falnge compression type Eighty And Paise Twenty
fittings, wall clipsetc. including making good the wall ceiling and floor.(F) 75mm Three Only
53 25.00 Providing, laying, and jointing 63 mm diameter PVC pipes conforming to IS 4985 of 6 kg/cm² Mtr 114.41 Rupees One Hundred
pressure class, including supplying and fixing of PVC fittings of 10 kg/cm² pressure rating such as Fourteen And Paise Forty
bends, tees, reducers, couplers, unions, flanges, end caps, etc., complete in all respects as per One Only
approved drawings and direction of Engineer-in-charge.
54 100.00 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes Mtr 175.38 Rupees One Hundred
of the following outside Dia. Low densidy, complete with special falnge compression type Seventy Five And Paise
fittings, wall clipsetc. including making good the wall ceiling and floor.(E) 50mm Thirty Eight Only
55 100.00 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes Mtr 145.98 Rupees One Hundred
of the following outside Dia. Low densidy, complete with special falnge compression type Forty Five And Paise
fittings, wall clipsetc. including making good the wall ceiling and floor.(D) 40mm Ninety Eight Only
56 30.00 Providing, laying, and jointing 2" (50 mm nominal bore) PVC pipes conforming to ASTM D1785 Mtr 542.26 Rupees Five Hundred
(Schedule 40), including supply and fixing of PVC fittings of Schedule 80 rating such as elbows, Forty Two And Paise
tees, reducers, couplers, unions, flanges, end caps, etc., complete in all respects as per Twenty Six Only
approved drawings and direction of Engineer-in-charge.
Quantity Item Description Unit Total Amount
Quantity Item Description Unit Total Amount
No. Rate in Figures Rate in Words
57 6.00 Providing, laying, and jointing 2½" (65 mm nominal bore) PVC pipes conforming to ASTM D1785 Mtr 542.26 Rupees Five Hundred
(Schedule 40), including supply and fixing of PVC fittings of Schedule 80 rating such as elbows, Forty Two And Paise
tees, reducers, sockets, unions, flanges, end caps, etc., complete in all respects as per approved Twenty Six Only
drawings and direction of Engineer-in-charge.
58 5.00 Providing, installing, testing, and commissioning of jet type rotor pop-up sprinkler with 4" (100 No. 1023.38 Rupees One Thousand
mm) pop-up riser height and coverage up to 36 feet (approx. 11 m) radius, suitable for Twenty Three And Paise
landscape irrigation systems, complete with all necessary accessories as per approved drawings Thirty Eight Only
and direction of Engineer-in-charge.
59 5.00 Providing, installing, testing, and commissioning of multi-jet spray type pop-up sprinkler having No. 479.34 Rupees Four Hundred
4" (100 mm) pop-up riser height with coverage up to 18 feet (approx. 5.5 m) radius, suitable for Seventy Nine And Paise
lawn and landscape irrigation, complete with all required accessories as per approved drawings Thirty Four Only
and direction of Engineer-in-charge.
60 5.00 Providing, supplying, installing, testing, and commissioning of ½" (15 mm) pop-up sprinkler No. 182.4 Rupees One Hundred
connecting swing joint assembly consisting of four elbow configuration, made of UV-resistant Eighty Two And Paise
engineering plastic/PVC, suitable for irrigation systems, complete with all necessary Forty Only
components as per approved drawings and direction of Engineer-in-charge.
61 5.00 Providing, supplying, installing, testing, and commissioning of impact type jet spray mini No. 790.07 Rupees Seven Hundred
sprinkler having coverage up to 30 feet (approx. 9 m) radius with adjustable arc setting, Ninety And Paise Seven
complete with riser pipe and connecting assembly, suitable for lawn and landscape irrigation Only
systems, as per approved drawings and direction of Engineer-in-charge.
62 30.00 Providing, supplying, installing, testing, and commissioning of PP/HDPE service saddles of No. 165.66 Rupees One Hundred
varying outlet sizes such as ½" (15 mm), ¾" (20 mm), etc., suitable for tapping from main Sixty Five And Paise Sixty
pipeline, complete with all accessories as per approved drawings and direction of Engineer-in- Six Only
63 150.00 Providing, supplying, laying, jointing, testing, and commissioning of 16 mm diameter plain LLDPE Mtr 12.72 Rupees Twelve And Paise
(Linear Low-Density Polyethylene) drip irrigation polytube, UV stabilized, suitable for drip Seventy Two Only
irrigation systems, complete with all necessary fittings and accessories as per approved
drawings and direction of Engineer-in-charge.
