PROVN OF CHAIN LINK FENCE AROUND FOOTBALL GROUND NEAR BG GATE NO.2, GD ROOM FOR 08 X OR AT MACHAN POST, DRAIN NEAR MARKET NO.1 UNDER GE CLEMENT TOWN, DEHRADUN

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

M & L for cement concrete 1:3:6 type C2 using (40mm graded stone aggregate) as in foundation filling mass as concerete complete all as specified and directed.

S & F of mild steel work in post and struts for fencing, hand rail, half round or other stock section or core for fixing of wooden hand rails, bluster, running bars, nosing steps,wind ties, flat iron fillets and the like including necessary cutting,drilling holes, notching etc. as required conforming to Fe-290 Grade E-165 complete all as specified and directed.

S&F mild steel screw bolt (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, dia of shank 11 to 15 mm and length of bolt exc 5 cm but n. exc 10 cm complete all as specified and directed.

M & L for mild steel round bars 10 mm dia and over,cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S & F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

Fixing only chain link fencing, any mesh , size and type to standards, rails, straining bolts , etc including provision of binding wire complete all as specified and directed.

Supply only chain link MS galvanised fencing size of mesh 50X50mm and 3.8mm dia of wire complete all as specified and directed

M & L for preparation of new or previously untreated steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S & F of Punched type concertina coil (0.50 mm thick cold rolled carbon strip and 2.50 mm thick core wire with UTS of 1400 N/Sqmm) of 750 mm dia in unstretched condition and 680 mm dia after stretching complete all as specified and directed.

S&F MS work as in doors or gates, windows, ventilators of angle/rectangular or square hollow section or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering doors, windows, ventilators etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door, window, ventilator fittings and hanging, also fastening and fixing conforming to Fe 410-W (Gde-E-250) quality 'A' complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n exc 1.5 m depth in any type soil for foundation etc or for shafts, wells,cesspits ,manholes ,pierholes etc and getting out complete all as specified and directed.

M&L for returning fillings in any type of soil inc spreading levelling watering and well ramming in layers complete all as specified and directed.

M&L for removing excavated material (soil) to a distance n.exc 50 m and depositing where directed at a level n.exc 1.50 m above the starting point complete all as specified and directed.

M&L PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate, as in foundation ,filling and mass concrete complete all as specified and directed.

M&L for use & waste form work as in foundation ,footing,base of columns and plinth beam and similar work for fair finished surface concrete surface complete all as specified and directed.

M&L for use & waste form work as in side of pillars ,posts, sturts ,pier,column and similar work for fair finished concrete surface complete all as specified and directed

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in copings including necessary form work complete all as directed.

M&L for 15mm thick cement plaster in CM 1:6 on fair face of brick walls or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing new wall plastered surface and applying 2 coats of cement base paint over a coat of cement primer of any shade on walls surface complete all as specified and directed.

M&L for 14 to 16 mm thick granite polished in pillars, jambs including pointing in white cement 1:2 with admixture of pigment to match with granite incl half round moulding complete all as specified and directed.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out any type of soil complete all as specified and directed.

M&L half brick thick brick work with sub class "B" bricks straigth or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed.

Supply only liquid waterproofing compound complete all as specified and directed.

M & L for providing reinforced cement concrete M- 25 (Design Mix), using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M & L for providing reinforced cement concrete M- 25 (Design Mix), using 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed.

M & L for providing reinforced cement concrete M- 25 (Design Mix), using 20 mm graded stone aggregate as in lintels complete all as specified and directed.

M & L for providing reinforced cement concrete M- 25 (Design Mix), using 20 mm graded stone aggregate as in chajjas complete all as specified and directed.

M & L for providing reinforced cement concrete M- 25 (Design Mix ) using 20 mm graded stone aggregate as in slab, etc complete all as specified and directed.

M & L TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending and incl. mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L TMT bars 6mm to 8mm dia cut to length, bent to shape required incl. stirrups spacers and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for use and waste of formwork to sides and soffits of floor, lintels band & beams including supports, overhangs, etc. with rough finished surface of concrete complete all as specified and directed.

M & L for use and waste of formwork to chajjas including edges with rough finished surface of concrete all as specified and directed.

M&L for Use and waste for form work to soffits of suspended concrete slabs for fair finished concrete surface flat surface complete all as specified and directed..

M&L for rendering 15 mm thick in CM 1:4 on other than fair faces of brick or concrete surfaces finishing even and smooth without using extra cement complete all as specified and as directed .

M&Lfor rendering 5 mm thick in CM 1:3 in ceiling / Chhajja's finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of wall care putty on walls over a coat of primer complete all as specified and directed.

M&L for applying two coats of acrylic exterior emulsion paint (Apex) over a coat of primer incl over a coat of wall care putty after preparation of newly plastered/concrete surfaces on wall complete all as specified and directed.

M&L for prepration of new plastered surface and applying three coat of white wash on ceiling complete all as specified and as directed.

M & L broken stone or boulder hardcore of gauge n exc. 63 mm, deposited, spread and leveled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in plinth protection and foot path etc. finished even and smooth without using extra cement and laid in panels with joint filling complete all as specified and directed.

M & L 75mm thick PCC 1:4:8 type D-2 (40mm graded aggregate) in sub base complete all as specified and directed.

M&L for coloured Glazed ceramic tiles in vertical surfaces 450 x 300x 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over 10mm thick rendering or bedding layer of cement mortar 1:4 complete all as specified and directed.

M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:4 as in floor finished rough to receive floor/screed complete all as specified and directed.

M & L for machine cut Kota stone slab 16-18 mm thick as in floor/ treads of steps laid over and including 15 mm thick screed in cement mortar (1:4), set & jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed.

M & L for machine cut Kota stone slab 16-18 mm thick as in risers to steps, skiting/dado, pillars, window cills and the like, laid over and including 10 mm thick rendering in cement mortar (1:4), set & jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed.

M&L rubber moulded (coloured glossy finish) factory made with vibratory table method,precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness , M-35 grade, including and over 25 mm thick sand cushioning for laying of inter locking tiles (paving blocks) complete all as specified and directed. (Note : Design/shade of rubber moulded machine presses precast concrete Paver block shall be as approved by GE/Engr-In-Charge.

S&F for 15mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and directed.

S&F for 20mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and directed.

S&F 15mm dia brass chromium plated Bib tap fancy type with wall flange complete all as specified and directed.

S&F 15mm dia brass chromium plated pillar tap with fly nut capstan head screwed for 15mm bore dia of pipe complete all as specified and directed.

S&F 15mm bore dia fancy type, chromium plated angle valves, cast copper alloy,screwed down,high pressure, with crutch , screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 15mm bore dia stop valve fancy type, chromium plated with long shank and cup (concealed type), cast copper alloy,screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F chromium plated brass shower rose 125mm size with swivel joint and shower arm complete all as specified and directed.

S&Fvitreous china white wash hand basin flat back of size 550x400mm including CI/MS brackets including cutting for and pinning in brackets but including waste pipe complete all as specified and directed.

S&F vitreous china water closet Orissa pattern of size 580 X440mm white with PVC 'P' or 'S' trap including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified and directed.

S&F PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and directed.

S&F PVC cowl 50mm complete all as specified and directed.

S&F 75mm bore PVC bends or tee (any radius ), diminishing pieces or tapers fitted with oval acceess doors complete all as specified and directed.

S&F PVC trap with grating including jointing waste pipe in runlead 75mm dia fixed in cement concrete type B-1(1:2:4) and SS gratings complete all as specified and directed.

M&L for 75mm dia PVC pipe & vent pipe spun pipe any length with or without ears with cement joints fixed to walls or laid in trenches complete all as specified and directed.

S&F Vitreous China Urinal, Half stall type,white complete including providing and fixing plugs, bedding urinal agianst wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S & F rotational moulded PVC water storage tank cylinderical, verticle with closed top hoisted and fixed in position tank capacity 1000 Ltr with and including PTMT float valve 20 mm dia & making connection for inlet and outlet complete all as specified & directed. Make :- Vectus/ Sintex Neo/ SFMC.

S&F gun metal globe gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe etc complete all as specified and directed.

S&F 15mm bore gun matel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified and directed.

S&F windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM) and Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters. Fly mesh with 20 mm GI flat beading for provision of guard bars/ grills. Fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stainless steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter with 0.36mm dia of wire and 1.40mm aperture. Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 12mm square guard bars with 110mm spacing c/c (Horizontal bay) to be welded on FI 20x6mm alaround except runner portion complete all as specified and directed. (Make :- Tata Pravesh/ NCL Buildtek Ltd/ Elixir Met Form Pvt Ltd.)

M & L Solid (100 mm X 63 mm single rebate) factory made 100% solid WPC brown door frame made from 100% LEAD FREE (Single extruded process) material with density 780 kg / Cum & manufactured by an ISO: 9001-2015 certified company, all as per specification drawings as directed by the Engr-in- Charge. The door frame should be water proof, termite proof, fire retardant and having excellent screw holding capacity complete all as specified and directed.

M& L Solid (125mm X 63 mm Double rebate) factory made 100% solid WPC brown door frame made from 100% LEAD FREE (single extruded process) material with density 780 Kg / Cum & manufactured by an ISO:9001-2005 certified company, all as per specification drawings as directed by the Engr-in-Charge. the door frame should be water proof, termite proof, fire retardant and having excellent screw holding capacity complete all as specified and directed.

M& L 30 MM thick moulded plain WPC solid door shutter: Providing (30mm thick) MOLDED WPC Brown factory made 100 % solid door (Confoming As per IS :4020) Made from 100% LEAD FREE single extruded with 2,4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600Kg/Cum. manufactured by an ISO:9001-2005 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified and directed.

M&L for 30mm thick brand factory made wire mesh solid WPC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 20mm x 40mm for stiles and 20mm x 40mm for top, lock & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacturer complete all as specified and directed.

S & F 100 mm size butt hinges of medium weight cold rolled stainless steel complete all as specified and directed.

S & F 300mm long stainless steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet complete all as specified and directed.

