Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.6 LAccepted-Finance | ₹12.6 L | L1 | Accepted-Finance Due to lowest rate |
| 2 | L2₹12.7 L+₹16,750 (1.33%)Rejected-Finance | ₹12.7 L+₹16,750 (1.33%) | L2 | Rejected-Finance Due to highest rate |
| 3 | L3₹13.0 L+₹42,425 (3.38%)Rejected-Finance VILLAGE PO PALKWAH TEHSIL HAROLI DISTT UNA HP | UNA | HIMACHAL PRADESH | 174301 | ₹13.0 L+₹42,425 (3.38%) | L3 | Rejected-Finance Due to highest rate |
| 4 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Others-The contractor has submit an applicaton on dated 25/07/2026 vide which he has requested to do not open his tender due to quoted some wrong rates. Hence the above bidder is not eligible. |
| Sl No | Description | Qty | Unit | M/S POLLY PHASE NEW ENGINEERING L1 | SUMIT KUMAR L3 | ABHAY SINGH L2 |
|---|---|---|---|---|---|---|
| 1.00Providing and installation of India Mark-III (65mm) India Mark-II (50mm) and India Mark-II extra deep (32mm) deep well hand pumps as per IS 13056 -1991 alongwith its upto date amendments and IS 9301 respectively comprising of following items: | ||||||
| 1.01 | Transporation of suitable truck/Tractor mounted where only road available , DTH and ODEX / percussion calyx /RC drilling with portable rigs alongwith necessary accessories etc to the site of work and erection of portable rig including levelling of site etc. complete in all respect as per direction of the Engineer-in-charge. | 5 | Nos | 4,000 ₹20,000 Lowest | 4,150 ₹20,750 | 4,100 ₹20,500 |
| 2.00 | Drilling bores of 152mm dia as per IS 2800-1979 using ODEX (TUBEX) attachment required drilling in collapsible strata , conglomerate, boulders, pebbles, gravels ,silt , clay etc including cost of attachement ,consumable stores, bits , water , POL etc complete with system of simultaneous lowering of 125mm nominal bore 5.00 mm thick MSERW fincut casing pipe which will be welded together using 2.5mm or 3.25mm dia advani/Oerlikon electrodes with one plain end and the other end chamfered to 50 degree removing paint on the area to be welded , inclusive of the cost of biodegradable and non-toxic foam flush etc complete in all respects as per direction of the Engineer-in-charge. MSERW fincut casing pipe, casing shoe and bit tube as per requirement of ODEX to be paid separately. (5 X 70 =350 Meters) | 350 | Mtrs | 1,620 ₹5,67,000 Lowest | 1,700 ₹5,95,000 | 1,650 ₹5,77,500 |
| 3.00 | Supplying and lowering of IS marked I25mm nominal bore, 5.00mm thick fincut MSERW casing pipes as per IS 4270-2001 and requirment of ODEX attachment from approved manufactures complete in all respects as per directions of the Engineer-in-charge. (5 X 70 = 350 Rmt.) | 350 | Mtrs | 1,760 ₹6,16,000 Lowest | 1,790 ₹6,26,500 | 1,770 ₹6,19,500 |
| 4.00 | Providing and fixing suitable casing shoe and bit tube as per requirement of ODEX attachment complete in all respect as per direction of the Engineer-in-charge. | 5 | Nos | 3,500 ₹17,500 Lowest | 3,570 ₹17,850 | 3,550 ₹17,750 |
| 5.00 | Collection and preservation of soil samples in polythene bags complete in all respect as per direction of the Engineer-in-charge. | 5 | Nos | 35 ₹175 Lowest | 40 ₹200 | 35 ₹175 Lowest |
| 6.00 | Development of bore well and yield testing with Air compressor through V-notch and disinfection etc. complete in all respect as per IS-2800-1979 and as per direction of the Engineer-in-charge. | 40 | Hours | 900 ₹36,000 Lowest | 970 ₹38,800 | 950 ₹38,000 |
Tender Value
₹12.4 L
EMD Value
₹24,873
Closing Date
24 Jul 2026, 11:00 amClosed
Executive Engineer
Jal Shakti Division Shahpur
Drilling of 5 Nos. hand pumps at various locations under Division Shahpur
2026_HPIPH_138968_1
SHP/KNG15-754/EA-I/NIT/2026- 3402-51 dt 13/07/2026
Open Tender
Civil Works
Item Rate
60 days
Shahpur
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Executive Engineer
₹24,873
13 Aug 2026
14 Jul 2026
24 Jul 2026
14 Jul 2026
24 Jul 2026
14 Jul 2026
14 Jul 2026 - 24 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing and installation of India Mark-III (65mm) India Mark-II (50mm) and India Mark-II extra deep (32mm) deep well hand pumps as per IS 13056 -1991 alongwith its upto date amendments and IS 9301 respectively comprising of following items: | |||||
| 1.01 | Transporation of suitable truck/Tractor mounted where only road available , DTH and ODEX / percussion calyx /RC drilling with portable rigs alongwith necessary accessories etc to the site of work and erection of portable rig including levelling of site etc. complete in all respect as per direction of the Engineer-in-charge. | 5 | Nos | - | - |
| 2 | Drilling bores of 152mm dia as per IS 2800-1979 using ODEX (TUBEX) attachment required drilling in collapsible strata , conglomerate, boulders, pebbles, gravels ,silt , clay etc including cost of attachement ,consumable stores, bits , water , POL etc complete with system of simultaneous lowering of 125mm nominal bore 5.00 mm thick MSERW fincut casing pipe which will be welded together using 2.5mm or 3.25mm dia advani/Oerlikon electrodes with one plain end and the other end chamfered to 50 degree removing paint on the area to be welded , inclusive of the cost of biodegradable and non-toxic foam flush etc complete in all respects as per direction of the Engineer-in-charge. MSERW fincut casing pipe, casing shoe and bit tube as per requirement of ODEX to be paid separately. (5 X 70 =350 Meters) | 350 | Mtrs | - | - |
| 3 | Supplying and lowering of IS marked I25mm nominal bore, 5.00mm thick fincut MSERW casing pipes as per IS 4270-2001 and requirment of ODEX attachment from approved manufactures complete in all respects as per directions of the Engineer-in-charge. (5 X 70 = 350 Rmt.) | 350 | Mtrs | - | - |
| 4 | Providing and fixing suitable casing shoe and bit tube as per requirement of ODEX attachment complete in all respect as per direction of the Engineer-in-charge. | 5 | Nos | - | - |
| 5 | Collection and preservation of soil samples in polythene bags complete in all respect as per direction of the Engineer-in-charge. | 5 | Nos | - | - |
| 6 | Development of bore well and yield testing with Air compressor through V-notch and disinfection etc. complete in all respect as per IS-2800-1979 and as per direction of the Engineer-in-charge. | 40 | Hours | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.80 MB
Form6and8.pdf
Tender Documents • 0.80 MB
Termsandconditions.pdf
Tender Documents • 0.35 MB
BOQ_205835.xls
BOQ • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .