Repair to Leakage/seepage, Joinery, flooring, ceiling, sanitary fittings, plastering, Painting, Approach Path, Drain and internal Electrification of 414 Fd Hosp, SHO (L), MDC, 127 Inf Bn (TA), PBG Estate, 110 MC/MF Det and 4/4 GR under AGE B/R-I of

Amount

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

M&L for brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete all as specified.

M&L for brick work with sub class 'B' brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall complete all as specified and directed.

M&L for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and fair complete all as specified

M&L for 15 mm thick rendering in cement mortar 1:4 on brick work or concrete surface, surface finished even and fair Complete all as specified and directed.

M&L for 10 mm thick rendering on celing surface in cement mortar 1:3 mixed surface finished even and smooth complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and directed.

M&L for preparation of wall and applying exterior grade acrylic water proof wall care putty 2 to 3mm thick to make the surface smooth as specified and directed by Engr-in-Charge.(Make : Berger/Asian/JK/Birla)

M&L for preparation of wall and applying interior grade wall care putty 2 to 3mm thick to make the surface smooth as specified and directed by Engr-in-Charge.(Make : Berger/Asian/JK/Birla

M&L for preparation of old decorated surfaces of walls (plastered) by brooming down with coir wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and finally clean with sand paper all as directed by Engr-in-Charge.

M&L for complete removal of existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper all as directed by Engr-in-charge.

M&L for for preparation of old decorated surfaces of ceiling by brooming down or sand paper, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and directed.

M&L for one coat of oil bound distemper in any tint on already prepared surfaces of walls complete all as specified and directed by Engr-in-Charge

M&L for two coats oil bound distemper any tint on already prepared surfaces of walls over a coat of primer complete all as specified and directed by Engr-in-Charge.

M&L for two coat of cement base paint on already prepared surfaces of walls over a coat of primer complete all as specified and directed Engr-in-Charge.

M&L for one coat of cement base paint on already prepared surfaces of walls complete all as specified and directed by Egnr-in-Charge.

M&L for preparing, of old decorated surfaces of wall, pillasters, cornices, AC sheet etc. by washing, rubbing down & scrapping with steel wire brass, emrypaper, steel plate etc and applying one coat of exterior emulsion paint complete. Make : Asian Paints (Apex Ultima), Berger (all guard), Nerolac.

M&L for for one coat of white wash on already prepared surfaces of walls complete all as specified and directed by Egnr-in-Charge.

M&L for for one coat of white wash on already prepared surfaces of ceiling complete all as specified and directed by Egnr-in-Charge.

M&L for preparation of newly plastered surface of wall and applying two coat of oil bound distemper over a coat of primer complete all as specified

M&L for preparation of newly plastered surface of wall and applying two coat of cement base paint over a coat of primer complete all as specified

M&L for preparation of newly plastered surface of wall and applying two coat of exterior emulsion paint over a coat of primer complete all as specified

M&L for preparation of newly plastered surface of wall and applying three coat of white wash complete all as specified

M&L for preparation of newly plastered surface of ceiling and applying three coat of white wash complete all as specified

M&L for non skid / mat finish ceramic colour tiles of size 300 mm x 300 mm and 6- 7 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete.

M&L for non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x6- 7 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 and dismantling of existing tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed..

Description same as per item No 26 above but as in skirting including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed..

M&L for glazed ceramic colour tiles size 300 mm x 450 mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 and dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified

M&L for vitrified ceramic coloured tiles 10 mm thick (square/rectangular) polished,area of each tiles not exceeding 0.36 sqm, in floor etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified

All as per itme No 29.00 here in above but as in skirting and including 10 mm thick rendering in cement mortar 1:4, complete all as specified

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregate as in leveling course to floors complete all as specified

M&L for 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement complete all as specified

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete, sub base or leveling course of floor etc complete all as specified

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in surface channel and drain including necessary use and waste of form work complete all as specified

M&L for 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring, laid in alternate bays, surface finished even and smooth with using extra cement complete all as specified

M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified

M&L for grinding and polishing to edges and rounding of granite kota or marble slab and smooth finishing complete all as specified and as directed

M&L for grinding and polishing to existing kota stone flooring, udaipur green slab flooring, terrazo flooring etc complete all as specified.

M&L for Machine cut kota stone slab flooring 15-18mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specifeid

M&L for Machine cut kota stone as in skirting 15-18 thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 complete all as specifeid

M&L for heavy duty skid proof vitrified coloured tiles 300x300mm, 10 mm thick dark shade (square/rectangular) in floor, parking, path etc, jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed..

M&L for coloured prepolished rubber moulded chequred cement concrete tile 30 cm x 30 cm x 20 to 22 mm thick with spacers 3mm set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed..

Taking down and re-fixing the existing shutter in same opening after & including necessary easing/repair etc. exc. 1 Sqm but n. exc. 2 Sqm each complete all as specified and directed.

Taking down and re-fixing the existing shutter in same opening after & including necessary easing/repair etc.n exc. 1 Sqm complete all as specified

Taking down shutter of any description, n. exc. 1 Sqm each and removing from site complete all as specified

All as per itme No 46.00 here in above but exc. 1 Sqm but n. exc. 2 Sqm each and removing from site complete all as specified

Taking down chowkhats or frames n. exc 1.5 sqm each without taking off shutter from the frame complete all as specified and directed..

