Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.7 LAccepted-AOC 154 155 SUBATHU DISTT SOLAN 173206 | SOLAN | SOLAN | HIMACHAL PRADESH | 173206 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹8.3 L+₹45,857.50 (5.81%)Rejected-AOC 00 GIRDHAR GARDEN KE SAMNE KHARI PHATAK ROAD VIDISHA VIDISHA MADHYA PRADESH 464001 | VIDISHA | MADHYA PRADESH | 464001 | L2 | Rejected-AOC Other than lowest bidder | |
| 3 | L3₹8.4 L+₹51,560 (6.54%)Rejected-AOC | L3 | Rejected-AOC Other than lowest bidder | |
| 4 | L4₹8.6 L+₹70,491.50 (8.93%)Rejected-AOC 217 ARHAT BAZAR KASAULI DISTT SOLAN HP 173204 | SOLAN | HIMACHAL PRADESH | 173204 | L4 | Rejected-AOC Other than lowest bidder | |
| 5 | L5₹8.8 L+₹89,329.50 (11.3%)Rejected-AOC | L5 | Rejected-AOC Other than lowest bidder |
Tender Value
Refer Docs
EMD Value
₹14,000
Closing Date
9 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I R AND D MANALI
AGE I R AND D MANALI PIN 175103 PH 01902255014
REPAIR/ MAINTENANCE OF SEPTIK TANKS, SOAKAGE PITS AT CERTAIN PLACES AT TRANSIT CAMP PALCHAN
2022_MES_546144_1
AGE(I)/MNL-44/2022-23
Open Tender
Civil Works
Item Rate
240 days
palchan
As per NIT
5 documents required · 5 mandatory
₹500
AGE I R AND D MANALI
₹14,000
Yes
15 Nov 2022
18 Aug 2022
12 Sept 2022
18 Aug 2022
9 Sept 2022
2 Sept 2022
Amount
Demolition of brick work/stone masenary built in cement mortar or cement lime mortar including all quoins, arches etc complete all as specified and directed by Engineer-in-charge.
Taking down cement plaster including raking out joints, hacking for key,scrubbing down with water built in cement mortar.complete all as specified and directed by Engineer-in-charge.
M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even smooth without using extra cement complete all as specified and directed by Engineer-in-charge.
M & L for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of chalk whiting primer complete all as specified and as directed by Engr-in-Charge. (Make Acrocem/Snowcem and equivalent)
M&L for Pre-cast cement concrete block 1:3:6 type C1 (using 20mm graded aggregate) masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed by Engineer-in-charge.
M&L for Pre-cast cement concrete block 1:3:6 type C1 (using 20mm graded aggregate) masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 but excepts blocks, complete all as specified and directed by Engineer-in-charge.
M & L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and directed by Engineer-in-Charge
M&L for 75mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate as in subbase of floor complete all as specified and directed by Engineer-in-charge.
M&L for 100mm thick PCC type C-2, (1:2:4) using 20mm graded stone aggregate in floor complete all as specified and directed by Engineer-in-charge.
Dismantling of cast iron /PVC pipes 75/100mm dia complete all as specified and directed by Engineer-in-Charge
supply and fixing, PVC (SWR) pipes single socketed in any length with rubber ring joints 110 mm dia fixed to walls/ Laid in trenches complete all as specified and directed by Engineer-in-charge.
supply and fixing, PVC (SWR) pipes single socketed in any length with rubber ring joints 75 mm dia fixed to walls complete all as specified and directed by Engineer-in-charge.
supply and fixing, PVC (SWR) bends any radius of 110 mm bore. complete all as specified and directed by Engineer-in-charge.
supply and fixing, PVC (SWR) bends any radius of 75 mm bore.complete all as specified and directed by Engineer-in-charge.
S&F, PVC (SWR) junction single, (single T) equal or unequal 75mm dia with access door complete all as specified and directed by Engineer-in-charge.
S&F, PVC (SWR) junction single, (single T) equal or unequal 110mm dia with access door complete all as specified and directed by Engineer-in-charge.
S&F, PVC(SWR) vent cowl 110mm dia complete all as specified and directed by Engineer-in-charge.
S&F, PVC(SWR) vent cowl 75mm dia complete all as specified and directed by Engineer-in-charge.
M&L for concrete bed to drain pipes in cement concrete 1:3:6, type-C2, including packing under and haunching against the sides of pipes after they are laid & tested, complete all as specified and directed by Engineer-in-charge.
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed by Engineer-in-charge.
S&F, 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and directed by Engineer-in-charge.
S&F, Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.complete all as specified and directed by Engineer-in-charge.
S&F, Pre- painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.complete all as specified and directed by Engineer-in-charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engineer-in-charge.
S&F, Mild steel of joist channel, angles, hollow tubes or Tee sections fixed independently without connecting plate conforming to Fe-410 Gde -250 quality 'A' complete all as specified and directed by Engineer-in-charge.
M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of syntehtic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge.
S&F, Plain, black, mild steel sheeting, 1.25mm thick, in ridges, doors, hips, valley gutters, drip and straight flashings (length and girth as fixed), with welded or soldered provided complete, all as specified and directed by engineer-in-charge.
Taking out solid content from sump/Soakage pits/septic tank and sewage lines either manually or by pumping cleaning thoroughly incl disposal of liquid/solid content out of the Defence Area and covering with layer of earth complete all as specified and directed by Engr –in-Charge.
S R AND CO
NATHU RAM AND SONS
Vinod Kumar Aggarwal
R. P. Suppliers and Construction Co.
Rajesh Agencies
Vishal Builder
Arsh Builder
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .