Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹24.9 Cr
EMD Value
₹24.9 L
Closing Date
20 Oct 2022, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
NBCC Bhawan
NBCC Bhawan
Development of Grand Canal - 3km Stretch (Rehabilitation and beautification, pedestrian pathways, iconic cycle tracks and street furniture, F&B etc) from Subbiah Salai to Conference point (Uppar) at Puducherry
NBCC/SBGSouth/SmartCity/Pudchry/Works/2022/21~EW3721bf7c979423e54c0d3b98
NBCC/SBGSouth/SmartCity/Pudchry/Works/2022/21
Open Tender-Domestic
Civil Works General
NBCC Bhawan
₹11,800
₹24.9 L
20 Oct 2022
6 Oct 2022
20 Oct 2022
6 Oct 2022
20 Oct 2022
ABSTRACT OF COST
Sl.No. Description of works Estimated Cost Including
A CIVIL WORKS 166,711,789
B Electrical works 45,862,903
C Plumbing & Fountain works 36,878,815
Grand Total 249,453,506
Grand Total 249,453,506
( Rupees Twenty Four Crore Ninety Four Lakh Fifty Three Thousand Five Hundred and Six only)
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.06 18:13:28
NBCC INDIA LIMITED
Development of Grand Canal - 3km Stretch (Rehabilitation and beautification, pedestrian pathways, iconic cycle tracks and street furniture, F&B etc) from
Subbiah Salai to Conference point (Uppar) at Puducherry
BILL OF QUANTITY
Sl.No Code No Description of Work Unit Quantity Rate Amount
(A)- CIVIL WORKS
Earthwork in excavation by mechanical means (Hydraulic excavator) / manual
means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm
1 Code No.2.8.1 on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, Cum 3,715.00 161.59 600306.85
including getting out the excavated soil and disposal of surplus excavated soil
as directed , within a lead of 50m - all kinds of soil.
Filling available excavated earth (excluding rock) in trenches, plinth, sides of
2 Code No.2.25 foundations etc. in layers not exceeding 20cm in depth, consolidating each Cum 2,577.00 143.27 369206.79
deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m.
Supplying and filling with gravel (excluding rock) in trenches , plinth, sides of
Code foundations etc . In layers not exceeding 20 cm in depth consolidating each
No.2.27A.1 deposited layers by ramming and watering etc .complete including all lead and
Providing and laying in position cement concrete of specified grade excluding
4 Code No.4.1.3 the cost of centering and shuttering - all work upto plith level - 1:2:4 (1 cement : Cum 5,203.00 6,279.46 32672030.38
2 coarse sand : 4 graded stone aggregate 20mm nominal size)
Providing and laying in position cement concrete of specified grade excluding
the cost of centering and shuttering - all work upto plith level - 1:4:8 (1 cement :
5 Code No.4.1.8 4 coarse sand : 8 graded stone aggregate 40mm nominal size). Cum 5,111.00 4,907.68 25083152.48
Providing and laying cement concrete in retaining walls, return walls, walls (any
thickness) including attached pilasters, columns, piers, abutments, pillars, posts,
struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor
blocks, plain window sills, fillets, sunken floor etc. upto floor five level, excluding
the cost of centering ,shuttering and finishing - 1:1.5:3 (1 cement : 1.5 coarse
sand : 3 graded stone aggregate 20mm nominal size)
Centring and shuttering including strutting, propping etc. and removal of form
7 Code No.4.3.2 work for - retaining walls, return walls, walls (any thickness) including attached Sqm 12,450.00 553.62 6892569.00
pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.
Centring and shuttering including strutting, propping etc.and removal of form
for: Foundations, footings, bases of columns, etc. for mass concrete.
Centering and shuttering including strutting, propping etc and removal of form
for - Suspended floors, roofs, landings , balconies and access platform
Centring and shuttering including strutting, propping etc. and removal of form
for: lintels, beams, plinth beams, girders, bressumers and cantilevers.
Centring and shuttering including strutting, propping etc. and removal of form
for: columns, pillars, piers, abutments, posts and struts
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.06 18:13:28
Sl.No Code No Description of Work Unit Quantity Rate Amount
Steel reinforcement for R.C.C.work including straightening, cutting , bending,
Code No. placing in position and binding all complete upto plinth level - Thermo-
12 Mechanically treated bars Fe - 415 or more Kg 3,845.00 94.13 361929.85
13 Providing and placing M30 grade cover block for RCC work all levels Nos 95.00 2.76 262.20
Providing and laying in position machine batched and machine mixed design
mix M-25 grade cement concrete for reinforced cement concrete work , using
cement content as per approved design mix , including pumping of concrete to
site of laying but excluding the cost of centering , shuttering , finishing and
14 reinforcement , including admixtures in recommended proportions as per IS : Cum 21.00 7,515.60 157827.60
9103 to accelerate, retard setting of concrete , improve workability without
impairing strength and durability . Note:- Cement content considered in this item
is @ 330 kg / cum. Excess or less cement used as per design mix is payable or
recoverable separately. - All work upto plinth level
Providing and laying in position machine batched and machine mixed design
mix M-25 grade cement concrete for reinforced cement concrete work , using
cement content as per approved design mix , including pumping of concrete to
site of laying but excluding the cost of centering, shuttering , finishing and
15 reinforcement , including admixtures in recommended proportions as per IS : Cum 11.00 8,426.45 92690.95
9103 to accelerate, retard setting of concrete , improve workability without
impairing strength and durability . Note:- Cement content considered in this item
is @ 330 kg / cum. Excess or less cement used as per design mix is payable or
recoverable separately. - All work above plinth level upto floor V level
Extra for providing richer mixes at all floor levels - Note:- Excess / less cement
Code No. over the specified cement content used is payable / recoverable separately -
5.34.3 Providing M-40 grade concrete instead of M-25 grade BMC / RMC . (Note:-
cement content considered in M-40 is @ 360 kg / cum)
Brick work with common burnt clay F.P.S.(non modular ) bricks of class
17 designation 3.5 in foundation and plinth in - cement mortar 1:4 (1 cement : 4 cum 1,831.00 7,679.46 14061091.26
Brick work with common burnt clay F.P.S (non modular ) bricks of class
18 Code No.6.4.2 designation 3.5 in superstructure above plinth level upto floor five level in all cum 71.00 8,390.39 595717.69
shapes and sizes in - cement mortar 1:6 ( 1 cement : 6 coarse sand)
Brick work in gauged arches in superstruture above plinth level and upto floor
five level in cement mortar 1:3 (1 cement : 3 coarse sand) including centering
and shuttering complete , for span upto 6 metre with common burnt clay
F.P.S.(non modular) bricks of class designation 3.5
Half brick masonry with FPS bricks of class designation 35 in superstructure
20 above plinth level upto floor V level in cement mortar 1:4 (1 cement: 4 coarse Sqm 1,060.00 1,015.46 1076387.60
Extra for providing and placing in position 2 nos. 6mm dia MS bars at every third
course of half brick masonry (with FPS bricks).
Providing and fixing stone slab with table rubbed , edges rounded and polished,
of size 75x50 cm deep and 1.8cm thick, fixed in urinal partitions by cutting a
chase of appropriate width with chase cutter and embedding the stone in the
22 chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand sqm 1.00 2,007.70 2007.70
: 4 graded stone aggregate 6mm nominal size) and finished smooth - White
agaria mable stone
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.06 18:13:28
Sl.No Code No Description of Work Unit Quantity Rate Amount
Providing wood work in frames of doors, windows, clerestory windows and other
frames, wrought framed and fixed in position with hold fast lugs or with dash
23 fasteners of required dia & length (hold fast lugs or dash fastener shall be paid cum 0.25 157,991.50 39497.88
for separately) -Vengai wood
Providing and fixing panelled or panelled and glazed shutters for doors,
windows, and clerestory windows, including ISI marked M.S.pressed butt hinges
bright finished of required size with necessary screws, excluding panelling
24 which will be paid for separately , all complete - Vengai wood - 30 mm thick sqm 7.00 4,638.36 32468.52
Providing and fixing panelling or panelling and glazing in panelled or panelled
and glazed shutters for doors, windows and clerestory windows (area of
25 opening for panel inserts excluding portion inside grooves or rebates to be sqm 7.00 4,232.41 29626.87
measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40
mm thick - Vengai wood
Providing and fixing specified wood frame work consisting of battens 50x25 mm
26 fixed with rawl plug and drilling necessary holes for rawl plug etc. including Cum 3.00 261,784.04 785352.12
priming coat complete - Kiln seasoned and chemically treated Padak wood
Providing 40 X 5 mm flat iron hold fast 40 cm long including fixing to frame with
10 mm diameter bots, nuts and wooden plugs and embeddings in cement
concrete block 30 x10 x 15 cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded
stone aggregate 20mm nominal size)
Code Providing and fixing ISI marked IS : 1341 M.S. heavy weight butt hinges with
No.9.56.1 necessary screws etc.complete - 125 X 90 X 4.00 mm
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic
coating not less than grade AC 10 as per IS : 1868), transparent or dyed to
Code required colour or shade, with nuts and screws etc. complete : 300x16 mm
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating
30 not less than grade AC 10 as per IS:1868) transparent or dyed to required No 6.00 73.67 442.02
colour or shade with necessary screws etc. complete : - 100x10mm
Providing and fixing aluminium handles ISI marked anodised (anodic coating
31 not less than grade AC 10 as per IS:1868) transparent or dyed to required No 6.00 72.13 432.78
colour or shade with necessary screws etc. complete :-125mm
Providing and fixing factory made uPVC door frame made of uPVC extruded
sections having an overall dimension as below (tolerance +_1mm ), with wall
thickness 2.0 mm (+-0.2mm), corners of the door frame to be jointed with
Code galvanized brackets and stainless steel screws , joints mitred and plastic
No.9.117.2 welded. The hinge side vertical of the frames reinforced by galvanized M.S.tube
of size 19 x 19 mm and 1mm (+-0.1mm) wall thickness and 3 nos. stainless steel
hinges fixed to the frame complete as per manufacturer's specification -
Extruded section profile size 42 x 50 mm
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.06 18:13:28
Sl.No Code No Description of Work Unit Quantity Rate Amount
Providing and fixing to existing door frames - 30 mm thick factory made Polyvinyl
Chloride (PVC) door shutters made of styles and rails of a uPVC hollow section
of size 60 x 30 mm and wall thickness 2 mm (+- 0.2 mm) with inbuilt decorative
moulding edging on one side . The styles and rails mitred and joint at the
corners by means of M.S. galvanised / plastic brackets of size 75 x 220 mm
having wall thickness 1.0 mm and stainless steel screws . The styles of the
shutter reinforced by inserting galvanised M.S.tube of size 25x20 mm and 1mm
33 (+- 0.1mm) wall thickness . The lock rail made up of 'H' section , a uPVC hollow Sqm 7.00 2,978.32 20848.24
section of size 100 x 30 mm and 2 mm (+-0.2 mm) wall thickness , fixed to the
shutter styles by means of plastic / galvanised M.S. 'U' cleats. The shutter frame
filled with a uPVC multichambered single panel of size not less than 620 mm,
having overall thickness of 20 mm and 1 mm (+_ 0.1mm) wall thickness . They
panels filled vertcally and tie bar at two places by inserting horizontally 6 mm
galvanised M.S.rod and fastened with nuts and washers , complete as per
manufacturer's specification
Providing and fixing of 65mm Navtal lock of 7 levers with 3 keys etc complete
Steel work in built up tubular (round, square or rectangular hollow tubes etc.)
Code trusses etc., including cutting, hoisting, fixing in position and applying a priming
No.10.16.1 coat of approved steel primer, including welding and bolted with special shaped
washers etc. complete. Hot finished welded type tubes .
Steel work welded in built up sections / framed work , including cutting,hoisting,
Code fixing in position and applying a priming coat of approved steel primer using
No.10.25.2 structural steel etc. as required - in gratings, frames, guard bar, ladder, railings,
brackets,gates and similar works
Providing and fixing hand rail of approved size by welding etc. to steel ladder
Code railing, balcony railing, staircase railing and similar works, including applying
No.10.26.1 priming coat of approved steel primer -
52 mm thick cement concrete flooring with concrete hardener topping, under
layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size) and top layer 12 mm thick cement
38 Code No. 11.4 hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone Sqm 778.00 686.25 533902.50
aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre
per 50 kg of cement or as per manufacturer's specifications. This includes cost
of cement slurry, but excluding the cost of nosing of steps etc. complete.
Planting of trees by the roadside (Avenue trees) in 0.60 m dia holes, 1 m deep
dug in the ground, mixing the soil with decayed farmyard/ sludge manure,
planting the saplings, backfilling the trench, watering, fixing the tree guard and
maintaining the plants for one year.
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS :
15622 (thickness to be specified by the manufacturer) , of approved make in all
colours , shades of size 300 x 450 mm as approved in skirting , risers of steps
and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse
Code sand ) and jointing with grey cement slurry @ 3.3 kg per sqm, including
No.11.36B. pointing in white cement with pigment of matching shade complete - size
Providing and laying rectified ceramic rustic / matt finish floor tiles 300 x 300
mm or more ( thickness to be specified by the manufacturer ) of 1st quality
41 conforming to IS:15622 of approved make in all colours shades laid on 20mm Sqm 83.00 1,181.48 98062.84
thick cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints
with white cement and matching pigments etc., complete
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.06 18:13:28
Sl.No Code No Description of Work Unit Quantity Rate Amount
Providing and fixing PVC corner beading of required size to suit the thickness of
Code the wall tile at the corner joints of dado
No.11.62 works
Providing and laying pressed clay tiles (as per approved pattern 18mm nominal
thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement
43 : 4 coarse sand) mixed with 2% integral water proofing compound , laid over a Sqm 49.00 655.92 32140.08
bed of 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished
Lime concrete terracing on roofs of required thickness laid to fall with 25mm
Code nominal size brick aggregate and 50% lime mortar 1:2 (1 lime putty : 2 surkhi)
No.12.20L rammed and finished with gur and belgiri treatment complete including rounding
of junctions with Parapet wall complete
Making khurras 45x45 cm with average minimum thickness of 5 cm cement
concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm
45 nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm Each 2.00 288.16 576.32
cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,
rounding the edges and making and finishing the outlet complete.
Providing and fixing plain multipurpose cement board (High pressure steam
46 cured) as per IS: 14862 , with suitable screws for fibre cement board in ceiling Sqm 650.00 654.49 425418.50
etc .complete (frame work to be paid separately) - 6mm thick cement board
Providing and fixing on wall face unplasticised rigid PVC rain water pipes
conforming to IS: 13592 Type A, including jointing with seal ring conforming to
Code IS : 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes - Metre
No.12.41.2 110 mm diameter.
Providing and fixing on wall face unplasticised - PVC moulded fittings
Code No. /accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592
12.42.4.2 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm
gap for thermal expansion - Single tee without door -110x110x110mm
Providing and fixing on wall face unplasticised- PVC moulded fittings
Code /accessories for unplasticised rigid PVC rain water pipes conforming to IS :
No.12.42.6.2 13592 type A including jointing with seal ring conforming to IS : 5382 leaving
10mm gap for thermal expansion. Shoe (plain)110mm shoe.