S & F 200 mm long stainless steel, barrel tower bolts of extruded section complete all as specified and directed.

S & F 150 mm long stainless steel handles, cast type, anodised complete all as specified and directed.

S&F 150mm internal dia of pipe salt glazed stoneware drain pipes grade 'A', laid in trenches and jointed in CM 1:1, complete all as specified and directed.

M&L for concrete bed in PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.

M&L for PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

M&L for reinforced precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary form work, set in CM 1:4 complete all as specified and directed. (Note : Reinforcement shall be measured and paid for separately)

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

M & L for point wiring (concealed) complete with FR PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in including non metallic medium grade rigid PVC conduit accessories, ISI marked, 19/20 mm dia including all accessories on the surface of walls/floors/ceilings and making good the disturbed surface, with and including sunken type pressed steel/welded MS terminal box 1.2 mm thick bakelite laminated sheet top cover 3 mm thick and 1.5 Sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed by EIC.

One light point controlled by one switch.

One ceiling fan/exhaust fan controlled by one switch.

One 3 pin socket outlet 5 Amps on the same board.

one 3 pin socket out let 5 Amps on the independent board.

All as per Item No. 82 above but 2.5 Sq mm multi stranded copper conductor with 2.5 Sq mm copper earth continuity wire connected to earth duly complete for one 15A Socket on Independent board complete all as specified and directed.

Supply and fixing surface & wall mounted LED batten 4 feet with 1x20 Watt indoor decorative luminaries with and including electronic driver and 1x20 watt LED Lamp, pre-wired including necessary electric connection with copper flexible PVC cable of 0.50 Sq mm 3 core not more than 1 mtr in length from ceiling rose/connector to light fitting complete all as specified and directed.

S & F angle lamp holder, PVC Polycab type with back plate suitable for batten fittings complete all as specified and directed.

S & F Socket outlet, flush type 2 in 1, 5 pin, 5 amps, 240 volts complete all as specified and directed.

S & F switch piano flush button single pole one way 15 amp 240 volts complete all as specified and directed.

S & F Socket outlet 2 in 1, 3 pin, 5 and 15 amps, flush type, 240 volts complete all as specified and directed.

S & F switch piano flush button single pole one way 5 amp 240 volts complete all as specified and directed.

M & L for ceiling rose, surface bakelite, 65 x 50 mm, three terminals all as specified and as directed.

S & F sheet metal enclosures for SPN DB's with double glazed door for incorporating MCBs,IP-43 , 8 way with 200 amps rated busbar, 240 volts, as per IS-8623 all as specified and as directed.

S & F MCBs SPN 32 amps, 240 volts, 50 Hz, 'C' curve including necessary incoming and out going electric connection with suitable size of copper lugs complete all as specified and directed.

S & F MCB SP, 6 to 32 Amps, 240 volts, 50 Hz, 'C' curve including necessary incoming and out going electric connection with suitable size of copper lugs complete all as specified and directed.

Material and labour for XLPE insulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 10 sqmm ,4 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers etc and testing complete all as specified and directed.

M & L for brick sub class 'B' 250mm x 115mm x 0.75mm and laid in trenches as in protection of UG cable complete all as specified and directed.

Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and as directed.

M & L for 50mm bore GI pipe (Light grade) laid under road or fixed with pole/wall of culvert as in protection of UG cable incl necessary MS clamp and complete all as specified and directed.

Supply and fix exhaust fan steel body, heavy duty, 4 blade type, double ball bearing , AC sigle phase, 230 volts, of size 300 mm sweep with blades and frame and louvers complete all as specified and directed.

Supply, fixing and testing Ceiling fan complete with all accessories, 230 V, 1400 mm sweep, with minimum air delivery 245 CFM and service value 6.0, BLDC type, BEE 5 Star rated, 03 blade type, double ball bearing Copper wound, 50 HZ, AC supply, complete all as specified and directed.

Supply, fixing and commissioning water heater storage type, electric operated, capacity 25 litres, BEE 5 Star rated, Copper inner tank, complete with all connected accessories suitable for AC supply, 240 volts, 50 Hz including connecting with water supply pipe line and all water and electrical connection complete all as specified and directed.

M & L for Earthing complete with galvanised steel pipe electrode, 600 x 600 x 6.3 mm thick, buried directly in ground (earth pit not less than 2.25 mtrs deep below nominal ground level) with top edge of the plate not less than not less than 1.5 metres below nominal ground level connected to galvanised earthing lead of 4 mm dia of iron or steel wire all as shown in electrical plate No. 5 complete all as specified and directed. Note :- the cost of excavation and earth work PCC pit and CI cover funnel & watering pipe, wiremesh, charcoal dust and common salt shall be deemed included in the unit rate for earthing all as specified and as directed by EIC.

M & L cutting existing steel tubing for alterations or additions (Each cut measured) in 50 mm bore pipe line complete all as specified and directed.

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.

V R Associates

SWASTIKA BUILDERS

High Tech Metal India

RADHA ENTERPRISES

sidh builders

M/s RK ENTERPRISES

M/S GOPAL JEE SINGH

M/S VIJAY TRADERS

PAWAN KUMAR