All as per itme No 48.00 here in above but exc. 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed..

S & F second class hardwood (Golden Teak) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed..

S & F 35mm thick second class hardwood (Golden Teak) glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified.

S & F 30 mm thick second class hardwood (Golden Teak) glazed and Skelton factory made window/ventilator shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass / gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24(b) and as directed

All as per item No 53.00 here in above but 30 mm thick without sash bar for window/ventilator shutter all as specified in SSR Part-I clause 8.24 b.

S&F 30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified.

S&F factory made 100 % solid wood plastic composite (WPC) door frame 75x50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof, termite proof, fire retardant and having good screw holding capacity all as per specification and drawing as directed by Engineer-in-Charge.

S&F Pressed steel frames of size 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified (Note: Frame filled with cement concrete1:2:4 type B0 ( 12.5 mm stone aggregate)

S&F Pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified (Note: Framed filled with cement concrete1:2:4 type B0 ( 12.5 mm stone aggregate)

M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, ball bearing and other similar works etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding complete all as specified.

S&F mild steel, plain, black sheet 0.80 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitered angles, etc. as required complete all as specified.

S & F factory made steel window with side hung shutters including box type hinges with steel handle, steel peg stay,tower bolt etc. complete with glazing bars, dovetailed or welded complete all as specified

S & F factory made steel window with side hung shutters including box type hinges with steel handle, steel peg stay, tower bolt etc.complete without glazing bars, dovetailed or welded complete all as specified

S & F factory made steel ventilator with top hung shutters including hinges with steel handle, steel peg stay, tower bolt etc.complete all as specified

S&F stainless steel wire 0.56 mm nominal dia of wire and average width of aperture 1.40 mm as in wooden or metal frame of any description complete all as specified and as directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square area n. exc. 0.5 Sqm in each pane complete all as specified

S&F in repair stainless steel wire 0.56 mm nominal dia of wire and average width of aperture 1.40 mm as in wooden or metal frame of any description complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified.

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified and directed.

S&F factory made 100 % solid wood plastic composite (WPC) flush type shutter of 18mm thickness one side laminate consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of denisity 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. The thickness i.e. edges of shutter shall be painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc complete as per manufacture specification

S&F magnetic catcher and striking plate including letting in and fixed complete all as specified and directed.

S&F Continious (PIANO) hinges, mild steel, bright finish or electrogalvanised. 30 mm width of flaps (when open) complete all as specified as directed.

S & F stainless steel barrel tower bolts 150 mm long one piece and fixed complete all as specified

S & F stainless steel barrel tower bolts 200 mm long one piece and fixed complete all as specified

S & F stainless steel butt hinges, medium weight 75 mm long one piece and fixed with screws/welded to frame ,complete all as specified

S & F stainless steel butt hinges, medium weight 100 mm long one piece and fixed with screws/welded to frame ,complete all as specified and directed.

S & F stainless steel handles 150 mm long one piece and fixed with screws/welded to frame ,complete all as specified and directed.

S & F stainless steel handles 125 mm long one piece and fixed with screws/welded to frame ,complete all as specified and directed.

S&F Hasp and staple 75mm safety type, stainless steel with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F 300 mm long stainless steel sliding door bolt (bolt not less than 12 mm dia) with hasp & staple and fixing clips of SS sheet, and SS fixing bolts and fixed complete all as specified and directed..

M&L for floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor of size 140 mm complete all as specified and directed..

S & F in 300 mm stainless steel, ordinary rat tail rod pattern spring welded to steel/fixed to wooden door frame including roller and roller plate complete all as specified and directed..

S & F in repair stainless steel barrel tower bolts 200 mm long one piece and fixed complete all as specified

S & F in repair stainless steel butt hinges, medium weight 75 mm long one piece and fixed with screws/welded to frame ,complete all as specified

S & F in repair stainless steel butt hinges, medium weight 100 mm long one piece and fixed with screws/welded to frame ,complete all as specified and directed.

S & F in repair stainless steel handles 150 mm long one piece and fixed with screws/welded to frame ,complete all as specified and directed.

S & F in repair stainless steel handles 125 mm long one piece and fixed with screws/welded to frame ,complete all as specified and directed.

S&F in repair Hasp and staple 75mm safety type, stainless steel with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F in repair 300 mm long stainless steel sliding door bolt (bolt not less than 12 mm dia) with hasp & staple and fixing clips of SS sheet, and SS fixing bolts and fixed complete all as specified and directed..

M&L for in repair floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor of size 140 mm complete all as specified and directed..

S & F in repair 300 mm stainless steel, ordinary rat tail rod pattern spring welded to steel/fixed to wooden door frame including roller and roller plate complete all as specified and directed..

M&L for applying two coats of indigo floor paint on concrete surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed..

M&L for applying two coats of Synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified

M&L for preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel Paint complete all as specified

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and profile should match with galvalume sheet complete all as specified and as directed..