Providing and fixing unplasticised - PVC pipe clips of approved design to
unplasticised- PVC rain water pipes by means of 50x50x50mm hard wood plugs
50 screwed with M.S. screws of required length, including cutting brickwork and Each 26.00 298.19 7752.94
fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand) and making good the
wall etc., complete - 110mm
Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
51 thickness and of approved size and as per approved pattern on steel frame work Sqm 722.00 370.46 267472.12
complete (steel frame work to be paid separately).
Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20mm
52 thickness and of approved pattern on steel frame work complete (steel frame Rmt 72.00 137.25 9882.00
work to be paid separately
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.06 18:13:28
Sl.No Code No Description of Work Unit Quantity Rate Amount
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50
mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS:
277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet
Code and polyester top coat 15-18 microns using self drilling/ self tapping screws
No.12.51.6 complete : Gutter (600 mm over all girth)
54 20mm cement plaster of mix 1:4 (1 cement : 4 coarse sand) Sqm 16,650.00 321.03 5345149.50
Code 12mm cement plaster finished with a floating coat of neat cement of mix - 1:3 (1
No.13.8.3 12 mm cement plaster of mix 1:5 (1 cement : 5 fine sand)
Code 15 mm cement plaster on the rough side of single or half brick wall of mix 1:5
No.13.9.2A (1 cement : 5 fine sand)
58 6mm cement plaster of mix 1:3 (1 cement : 3 Fine sand) Sqm 48.00 180.67 8672.16
Finishing with deluxe multi surface paint system for interiors and exteriors using
Code primer as per manufacture's specification -Two or more coats applied on walls
No.13.48.1 @ 1.25 ltr / 10 sqm over and including one coat of special primer applied @
0.75 ltr / 10 sqm
Painting with synthetic enamel paint of approved brand and manufacture to give
Code an even shade - Two or more coats on new work.
Demolishing cement concrete manually / by mechanical means including
Code disposal of material within 50 metres lead - nominal concrete 1:3:6 or richer mix
No.15.2.1 (i/c equivalent design mix)
Demolishing R.C.C work manually / by mechanical means including stacking of
62 Code No 15.3 steel bars and disposal of unserviceable material within 50 metres lead Cum 2,476.00 2,011.92 4981513.92
Demolishing brick work manually / by mechanical means including stacking of
Code serviceable material and disposal of unserviceable material within 50 metres
No.15.7.4 lead - in cement mortar.
Dismantling stone slab flooring laid in cement mortar including stacking of
64 serviceable material and disposal of unserviceable material within 50 metres Sqm 2,075.00 148.01 307120.75
Code No Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking
15.28.1 the material within 50 metres lead of - G.S.sheet
Dismantling manually / by mechanical means including stacking of serviceable
66 material and disposal of unserviceable material within 50 metres lead - Sqm 276.00 235.96 65124.96
bituminous road.
Dismantling old plaster or skirting raking out joints and cleaning the surface for
67 plaster including disposal of rubbish to the dumping ground within 50 metres Sqm 7,316.00 29.95 219114.20
Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps,
Code 32mm C.P.brass waste of standard pattern, including painting of fittings and
No.17.7.3 brackets, cutting and making good the walls wherever required - white Vitreous
China wash basin size 550x400 mm with a pair of 15 mm C.P.brass pillar taps
Providing and fixing white vitreous china water closet squatting pan (Indian type)
Code No. : Orissa pattern W.C. pan of size 580x440 mm
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.06 18:13:28
Sl.No Code No Description of Work Unit Quantity Rate Amount
Providing and fixing white vitreous china flat back or wall corner type lipped
Code front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.
71 waste fittings complete. Flexible pipe 32 mm dia Each 3.00 64.72 194.16
Providing and fixing mirror of superior glass (of approved quality) and of
Code required shape and size with plastic moulded frame of approved make and
72 shade with 6mm thick hard board backing - rectangular shape 453 x 357 mm Each 3.00 1,155.31 3465.93
Providing and fixing ASTM pipes including all ASTM plain & brass threaded
Code fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of
No.18.9.11 pipes & fitting with one step ASTM solvent cement and testing of joints
complete (Internal work exposed on wall) - 20mm nominal outer dia pipes
Providing and fixing ASTM pipes including all ASTM plain & brass threaded
Code fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of
No.18.9.12 pipes & fitting with one step ASTM solvent cement and testing of joints complete
(Internal work exposed on wall) - 25mm nominal outer dia pipes
Providing and fixing ASTM pipes including all ASTM plain & brass threaded
Code fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing
No.18.9.13 of pipes & fitting with one step ASTM solvent cement and testing of joints
complete (Interna work exposed on wall) - 32 mm nominal outer dia pipes
Code Providing and fixing brass stop cock of approved quality - 20mm nominal bore
Code Providing and fixing gun metal gate valve with CI wheel of approved quality
No.18.17.1 (screwed end) - 25 mm nominal bore.
Code No: Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm
78 length 15 mm nominal bore Each 5.00 135.88 679.40
Providing and fixing C.P. brass long body bib cock of approved quality
Code conforming to IS standards and weighing not less than 690 gms. 15 mm nominal
No.18.51.1 bore
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of
Code approved quality conforming to IS:8931 15mm nominal bore
Providing and fixing PTMT grating of approved quality and colour - rectangular
81 type with openable cirucular lid - 150mm nominal size square 100mm diametre Each 2.00 176.18 352.36
of the inner hinged round grating
Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse
sand) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size ), foundtion concrete 1:4:8 mix ( 1 cement :
4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside
plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand)
Code No. finished with floating coat of neat cement and making channels in cement
19.7.1.2 concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm
nominal size) finished with a floating coat of neat cement complete as per
standard design - inside size 90x80 cm and 45 cm deep including C.I.cover
with frame (light duty ) 455 X 610 mm internal dimensions , total weight of cover
and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame
15 kg) - with sewer bricks conforming to IS :4885
Providing and fixing on wall/column face unplasticed - PVC soil and waste pipes
Code (type - B) conforming to IS : 13592- 1992 including jointing with seal ring
No.19.33.1 conformation to IS : 5382 leaving 10mm gap for thermal expansion - single
socked pipes -110mm diametre
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.06 18:13:28
Sl.No Code No Description of Work Unit Quantity Rate Amount
Providing and fixing on wall face/column face unplasticised - PVC mould fittings
Code No. /accessories for unplasticisd - PVC soil and waste pipes conforming to IS :
19.33.1B 14735 - 1999 including jointing with seal ring conforming to IS : 5382 leaving
10mm gap for thermal expansion - Single tee without door - 110 x110x110mm
Providing and fixing on wall face/column face unplasticised - PVC mould fittings
Code No. /accessories for unplasticisd - PVC soil and waste pipes conforming to IS :
19.33.1C 14735 - 1999 including jointing with seal ring conforming to IS : 5382 leaving
10mm gap for thermal expansion - bend 110 mm
Providing and fixing on wall face/column face unplasticised - PVC mould fittings/
Code accessories for unplasticisd - PVC soil and waste pipes conforming to IS :
No.19.33.1D 14735 - 1999 including jointing with seal ring conforming to IS : 5382 leaving
10mm gap for thermal expansion - bend with door 110 mm
Providing and fixing on wall / column face unplasticised - PVC soil and waste
pipes (type B) conforming to IS :13592 - 1992 including jointing with seal ring
Code conforming to IS : 5382 leaving 10mm gap for thermal expansion - Single
No.19.33.2 socketed pipes 75mm diameter
Providing and fixing on wall / column face unplasticisd - PVC moulded fittings /
Code accessories for unplasticisd - PVC soil and waste pipes conforming to IS :14735
No.19.33.2A -1999 including jointing with seal ring conforming to IS : 5382 leaving 10mm gap
for thermal expansion - Single tee with door - 75x75x75mm
Providing and fixing on wall/column face unplasticisd - PVC moulded fittings/
accessories for unplasticisd - PVC soil and waste pipes conforming to IS :14735
Code -1999 including jointing with seal ring conforming to IS : 5382 leaving 10mm gap
No.19.33.2B for thermal expansion - Single tee without door - 75x75x75mm
Providing and fixing on wall / column face unplasticisd - PVC moulded fittings/
accessories for unplasticisd - PVC soil and waste pipes conforming to IS :14735
Code -1999 including jointing with seal ring conforming to IS : 5382 leaving 10mm gap
No.19.33.2C for thermal expansion - Bend 75 mm
Supply of Quarry rubbish including stacking to department gauge for
premeasurement and spreading required thickness.