64 150.00 Providing, supplying, laying, jointing, testing, and commissioning of 12 mm diameter plain LLDPE Mtr 9.54 Rupees Nine And Paise
(Linear Low-Density Polyethylene) drip irrigation polytube, UV stabilized, suitable for drip Fifty Four Only
irrigation systems, complete with all necessary fittings and accessories as per approved
drawings and direction of Engineer-in-charge.
Quantity Item Description Unit Total Amount
Quantity Item Description Unit Total Amount
No. Rate in Figures Rate in Words
65 150.00 Providing, supplying, laying, jointing, testing, and commissioning of 16 mm diameter LLDPE Mtr 14.84 Rupees Fourteen And
(Linear Low-Density Polyethylene) drip irrigation polytube with UV stabilization, having factory- Paise Eighty Four Only
fitted inbuilt emitters of 2 LPH discharge at 40 cm spacing, suitable for landscape and
horticulture irrigation systems, complete with all necessary fittings and accessories as per
approved drawings and direction of Engineer-in-charge.
66 150.00 Providing, supplying, laying, jointing, testing, and commissioning of 12 mm diameter LLDPE Mtr 11.66 Rupees Eleven And Paise
(Linear Low-Density Polyethylene) drip irrigation polytube with UV stabilization, having factory- Sixty Six Only
fitted inbuilt emitters of 2 LPH discharge at 40 cm spacing, suitable for landscape and
horticulture irrigation systems, complete with all necessary fittings and accessories as per
approved drawings and direction of Engineer-in-charge.
67 150.00 Providing, supplying, laying, jointing, testing, and commissioning of 20 mm diameter plain LLDPE Mtr 23.33 Rupees Twenty Three And
(Linear Low-Density Polyethylene) drip irrigation polytube, UV stabilized, suitable for drip Paise Thirty Three Only
irrigation systems, complete with all required fittings and accessories as per approved drawings
and direction of Engineer-in-charge.
68 150.00 Providing, supplying, laying, jointing, testing, and commissioning of 32 mm diameter plain LLDPE Mtr 69.99 Rupees Sixty Nine And
(Linear Low-Density Polyethylene) drip irrigation polytube, UV stabilized, suitable for drip Paise Ninety Nine Only
irrigation systems, complete with all required fittings and accessories as per approved drawings
and direction of Engineer-in-charge.
69 60.00 Providing, supplying, installing, testing, and commissioning of button type openable dripper No. 9.54 Rupees Nine And Paise
having 4 LPH discharge, of approved make such as Jain Irrigation, suitable for drip irrigation Fifty Four Only
systems, complete with all required accessories as per approved drawings and direction of
Engineer-in-charge.
70 120.00 Providing, supplying, installing, testing, and commissioning of polyethylene (PE) connectors and No. 12.72 Rupees Twelve And Paise
fittings of sizes 12 mm, 16 mm, and 20 mm, including adapters, grommets, take-offs, joiners, Seventy Two Only
elbows, end stops, tees, reducers, etc., suitable for drip and micro-irrigation systems, complete
in all respects as per approved drawings and direction of Engineer-in-charge.
71 15.00 Providing, supplying, installing, testing, and commissioning of 32 mm diameter polyethylene No. 68.93 Rupees Sixty Eight And
(PE) connectors and fittings including adapters, joiners, elbows, tees, reducers, end stops, etc., Paise Ninety Three Only
suitable for drip/micro-irrigation sub-main lines, complete in all respects as per approved
drawings and direction of Engineer-in-charge.
72 15.00 Providing, supplying, and fixing of lateral holding stakes made from 8 mm diameter galvanized No. 15.49 Rupees Fifteen And Paise
iron (GI) wire, 8 inches (200 mm) long, used for securing drip irrigation laterals in position, Forty Nine Only
complete in all respects as per approved drawings and direction of Engineer-in-charge.
Quantity Item Description Unit Total Amount
Quantity Item Description Unit Total Amount
No. Rate in Figures Rate in Words
73 1.00 Providing, supplying, installing, testing, and commissioning of 63 mm dia PVC ball valve (double No. 1569.54 Rupees One Thousand
union type) including all necessary fittings and accessories, suitable for irrigation/water supply Five Hundred Sixty Nine
systems, complete in all respects as per approved drawings and direction of Engineer-in-charge. And Paise Fifty Four Only
74 2.00 Providing, supplying, installing, testing, and commissioning of 50 mm dia PVC ball valve (double No. 1187.76 Rupees One Thousand
union type) including all necessary fittings and accessories, suitable for irrigation/water supply One Hundred Eighty
systems, complete in all respects as per approved drawings and direction of Engineer-in-charge. Seven And Paise Seventy
75 5.00 Providing, supplying, installing, testing, and commissioning of 32 mm dia PP compression joint No. 593.88 Rupees Five Hundred
ball valve, including all required fittings and accessories, suitable for HDPE/LLDPE pipeline Ninety Three And Paise
systems, complete in all respects as per approved drawings and direction of Engineer-in-charge. Eighty Eight Only
76 5.00 Providing, supplying, installing, testing, and commissioning of 1¾" dia uPVC ball valve, including No. 1138.16 Rupees One Thousand
all required fittings and accessories such as tees, reducers, adapters, couplers, unions, etc., One Hundred Thirty Eight
suitable for water supply/irrigation pipelines, complete in all respects as per approved drawings And Paise Sixteen Only
and direction of Engineer-in-charge.
