Supply and Installation of Bulk Flow Meter Device at Intake Well, Old ESR, OGR, New WTP, and different production wells at Kashinagar Town.

Supply, installation, testing and commissioning of Electromagnetic Flow Meter (EMF) As Per ISO 4064, for Raw/Pure water with accuracy +/- 0.5% of measured value & protection as per given specifications for size 100mm to 1000mm including sensor, transmitter, Surge Protector, cable GI duct if suitable size 25 mm and power supply of Flow meter must be 24V DC. 24V DC SMPS with MCB, Surge Protection device, GSM/ GPRS modem (with Simcard suitable for available telecom network and its charges valid for 36 months) including the pipe cutting, levelling and installation of flow meter in the pipelines with necessary tool tackles, cranes including 36 months guarantee, Flow meter data dashboard must be prepared web based applicable which can be accesable from anywhere over internet etc complete, as may be required at site & based on technical specifications (Make: Krohne Marshall/ ABB/ Siemens/ Adept Fluidyne/ Toshniwal/ Emerson/ E&H/ Yokogawa) Line Size-100 MM

Line Size-150 MM

Line Size-200 MM

Line Size-250 MM

Line Size-300 MM

Providing, fitting and fixing cast iron mechanical joint flanged socket tail piece as per IS.13382 of following in pipe as per specification including testing with cost of all jointing metering transportation to site etc.all complete as per direction of Engineer-in-charge 100mm dia. C.I. M.J. flanged socketed T/P

150mm dia. C.I. M.J. flanged Socket T/P

150mm dia. D.I. flanged Socket T/P

200mm dia. D.I. flanged Socket T/P

250mm dia. C.I. M.J. flanged Socket T/P

250mm dia. D.I. flanged Socket T/P

300mm dia. D.I. flanged Socket T/P

Flame cutting and facing of M.S Plate or pipes upto 8mm thick including supply of all labour, materials, tools & Plants for following plate thickness all complete as per specification and direction of Engineer-in-Charge.

Supplying and laying in trenches HDDPE(PE-100) pipes of the following nominal bore and tube fittings for encasing of cables including earth work, testing as per specification all complete as per direction of EIC. 20mm OD(3/4") HDPE pip[e (6Kg/Cm2)

Installation of chemical earthing with maintenance free at the electrode, 25mmx600 hot dipped galvanized strip filled with a highly conductive non-corrosive compound, G.I pipe 50mm dia. Secondary electrode, G.I base plate 300mmx300mm, ground filling compound 50kg including excavation of earth and pre cast RCC chamber and all earthing work as per direction of Engineer-in-Charge.

Construction of Sluice valve Chamber (Inner size 1.20x1.20x1.30)