Providing, laying and jointing UPVC pipes (0.6 Mpa) conforming to IS
specification 4985 and ISI marked including transportation to the site , lowering
Code to the trenches, laying to proper grade and alignment, testing of joints with
No.31.161.1E required testing equipment, including cost of solvent cement, excluding UPVC
specials such as bends, tees, threaded pieces, couplers, reducer, endcaps etc.,
complete all as per IS and CPWD specification. - 90mm dia.
Providing and fixing in position UPVC moulded elbow (1 Mpa) conforming to IS
93 7834 part II and ISI marked, including labour charges for jointing, jointing No 6.00 339.66 2037.96
materials etc,complete -110mm dia
Providing and fixing in position UPVC moulded saddle set (0.6 Mpa) conforming
94 to IS 7834 part II and ISI marked, including labour charges for jointing, jointing No 20.00 142.58 2851.60
materials etc,complete - 90 x 20mm dia
Disposal of building rubbish and unserviceable dismantled materials upto 5km
95 NPSR radius. The rate include incidental charges transportation by mechanical means Cum 9,978.00 137.21 1369081.38
loading and unloading etc., complete as directed by the Engineer-in-charge.
Collection and supply of red earth for spreading on the platform and stacking to
the departmental gauge for pre measurment.
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.06 18:13:28
Sl.No Code No Description of Work Unit Quantity Rate Amount
Providing and fixing of grey granite benches having two supporting stone of size
0.285x0.285x0.41m and a top slab of size 1.40 x 0.45 x 0.10m the rate to
includes the cost of granite stone, dressing, loading and unloading, incidential
charges for 3 line dressing on all exposed surfaces of the pillars and stone
slabs, single nosing the top edges of the slab, as per design pattern. The rate
includes earthwork, fixing in 10cm thick PCC - 1:4:8 labour for shifting, fixing in
position relaying after altering the existing granite stoneetc., complete all as per
the architectural drawing and as directed by the Engineer-in-charge
Providing and planting of Korean grass (Zig Zag planting method) including
excavation if required and leveling the area, developin thick lawn free from
weeds, watering, fit for moving, transport charges inclusive of all manure cost
and maintaining for three months.
Providing and fixing of MS Litter bin of size dia 40 cm and 61 cm height made up
of perforated sheet of 1.6 mm thickness With 12 mm dia holes, fixed with dia 32
99 NPSR mm GIpipe of 1.8 mts height. The Litter Bin to be finished with sand blasting and Nos 120.00 9,000.00 1080000.00
two coats of MRF Epoxy paint. The rates includes cost of Litter Bin,
Conveyance, painting & installation etc, work complete
Providing and laying 45 x 45 cm grey granite slab of thickness 3cm in the
100 NPSR pavements top surface flame finished with neat edges, 1 cm wide recessed Sqm 5,530.00 1,912.00 10573360.00
cement pointing laid over 2 cm thick cement mortar
Providing and fixing grey granite kerb wall at road edges of sizes 170mm at top,
200mm at bottom, 400mm height at length not less than 900mm each and
having one side slope / tapper at front face with rounded curvature edges at top
by dressing as per drawing and as per direction of Engineer-in-charge. The
exposed stone surface finished should be in flamed finished and the sample
should be free from Smear of mortar etc.
Providing and fixing 15mm thick country wood eaves board as per architectural
Providing and fixing PVC 110mm dia terminal guard - Vent Cowl etc., complete
103 NPSR as directed by the Engineer-in-charge. No 2.00 38.09 76.18
Supplying and fixing vitreous enamel Street Name sign board with coach screws
on walls 380mm x 760mm corner rounded white lettered on blue background
enamel sign board made of 2mm thk. MS plate with washer at the rear side at
104 NPSR different locations in the Boulevard at requisite height from existing pavement No 40.00 9,500.00 380000.00
level. The rate shall include art work (stencil work) to be provided to actual size.
The cost includes all material and labour charges etc., complete as directed by
the Engineer-in-charge.
Supplying and erecting Directional sign boards in the Boulevard at various
locations as per scheme provided and as directed by the Engineer-in-charge
consisting of the following components; Foundation block: 600mm square
1200mm high with top at 150mm above ground level, resting on 150mm thk. 900
mm square PCC bed concrete (1:4:8) encasing the MS pipe with required
diameter - all cast in situ including form work.
The Mast - 150mm (NB) M.S. Pipe 4.8mm thk. 2.50 meter height welded to
300x300x6mm thk., MS base plate, welded sleeve at required distance including
grinding for neat finish.Cast iron sleeve: 165mm dia 3mm thk. MS proprietary
105 NPSR board welded to MS Cap (with internal threading) by means of 25mm dia MS rod No 10.00 75,000.00 750000.00
and painted and lettered on both sides as per design and drawings.Directional
boards: Made out of MS sheet of size 820x160mmx 3mm thk. 4nos blue
enamelled white lettering welded to mast at every location including grinding of
excess weld metal for neat finish.
The rate shall include all incidentals charges and in-situ sand blasting for
immediate application of one coat of Zinc rich epoxy primer and over two coats
of approved brand and shade of epoxy paint as Directed by Engineering in
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.06 18:13:28
Sl.No Code No Description of Work Unit Quantity Rate Amount
Supplying and erecting in brass sheet 6mm thick for Street History Plaques of
1200 x 600 x 6mm with rounded top and vertical edges with raised and polished
106 NPSR 16mm high lettering fixed on the existing building wall and 90 cm above ground No 2.00 75,000.00 150000.00
level. The rate shall include all material and labour etc., complete as directed by
the Engineer-in-charge
Supplying and erecting two line dressed granite information board With Map of
size 1200 x 600 x 75mm with rounded top and vertical edges with raised and
polished 16mm high lettering fixed on 1200x 520mm overall plan size masonry
107 NPSR pedestal made out of 1:6 brick work with 1:5 cement plastering, 25mm thk., No 2.00 85,000.00 170000.00
30cm below ground level and 95/65 cm above ground level resting on 1:4:8
PCC, 15mm thk., with 2 coats of approved paint.The rate shall include all
material and labour etc., complete as directed by the Engineer-in-charge.
Supply and planting of Trees of required size including Transportation, loading
108 NPSR and unloading using machinaries or Labour, Soil with fertilizer etc.,complete
with 6 month maintanence.
