SPECIAL REPAIRS TO CYCLONE DETECTION RADAR (CDR)/INMAC BLDG (P-466) AT NB(K).

Amount

Dismaintaing wall/floor tiling including cement mortar bedding removing serviceable bles to store and rubbish off the premises as in repair complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface 300x200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L Non skid ceramic coloured tiles not less than 7 mm thick square/ rectangular of are exc 0.11 Sqm and not exc 0.18 Sqm in floors ect set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified and as directed.

M&L for Vitrified double/ ultra charged stain free tiles of size 800x800x10 mm thick with approved pattern and colour borders over cement screed 15 mm thick in CM 1:4 complete all as specified and directed.

All as per serial item No. 4 above but on vertical surfaces as skirting over 10mm thick rendering in cement mortar 1:3 complete all as specified and as directed.

M&L for cutting grinding of terrazzo tiles or kota stone floor etc with grinding machine after filling the pits and holes with matching cement and polishing with 3 step grinding stone complete on floor/ vertical surface of wall dado, skirting etc complete all as specified and directed .

S&F 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

S&F Steel rolling shutters of lathes 1.25mm thickness, with out ball bearing, gear operated type with bevel gear box and crank handle as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and as directed.

M&L for preparation of new Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of anti corrosive Epoxy paint over a coat of Epoxy primer, over a coat of red oxide on steel surfaces complete all as specified and as directed. (Make-Asian Apcolite or Equal from Berger, Nerolac)

Demolition of brick work / PCC block masonry built in cement mortar including all quoins, arches, pillars, etc. all as specified and as directed by the Engr-in-Charge. Note: rate shall be inclusive of removal of material outside MD land

M&L Pre-cast cement concrete block masonry with solid blocks in PCC 1:3:6, (20mm graded aggregate) exc. 10 cm in width and setting in mortar in CM 1:6, complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls, ceiling including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Rendering 10mm thick in CM 1:6 internally on brick or concrete surfaces of wall including finishing even and smooth without using extra cement complete all as specified and as directed.

M&L for 8mm thick CM 1:4 with approved water proofing compound over backing coat of 12mm thick plaster in CM 1:6 on fair faces of brick or concrete surfaces finished even and smooth wothout using extra cement complete all as specifed and directed.

M&L for preparation of new wall surfaces and appying two coat of interior emulsion ( Asian Royale interior emulsion or equivalent make in list of manufactures ) over a coat of alkali resistant primer and 1.5mm thick wall care putty complete all specified and directed. Note: Application of paint, primer and wall care putty shall be as per manufactures instruction

M&L for preparation and complete removal of existing treatment and applying two coats of interior emulsion (Asian royal emulsion or equivalent make in list of manufactures) over a coat of alkali resistant primer and 1.5mm thick wall care putty complete all as specified and directed. Note Application of paint,primer and wall care putty shall be as per manufacturers instruction

M&L for complete removal of existing suracfe finishes of external wall ( with mechanical means like grinding and washing with water jet) preparation of surface and apply base coat over 1.5mm thick exterior grade wall care putty and allowed to dry over night before appying first coat of weather proof (premium acrylic emulsion paint alkali & fungal resistance,dirt resistance exterior paint) complete all as specified and as directed. Note :- Before application of primer coat, the moisture of the wall surface shall be checked with a moisture meter .

M&L for preparation of new plastered external wall surfaces and apply base coat to antifungal paint over 1.5mm thick wall care putty and allowed to dry overnight before applying first coat of weather proof (antifungal paint) complete all as specified and as directed. Note :- Before application of primer coat, the moisture of the wall surface shall be checked with a moisture meter .

M&L for application of first coat of weather proof paint (premium acrylic emulsion paint alkali & fungal resistance, dirt resistance exterior paint of required shade ) ( Asian paint apex ultima protek or equivalent make mentioned in list of manufactures ) on primed wall surface using spray application or mechanical means, to get a smooth and tint free surface and allowed to dry for at least 8 hrs/ overnight to receive second coat of acrylic exterior emulsion paint complete all as specified and as directed.

