NABARD-Cherupuzha thodu RCB Motorizing-Supply, fabrication, painting and erection of new geared motor unit and accessories for motorizing 6nos mechanical shutters of Cherupuzha Thodu RCB at Mankada Assembly Constituency, Malappuram district

Amount

Supply, fabrication, painting and erection of geared motor unit and accessories for motorizing 6nos regulator shutters

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

OD31522/2023-2024:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD31521/2023-2024:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD31520/2023-2024:Supply of MS round bar including cost of conveyance charges

OD31651/2023-2024:Supply of MS BOLT and NUT up to 300mm Length including cost of conveyance.

OD31652/2023-2024:Fabrication and supply of Structural steel for Motor-gear box unit frame ( Up to 2 tonne weight ) and accessories etc. as per approved specifications, drawings and directions of deptl. officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc. complete but excluding cost of material already supplied

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD31653/2023-2024:Erection of the steel structures for motor-gear box unit frame in correct alignment and anchoring it ; setting and aligning the covers of the unit etc complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied

OD31654/2023-2024:Supply and fixing of 3 HP MOTOR and REDUCTION GEAR UNIT driven through self locking worm reducer, coupling mechanism for engaging/disengaging including cost of all materials, labour, hire charges and conveyance.

OD31657/2023-2024:Supplying and fixing of MAIN PANEL BOARD including electrical accessories etc. complete including cost of materials, labour, incidental charges etc.

OD31656/2023-2024:Supplying and fixing of individual STARTER BOARD including cost of all labour, materials, incidental charges etc.

OD31655/2023-2024:ASSEMBLING the Motor and gear box mechanism to the bridge and conducting TRIAL RUN.

V M Asharaf

Bidder Name

Kinanath V P

V M Asharaf