M&L for 6 mm thick asbestos cement corrugated or semi corrugated sheets in roof fixed with 'L' type or J type or cranked hook bolts complete all as specified

Dismantling of framed or unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed

S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-W(Gde E-250) quality-A complete all as specified and directed

M&L for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed..

M&L for applying one coat of synthetic enamel paint on old painted steel surfaces of any description including preparation of steel surfaces complete all as specified and directed..

S&F in repair SS grade 204 drapery rod 20mm dia including decorative brackets, decorative finals at both ends complete all as specified and directed..

Taking up or down steel tubing and connection incl removal from site bore of pipe 15mm complete all as specified

Taking up or down steel tubing and connection incl removal from site bore of pipe 20mm all as specified and directed..

Refixing of old steel tubing and connections in new or old position with all new fittings to floor, wall or ceiling as directed, for 15mm bore GI tubing complete all as specified and directed..

Refixing of old steel tubing and connections in new or old position with all new fittings to floor, wall or ceiling as directed, for 20mm bore GI tubing complete all as specified and directed..

S&F 15mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.

All as per item No 107 above but 20mm all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed.

S&F in repairs PVC connection 15 mm dia 450 mm long with brass fly nut at both ends complete all as specified.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including cantilever brackets of suitable angle iron, waste coupling , superior quality PVC waste pipe and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including cantilever brackets of suitable angle iron, waste coupling ,superior quality PVC waste pipe and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Taking down and refixing stainless steel sink of any type and size including bedding in cement mortar to dwarf wall or including cantilever brackets of suitable angle iron, superior quality PVC waste pipe and connecting union to pipe complete all as specified and directed

S & F in repairs, vitreous china wash down water closet pedestal pattern white (excluding flushing cistern and flush pipe) with CI ‘P’ or ‘S’ trap including plastic white sheet cover, CP jet spray with 1.0 metre long PVC pipe, connecting to stack pipe and to flushing pipe and complete including making good to floor complete all as specified and directed.. Make : Jaquar CNS-WHT-551PN or equilant of Hindware/Cera

S & F in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and directed. Make : Hindware/Cera/Jaquar.

S&F in repairs Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified. Make :Jaquar CNS-WHT-105N or equilant of Hindware/Cera

S & F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete all as specified and directed.Jaquar CNS-WHT-5201C or equilant of Hindware/Cera

S & F in repair75 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall / laid in trenches complete all as specified.

S & F in repair 110 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall/ laid in trenches complete all as specified.

S & F in repair 75 mm bore UPVC (SWR) bend with oval acess door ,'T'socket reducer etc complete all as specified and directed.

S & F in repair 110 mm bore UPVC (SWR) bend with oval acess door ,'T'socket reducer etc complete all as specified and directed.

S&F in repairs heavy duty thread type PVC water tank cover with fixing frame fixed on PVC tank with 4 Nos of screws for 500/1000 ilts tank complete all as specified and directed by the Engr-in-Charge.

S & F in repair vitreous china wash hand basin white, oval type counter top of size 555mmx425x195mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe, waste fitting etc. complete. Make : Jaquar (FLS-WHT-5701) or equilant of Hindware/Parryware.

S & F in repair vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of waste fitting etc complete. Make : Jaquar FLS WHT-5801 or equilant of Hindware/Cera

S&F in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. Make : Jaguar/Cat part No. KUP-35001BPM / Hindware Cat Part No:F370001 / Parryware Cat Pat No.T4302A2.

S&F in repair CP brass 3 in 1 hot & cold 15 mm dia wall mixer for mixing hot and cold water with telephonic shower provn with connecting legs & flanges complete all as specified and directed. Make : Jaquar Model No CON 281KN, HSN-1653 or equilant of Hindware/Parryware

S&F in repair 15mm dia brass chromium plated centre hole wash basin/ sink mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. Make : Jaguar CAT Part No SOL-6001B/Hindware CAT Part No F450009/Parryware CAT Part No G0665A1

S&F in repair brass chromium plated ovehead shower with shower arm complete all as specified and directed. Make : - Parryware Cat Part No T9985A1(Shower) & T-9999A1(Arm)/Hindware Cat Part No F160054 (Shower) & F190016(Arm)/Jaquar Cat Part No OHS 1989 (Shower) & SHA479L300 (Arm).

S&F in repair 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. Make : - JAGUAR Cat Part No FON-40053/Hindware Cat Part No F160017/Prayag Cat No 9410

S&F in repair 15mm bore Bib taps long body cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make : - JAGUAR CAT Part No ALI-85037/Hindweare CAT Part No F-370004/Prayag CAT Part No S9906

S&F in Repair Bib tap long body standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified. Make Prayag/ parrayware/hindware

S&F in repair CP Health Faucet with 1.20 mtr metalic expandable tube & hook complete all as specified and directed. Make : Jaquar Cat No.ALD-577/ or equilant of Hindware/Parryware

Supply and fix in repair CP grating 100mm to 125 dia round fix on floor/ nahani trap with hole/without fixed with cement mortar, complete all as specified and directed.