M&L for application of second coat of weather proof paint (premium acrylic emulsion paint alkali & fungal resistance, dirt resistance exterior paint of required shade ) ( Asian paint apex ultima protek or equivalent make mentioned in list of manufactures ) over first coat on wall surface using spray application or mechanical means, to get a smooth and tint free surface complete all as specified and as directed. Note for item No. 15 to 20: (i) The old surface shall prepared using mechanical ways I.e., jet-spray, grinding etc., in such a manner that there should not be any impression of dent, all cracks to be filled with crack filler, water proofing primer in shaft/dampness areas and it should be made even all as per manufacturers instruction before application of putty base primer/base coat and emulsion paint. (ii). The work shall be got executed through authorised applicator of approved manufacturer. Authorisation letter of applicator shall be produced by the contractor before starting the work (iii) The contractor shall submit performance Guarantee certificate provided by manufacturer for a period of FIVE years from the certified date of completion of entire work. (iv) After preparation of surface exterior putty to be applied to make surface even to receive base coat and two coat of emulsion paint, the same shall be got approved by GE before each stage.

Complete removal of existing surface finishes of Ceiling, preparation of surface and applying two coats of OBD over a coat of suitable primer complete all as specified and as directed.

M&L for preparation of old wooden surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for complete removal of old steel paint surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of epoxy paint over a coat of epoxy primer at any height all as specified & as directed.

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats complete all as specified and as directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4.0 sqm each but with shutters (without taking off shutters from the frames) complete all as specified.

S&F second class hard wood (sal) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F factory made coloured powder coated aluminium section having a min of 15 micron as in frame for windows/ partition wall styles rails etc with one or more rebates ( wall thickness of aluminum section not less than 2mm) complete all as specified and directed (glazing and aluminum hard ware shall be measured & paid separately) Make of aluminum section HINDALCO, JINDAL, NALCO)

S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.

S & F Powder coated anodised aluminium 5mm dia hexagonal channel for grill fixed to aluminium frame with aluminium bidding complete all as specifed.Make : JINDAL or equivalent section from HINDALCO/INDALCO/MS AJIT IND PVT LTD

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty / beeding in squares not exceeding 0.5 sqm each pane fix to wood/aluminium joinery complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification

S & F Butt hinges Stainless Steel 100mm complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy of length complete all as specified and as directed. .

S&F Aluminium anodiser barrel tower bolts of extruded sections of size 150 mm complete all as specified and as directed.

S&F Aluminium handles, cast type, anodised of size 150 mm complete all as specified and as directed.

Supply and fixing in repairs of Bib cock , CP quarter turn with flange and areator, fancy type short body cast copper alloy with crutch or butterfly handle screwed for GI/ CPVC pipe of size 15 mm complete all as specified and as directed by the Engineer-in-charge.(Make : Model No F2004151 of Cera or equivalent make mentioned in list of makes)

S & F in repair viterous China wash down water closet pan(pedestal pattern),white incl plastic water closet seat ,black, closed pattern with flat bottom,cover and mild steeel chromium plated or aluminised hinging device,fixing bolts,PVC valveless,syphonic action type, flushing cisteren,10ltr capacity low level,white,with inlet,ball valve,float& handle incl brackets,PVC connections 15mm size with PTMT nits of length 600 mm and flush pipe of polyethylene of low or high density or PVC 32mm dia,for low level cistern complete all as specified and directed.

Supply and fixing health faucet ABS body with wall hook and 1 metre SS braided rubber hose pipe , including taking out old one all as per specified and directed (Make : Model No: F8030102 of Cera or or equivalent make mentioned in list of makes).

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S & F in repair tubular towel rail, brass cromium plated 20mm dia,D type,60cm long between flanges complete all as specified and as directed.

S & F in repair sheet glass shelf assembly consisrting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F in repairs Vitreous China wash basin, white, flat back, size 630x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and as directed.

Supply and fixing in pillar taps, swan neck spout with areator, cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed for 15mm bore pipe,complete all as specified and directed .(Make : Model No:F2004105 of Cera or equivalent make mentioned in list of makes).

S&F in repairs for Angular stop valve,cast copper alloy,screwed down,heigh pressure with crutch or butterfly handle,cromium plated,fancy type ,screwed both ends for iron pipe or for union and fixed, sutable for 15 mm bore pipe all as specified

S&F in repairs vitreous china urinals white half stall type including all fittings complete all as specified and as directed.

S&F in repairs Chinaware partition for urinal of size 310 x 700 mm all as specified and as directed.