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.06 18:13:28
Sl.No Code No Description of Work Unit Quantity Rate Amount
Alstonia scholaris No 28 3780 105840.00
Cordia subcordata No 17 3840 65280.00
Mimusops elengi No 25 3840 96000.00
Syzygium cumini No 6 4020 24120.00
Albizia saman No 29 3720 107880.00
Bauhinia blakeana No 30 4020 120600.00
Swietenia macrophyla No 8 3780 30240.00
Lagerstroemia floribunda No 23 3720 85560.00
Terminalia catappa No 12 3840 46080.00
Peltophorum pterocarpum No 2 3600 7200.00
Barringtonia asiatica No 33 3660 120780.00
Providing and fixing PVC Green Tree Guard Fencing NET 1.5m height and
109 NPSR 60cm dia including Casaurina post support from 4 sides of the tree as per Each 213 1,000.00 213000.00
Pruning of existing Trees including removing the pruned branches, leaves,
trunks etc., disposed away about 15km from the site.
Maintanence of Trees including watering for Three years starts after 6 months
SUPPLY OF ROUND - CONTEMPORARY LIGHTING BOLLARD - (10W -
15W),Power Module LED, 3000K or 4000K , 800MM/ 1000MM Height ,IP65 -
The Bollard suitable for on ground installation,is made of 3mm thick (minimum)
extruded aluminium pipe. Top cover(156mm dia.,8mm thick & weight-0.7Kgs.) is
made of die cast aluminium in single piece. It's screen made of acrylic with high
impact resistance, in single piece. Pure polyester powder coating in Standard
Grey Colour. IP Rating - IP 65. Height – 1000mm, Dia - 127mm,Weight - 6Kgs.,
Area Exposed to Wind(S) - 0.126m2. LED Module on Printed Circuit Board with
metal core plate.Colour Rendering Index: Ra > 80.Electronic Power Supply for
LED Module, which offers Protection against Short Circuit, Over- Voltage &
OverCurrent. Estimated LED Lifetime L80 @50,000 hours minimum.LM 80
report from LED Manufacturer should be submitted. LM79 report from UL
Authorised laboratory shall be submitted. Sample should be submitted for
engineer incharge Approval.
SUPPLY OF Contemporary - Bollard : 2975.000 - Bollard made of spheroidal
cast iron. Entries for fixing the chain.The support is constituted of a cast iron
column (diameter: 102mm).The end component of the column has a neck mould
with two entries fused to the column and is suitable for the entry of chains with a
maximum diameter of 13mm..Materials- Spheroidal cast iron UNI EN 1563 ..
113 NPSR Bollard & its' parts are are painted in 3 layer coating (coating thickness-100 No 110.00 15,930 1752300.00
microns minimum) in which 1st layer with etch primer, 2nd layer with epoxy
primer & 3rd final layer with PU paint – customised colour Metallaic Grey. The
standard colour is customised colour Metallaic Grey. Dimensions -Dia.-
180mm,Height-700mm,Weight-19.5kgs. Accessories-The bollards can be
completed by chain and shackle, carabiner or stirrup.
Camouflaging the existing transformer along the sides of grand canal using with
12mm thick 'HDHMR' ( High Density High Moisture Resistance) board placed
114 NPSR and connected in a structural frame work of Mild steel and painting with water Sqm 588.00 2,800 1646400.00
based paint of pictures.The rate including labour, materials, necessory
scaffolding etc.,complete as directed by Engineer-in-charge
115 NPSR UG-Sewage connection(150houses) Each 150.00 25,000.00 3750000.00
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.06 18:13:28
Sl.No Code No Description of Work Unit Quantity Rate Amount
Providing and fixing 3M make reflective road studs of category Á raised
pavement markers made out of poly carbonate / ABS moulded body and
reflective panels with Number) micro prismatic Iens capable of providing total
internal reflection of the light entering the lens face with retro reflectance and
chromaticity values conforming to ASTM The reflective raised pavement
markers shall also confirm the length, height and width of the body shall not be
less than 100mm, 15mm and 90mm and base of marker shall be flat within
1.3mm(3 M equivalent). The marker shall support a load of 13635Kg tested in
accordance with ASTM D4280.
Lenses shall be moulded of polycarbonate or methy1 methecrylate conforming
ASTM D788 the area of each retro reflectory surface shall not be less than 13.0
sq. cm. The slope or retro – relection surface ahall be 35+5 degree to base.
Each reflector shall have a CIL not less values specified in table 1 of said MORT No 720.00 341.00 245520.00
& H circular and two cylindrical Polymer Shanks not less than 20mm diameter
and not less than 30mm length shall be provided for better anchorage with
bituminous grout D4280. Or epoxy mortor.
(B)- ELECTRICAL WORKS
SUPPLY & INSTALLATION OF ARCHITECTURAL LED LIGHT FIXTURE
MODEL - LIGHT UPRIGHT 851 (35W-45W) Power Module LED, 3000K,
UPRIGHT TYPE- The Light 851: it's upper square frame in single piece made of
diecast aluminum using pressure die-casting process, with a decorative element
which is also made of diecast aluminium using pressure die-casting process,
fixed on the top. Auxiliary and optical compartment can be accessed by tilting
the top frame. Bottom frame with Company/ brand name engraved in the mold,
in single piece, made of diecast aluminumu sing pressure die-casting process
with a four-armed bracket with flange, which is also made of die cast aluminumu
sing pressure die-casting process, fixed at the bottom. Frosted Screen made of
polymethylmethacrylate (PMMA) molded in a single piece using Injection
molding process. Screen's Impact resistance: IK06. Pure polyester powder
coating in Standard Grey Colour. Optical Compartment IP Rating - IP66.
Height–605mm, Length-325mm, Width-325mm, Weight-6Kg, Area Exposed to
Wind(S)-0.15m2. Power LED Module with Company /brand name printed on
PCB with the metal core plate, in compliance with IEC62031 (Supporting Test
Report from UL/UL Authorised Laboratory should be submitted). LED Chips of
CREE/NICHIA/OSRAM/LUMILEDS make shall be used-same should be
supported by LED manufacturer's tech sheet. Colour Rendering Index: Ra>70.
Electronic Power Supply for LED Module, which offers Protection against Short
Circuit, Over-Voltage & Over-Current, with in-built surge protection (an
additional surge protection device of 10kV also provided in-built the fixture).
Lens made of PMMA should offer TypeII, TypeIII, Type IV & Type V photometric
options. Projected LED Life time @ L90>1,00,000 hours @ Ts85°C. Supporting
LM80 report from LED manufacturer should be submitted to support the same.
The Light fixture shall be incompliance with IEC60598 (Supporting Test Report
from UL/UL Authorised Laboratory should be submitted). Power Module LED,
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.06 18:13:28
Sl.No Code No Description of Work Unit Quantity Rate Amount
SUPPLY OF 3M HEIGHT ARCHITECTURAL POST TOP POLE ALONG WITH
ORNOMENTAL CAST IRON COMPONENTS - 3M height Pole made of
complete cast iron decorative components where the internal fabricated pole of
3M is Made in combination of mild steel pipe sections 89mm dia., 48mmdia. &
covered on the outside by decorative cast iron base and columns. Decorative
Castiron Base design with the company/brand logo engraved in the cast iron
mould, starting with dia 260 mm for 130 mm height, followed by a ring of 260 mm
dia gradually tapering to a flat round surface of dia170mm for 366mm height
again followed by a ring dia 210mm and gradual tapering upto a dia 92mm as
approved by the econerned Engineer the total height of decorative cast iron
base is 700 mm and weight-32kgs. Decorative cast iron base should be
provided with a flush door of length 228 mm, width 124 mm and height 30 mm.
Decorative cast iron flower starting with a dia 102 mm increasing gradually to
160 mm and then tapering to a dia 99mm. Total height of cast iron flower is
304mm & weight is 6.3kgs.. Decorative cast iron column (2nos.) is of 80mm dia.
and having continuous grooves along the height. The height of each pillar is 750
mm & weight of each pillar is 9.5kgs. Decorative Castiron top starting with dia 80
mm and a ring of dia 96mm at height of 160mm then gradually increasing todia
120 mm the top half of the decorative top should have grooves along the length,
total height of cast iron top is 334 mm - weight-5.2kg. All cast iron part sweight
mentioned are with +/5% tolerance. Entire pole shall be made to provide
pleasing aesthetics as approved by Concerned Engineerin-charge. After
Fabrication, Entire Poleis hot dip galvanized (60micronsMinimum) for the
effective corrosion resistance. The hot dip Galvanised pole should be provided
with an inbuilt junction box to fix 32A connectors and 6AMCB, at the bottom - the
in built box should have a flush door of suitable size. The decorative pedastal to
be mounted on a suitable size steel plate. This mounting steel plate along with
foundation bolts of suitable size to be used for ensuring firm grouting in to the
specially designed RCC foundation. wind pressure calculation as per IS875
(part-3) & structural calculation report as per EN40 should be submitted to verify
the pole design. All the Cast iron parts are painted in 3 layer coating (total
coating thickness-200 microns minimum) in which 1st layer with Zinc Rich
Primer, 2nd layer with epoxy primer & 3rd final layer with Polyurathine(PU) Paint
- customized Colour Metallic Grey, as per ISO 12944 for C5M class
SUPPLY & INSTALLATION OF ARCHITECTURAL LED LIGHTFIXTURE -
LIGHT UPRIGHT 851 (35W - 45W) Power Module LED, 3000K, UPRIGHT
TYPE - The Light 851: it's upper square frame in single piece made of diecast
aluminum using pressure die-casting process, with a decorative element which
is also made of die cast aluminium using pressure die-casting process, fixed on
the top. Auxiliary and optical compartment can be accessed by tilting the top
frame. Bottom frame with Company / brand name engraved in the mold, in single
piece, made of die cast aluminum using pressure die-casting process with a four-
armed bracket with flange, which is also made of die cast aluminum using
pressure die-casting process, fixed at the bottom. Frosted Screen made of
polymethylmethacrylate (PMMA) molded in a single piece using Injection
molding process. Screen's Impact resistance: IK06. Pure polyester powder
coating in Standard Grey Colour. Optical Compartment IP Rating-IP66.
Height–605mm, Length-325mm, Width-325mm, Weight-6Kg, AreaExposed to
Wind (S)-0.15m2. Power LED Module with Company / brand name printed on
PCB with the metal core plate, in compliance with IEC62031 (Supporting Test
Report from UL/UL Authorised Laboratory should be submitted). LED Chips of
CREE/NICHIA/OSRAM/LUMILEDS make shall be used-same should be
supported by LED manufacturer's tech sheet. Colour Rendering Index: Ra>70.
Electronic Power Supply for LED Module, which offers Protection against Short
Circuit, Over-Voltage & Over-Current, with in-built surgeprotection (an additional
surgeprotection device of 10kV also provided in-built the fixture). Lens made of
PMMA should offer TypeII, TypeIII, TypeIV & TypeV photometric options.
Projected LED Life time@ L90 >1,00,000 hours @ Ts 85°C. Supporting LM80
report from LED manufacturer should be submitted to support the same. The
Light fixture shall be incompliance with IEC60598 (Supporting Test Report from
UL/UL Authorised Laboratory should be submitted). Wattage (35W-45W)
Power Module LED, 3000K
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.06 18:13:28
Sl.No Code No Description of Work Unit Quantity Rate Amount
SUPPLY OF 4.5M HEIGHTARCHITECTURAL TWIN ARMS
HEILAKDESIGNPOLEALONGWITHCASTIRONBASE&RING- 4.5M height twin
arm Pole Made of hot dip galvanised mild steel pipe sections 114 mm dia. & 89
mm dia. Decorative Brackets -2nos. each weight 15kg (sheliak design) with
decorate dleafs as shown in the diagram with a 3/4" GAS threaded tube with nut
and rose in stainless steel for attaching the light fixture and an internal tube for
the passage of a power cable made of cast iron in single piece, to get an arm
length of 550mm & pleasing aesthetics as approved. Arch. cast iron Base
design starts with 322 mm Dia. ring, radially tapers to 215mm for a height of
70mm, which is followed by a ring of 215mm dia,, then radially tapers to 135mm
for a height of 115mm. Total weight of the base is 15Kgs. & height of the base is
235mm. Decorative Ring (114mm/89mm, weight - 4kgs.) made of cast iron.
Decorative cast iron pole top starts from bottom with a ring section of dia. 67mm
followed by a ring of dia.75 mm, radially incrases to 100mm dia. for a height
15mm, then radially reduces to 46mm for a height 20mm followed by a jack
shaped section (45mm (W&20mm(H), followed by a ring of dia.60mm which is
followed by a Conical section (bottom dia.40mm & top dia. 10mm, 140mm(H)
120 NPSR with sphere shape (30mmdia.) on top -total height of the pole top is 260 mm & Nos. 62 53,966.12 3345899.44
weight is 2.5 Kgs. Entire pole & Bracket including all the cast iron elements shall
be made to provide pleasing aesthetics as approved by Concerned Engineerin -
charge. The pole to be provided with suitable size base plate. This base plate
along with foundation bolts of suitable size to be used for ensuring firm grouting
into the specially designed RCC foundation. After Fabrication, Entire Pole is hot
dip galvanized (60microns Minimum) for the effective corrosion resistance. The
hot dip Galvanised pole should be provided with an inbuilt junction box to fix
32A connectors and 6A MCB, at the bottom -the inbuilt box should have a flush
door of suitable size. The decorative pedastal to be mounted on a suitable size
steel plate. This mounting steel plate along with foundation bolts of suitable size
to be used for ensuring firm grouting into the specially designed RCC
foundation. wind pressure calculation as per IS875 (part -3) & structural
calculation report as per EN40 should be submitted to verify the pole design. All
the Cast iron parts are painted in 3 layer coating (total coating thickness -200
microns minimum) in which 1st layer with Zinc Rich Primer, 2nd layer with epoxy
primer & 3rd final layer with Polyurathine(PU) Paint - customized Colour Metallic
Grey, as per ISO12944 for C5M class
Supply and fixing of 50- 60W LED Street light luminaire, made of high pressure
die cast aluminum body, IP 66 optical & control gear compartment sealed by a
Polycarbonate protector integrated with lens, Impact resistance of IK 08. The
luminaire has efficacy of 120lm/W, CCT of 4000K and CRI ≥ 70. The Luminaire
is provided with a driver (efficiency > 85%) with internal surge protection of 4/4
kV and an external Surge Protection Device (SPD) of 10/10 kV (in both Common
and Differential modes), Power Factor > 0.95, THD < 15%, a residual flux of
70% (L70) @ 50,000 hours at Ta 40 deg C. CAT REF: NICE-O 60W NW LED
Supply and fixing of hot dipped galvanised swaged tubular street light poles with
pole top mounting option with following specifications.The pipe cross section is
used as per IS 1239: part 1 2004 & IS-1161:1998. The column made up of
tubular sections suitable to mount NIce O LED Luminaire of 60 W .The Pole
should be consisting of two sections. The bottom Section should be of
1000mmX127mm and the top section should be of 5000mm x 76mm and a slot
to mount the bracket which will be flushed with the bracket 150mmX 60mm.