S&F in repair looking mirror of size 450mmx600mm or higher size mounted on decorative type PVC frame fixed to PVC plug with CP brackets screw fixed, complete all as specified . Make : Prayag

S & F in repair 20 mm dia brass chromium plated towel rack of 3 tier type 60cm long between flanges including pair of fixing brackets complete all as specified and directed. Make: Jaquar Cat Part No AKP-35781PS/CAN-1181FHS or equilant of Hindware/Parryware

S&F in repairs brass chromium plated towel ring complete all as specified. Make : Jaquar Cat No.AQN-7721 or equilant of Hindware/Parryware

. S&F in repairs chromium plated Toilet paper holder complete all as specified and directed. Make : Jaquar Cat No.ACN -1151N or equilant of Hindware/Parryware

S&F in repairs brass spindle for bib tap, pillar tap, stop cock,angle valve, wall mixture and basin mixture of any description etc, complete all as specified and directed.

S&F in repair 32 mm waste fittings/coupling, stainless steel for sinks, basins, etc. with long screwed shanks and fly-nuts complete all as specified.

S & F in repair 32 mm dia PVC waste pipe for WHB and sink 90 cm long with union, complete all as specified and directed. equivalent).

S&F in repair Urinal Flat Back of size 355x340x535 mm with chromium plated bottle trap fixed to wall complete all as specified and directed. Make: Jaquar UKS-WHT-13261 or equilant of Hindware/Cera

M&L for cleaning of water storage tank capacity exceeding 250 litres but not exceeding 500 litres, mechanically using pressure pump with disinfectant chemical including cleaning & removing all scale & dirt etc from existing tanks, mouths of circulating pipes and outer surface of any description & washing down in the manner.

M&L for cleaning of water storage tank capacity 1000 litres, mechanically using pressure pump with disinfectant chemical including cleaning & removing all scale & dirt etc from existing tanks, mouths of circulating pipes and outer surface of any description & washing down in the manner.

S & F rotational moulded polyethylene water storage tanks Capacity of tank 500 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete all as specified and directed

S & F rotational moulded polyethylene water storage tanks Capacity of tank 1000 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete all as specified and directed

M&L for in repair 75 mm CI spun casted floor trap including jointing with solvent cement 75mm bore outlet complete all as specified and directed.

S & F in repairs ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 15 mm bore size (Minimum weight 142 gms), complete all as specified and directed.

S & F in repairs ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210 gms) complete all as specified and directed.

S&F in repair of Aluminium body door cill at bottom rail of door to stop entry of insect inside the room complete all as specified and as directed.

Providing & fixing false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of

Item No 150 (Contd/--) ...1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 4mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, including taking down existing ceiling of any type all complete at all heights as per direction of Engineer-in-Charge.

S & F in repair aluminum alloy powder coated door made out of hollow extruded aluminum section as mentioned below. Each door having 02 Nos Disc or D type handle, 02 Nos aluminum tower bolt 200 mm size, one brass mortice lock of six lever with key in duplicate regulated by double action hydraulic floor spring heavy duty (Make:- Sandhu/Ritz) shutter to be partly glazed with 5mm thick tined coloured glass in upper pannel and partly pannelled with 12mm thick both side laminated particle board in lower pannel fixed with glazing clip, rubber beading/gasket, anodised aluminum beading screw complete all as specified and directed at site. Chowkhat Frame:- 101.60x44.45x1.60mm Shutter verticle style :- 85x44.45x1.56mm Shutter middle Rail :- 83.50x44.45x1.54mm Shutter Top Rail and bottom Rail :- 114.30x44.45x1.55mm Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata

M&L for powder coated Aluminium partition (Fixed) made out of aluminium powder coated section 83 x 44.45 x 2.00 mm including 5 mm thick glass/ACP Sheet complete with rubber packing/aluminum beading etc including dismantling of exixting structure complete all as specified and directed

Material and labour for aluminum alloy powder coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one nos wire gauged shutter sliding type, 3 track with aluminum sections for 3 numbers sliding windows (Size of track 15mm as per Series-A of Jindal or equilant of any other approved manufacturer), and glazed with tinted glass coloured glass 4mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long etc complete all as specified and directed. Shutter Top & bottom size : 37.50x15x1.60mm Shutter inner lock size 37.50x15x1.60 mm Shutter side (Handle) size 37.50x15x1.36 mm Chowkhat bottom size : 75x26x1.20mm Chowkhat top & sides size: 75x26x1.00mm Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Glass: Saint gobain / Modi guard / Tata

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repair aluminium (Die Cast body) Door closer hydraulically regulated designation No 1 universal type suitable for door shutters up to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified & directed.

S&F in repair Brass Mortice lock, four levers vertical type, size 100 mm size

M&L for 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone agg as in sub base complete all as specified and as directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and no pigment complete all as specified and as directed by the Engr-in-Charge.

M&L for cleaning of existing seawage pipe line 100mm /150mm/200mm internal dia at any depth including manholes by removing the manhole cover of any type/size and cleaning by means of hydraulic jet pressure machine/ manually (as directed by Engr-in-charge) as required at site from manhole and well flushing with water after cleaning including getting out sludge and disposal out of defence land , refixing the manhole in original complete all as specified and directed

M&L for cleaning the blockage of bathroom/ kitchen by cleaning the nahani traps/ gully traps of all the mud /sludge and getting out, washin thoroughly grating of trap,CI waste pipes by opening the clearing eyes and deposting the sludge in a pit of suitable size at a distance not exceeding 50 meters form the gully trap and covering the same with the soil obtained from excavation of pit including all excavatons and earthwork complete all as specified and directed by Engr-in-Charge.