77 2.00 Providing, supplying, installing, testing, and commissioning of 1" dia continuous acting air No. 943.84 Rupees Nine Hundred
release valve, suitable for water supply/irrigation pipeline systems, complete with all required Forty Three And Paise
fittings and accessories as per approved drawings and direction of Engineer-in-charge. Eighty Four Only
78 4.00 Providing, supplying, installing, testing, and commissioning of PVC/HDPE service saddles suitable No. 411.17 Rupees Four Hundred
for main pipeline sizes such as 90 mm, 75 mm, 63 mm, etc., complete with outlet provision and Eleven And Paise
all necessary accessories, for taking service connections from main lines, as per approved Seventeen Only
drawings and direction of Engineer-in-charge.
79 1.00 Providing, supplying, installing, testing, and commissioning of screen filter unit with header No. 8436.27 Rupees Eight Thousand
assembly having 3" (80 mm) inlet and outlet and flow capacity of 45 cubic meters per hour, Four Hundred Thirty Six
complete with all required fittings and accessories, suitable for irrigation/water filtration And Paise Twenty Seven
systems, as per approved drawings and direction of Engineer-in-charge. Only
80 1.00 Providing, supplying, installing, testing, and commissioning of 2" dia hydraulic pilot operated Nos 20573.7 Rupees Twenty Thousand
pressure release valve, complete with all necessary fittings, pilot assembly, and accessories, Five Hundred Seventy
suitable for irrigation/water supply systems, as per approved drawings and direction of Three And Paise Seventy
Engineer-in-charge. Only
81 1.00 Providing, supplying, installing, testing, and commissioning of 3" dia Non-Return Valve (NRV) to No. 2433.84 Rupees Two Thousand
prevent backflow in pipeline systems, complete with all necessary fittings, accessories, and Four Hundred Thirty
connections, as per approved drawings and direction of Engineer-in-charge. Three And Paise Eighty
Quantity Item Description Unit Total Amount
Quantity Item Description Unit Total Amount
No. Rate in Figures Rate in Words
82 250.00 Excavation of trench and backfilling for laying of PVC pipelines in all types of soil, with trench Mtr 58.39 Rupees Fifty Eight And
depth ranging from 200 mm to 250 mm, including all necessary operations, complete in all Paise Thirty Nine Only
respects as per approved drawings and direction of Engineer-in-charge.
83 2.00 Providing, supplying, installing, testing, and commissioning of 2" dia butterfly valve, complete No 3183.52 Rupees Three Thousand
with all necessary fittings, accessories, and assembly components, suitable for water One Hundred Eighty
supply/irrigation pipeline systems, as per approved drawings and direction of Engineer-in- Three And Paise Fifty Two
84 1.00 Providing, supplying, installing, testing, and commissioning of 2 HP water pump set complete Set 37184.16 Rupees Thirty Seven
with starter control panel, electrical cables, and all necessary fittings & accessories, suitable for Thousand One Hundred
irrigation/water supply applications, as per approved drawings and direction of Engineer-in- Eighty Four And Paise
charge. Sixteen Only
85 60.00 Providing, supplying, laying, jointing, testing, and commissioning of 50 mm diameter HDPE pipe Mtr 196.64 Rupees One Hundred
of 6 kg/cm² pressure rating, including supply and fixing of GI nipples and necessary fittings & Ninety Six And Paise Sixty
accessories, complete in all respects as per approved drawings and direction of Engineer-in- Four Only
86 1.00 Providing, supplying, installing, testing, and commissioning of a complete fogging/misting Set 50500 Rupees Fifty Thousand
system for tunnel/greenhouse applications, comprising foggers (mist nozzles), uPVC pipeline, Five Hundred Only
LLDPE laterals, filtration unit, and all necessary fittings & connecting assemblies, complete in all
respects as per approved drawings and direction of Engineer-in-charge.