122 NPSR Base plate dimensions should be 200mmX200mm with 16mm thickness.The Nos. 110 21,774.54 2395199.40
bracket should be seated on the pole and should be tightened with Grub screws
flushed with the pole as a single pole.The pole should be galvanised with Zinc
coating at an average of 80 microns on which two coats of zinc primer needs to
be provided and above that it should be given with two coats of UV resistant
polyeruthene paint. An inbuilt cable connection box of size 250mm X80mm with
provision for mounting and including 32A heavy duty connector & MCB. CAT
REF: Classic Pole GI / 6.0mtr - Pu painted with Pole Top mounting
Supply and Fixting of wether proof type under water lights 230V, 12 Watts IP 68
type LED fitting with nessasary fiting acceseries, etc.
Erection of metallic pole of following length in cement concrete 1:3:6 (1cement
Code No. :3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation
11.3.1 including excavation and refilling etc.as required - above 4.5 meter and upto 6.5
Supply of 3 1/2C x 185sqmm PVC/XLPE sheathed armoured aluminium U.G
cable-1.1 KV grade.
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.06 18:13:28
Sl.No Code No Description of Work Unit Quantity Rate Amount
Supply of 3.5C x 120sqmm PVC/XLPE sheathed armoured aluminium U.G cable-
Supply of 3.5C x 95sqmm PVC/XLPE sheathed armoured aluminium U.G cable-
Supply of 3 1/2C x 25sqmm PVC/XLPE sheathed armoured aluminium U.G
cable-1.1 KV grade.
Supply of 4C x 16sqmm PVC/XLPE sheathed armoured aluminium U.G cable-
130 NPSR Supply and drawing of 2.5 sq.mm 3 core flexible power cable Mtrs. 2746 113.28 311066.88
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of
Code No. 1.1 kV grade of following size direct in ground including excavation , sand
7.1.3 cushioning, protective covering and refilling the trench etc.as required - above
95 sq.mm and upto 185 sq.mm
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of
Code No. 1.1 kV grade of following size direct in ground including excavation , sand
7.1.2 cushioning, protective covering and refilling the trench etc.as required - above
35 sq.mm and upto 95 sq.mm
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of
Code No. 1.1 kV grade of following size direct in ground including excavation , sand
7.1.1 cushioning, protective covering and refilling the trench etc.as required - Upto 35
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of
134 1.1 kV grade of following size in the existing RCC / HUME / METAL pipe as metre 532 23.43 12464.76
required - upto 35 sq.mm
Supplying and making end termination with brass compression gland and
Code No. aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE
9.1.27 aluminium conductor cable of 1.1 kV grade as required - 31/2 X185 sq.mm (57
Supplying and making end termination with brass compression gland and
Code No. aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE
9.1.25 aluminium conductor cable of 1.1 kV grade as required - 31/2 X120 sq.mm (45
Supplying and making end termination with brass compression gland and
Code No. aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE
9.1.24 aluminium conductor cable of 1.1 kV grade as required - 31/2 X95 sq.mm (45
Supplying and making end termination with brass compression gland and
Code No. aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE
9.1.20 aluminium conductor cable of 1.1 kV grade as required - 31/2 X25 sq.mm (28
Supplying and making end termination with brass compression gland and
139 aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE per set 374 132.77 49655.98
aluminium conductor cable of 1.1 kV grade as required - 4 X16 sq.mm (28 mm)
140 Code No. 7.10 Supplying and fixing cable route marker with 10cm x 10 cm x per no 350 329.46 115311.00
Supply, installation, testing and commissioning of 415V Metering board
fabricated with 16G CRCA sheet steel, raised frame complete with 63Amps cut-
NPSR out fuse carriers and outgoing as 63 Amps fuse switch unit. The item including Set 4 17,310.60 69242.40
the provision for meter and proper sealing arrangements etc. all complete as
required by PED.
STREET LIGHT PANEL - OUTDOOR
Supply, Installation, testing and commissioning of 415V street light outdoor
panel fabricated with 14/16G CRCA sheet, powder coated with Siemens grey
NPSR (RAL 7032) after seven tank process and complete with welded & bolted design,
raised frame and all incoming & outgoing switch gears as per the following.
Suitable aluminuim busbars, bus couplers, control wiring, control MCB's etc.
1 No - 63A, 4P,MCB
1 Set - RYB indicating lamps with control MCB
32A SP MCB with Timer - 5 Set Set 4 138,314.88 553259.52
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.06 18:13:28
Sl.No Code No Description of Work Unit Quantity Rate Amount
CAPACITOR PANEL
Installation, testing and commissioning of 415V cubical type, fully non-
compartmenalised, floor mounted type automatic power factor correction panel
board fabricated with 16G CRCA sheet, powder coated after seven tank process
and complete with bolted design and the provisions as follows. Capacitors
should Gas filled cylindrical heavy duty type capacitors. The cable entry shall
143 NPSR be from the bottom/top, suitable aluminuim busbars, control wiring, control
fuses, metering compartment, phase indications, safety features and items
including necessary earthing throughout the bottom length, 6 sq.mm FRLS
copper wire interconnections for compartment earthing, complete copper control
wiring with crimping type ferrules, copper lugs, proper engravation on each
compartment etc.
Capacitors compartment/section shall have exhaust fans
The incoming shall have metering, Ammeter & Voltmeter with selector switches,
RYB indication lamp with control MCBs and 8 stage APFC relay etc.
Each outgoings shall have set of capacitor duty contactors, set of On/Off
indication lamps and set of On/Off push button etc.
i) 160A, TPN, 25KA, MCCB with thermal magnetic releases and rotary handle
mechanism & spreader - 1 No.
160A, TPN, 25KA, for 1 sec Aluminium bus bar
i) Phase: current density not more than 0.8A/sq.mm
ii) Neutral: half of the phase current (0.5 x phase)
iii) Earth : 25 x 3 mm copper flat
i) 10 KVAr feeder fitted with 63A TP 10KA MCB - 03 nos.
ii) 5 KVAr feeder fitted with 32A TP 10KA MCB - 03 nos.
iii) 2 KVAr feeder fitted with 25A TP 10KA MCB - 02 nos.
iv) 1 KVAr feeder fitted with 20A TP 10KA MCB - 01 nos. (to be connected directly)
Supply & Laying of Potential Earth Electrodes Model STANDARD PS53C 48mm
dia, wall thickness 3.25mm, terminal size :32 x 10 mm, terminal hole dia 12 mm,
144 NPSR hot dip galvanized 80 to 100 microns, 3 meler long, pipte inner space filled with Set. 16 8,560.48 136967.68
high conductive material, including 2 bags (25kg per bag) of Earth Life
Compound , as IS 3043. Base Metal :IS marked branded miled steel pipes.
Providing and fixing 25 mm x 5 mm copper strip in 40 mm dia G.I.pipe from
145 Code No. 5.10 earth electrode including connection with brass nut , bolt, spring , washer metre 435 1,166.42 507392.70
excavation and re-filling etc.as required
Supplying and laying 25 mm x 5 mm G.I strip at 0.50 meter below ground as
strip earth electrode , including connection / terminating with G.I. nut , bolt,
spring , washer etc.as required. (Jointing shall be done by overlapping and with
2 sets of G.I.nut bolt & spring washer spached at 50mm)
Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for
147 Code No. 5.7 conductor earth electode , including connection / termination with GI thimble etc. metre 870 30.88 26865.60
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop
earthing as required
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in
Code No. ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2
14.14.4 fine sand) including trenching (75cm deep) and refilling etc.as required - 100mm
Dia (Pipe Size not mentioned in PSR) for road crossing area
Providing , laying and fixing following dia G.I.pipe (medium class) in ground
150 complete with G.I.fittings including trenching (75 cm deep) and re-filling etc as metre 12 600.31 7203.72
required- 50mm dia
Providing , laying and fixing following dia G.I.pipe (medium class) in ground
151 complete with G.I.fittings including trenching (75 cm deep) and re-filling etc as metre QRO 1,027.34
required- 100mm dia
152 NPSR Supply and installation of 40mm dia HDPE pipe for cable raising. Mtrs. 1392 182.90 254596.80
Supplying and installing outdoor type Fixed Bullet type IP Camera with 1/3” 4MP
PS CMOS Image Sensor 4MP@25/30fps (2560 × 1440), IR Range of 30 Mtrs,.
