Repairing of Staff Quarters (Providing & Laying Tiles, Door frame, Plumbing work & Other work) (Part-IV) (State Govt. Renovation Grant 2016-2017)

NAME OF WORK:- REPAIRING OF STAFF QUARTERS (PROVIDING & LAYING TILES, DOOR FRAME,

PLUMBING WORK, & OTHER WORK)(PART-IV) (STATE GOVT. RENOVATION GRANT 2016-17)

r UNIT Rate AMOUNT (

(upto ITEM DESCRIPTION (upto 50 ( Upto 2 Upto

200 characters) Decimals ) Decimals )

Dismentaling tiled of stone floors, and wall dado laid in mortar including

1 stacking of serviceable materilas and disposal of unserviceable materials with all 145.00 Sqmt 31.18

Demolition of Brick work and stone masonry including stacking of serviceable

2 materilas and disposal of unserviceable materials with all lead and lift.(ii) In 11.55 cu.m 357.39

Dismentling doors, windows, ventilators, m.s grills etc. (wood or steel) shutters

3 including chowkhats architraves, holdfasts and other attachment etc. complete 6.00 Sqmt 121.96

and stacking them within all lead and lift.(i) Not exceeding 3 Sq.M. in area.

Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes , drainage pipes,

4 water supply pipes with fittings and clamps including stacking the materials with 108.00 Rmt 48.96

all lead and lift ( for any dia, of pipe)

Dismantling santtary fittings like wash basin . W.C. pan Indian and European

type, flushing tank etc. including stacking the materials with all lead and lift.

Removing and scraping of old deteriorated plaster of any thickness fromm wall /

6 R.C.C member including stacking of serviceable material and disposal of 220.00 Sqmt 12.63

unserviceable from site of work with all lead and lift

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4-

7 graded stone aggregates 20 mm nominal size) and curing complete excluding cost 8.36 cu.m 3454.80

of formwork in (A) Foundation and Plinth

Brick work using common burnt clay building bricks having crushing strength not

less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1-

8 Cement 11.20 cu.m 3741.29

: 5 -fine sand)(B) Conventional + Extra for brick work in superstructure above

plinth level up to floor two level (B) Conventional

(i) Half brick masonry in common brunt clay building bricks having crushing

strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse

sand ) in foundation and plinth (B) Conventional +Extra for half brick masonry in

superstructure above plinth level up to floor two level. (B) Conventional

CHICKEN MESH: providing and fixing16X 24 - GI chicken wire mesh (PLASTER

MESH OF AMAX INTERNATIONAL) at the junction of masonry work and RCC work

10 or on any other place as directed to receive plaster including fixing with galvanized 165.00 Sqm 121.20

nails, raw plugs at all heights plinth level- including scaffolding etc complete as

10MM PLASTER : Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering up to floor two level and finished even

11 and smooth in (i)Cement mortar 1:3 (1-cement:3-sand)+Extra over items 58 to 71 240.00 Sqm 153.83

for plastering on ceilings and soffits of stairs up to floor two level instead of

plastering on walls.

KEEN ARCHITECT,

CHEMISTRY BUILDING MEHSANA

r UNIT Rate AMOUNT (

(upto ITEM DESCRIPTION (upto 50 ( Upto 2 Upto

200 characters) Decimals ) Decimals )

CHEMICAL PLASTER:-Providing 10mm thick cement

plaster in single coat mixed with Waterproofing chemical -

additive in mortars: 1 part Keraplast Eco P6 : 3 parts

cement Mortars to repair plasters/renders and cracks:

damp the surface and apply a coat of modified mortar on

the previously cleaned surface.

If required, a dash-bond coat can be applied to promote

better adhesion.

Cleaning Tools and surfaces covered with residues of

slurry or mortar with additives should be cleaned with

water before they harden. after Removing and sacapping

of old deterioted plaster of any thickness from wall /

R.C.C member including stacking of serviceable material

and disposal of unserviceable from site of work with all

lead and lift as per instruction by manufacturer and

architect (chemical make- kerakall, supreme)

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of

13 single or half brick walls for interior plastering upto floor two level and finished 138.60 Sqm 153.52

even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

20mm thick sand faced cement plaster on walls upto height 10 metres above

14 ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3- 354.60 Sqm 300.66

sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

VATA:- Providing cement vata (10cm. x 10 cm. size) quarter round in cement

15 mortar 1:1 including neat cement finishing, watering etc. complete. 60.00 Rmt 23.68

Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-

graded stone aggregate

20mm nominal size) laid in one layer and finished with a floating coat of neat

cement. (B) 50mm thick.

