GE-K-51-2022-23 - SPECIAL REPAIR TO BLDG NO. 7260 T-137 AT KM-167 ORs LIVING LINE AT DRAS STATION UNDER GE KARGIL

Amount

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust & Brushing neat cement slurry with 3.0kg of cement per sq. metre etc complete all as specified and directed

M&L machine cut Kota stone slab flooring 20-25mm thick, over cement screed bed or bedding layer of cement mortar 20mm thick in CM 1:4 for laying floor finishes base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level )and removing unserviceable material outside cantt area complete all as specified and directed

M&L PCC type B0 1:2:4(12.5mm graded aggregate) 25mm thick as in sub base floor to receive tile/ Kota stone all as specified.

M&L Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exc 0.06 and n.exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over 15 mm screed bed in CM 1:6 complete all as specified and directed

M & L glazed ceramic coloured tiles in vertical surface of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing tiles over 15mm thick rendering in cement mortar 1:4 complete all as specified and directed

Dismantling of plain or corrugated CGI/PGI steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed

S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/blankets, any thickness, including cover fillets complete all as specified and directed

S&F 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber frame work complete, all as specified and directed

S&F, 9 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed in ceiling flat or sloping with nails to timber frame work complete, all as specified and directed

M&L for Plain fillets of second class soft wood (KAIL), sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm in square, rectangular or traingular in section, clean sawn secured with nails or brads incl. dismantling of fillets complete all as specified and directed

M&L for fillets of second class soft wood (KAIL), sectional area not exceeding 3 Sqcm in section, bullnosed, splayed, chamfered or rounded on one edge or face secured with nails or brads complete all as specified and directed

M&L for side cornice fillets of second class soft wood (KAIL), sectional area exceeding 3 Sqcm but not exceeding 6 Sqcm in section, bullnosed, splayed, chamfered or rounded fixed with nails to timber frame work incl. dismantling of fillets complete all as specified and directed

Taking down steel chowkats or frames not exc 1.5 Sqm each with shutter/without taking of shutters from the frames complete all as specified and directed

Taking down Shutters of any description exc1.00Sqm but not exc 2Sqm each from the frames complete all as specified and directed

S&F 2nd class soft wood Plain, solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed

S&F 30mm thick 2nd class soft wood glazed & skelton shutters divided into squares , open rebated and prepare to receive glass, guage etc edges of framing plain chamfered or rounded, mitred and rebated sash bars any numbers fitted with cut and mitread beads for securing glass etc fitted to chowkhats complete all as specified and directed

S&F 2nd class soft wood 35 mm thick Plain, framed panelled shutters (any No. of panels), with panel of timber flat on both side or veenered particle board medium density, wood particle board with commercial face veneers fitted to chowkats complete all as specified and directed

S&F 100mm but hinges medium weight cold rolled mild steel fixed with screws or welded complete all as specified and directed

S&F 150mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed

S&F Aluminium handles cast type anodised size 125mm complete all as specified and directed

S&F 250 mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed

S&F 75 mm butt hinges medium weight cold rolled mild steel fixed with screws or welded complete all as specified and directed

S& F 100 mm long alluminium anodized, barrel tower bots exturded section complete all as specified and directed.

S&F aluminium handles cast type anodised size100mmcomplete all as specified and directed

Hacking out broken glass (any thickness from metal frame including punching or drilling out glazing) not exceeding 0.50 sqm complete all as specified and directed

S & F 3mm thick glass pan ordinary quality and glazing with oil putty / wooden beading in square not exc 0.5 sqm each pane complete all as specified and directed

M&L for preparation of new surfaces of wood and wood based material surface of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primercomplete all as specified and as directed.

M&L for prepration of old painted surface of wood and wood based material and one coat of synthetic enamel paint of any description, not otherwise described over 10cm width or girth complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified

S&F Rolled mild steel Gde Fe-410 W (Gde E-250) quality B as in Roof trusses (framed), trussed, purlins crane gantries, rails & fastenings & heavy brackets framimg (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc complete all as specified and directed

M&L for preparation of new steel and iron surfaces of any description , not otherwise described ,over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as speciified and as directed.

M&L for preparation of old steel and iron surfaces of any description , not otherwise described ,over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as speciified and as directed.

Demolition of Brickwork or stone/boulder masonry/PCC blockwork built in cement mortar or cement lime mortar all as speciified and as directed.

M&L for Precast cement concrete Type C1 ,(1:3:6) (using 20mm graded crushed stone agg) block masonary with solid blocks exc 10cm in width and setting in CM 1:6, complete all as specified and directed by Engr-in charge.

Taking up or down steel water tubing of 15mm dia bore and connection incl cleaning for refixing or removal to stores all as specified and as directed

S&F 15mm dia bore GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floor all as specified and as directed

Taking up or down steel water tubing of 20mm dia bore and connection incl cleaning for refixing or removal to stores all as specified and as directed

S&F 20mm dia bore GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floor all as specified and as directed

S&F in repair 15mm Cast copper alloy, Chromium Plated Bib taps fancy type with crutch or butterfly handle, screwed for iron pipe or for brass pipe of for ferrule and fixed complete all as specified and directed

S & F in repair Towel rail 600 mm long PTMT fixed with and incl chromium plated brass screws and wooden/ plastic cleats (Min Wt 170 gms) complete all as specified and directed

Dismantling water storage tanks of capacity exc 500 & n.exc 1000 ltrs and removing to store complete all as specified and as directed

Supply and fixing rotational moulded polyehtylene water storage tank of 1000 ltrs capacity (Cylindrical vertical with closed top) in position all as specified in SSR Part-I complete all as specified and directed