S&F in repairs Push tap high pressure suitable for urinals complete all as specified and as directed 15mm bore of pipe complete all as specified and as directed.

S&F in repairs CP urinal spreader for 15 mm bore fixed with urinal including CP pipe complete all as specified and as directed.

S&F in repair PVC Rain water pipe 110 mm dia single socketed in any lenth with rubber ring joints complete all as specified and as directed.

S&F PVC bend 110 mm dia complete all as specified and as directed.

S&F PVC Brackets suitable for fixing of 110 mm dia PVC pipes complete all as specified and as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including frame work. cover fillets etc complete all as specified.

S&F for powder coated aluminium snap grid frame work for false ceiling (grid size 600x600mm) fixed to wall with rawl plugs and screws and hang to roof members with 6mm dia GI wire (upto 120mm length) adjusting level fixed to roof slab by mean of ceiling cleats made out of GI 40x3mm size 60mm long and expansion hold fastners 12.5mm dia 40mm long with and including 12mm thick perforated gypsum ceiling board size of 595x595mm fixed or laid /inserted to timber/GI/Aluminium frame work complete all as specified and directed.

Demolition of existing roof treatment including PCC and old tarfelt pavings in any thickness form roof surface incl cleaning of surface by water removing dust by pressure pump etc and remove all debris from roof surface height at any height complete all as specified and as directed. . Note: Rate shall be inclusive of removal of material outside MD land

M&L for water proofing treatment with cement mortar 1:4 admixed with Nito bond SBr or equivalent @ 1 litre per 50 Kg of cement . Down take rain water pipe annular space packing using conbextra GP2 or equivalent mixed water and filling as per manufactures specifications. Water ponding shall be minimum for 48 hours and injection grouting of construction joints,leaking spot and honey combs with cementatious pressure grouting with 40psi pump using cebex 100 or equivalent @225 gms mixed to 50 Kg of cement including joints packing using polymer modified mortar. Providing and applying water proof coating using Fosroc Nitoproof 600 or equivalent over dry surfaces and 1.5mm thick with 02 coats with interval period of 6 hours over the surface at a coverage rate of 2 Kg/Sqm using spray/roller/brush. Water proofing coating shall have elongation of 500-700% (ASTM D 412-90) tera resistance of 21KN/m (ATMD 624-00) and tensile strength > 1.9 N/mm2.Termination to be done on wall extending the coating to min 300mm height above the finalised floor level as per vendor recommendation. Laying 200Gsm non woven geo texyile membrane over Nito proof 600 coating with overlap sealed before providing screed concrete of thickness 50mm including screed concrete 1:2:4 mix type B1 with approved water proofing compound to maintain drainage of water easily complete all as specified and as directed. (Note: Water proofing compound shall be measured and paid seperately)

M&L for Microcon concreting in RCC coloumns, soffit of slab and Beams including chemicals, reinforcement ,form work averaging thickness not exceeding 50MM as per the following stages, (I) Remove the damaged concrete portions completely till the reiforcement is exposed from the member carefully with mechanical arrangements and hand chiseling and clean the dust particles. (ii) Claan the reinforcement and apply Nitrozinc primer manufactured by M/S Fosroc chemicals or equivalent with providing sacrificial Zinc anode Galvashield XPI (iii) applying the bonding agent by using NITO BOND EP or equivalent (iv) Providing leakproof shuttering system for the jacket portion of the members and micro concrete with Rendroc RG manufactured by M/S Fosroc chemicals or equivalent( compressive strength of Micro concrete should be 50 N/mm2) Reinforcement will be measured and paid in connected item separately

S&F Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides thickness 30mm complete all as specified and as directed.

S&F 0.9mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed.

Providing and fixing factory made UPVC any colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)

Demolition of stone slabs of any description or thickness laid bedded in any motar. Note: Rate shall be quoted for removal of material outside MD land

M&L 9 mm thick prelaminated partilce boards interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screw to timber frame for aluminium door and aluminium partitions complete all as specified and as directed.

M&L for Coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm under floors or in foundations spreading and levelling in layers n exc. 25 cm thick incl well ramming including watering as required complete all as specified and directed.

M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment complete all as specified and directed.

M&L for providing cement concrete Type B0, 1:2:4 (using 12.5mm graded aggregate) as in kerb including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m deep and getting out in loose/soft soil complete all as specified and as directed.