FLOOR TILE: Providing and laying 600 mm X 600 mm X 8 to 10mm thick ( or above

size) first quality vitrified tiles on floor of desired finish ( fully polished glossy,

matt, satin, guard, anti skid, carving ) in desired pattern in floor with residue and

skirting as per drawing / specification. The tiles shall have minimum scratch

hardness of 7 on Moh's scale with a density of 2.2 to 2.3 & bonding strength of

250 kg/sqcm. The tiles shall be set with cement slurry (3.3 kg. cement / m2.) over

a minimum 25 mm. thick cement sand mortar (1:3) bedding on average 40 mm

thick (1:2:4- 6mm down aggregates) wired finish screed & laid to proper gradient.

Finishing to be done with flush pointing in white cement & matching approved

17 pigment incl. curing, polishing & cleaning with mild oxalic acid etc. complete for all 80.00 sqm 1073.13

floors / all levels, as per drawing / specification and or as per direction of Engineer

in charge for flooring, skirting or channel work etc. complete The rate should be

inclusive of protection of flooring until the handling of project by covering the

joints with abrotaps, plastic sheet & plaster of Paris. The rate shall include cost of

25mm cement mortar, 40mm wired finish screed.(basic rate of tiles- 55rs/sq. Ft) (

make Johnson, RAK,karjariya,SYMPOLO or approved make)

KEEN ARCHITECT,

CHEMISTRY BUILDING MEHSANA

r UNIT Rate AMOUNT (

(upto ITEM DESCRIPTION (upto 50 ( Upto 2 Upto

200 characters) Decimals ) Decimals )

WALL TILE:- Providing and laying 600 mm X 600 mm X 8 to 10mm thick ( or above

size) first quality vitrified tiles in dado of desired finish ( fully polished glossy,

matt, satin, guard, anti skid) in desired pattern in floor with residue and skirting

as per drawing / specification. The tiles shall have minimum scratch hardness of

on Moh's scale with a density of 2.2 to 2.3 & bonding strength of 250 kg/sqcm.

The tiles shall be set with good quality premixed tile adhesive with wired finish

screed & laid to proper gradient. Finishing to be done with flush pointing in epoxy

grout 2mm wide grooves & matching approved pigment incl. curing, polishing &

18 cleaning with mild oxalic acid etc. complete for all floors / all levels, as per drawing 400.00 sqm 1076.66

/ specification and or as per direction of Engineer in charge for flooring, skirting or

channel work etc. complete The rate should be inclusive of protection of flooring

until the handling of project by covering the joints with abrotaps, plastic sheet &

plaster of Paris. The rate shall include cost of 25mm cement mortar, 40mm wired

finish screed.(basic rate of tiles- 65rs/sq. Ft) ( make Johnson,

RAK,karjariya,SYMPOLO or approved make)

KOTA STONE FLOORING- Providing and laying polished Kota stone slab 25mm

thick in risers of steps, skirting Dado and pillars laid on 10mm thick cement mortar

1:3 (1-Cement : 3 coarse sand) and jointed with Gray cement slurry mixed with

pigment to match the shade of slab including rubbing and polishing and making of

quarter round outer edges etc. complete.

CHINA MOSAIC: Providing and laying China mosaic flooring for terrace using

mm to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar crème out up to surface using

white cement including rounding off junctions and extending them up to 15 cm

along the wall, clearing with water and oxalic acid etc. as directed.

GRANITE DOOR FRAME: Providing & fixing frame suited for any door opening

style of single average 30 mm thick machined polished GRANITE stone molded

door frame of inner trip 75mmX 18MM wide and outer trip 180mm X 30mm wide

with 35 mm architrave Patti of same jointed with Super flex guaranteed fixing

solution by LATICRETE (MYK) with pigment to match the shades of the slabs,

including rubbing and polishing complete. The Stone used should be in one single

long piece as per drawing or as directed by Engineer-in-charge. The exposed

projected edges shall be of uniform thickness and of uniform projection including

molding , chamfering, rounding, polishing complete granite basic rate 120rs (

color and pattern as per selection by architect)