M&L for cleaning of blockage of WC indian or European type by removing of all the mud/sludge and getting out depositing the sludge in a pit of suitable size at a distance n exc 50 mtr from the WC excavations and earth work complete all as specified and directed by Engr-in-Charge.

Cleaning of manholes any depth any size taking out accumulated, soil, sludge any material incl both ends and removal to MD lands and manhole cover refixing complete all as specified and directed by Engr-in-Charge.

Sucking out sewage water through sewage tanker from the man hole/septic tank/soakage well in different location and disposing off out of MD land as directed by Engr-in-Charge. Notes. For cleaning of sewage system:- (a) Contractor's representative shall attend office of Engr-in-Charge on all working days at 0900 hrs to collect the complaints pertaining to blockage of traps, cleaning of sewage lines, manholes, septic tank and soak wells . In case contractor's representative fails to report Rs 450/- per day will be deducted from the contractor payment for the absent period. (b) complaint slips shall be deposited to the JE concerned after completion of job duly singed by the users. payment shall be made on the basis of complaint slips and site verification by JE/ Engr-in-Charge. (c) Contractor shall provide printed complaint register/ slip as per format given by Engr-in-Charge before commencement of work. (d) The work in foul conditions such as cleaning of soakwell, septic tanks, manholes etc shall be carried out with mechanical means where work with mechanical means is not practicable and work shall be executed manually with the permission of Engr-in-Charge.

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre depth for foundation, manhole etc not exc 10 Sqm on plan and not exc 1.5 metre in depth including getting out in soft/loose soil complete all as specified and directed by Engr-in-charge

Returning, filling in including spreading, leveling watering and well ramming in layers not exceeding 25 centimetre in soft/loose soil complete all as specified and directed by Engr-in-charge

Removing excavated surplus soil/material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed by Engr-in-charge

Demolition and breaking up drain pipes (SGSW, AC or RCC) 150mm bore set in cement mortar complete all as specified and directed.

S&F 150 mm Salt glazed stoneware drain pipes, grade ‘A’ complete all as specified and diirected

M&L for in PCC (1:3:6) type C-2 (using 20 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.

Use and waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) of fair finished surfaces complete all as specified and as directed.

M&L for RCC (1:2:4) (using 20 mm graded stone aggregate) as in slabs supported on wall, beam and columns in floors ,roof slabs, shelves and cover slab Including demolition of existing old RCC complete all as specified and as directed.

S & F mild steel TMT bar 8 mm dia , cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for 65 mm thick vibromatic reinforced precast cement concrete 1:1.5:3 (using 20mm graded stone aggregate) with 2mm thick mild steel CR sheet around painted with 2 coats of bituminous paint , as in man hole cover slabs finish fair even and smooth without using extra cement ( Top surface will be chequred finish) including necessary form work, 100 mm long handle of 12mm dia round bar counter sunk by 25mm welded to reinforcement complete including demolition of old cover all as specified and directed by Engr-in-charge (Note : CA No and date will be engraved on covers. Reinforcement shall be measured and paid saperately. Curing will carried out with ponding method)

Cutting into existing manholes for connecting new drains 150mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete al as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5cu m, getting out, removing surplus soil to a distance n exc 50m and making good surface in hard/dense soil complete all as specified and as directed by the Engr-in-Charge.

S&F mild steel work as in post and strut in fencing including cutting tops to shape as directed drilling holes, notching for wire etc. and flat iron fillets, 10 mm dia round bar, nut & bolts for securing wire mesh including all necessary drilling and bolting including embeding in concrete and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

Supply only Chain link MS galvanised fencing any size or type weight exc 4 Kg per square metre as approved by Engineer-in-Charge.

Fixing only Chain link fencing including line wires, any mesh size and type to any type of standards rails straining bolts etc including provision of binding wireany size or type weight exc 4 Kg per square metre as approved by Engineer-in-Charge.

S&F in repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 complete. all as specified and directed.

M&L for Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:3 complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, lamp holders, regulators, sockets, light fitting any type etc complete. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed by Eng.-in-charge

M&L for Point wiring with 1100 Volts, grade 1.5 Sqmm. (nominal area) ,PVC insulated but unsheathed multistranded copper conductor single core FRLS cable drawn through and including non metallic medium duty rigid PVC concealed conduit (medium duty) 20mm dia or higher size complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including pressed iron/steel suction box of thickness1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly complete all as specified and directed by Engr.-in-charge of following.

(a) One light /Exhaust fan point controlled by one-one way switch.

(b) One ceiling fan Point controlled by one-one way switch through Regulator.

(b) One bell Point controlled by one-one way bell push switch.

(c) One three pin 5 Amp socket on same board with other switches.

(d) One three pin 5 Amp socket on independent board.

All as per Item No 186 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 2.5 Sqmm FRLS copper conductor for continuous earthing complete all as specified and directed by Eng.-in-charge.