87 300.00 Providing, supplying, laying, jointing, testing, and commissioning of 16 mm diameter lateral pipe Mtr 13.07 Rupees Thirteen And
made of LLDPE/LDPE, suitable for drip/micro-irrigation systems, complete with all necessary Paise Seven Only
fittings and accessories as per approved drawings and direction of Engineer-in-charge.
88 2.00 Providing, supplying, installing, testing, and commissioning of 75 mm dia PVC flush valve, of Nos 130.29 Rupees One Hundred
approved make and design, complete with all necessary fittings, accessories, and connections, Thirty And Paise Twenty
as approved by the Engineer-in-charge. Nine Only
89 2.00 Providing, supplying, installing, testing, and commissioning of 75 mm dia PVC ball valve, of Nos 1616 Rupees One Thousand Six
approved make and design, complete with all necessary fittings, accessories, and connections, Hundred Sixteen Only
as approved by the Engineer-in-charge.
90 10.00 Providing, supplying, laying, jointing, testing, and commissioning of 90 mm dia PVC pipes Mtr 257.55 Rupees Two Hundred Fifty
conforming to IS 4985 of 6 kg/cm² pressure class, including supply and fixing of all necessary Seven And Paise Fifty Five
fittings and accessories such as tees, elbows, bends, junctions, reducers, couplers, etc., Only
complete in all respects as required/directed at site and approved by the Engineer-in-charge.
Quantity Item Description Unit Total Amount
Quantity Item Description Unit Total Amount
No. Rate in Figures Rate in Words
91 5.00 Providing, supplying, installing, testing, and commissioning of gear-driven pop-up sprinkler Nos 4297.55 Rupees Four Thousand
having 5" pop-up height (from bottom to centre of discharging nozzle) with adjustable coverage Two Hundred Ninety
radius from 12 m to 24 m, complete with flow shut-off device, SOD cup, check valve, slip clutch Seven And Paise Fifty Five
mechanism, and required interchangeable nozzle, of approved make such as Rain Bird / Toro / Only
Nelson Irrigation, as per approved drawings and direction of Engineer-in-charge.
92 5.00 Providing, supplying, installing, testing, and commissioning of gear-driven pop-up sprinkler Nos 1452.38 Rupees One Thousand
having 5" pop-up height (from bottom to centre of discharging nozzle) with adjustable coverage Four Hundred Fifty Two
radius from 8 m to 16 m, complete with inbuilt check valve, slip clutch mechanism, and required And Paise Thirty Eight
interchangeable nozzle, of approved make such as Rain Bird / Toro / Nelson Irrigation, as per Only
approved drawings and direction of Engineer-in-charge.
93 5.00 Providing, supplying, installing, testing, and commissioning of 2" dia PVC union valve, of Nos 555.5 Rupees Five Hundred Fifty
approved make and design, complete with all necessary fittings, accessories, and connections, Five And Paise Fifty Only
as approved by the Engineer-in-charge.
Quantity Item Description Unit Total Amount
Quantity Item Description Unit Total Amount
No. Rate in Figures Rate in Words
l/We am/are willing to carry out the work at
% above/below percent ( should be written in figurs and words ) of theestimated rates mentoined above . Amount of
Estimate amount Estimate a mount
Put to tender Rs Put to tender Rs..........
Deduct:................7obe1ow Rs
ln Words: Rupees One Crore Seventy six Lacks Thirty Five Thousand Seven Hundred Seve Seven and P aise Fifty Six Only
1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-ln-Cha rge for which no extra payment shall be
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
GST and lncome tax TDS will be deducted at a source while making payments of bills
4 ln all R.C.C. ltems in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-1O/2O17 Cement Consumplion/L,/C Date:l1/05/2017 as
stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from
the rate of original item at the rate of input rate mentioned in all the tender.
Quantity, rates & working of items are as per estimates and calculation in the schedule "8" are arithmetically checked and found correct.
Deputy ve Engineer Ex utive Engineer
(R & B) Sub Division & B ) Division
Palanpur Palanpur
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
1 SBD Rest house Deesa_Part1.pdf
2 SBD Rest house Deesa_Part2.pdf
3 SBD Rest house Deesa_Part3.pdf
4 GR.pdf
5 SCHEDULE B (1).pdf
6 Specification Index (1).pdf
7 CIVIL SPECIFICATION.pdf
8.1 12 1 . BUILDING SPECIFICATION PART-I.pdf
8.2 12 2 BUILDING SPECIFICATION PART-II.pdf
8.3 12-3. BUILDING SPECIFICATION PART-III.pdf
8.4 12-4. BUILDING SPECIFICATION PART-IV.pdf
9 Test Shedule.pdf
10 DRAWING.pdf
Download all tender documents and submit your bid