FLUSH DOOR: providing and fixing 30 mm thick solid core flush type door with all

core should be teak wood Patti and both side 1 MM thick textured laminate as

per selection by the architect ,with groove patterns as per design given by the

architect and including hardware such s.s butt hinges 4 nos, s.s handle on both

side 8", s.s tower bolt 6" on one side, 20mm s.s aldrop on both side, with fixing

on door panel as per architect instruction etc Complete (flush door basic rate-160

sqft laminate basic rate 62 Rs per sqft) (plywood make - century ply, green ply,

laminate make- royal touch, century ply, hardware make- Hettich, Dorma

adhesive make -fevicol)

KEEN ARCHITECT,

CHEMISTRY BUILDING MEHSANA

r UNIT Rate AMOUNT (

(upto ITEM DESCRIPTION (upto 50 ( Upto 2 Upto

200 characters) Decimals ) Decimals )

GRANITE WORK:- Providing & fixing granite stone average 18 mm thick machine-

cut & machined polished stone in treads of steps, sill, copings, parapet top,

window sill, planter top, urinal partition and such other locations, laid on

mm(average) thick cement mortar 1:4 (1 cement:4coarse sand) and jointed with

Super flex guaranteed fixing solution by LATICRETE(MYK) mixed with pigment to

match the shades of the slabs, or fixed to the wall or any surface as directed by

23 the engineer or architect including rubbing and polishing complete. The Stone 15.60 Sqm 3320.00

used should be in one single long piece up to 3000 mm as per drawing or as

directed by Engineer-in-charge. The exposed projected edges shall be of uniform

thickness and of uniform projection including molding , chamfering, rounding,

polishing complete all side .( basic rate of granite should be 120 Rs / sq. Ft

FRP DOOR: Providing and fixing FRP of 28mm thick Fibre Glass shutter with

1.5 to 2.0 mm thick fire retardent grade FRP skin in depressed panel design

having extra reinforcement on sides & edges & in Gel coat finish. The core of

the shutter is to be filled up with injected retardent grade polyurethane foam

done in situ alongwith embedded wooden pieces for stiffening & also taking

hinges & fintures. The whole FRP frame & shutter is to be water proof

24 ,weather proof, termite proof & resistance to mild acid/alkali. Rates are to be 8.20 Sqmt 2011.68

inclusive of S.S hinges with necessary screws & alluminium S.S fixtures &

fastenings & fastener sleeve. including s.s 6' handle two nos and s.s tower bolt

6" 1 nos with fixing complete as per direction of Engineer in charge,

manufacture’s specification and drawing.( hardware make- Hettich, Dorma )

Providing and laying Dura Membrane of 3mm Thickness with 100 Kg/m3

density minimum having tensile strength of 15Kg/cm2 (M.D.) and

Kg/cm2 (T.D.) and tensile elongation of 140% (M.D.) & 120%(T.D.) and

water vapour transmission rate should not exceed 0.05 g/m2 mm of Hg

25 Hour Manufactured by The Supreme Industries Ltd. Continuity should be 52.00 Sqmt 960.50

achieved by overlapping a minimum 2inches (50mm) and firmly sealing the

joint with heavy duty Hot Ait Gun. And top finish with Concrete Screed as

Required and as directed by the Engineer Incharge.

SINDER FILING : Providing and filling with good quality sinder (steam coal) as

directed by engineer in charge in sunks in layers of 15 as directed by engineer in

charge in sunks in layers of 15 cm thk, including watering, placing, ramming well

etc. as directed.

HOLE:- Charges for making holes in brick walls / RCC with or without plaster /

tiles with mechanical cutter like HILTI etc. Including disposing the debris and

finishing the same as per requirements. Measurement of holes will be taken per

27 no. of holes drilled as per following range of diameters. Making of holes by 8.00 Nos 888.80

hammer and chisel will not be considered in this item For Diameter of holes up

to 100 mm clear.

HOLE :- Charges for making holes in brick walls / RCC with or without plaster /

tiles with mechanical cutter like HILTI etc. Including disposing the debris and

finishing the same as per requirements. Measurement of holes will be taken per

28 no. of holes drilled as per following range of diameters. Making of holes by 8.00 Nos 999.90

hammer and chisel will not be considered in this item. For Diameter of holes up

to 150 mm clear. (MR)

KEEN ARCHITECT,

CHEMISTRY BUILDING MEHSANA

r UNIT Rate AMOUNT (

(upto ITEM DESCRIPTION (upto 50 ( Upto 2 Upto

200 characters) Decimals ) Decimals )

UPVC PIPE- Providing laying and jointing in true line and level 15mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at every two meter C/C or

shall be concealed as directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent, including cost of all

materials. make ASTRAL/Ashirwad/prince - or equivalent as approved and

selection by architect

UPVC PIPE- Providing laying and jointing in true line and level 25mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at every two meter C/C or

shall be concealed as directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent, including cost of all

materials. make ASTRAL/Ashirwad/prince - or equivalent as approved and

selection by architect

VALVE:- P/F 25mm Dia cast iron ball valve full way screwed end, metal lever

handle ,isi marked in pipeline of approved quality etc. complete As per Architect

instructions and drawing or as directed by engineer in charge.