M&L for Point wiring with1100 Volts, grade 1.5 Sqmm. (nominal area) ,PVC insulated but unsheathed multistranded copper conductor single core FRLS cable drawn through steel/PVC conduit and terminated in existing pressed steel terminal switch boxes with new 3mm thick plastic laminated sheet as top cover and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly and making good disturbed surfaces etc complete all as specified and directed by Engr.-in-charge of following. Note :(i) The wiring to be done as per IE rule and maintain colour code accordingly. Make of FLRS Copper cable of size 1.5/2.5 sqmm : Havells/Finolex/L&T /Polycab Havells/Finolex/L&T /Polycab

One light point/exhaust fan controlled by one-one way switch.

One ceiling fan point controlled by one-one way switch through Regulator.

One three pin 5 Amp socket on same board with other switches.

One three pin 5 Amp socket on independent board.

One bell point controlled by bell push switch.

All as per item No. 188.00 here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 sqmm PVC insulated FRLS copper conductor and 2.5 sqmm FRLS copper conductor for continuous earthing complete all as specified and directed.

M&L for Point wiring with 1100 Volts, grade 1.5 Sqmm. (nominal area) ,PVC insulated but unsheathed multistranded copper conductor single core FRLS cable drawn through and including non metallic medium duty rigid PVC concealed conduit (medium duty) 20mm dia or higher size complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc and 1.5 sqmm. (nominal area) single core FRLS, PVC insulated 1100 volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for conduits and sinking's for boxes and makin good to walls, floors etc as per existing one complete all as speciied and directed by Engr-in-Charge of following. Note: (i) The wiring to be done as per IE rule and maintain colour code accordingly. (ii) Modular boxes & moduler combined cover plates shall be paid separately as per site under respective items here-in-after. Make of FLRS copper cable of size 1.5/2.5 sqmm : Havells/ Finolex/L&T/polycab. Make of PVC pipe : Supreme/ Polycab/ Plaza.

One light point/ exhaust fan point, controlled by one-one way switch.

One ceiling fan point controlled by one-one way switch through Regulator.

One three pin 5 Amp socket on same board with other switches.

One three pin 5 Amp socket on independent board.

One bell point controlled by bell push switch.

All as per item No. 190.00 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 sqmm PVC insulated FRLS copper conductor and 2.5 sqmm FRLS copper conductor for continuous earthing complete all as specified and directed.

S & Fix Switch piano flush type single pole one way 230 Volts 6 Amp complete all as directed. Make : Havells/HPL/Anchor Penta

S & Fix Socket outlet 3 pin , 230 Volts 5/6 Amps flush type multipurpose 5 pin complete. Make : Havells/HPL/Anchor Penta

S & Fix bell push flush type 5 Amps 230 Volts single pole complete. Make : Havells/HPL/Anchor Penta

Supply and fix Socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type IS: 1239-1988 marked with valid CML No complete all as specified.Make : Havells/HPL/Anchor Penta

Supply and fix Switch piano, flush type, single pole, one way, 230 Volts 15/16 Amps IS: 3854 marked with valid CML No. complete all as specified. Make Make : Havells/HPL/Anchor Penta

S & Fix calling bell ding dong type AC 230 Volt single pole Make : Havells/L&T Raaga/Anchor

S & Fix step type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts, 6 Amps 120 watts .Make HPL/Havells/Anchor

Supply and fix Ceiling rose, three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified Make HPL/Havells/Anchor

S & Fix Lamp holder polycarbonate insulated body, with back plate suitable for batton fitting. Make HPL/Havells/Anchor

S&F moduler switch piano flush, button type 6 Amp SP one module one way complete all as specified Make : Legrand model Arteor, Cat No 573400 eqvt in L&T model entice/ Havells model Murano.

S&F moduler switch piano flush button type 16/ 20 Amps SP one module one way complete all as specified Make : Legrand model Arteor Cat No 573410 eqvt in L&T model entice/ Havells model Murano.

S&F moduler socket outlet multipurpose 2/3 Pin 6 Amp two module complete all as specified & directed. Make : Legrand model Arteor eqvt in L&T model entice/ Havells model Murano.

S&F moduler socket outlet two in one three pin 6 Amp and 16 Amp two module flush type complete al as specified.Make : Legrand model Arteor Cat No 573471 eqvt in L&T model entice/ Havells model Murano.

S&F moduler bell push 6 Amp one module one way complete all as specified. : Make : Legrand model Arteor Cat No 573413 eqvt in L&T model entice/ Havells model Murano.

S&F 4 step modular electronic fan regulator ,120 watt ,flush type 2 module.Make : Legrand model Arteor Cat No 573469 eqvt in L&T model entice/ Havells model Murano.

S&F in replacement of rusted GI sunken box with flush metal GI box 1/2 module suitable for modular switches incl plastering, making good disturbed surfaces of wall, painting as per existing to match the wall complete all as directed.

All as per item no 207 above but 3 module.

All as per item no 207 above but 4 module.

All as per item no 207 above but 6 module.

All as per item no 207 above but 8 module.

S&F combind cover plate white 1 module suitable for modular switches. Make : Legrand model Arteor Cat No 575700 eqvt in L&T model entice/ Havells model Murano.