S&F in repair Vitreous china wash basin,white,angle back size 550x400mm excluding taps, waste chain and plug and porcealin stopper but incl brackets complete all as specified and directed

S&F in repair pillar tap 15mm bore chromium plated screwed down, thigh pressure with or without lettered (hot or cold) with long screwed shankes and fly nuts scrrewed for inor pipe complete all as specified and directed

S&F in repair Stop valves/Angle Cock cast copper alloy, screwed down high pressure with crutch or butterfly handle for 15mm bore pipecomplete all as specified and directed

S&F in repair PVC connection 15mm size with PTMT nuts or length 450mm complete all as specified and directed

S&F in repair PVC waste pipe 32mm dia and 75cm long incl waste coupling complete all as specifed and directed complete all as specified and directed

S&F in repair PVC(SWR) pipes single socketed any length, with rubber rings joints laid in floors incl jointing with solvent cement ,dia mtr of out let 75mm dia bore complete all as specifed and directed.

S&F PVC (SWR) bends any radius 75mm dia complete all as specifed and directed.

S&F in repair Gun metal globe or gate valve with iron wheel head secrewd bolt ends for iron pipe and fixed of 20mm bore dia all as specifed.

S&F in repair grating doom 125 mm dia with or without waste hole of PTMT all as specified and directed . (Minimum weight 40gms)

S&F in repair galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples all as specified and directed

S & F PVC(SWR) 'S' or 'P' trap 110mm bore complete all as specified.

M&L PCC Type C2 1:3:6 (40mm graded aggregate) 75mm thick as in plinth protection fair and even smooth without using extra cement all as specified and as directed.

S&F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc all as specified and as directed by Engr-in-Charge

Taking down carefully copper or aluminium point wiring (light, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, sockets bulk, head fitting, tube light fitting by unscrewing carefully from boards etc and making good, distrubed surface of walls floors etc.

M&L for Point wiring with multi-stranded copper conductor PVC insulated and unsheathed cable in PVC casing and capping, 1.5 Sqmm with all fittings/accessories and including 1.5 Sqmm PVC insulated copper earth wire connected to common earth including closed recessed wooden terminal Boxes of suitable size made of 2nd class hard wood for mounting switches, sockets etc with 3mm thick laminated sheet cover for one light point or bell/buzzer point controlled by one switch, complete.

All as per Srl item No 62 here in before but for one 3 pin socket outlet 5 Amps on independent board.

All as per Srl item No 62 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 15 Amps independent board.

S & F Switch piano flush type 5 Amps, single pole one way.

S & F Switch socket combination 2 in 1, and 3 and 2 pin, 5 Amps flush type.

S & F Switch socket combination 2 in 1, 5 and 15 Amps flush type.

Supply and fixing in LED 1x18 Watt, 220 V, AC decorative box type with driver, holder including LED tubelight connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S & F in Ceiling rose surface bakelite 65x50mm, two to three terminals.

Dismantling of existing MCB box, MCBs, rectangular box, service bracket from surface for replacement with new one.

S & F in replacement Sheet metal enclosure for DB's Single door, single pole and neutral, 240V, 8 way with 200 Amp rated bus bar including blanking plates where required. Complete all as specified and directed.

Supply and fixing in replacement 240 V 10 KA C curve miniature circuit breaker (MCB) SPN 40 to 63 Amp in the MCB DB complete with connection testing and commissioning.

Supply and fixing in replacement 240 V 10 KA C curve miniature circuit breaker (MCB) SP 5 to 32 Amp in the MCB DB complete with connection testing and commissioning.

S & F PVC rectangular block for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover of size 200x150x50 mm deep

M&L in repair for House Service bracket (hook type) complete with 3.0 m long G.I pipe 40 mm dia (medium grade), two numbers 90° bends, M.S hook and stay including taking down the existing unserviceable bracket. NOTE :- The unit rate shall to include for :- (a) Cutting holes in walls etc. of any description, grouting rag bolts and making good with cement mortar 1:3 including making good finishing to match the existing work and removing rubbish off the premises as directed (in case of bracket being fixed to masonry wall). (b) G.I pipe house service bracket hook type fabricated out of 3.0m long screwed G.I pipe of medium grade and comprising of two number 90° bend (pipe dia) screwed tight to the top ends of the service vertical limb, the two ends of the service provided with two number of turned spit tight fit, well seasoned teak wood bushing and the bracket fixed plumb vertical against the wall with two number flat iron clamps (fabricated out of 50 x 6mm flat iron with 4 No. 16 mm dia ragged bolts of appropriate size with screwed ends, tightened with 16 mm dia nuts with 6 mm thick washer against the clamp tightening collar.

Dismantling of existing earthing and replacemet of Earthing complete with galvanised steel earth plate electrode 600mm x 600mm and 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connected to the Galvanized iron earth wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel as shown in electrical plate No. 3 conected to earth test point as specified or indicated including testing on completion.

Dismantling of existing service cable and submain wiring including casing caping from existing surface for replacement

S & F Sub main wiring with two single core 6 sqmm multistranded copper conductor cable, PVC insulated cable 1100 volts grade and 6 Sqmm as continous earthing drawing and including PVC casing and caping of suitable size with all acessories, complete all as specified.

S&F in replacement 1100 volts grade heavy duty 10 sqmm 2 core flat cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 01 metre apart including 4 mm suspension complete all as specified.

S&F in replacement LED light fitting 1x9W/1x10W bulkhead luminaries including LED light driver holder connecting up three core flexible copper conductor cable of suitable size.

Note : Deduction for amount of Rs 32201.00 as listed in Schedule A Part - II ( Schedule of Credit) shall be made while awarding of contract.

M/s B R Constructions

M/S BHAT ENGINEERS

M/S BILAL AHMAD BHAT