VALVE:- P/F 40mm Dia cast iron ball valve full way screwed end, metal lever

handle ,isi marked in pipeline of approved quality etc. complete As per Architect

instructions and drawing or as directed by engineer in charge.

ORISSA PAN WC : providing and fixing (A) White glazed vitreous chinaware

1. SQUATTING PAN (Asian Paints Make-Trend 23 | PN-03-X / PN-03-TX) SIZE

- 23” - Depth - 240 mm , 440x585x310 rectangle shape bowl type including

33 Earthwork, bed concrete, foot rest , concealed , 2. with integral P or S trap 3. 20.00 No. 4570.35

flush cock 25 mm (Asian Paints Make- PP-332) etc. complete to the

satisfaction of EIC making leakage proof connection complete .

BIB TAP: providing and fixing brass chromium plated heavy quality bib-tap

of ( Make -Asian Paints- NEC-02B LONG BODY BIB COCK (FF) WF) on water

34 supply pipe lines of 15mm Dia with or with extension piece but with a flange 50.00 No. 1388.00

etc. complete to the satisfaction of EIC.making leakage proof connection

PVC PIPE: providing and fixing to wall, cealing and floor, SWR quality, heavy duty

6KG/RMT pvc pipes of finolax / astral or equivalent make as approved by eic,,

open laid for soil / waste / rain water etc complate, with necessary specials,

bends, such as Y junction T junction (both single and double) including plugs,

shoes, cowls flange compression type fittings, wall clips, in proper line and level

with necessary support like split clamps of chilly make 3mm minimum thickness

fixed with approved anchor fasteners of HILTI equivalent ,RCC or brick pedestals

or battens if necessary to wall, cealing and floor, open laid complate jointing with

suitable grade of good quality sovelt cement (as recommended by the

manufacturer) including testing, cutting, making good the wall, ceiling and floor,

etc complate to the statisfaction of EIC of the following OD

UPVC PIPE- Providing laying and jointing in true line and level 50mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at every two meter C/C or

shall be concealed as directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent, including cost of all

materials. make ASTRAL/Ashirwad/prince - or equivalent as approved and

selection by architect

KEEN ARCHITECT,

CHEMISTRY BUILDING MEHSANA

r UNIT Rate AMOUNT (

(upto ITEM DESCRIPTION (upto 50 ( Upto 2 Upto

200 characters) Decimals ) Decimals )

Providing & fixing PVC Cowl on PVC ventilating pipes and verticals for soil and

waste Pipes & Rain water pipes at top level/ terrace level, as specified and

required, etc. complete.

(A) 110 mm diameter

make ASTRAL/Ashirwad/prince - or equivalent as approved and selection by

NANI TRAP: Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm

diameter with jali of the following nominal diameter of self cleansing design with

C.I screed down or hinged grating including the cost of cutting and making good

Constructing septic tank of the required dimention as shown and mentioned in the

drawing ( inside 4.50x 1.50 x1.50 mt deep) including providing and laying 0.10 mt

th. P.c.c. in 1:4:8 and over 0.15 mt th. Plain cement concrete 1:3:6 with above cc

15mm th. smooth plaster at bottom with brick masonary 23cm thick walls and

41 intermediate partition in 11.5 cm th. r.c.c. slabs in 1:2:4 at partition in 11.5 cm th 3.00 No. 48768.86

cement plaster work in cm 1:3 with providing and fixing SFRC over total weight of

cover with frame to be not less than 38 kgs( wt. of cover 23 kgs) work completed

by instruction by engineer in charge.

providing and constructing 6.00 mt dia and 6.5 mt deep sock pit including

42 excavation BBCC, BRICK MASONARY WORK AT BOTTOM and top in honey 3.00 No. 200000.00

combica masonary in mud goober as directed.

Constructing Brick masonry road gully chamber 500mm x 450mm x 600mm

including 500mm x 450mm C.I. horizontal grating wih frame complete.

Note :- GST Shall be paid Extra on submitted rate

KEEN ARCHITECT,

CHEMISTRY BUILDING MEHSANA