S&F combind cover plate white 2 module suitable for modular switches. Make : Legrand model Arteor Cat No 575710 eqvt in L&T model entice/ Havells model Murano.

S&F combind cover plate white 3 module suitable for modular switch/socket. Make : Legrand model Arteor Cat No 575720 eqvt in L&T model entice/ Havells model Murano.

S&F combind cover plate white 4 module suitable for modular switch/socket. Make : Legrand model Arteor Cat No 575730 eqvt in L&T model entice/ Havells model Murano.

S&F combind cover plate white 6 module suitable for modular switch/socket. Make : Legrand model Arteor Cat No 575740 eqvt in L&T model entice/ Havells model Murano.

S&F combind cover plate white 8 module suitable for modular switch/socket. Make : Legrand model Arteor Cat No 575750 eqvt in L&T model entice/ Havells model Murano.

Refixing of LED tube light fittings /LED Bulk head fittings / LED fency fittings of any make or capacity taking dwon under item No 186 carefully complete all as specified and directed by Engineer-in-charge

S&F in replacement of energy saving ,surface mounted, LED 10 watt Bulk head luminaire with decorative oval diffuser comprising of high brightness LEDs complete all as specified and directed by Engr-in-charge. Make : CG cat LBHP-10-CDL/Philips WT140W LED7S CW PSU S1 PC/Havells ENDURA RUGBYNEO N /Mepro cat no BCL 23 Plain

S&F in replacement of Surface mounted general purpose square shaped luminare with low height CRCA housing and high transmitivity diffuser suitable for office application,LED 32 watt,6500K in White & gray housing with profiled & flat diffuser all as specified and directed by Engineer-in-charge Make : Philips cat no SM365C LED32-6500PSUODGR/WH OR Equivalent in wipro/Havells

S&F in replacement of fully diffused recessed mounted 2'x2' LED luminaire with UGR<19, for Full Glow Office Complaint indoor spaces, LED 36 Watt ,6500K in White & gray housing with profiled & flat diffuser all as specified and directed by Engineer-in-charge. Make : Philips cat no RC 380B LED36S-6500G4L60W60PSUODOC OR Equivalent in wipro/Havells

Supply and fixing in replacement of Busbar chamber of size 600x315x214 mm or higher size with PVC hinged lid suitable for and mounting arrangement for fixing of MCCB 4 pole, 100/125 Amps 25 KA (Icu=100%Ics) 415 Volt,50 Hz, duly connected with and incl 04 Nos of copper Busbar 300 Amps fixed on epoxy insulators, Gun metal cable gland of 25 Sqmm 01 No and PVC coupler for sub main wires 04 Nos complete Polycarbonate type (shock proof, rust free, corrosion free, acid and chemical resistant, fire retardant, having high impact, made of halogen and silica free recyclable material), UV resistant, having high grade gasket made of Polyurethane, flame retardant,complete all as directed at site by Engr in charge or his rep complete. Note:- Only MCCB shall be measured and paid for seperately all other items incl connection from MCCB to busbar with suitable size copper wire incl thimble, bottle lugs etc are incl in item rate. Make:- Hensel cat No Mi 9410 or ABB/BCH/Universal/Schneider

Supply and fixing in replacement for Distribution board Vertical type TPN 4 Way double door, suitable for MCCB 100 to160 Amps MCCB as incoming and MCBs for outgoing factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection incl taking out old u/s complete. Note:- DB and MCCB/MCB shall be of same make and paid separetaly Make:- Legrand/Hager/L&T /C&S

Supply and fixing in replacement for Distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection.Note:- DB and MCCB/MCB shall be of same make Make:- Legrand/Hager/L&T

Supply and fixing in replacement for Distribution board SPN 4 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection.Note:- DB and MCCB/MCB shall be of same make Make:- Legrand/Hager/L&T

Supply and fixing in replacement for Distribution Box MCB Protected Socket with sheet steel enclosure 20 A MCB DBOXX Combo DP including PLUG TOP all as specified & directed Make : Havells/LEGRAND/L&T

Supply and fix in repairs MCCB 100 Amps FP 415 Volts having breaking capacity 16 KA with and incl spreader link kit complete suitable for fixing as incoming in polycarbonate busbar complete all as specified and directed. Make : Legrand/L&T/C&S/

S&Fix in repairs MCB single pole 240 volt, 10 KA, 5-32 Amp, 'C' series confirming to IS complete all as specified and directed. Make: Legrand / L&T/ Hager/C&S

S&Fix in repairs MCB SPN 240 Volt 10 KA 32 Amp 'C' series conforming to IS complete all as specified & directed. Make: Legrand / L&T/ C&S/ Hager

S&Fix in repairs MCB SP 240 Volt 10 KA 40 Amp 'C' series conforming to IS complete all as specified & directed. Make: Legrand / L&T/ Hager/C&S

S&Fix in repairs MCB 415 Volt, TPN, 10 KA 40- 63 Amp 'C' series conforming to IS complete all as specified & directed. Make: Legrand / L&T/ Hager/C&S