M&L for PCC 1:4:8 in foundations, filling and mass concrete complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Removing excavated material (soil) exc. 1.50 km but n exc. 5 km and depositing where directed

Returning filling in including spreading levelling watering and well ramming in layers not exc 15cm thick complete all as specified

Dismantling structural steel members such as channels angle iron flat etc and steel sections of any description by gas cutting or other means all as specified and directed.

M&L for complete removal of old steel paint surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of epoxy paint over a coat of epoxy primer at any height all as specified & as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, sheet metal encl. with plug & socket etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

M&L point wiring with 1.5 Sqmm PVC insulated unsheathed FRLSH multistranded single core copper conductor cable in PVC concealed conduit rigid non metallic ( ISI marked ) fixed concealed on wall /roof except beam, column and RCC roof including chases cutting incl suitable for modular switch and socket (sunken box) modular white cover plate,flush metal box etc incl 1.5 Sqmm PVC insulated copper conductor as earth continuity wire for One light point controlled by one switch and making good disturbed surfaces of walls, floors,etc complete all as specified and as directed.

All as per item No 77 here in above but One fan point / exhaust fan point controlled by one switch & regulator complete all as specified and as directed.

All as per item No 77 here in above but One 5 pin 5 Amps Socket point controlled by one switch on same board complete all as specified and as directed.

All as per item No 77 here in above but One 5 pin 5 Amps socket point controlled by one switch on independent board complete all as specified and as directed.

All as per item No 77 here in above but One bell point controlled by one switch complete all as specified and as directed.

All as per item No 77 above but with 2.5 Sqmm copper conductor including 2.5 Sqmm copper cable as earth wire for one 6 Pin 16 Amps Socket outlet on independent board complete all as specified and as directed..

All as per item No 77 above but with 4 Sqmm copper conductor including 4.0 Sqmm copper cable on earth wire for sheet metal enclosure complete all as specified and as directed.

S & F modular switch 1 way 6 Amps,1 module type complete all as specified and as directed.

S & F Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and as directed.

S & F socket modular 6 Amps and 2/3 pin combined 2 module complete all as specified and as directed.

S & F Modular socket 6 A/16 A - 2/3 pin combined 2 module complete all as specified and as directed.

S & F switch 15 A One way SP modualr type complete all as specified and as directed.

S & F bell push button flush type 5 Amps complete all as specified and as directed.

Taking down existing Light fittings of any type and size and removing to store yard complete all as specified and as directed..

S&F Tubelight fitting 1 x 20 w , system efficiency 120 Lumen/watt with T 8 LED tube with aluminium Extrusion heat sink for optimum performance with high luminous efficiency and batten pre wired suitable for use with LED tube with concealed accessories complete all as specified and directed. Make:REGALBATTENT8UPTO1X22WSSBSWH & LED rod CRYSTAL1213T8DSTL20WLED865SGLASS/CG/WIPRO or equivalent make mentioned in list of make

S&F of LED recessed mounted 600X600 mm luminaire having power consumption not more than 30W and light output not less than 3600lumens with system efficacy>120 lumen/watt. Housing shall be made up from single piece CECA body without welding to avoid rusting and polystyrene diffuser to reduce glare. The luminaire should be having minimum 50000 burning hours (L70B50) with CRI > 80, SDCM<5 and co related color temperature (CCT) of 6500K. The luminaire shall be flicker free with a ripple content less than 5%. The luminaire must have 4KV surge protection integrated in driver,PF> 0.95,total harmonic distortion THD< 10% and operating voltage range 140-270 V with high voltage cutoff @325+- 15V with auto restart feature. Luminaire and driver shall be seperately BIS approved of same make equivalent to philips RC380B LED36S-6500 G6 L60W60 PSU OD or techno commercially equivalent make mentioned in list of manufactures

S & F LED Mirror light fitting 10 watt system efficiency 120lumen/watt with connected accessories complete all as specified & directed. Make Philips Cat Part No. BN 021 LED10S 6500 PSU GR S1 or equivalent make mentioned in list of makes

Supply and fixing of ding dong bell AC 230 V single pole complete all as specified and directed.

S&F fan regulator electronic step type, modular type, 120 W, 2 module complete all as specified and as directed.