M&L for sub main wiring with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 4 Sqmm (nominal area) drawing in and including 20 mm dia or higher medium duty PVC concealed conduit/flexible conduit where reqd and conduit accessories and fittings. Including one single core green colour PVC Insulated unsheathed cable copper conductor multistranded of size 4 Sq mm as earth wire upto common earth and connected to earth dolly complete incl taking out old unserviceable submain all as specified & directed.Make: Havells/Finolex/L&T/Polycab

M&L for sub main wiring with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 4 Sqmm (nominal area) drawing into existing conduit including one single core green colour PVC Insulated unsheathed cable copper conductor multistranded of size 4 Sq mm as earth wire upto common earth and connected to earth dolly complete incl taking out old unserviceable submain all as specified & directed.Make: Havells/Finolex/L&T /Polycab

M&L for sub main wiring with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 6 Sqmm (nominal area) drawing in and including 25 mm dia or higher medium duty PVC concealed conduit/flexible conduit where reqd and conduit accessories and fittings. Including one single core green colour PVC Insulated unsheathed cable copper conductor multistranded of size 6 Sq mm as earth wire upto common earth and connected to earth dolly complete incl taking out old unserviceable submain all as specified & directed.Make: Havells/Finolex/L&T/Polycab

M&L for sub main wiring with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 6 Sqmm (nominal area) drawing into existing conduit including one single core green colour PVC Insulated unsheathed cable copper conductor multistranded of size 6 Sq mm as earth wire upto common earth and connected to earth dolly complete incl taking out old unserviceable submain all as specified & directed.Make: Havells/Finolex/L&T /Polycab

M&L for sub main wiring with 5 Single core(R,Y,B Phase, neutral and earth wire) PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 6 Sqmm (nominal area) drawing in including 25mm or higher medium duty PVC concealed conduit/flexible conduit where reqd & all conduit accessories and fitting inclu one single core green colour PVC Insulated unsheathed cable copper conductor multistranded of size 6 Sq mm as earth wire upto common earth and connected to earth dolly complete incl taking out old unserviceable submain all as specified & directed.Note : 5 RUN Cable will be drawn in one conduit , measured per RM only. Make: Havells/Finolex/L&T /Polycab

Material and labour for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized wire 4 mm earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanized iron pipe 15 mm bore (light grade) including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm dia MS bar funnel wire mesh 20 mm bore galvanized iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 5 of SSR part 1 including testing on completion all as specified and directed. incl demolition to existing one complete. Note: (i) Earthing has to done by spl persons and if the desired earth resistance is not found within permissible limit shall be redone by contractor at no extra cost. (ii) Cost of GI wire 4 sqmm and 15 mm dia pipe medium grade upto 7.5 mtr is included in the rate quoted for this item.

Supply & Laying XLPE insulated armoured heavy duty electric cable , with multi stranded aluminium conductor served with an inner sheathing of PVC type armoured with galvanized steel wire or tape and PVC sheathed 1100 volt grade,nominal cross sectional area 16 Sqmm 4core inclu lugs and heat shrinkable PVC Sleeves on exposed surfaces & teflon tape duly insulated complete laid in trenches, ducts, drawn through pipe across the road/path/alongpoles/wall/floors/equipment etc including jointing and testing complete all as specified and directed by the Engr-in-charge. Make: Havells/Polycab/Glandlay

Supply & Laying XLPE insulated armoured heavy duty electric cable , with multi stranded aluminium conductor served with an inner sheathing of PVC type armoured with galvanized steel wire or tape and PVC sheathed 1100 volt grade,nominal cross sectional area 10 Sqmm 2 core inclu lugs and heat shrinkable PVC Sleeves on exposed surfaces & teflon tape duly insulated complete laid in trenches, ducts, drawn through pipe across the road/path/alongpoles/wall/floors/equipment etc including jointing and testing complete all as specified and directed by the Engr-in-charge. Make: Havells/Polycab/Glandlay

Excavation in trenches not exceeding 1.5m and not exceeding 1.5 m in depth for laying of electric cableand getting out in soft/loose soil, complete all as specified and directed by Engr -in-charge

Returning, filling in excavated soil , including leveling,watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engr -in-charge

Removing excavated material(soil) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above & starting point complete all as specified and directed by Engr-in-charge.

M&L for sand cushioning in trenches for protection of UG cable with river based sand laid dry in trenches before and after laying of cable, incl well ramming complete all as specified and directed

M&L for providing of new sub class 'B' bricks, old size, well burnt laid flat dry for protection of under ground cable complete all as specified & directed.

Supply & Laying in replacement of GI Steel tubing light grade 40 mm(2") dia including all fitting laying in trenches across road or grouting /fixing on wall for protection of cable complete all as specified and directed by Engr-in-charge.

Supply & Fixing building security light fitting LED type 45 Watt of dia-cast IP 66 aluminium housing, 45 Watt, LED 6000K lence type toughened glass having seprate surge protector 10 KV , efficiecy of minimum 100 lumens /watt, incu adobter if any , prewired complete incuding 40/32 dia GI Light grade for bracket of fitting as reqd up to 1.2 RM proper shaped , bended (120 degree) threaded & drilling holes for wire entry & MS clamps made out of flat iron of suitable size incl painting all as specified & directed Make : Crompton cat no LSTP-45-CDL or equivalent in Wipro/Havells

M/s Anil Kumar

M/S C S AITHANI