S&F Sheet metal enclosures with socket plug top and MCB' single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 A MCB complete all as specified and directed.

Taking down old DBs with MCCB /MCB of any size complete all as specified and directed.

S&F Sheet metal enclosure Vertial TPN for DB's when MCCB's to be used 6 way with 200 amps bus bar double door IP 43 glazed door complete all as specified and as directed.Make L & T cat No DBVTL006GD or equivalent make mentioned in list of makes

S&F Sheet metal enclosure TPN for DB's when MCCB's to be used 4 way with 200 amps bus bar double door IP 43 glazed door complete all as specified and as directed.Make L & T cat No DBTPN004GD or equivalent make mentioned in list of makes

S&F SPN sheet metal enclosure for DB 8 ways Double door complete all as specified and as directed

S&F SPN sheet metal enclosure for DB 4 ways Double door complete all as specified and as directed

S&F MCCB 4 pole, 415 Volt fixed type 200 Amps with breaking capacity 36 KA complete all as specified and directed.

S&F MCB 'B' Curve 63 Amp Three pole, 415 Volts complete all as specified and directed. Make L&T Cat Part No. BB30630B or equivalent make mentioned in list of makes

S&F MCB 'B' Curve 40 Amp SPN ,240 Volts complete all as specified and directed.Make L&T Cat Part No. BB20400B or equivalent make mentioned in list of makes

S&F MCB 'B' Curve SP 6 To 32 Amp , 240 Volts, complete all as specified and directed. Make Schneider Cat Part No. A9N1P06B to A9N1P32B or equivalent make mentioned in list of makes

Supply & fix Wall mounted fans AC single phase 230/ 240 V of size 300 mm sweep complete including taking down complete all as specified and directed.Make Havells D'zire HS or equivalent make mentioned in list of makes Note:- Old wall mounted fans will be deposited in MES store yard

Supply & fix ceiling fans complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated complete including taking down all as specified.Make CG Cat Part Energion HS BLDC or equivalent make mentioned in list of makes Note :-Old ceilings fans will be deposited in MES store yard

Taking down unserviceable ceiling fan of any size complete all as specified and as directed.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep, White, Plastic 1200 rpm complete including taking down all as specified. Make Havells Ventil Air -Dx white or equivalent make mentioned in list of makes Note:- Old exhaust fans will be deposited in MES store yard

Supply & fix heavy duty exhaust fans AC single phase 230/ 240 V of size 300 mm sweep, 1400 rpm complete including taking down all as specified Make CG EXHD300-4-1 or equivalent make mentioned in list of makes Note:- Old exhaust fans will be deposited in MES store yard

Taking down old sub main wiring of any size complete all as specified and as directed.

M/L submain wiring with 2 single core 4 Sqmm PVC insulated unsheathed multistranded copper conductor cable 1100 volt grade drawn throgh and including PVC rigid conduit concealed wiring inculding necessary PVC conduit specials including chases cutting complete exceapt beam and RCC roof and one run of 4 Sqmm PVC insulated unshearthed single core 1100 volts grade multistranded copper conductor cable as earth continuity conduto9r and connceting with suitable size thimble complete all as specified and as directed. Note: two run of 4 sqmm size PVC cable , one run of 4 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length

All as per item No 112 above but 2 single core 6 Sqmm with 6 Sqmm earth wire complete all as specified and as directed. Note: two run of 6 sqmm size PVC cable , one run of 6 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length

All as per item No 112 above but 2 single core 10 Sqmm with 10 Sqmm earth wire complete all as specified and as directed. Note: two run of 10 sqmm size PVC cable , one run of 10 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length

M/L submain wiring with 4 single core 10 Sqmm PVC insulated unsheathed multistranded copper conductor cable 1100 volt grade drawn throgh and including PVC rigid conduit concealed wiring inculding necessary PVC conduit specials including chases cutting complete exceapt beam and RCC roof and two run of 10 Sqmm PVC insulated unshearthed single core 1100 volts grade multistranded copper conductor cable as earth continuity conduto9r and connceting with suitable size thimble complete allas specified and as directed. Note: four run of 16 sqmm size PVC cable , two run of 10 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length

Material and labour earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below normal ground level surrounted from all side by 15 cm of thick and packed layers of charcoal dust and common salt ,filling alternate layers and electorde connected by using GI wire 4 mm dia (max -length of 7.5 mtrs )by means of bolts,nut and washer of GI and providing GI light grade pipe 15 mm dia as prrotection pipe for GI wire connected main controll board / test point and provided with GI pipe of light grade 20 mm bore for watering and including funnel,wire mesh PCC chamber of 1;3;6 type C1 ,and RCC cover of 1;2;4 type B1 including necessary earth work in any type of soil /strata disposal of soil all as directed and shown in electrical plate No. 3 of SSR part -1 including testing on completion .

Taking down old earthing any size complete all as specified and as directed.

Supply and fixing building security light made up of pressure die cast housing with toughened glass and high power LEDs with option of secondary optic with IP 66 protection of 45 Watt system efficiency 120 Lumen/watt including suitable GI bracket of 25 mm dia and fixing arrangement on walls all as specified and directed including taking down of existing light fitting of any type and make Crompton Cat Part No. Crompton Cat Part No. LSTS-45-CDL-M or equivalent make in list of manufactures.

Supply & fixing, jointing, connecting & testing in trenches XLPE/PVC insulated PVC sheathed cable heavy duty 1100 volts grade, aluminum conductor in trenches / ducts/Wall of size 3.5 core 120 Sqmm all as specified and directed :

Taking down old GI/ CPVC pipe of size 40 mm complete all as specified and as directed.

Taking down old GI/ CPVC pipe of size 20 mm complete all as specified and as directed.

Taking down old GI/ CPVC pipe of size 25 mm complete all as specified and as directed.

Supply and fix in repair on wall/concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 40 mm dia complete all as specified and directed.

All as per item No 123 here -in-before but of size 25 mm dia complete all as specified and as directed.

All as per item No 123 here -in-before but of size 20 mm dia complete all as specified and as directed.

Taking down old bib tap, stop cock,shower ,pillar tap,sink cock,angle valve, health faucet, angle cock etc complete all as specified and as directed.

Supply and fix concealed stop cock regular body,Quarter turn with adjustable wall flange chromium plated with CP cup fancy type of size 20mm complete all as specified and as directed .(Make : Model NO: F2002362 of Cera or equivalent make mentioned in list of makes)

Supply and fixing 15 mm angle valve, half turn with flange, with flange type chromium plated for fixing accessories for for CPVC pipe complete specified and as directed by the Engineer-in-charge.(Make : Model No: F2004201 of Cera or equivalent make mentioned in list of makes)

Taking down old PVC connection complete all as specified and as directed.

Supply and fixing PVC connection pipe 16mm dia (outer 450mm long cold water and taking down old one complete with brass union on both sides to suit 15mm GI pipe complete all as specified and directed .

Taking down old Urinals complete all as specified and directed.

Supply and fixing CP angle cock, self closers/ pressmatic with wall flange for urinal pots to fixed in 20/15mm pipe, complete all as specified and directed by the Engineer -in-charge (Model No F9020203 of CERA or equivalent make mentioned in list of makes

Supply and Fixing of Kitchen sink cock quarter turn wall mounted with long swivel spout not less than 150 mm and wall flange complete all as specified and as directed .Model No: F2004251 of CERA or equivalent make mentioned in list of makes

M/L for cutting chasses on walls floor etc not exceeding 20 cm girth and making good the disturbed surface to match with the existing after removing the existing concealed pipe/laying new pipe, complete all as specified and directed .

Demolition of cement concrete in ground floors and pavings n exc 15cm thickness, above ground level in the foundation complete all as specified and directed . Note: Rate shall be inclusive of removal of material outside MD land

Material and labour for cement concrete in foundations, filling and mass concrete type 1:3:6 (40mm graded aggregate) complete all as specified and directed .

Taking down old CPVC ball valve of size 20 mm /25 mm /40 mmcomplete all as specified and directed.

S& F CPVC Ball Valve of size 40 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed.

M & L for CPVC Ball Ball Valve of size 25 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed.

Taking down old rotational moulded polythene water storage tanks of capacity 1000 litres complete all as specified and as directed.

Supply and fixing in replacement of Rotational mouldede polyethylene water storage tanks (cylinderical vertical with closed top) hoisted & fixed in position of capacity 1000 liters including inlet, outlet, over flow wash out and Air pipe conncetions.

M.J.JOY AND COMPANY

Albert Rebello and Company