153 NPSR The items inclluding necessary fixing accessories. Each 142 5,619.16 797920.72
Supply and fixing of 4 PoE Switches for CCTV IP Camera on suitable zinc-
154 NPSR passivated box complete with metal / Pvc box, front plate, screws and fixing Set 3 8,909.00 26727.00
accessories etc.
Supply and fixing of 8 PoE Switches for CCTV IP Camera on suitable zinc-
155 NPSR passivated box complete with metal / Pvc box, front plate, screws and fixing Set 40 11,101.44 444057.60
accessories etc.
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.06 18:13:28
Sl.No Code No Description of Work Unit Quantity Rate Amount
Supply, laying and termination of high quality CAT-6 Ethernet LAN cable
156 NPSR preferably with FR PVC insulation to be laid in exisitng from individual data to Mtr 1136 75.52 85790.72
network jack/switch/patch panel/hub located in the communication room.
Supply, laying and termination of high quality 6 core optical fiber cable (OFC)
157 NPSR preferably with FR PVC insulation to be laid in exisitng from individual data/Cctv Mtr 100 109.74 10974.00
to network jack/switch/patch panel/hub located in the communication room.
Supply, laying and termination of high quality 12 core optical fiber cable (OFC)
158 NPSR preferably with FR PVC insulation to be laid in exisitng from individual data/Cctv Mtr 4655 123.90 576754.50
to network jack/switch/patch panel/hub located in the communication room.
Supplying and installing of 64 Channel Network Video Recorder with Max
320Mbps incoming bandwidth Smart H.265+/H.265/ Smart
H.264+/H.264/MJPEG Up to 12MP resolution preview and playback Support 8
SATA HDDs up to 10TB Each, 4 USB (2 USB3.0, 2USB2.0) 2 HDMI / 2 VGA
simultaneous video output Support Multi-brand network cameras Support RAID
0/1/5/10 Mobile Software: iCMOB, gCMOB CMS Software: KVMS Pro. The items
including supply of 4TB hard disk, connectors, pins and providing complete
configuration etc.
Supplying and installing of 32 Channel Network Video Recorder with Max
320Mbps incoming bandwidth Smart H.265+/H.265/ Smart
H.264+/H.264/MJPEG Up to 12MP resolution preview and playback Support 8
SATA HDDs up to 10TB Each, 4 USB (2 USB3.0, 2USB2.0) 2 HDMI / 2 VGA
simultaneous video output Support Multi-brand network cameras Support RAID
0/1/5/10 Mobile Software: iCMOB, gCMOB CMS Software: KVMS Pro. The items
including supply of 4TB hard disk, connectors, pins and providing complete
configuration etc.
Supplying and installing of Power Supply Unit along with necessary Battery
backup, suitable for 1 nos. 64 channel network video recorder system.
Supplying and installing of Power Supply Unit along with necessary Battery
backup, suitable for 1 nos. 32 channel network video recorder system.
Supply, fixing and termination of high quality floor mounted type 6U floor
mountable powder coated Rack with 3x5A Power Manager, 1 position fan, min 1
nos of shelf, Front Glass double door with Lock & key with suitable network port
switch, fixing frames, links and interconnections, necessary accessories etc.
164 NPSR Supplying and installing of 43" LED colour monitor and fixing accessories. Nos 3 42,843.44 128530.32
Supplying and embedding following dia G.I.pipe (medium class) in pole collar /
165 foundation (during casting) for cable entry including bending the pipe to the metre 172 462.37 79527.64
required shape complete as required - 40 mm dia
166 NPSR Supply of three phase L.T 4 feet cross arm Nos. 83 2,758.51 228956.33
167 NPSR Erection of three phase L.T 4 feet cross arm Nos. 83 177.00 14691.00
Supplying and fixing of following sizes of medium class PVC conduit along with
168 accessories in surface / recess including cutting the wall and making good the metre 3725 122.48 456238.00
same in case of recessed conduit as required - 32mm
Supply, installation, testing and commissioning of metering per service charge
etc. all complete as required by PED - for Three phase
Removing of existing street lights poles, luminies, foundation of poles along with
170 NPSR existing cables & it's terminations and storage of all removed Items as per Lot. 1 236,000.00 236000.00
PED/site Engineer.
Payment charges towards Supervision, Service connection processing and
development charges etc., to Pondicherry Electricity Department.
(C)- Plumbing & Fountain works
Providing, laying and jointing G.I pipes of medium class (blue) conforming to IS
specification 1239 part I and ISI marked including transportation to the site ,
172 lowering to the trenches, laying to proper grade and alignment, testing of joints metre 6720.2 2,674.04 17970083.61
with required testing equipment, excluding GI specials such as bends,tees,
elbow,coupling,reducer etc.,complete all as per IS specification. -150mm dia
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.06 18:13:28
Sl.No Code No Description of Work Unit Quantity Rate Amount
Providing, laying and jointing G.I pipes of medium class (blue) conforming to IS
specification 1239 part I and ISI marked including transportation to the site ,
173 lowering to the trenches, laying to proper grade and alignment, testing of joints metre 4836.2 1,613.63 7803837.41
with required testing equipment, excluding GI specials such as bends,tees,
elbow,coupling,reducer etc.,complete all as per IS specification. -100mm dia
Providing, laying and jointing G.I pipes of medium class (blue) conforming to IS
specification 1239 part I and ISI marked including transportation to the site,
174 lowering to the trenches, laying to proper grade and alignment, testing of joints metre 4295 924.61 3971199.95
with required testing equipment,including GI specials such as bends,tees,
elbow,coupling,reducer etc.,complete all as per IS specification. -65mm dia
Providing and fixing C.I.sluice valves (with cap) complete with bolts,nuts,rubber
175 insertions etc. (the tail pieces if required will be paid separately) -150 mm each 5 7,735.29 38676.45
diameter -class I
Providing and fixing C.I.sluice valves (with cap) complete with bolts,nuts,rubber
176 insertions etc. (the tail pieces if required will be paid separately) -100 mm each 1 5,145.76 5145.76
diameter - Class I
Providing and fixing C.I. non return valve (PN 1) conforming to IS 5312 and ISI
Code marked, with bolts, nuts, rubber insertion etc.,complete (the tail pieces if
No.31.48.7F required will be paid separately) - 150 mm dia
Providing and fixing C.I. non return valve (PN 1.6) conforming to IS 5312 and ISI
Code marked, with bolts, nuts, rubber insertion etc.,complete (the tail pieces if
No.31.48.7D required will be paid separately) - 100 mm dia
Providing and fixing C.I. swing type single door Foot valve (PN 1) conforming to
179 IS 4038 and ISI marked, with bolts, nuts, rubber insertion etc.,complete (the tail Each 3 10,244.90 30734.70
pieces if required will be paid separately) - 150mm dia.
Supplying of electricallly operated horizontal split casing pump and motor AC 3
phase,415 volts,50 HZ,1500 RPM,squirrel cage motor.The pump shall have
bronze impeller,high grade steel shaft,flexible coupling set,including the cost of
180 common,M.S. Base plate,foundation bolts,etc.complete with suitable suction and no 3 741,575.87 2224727.61
delivery sizes.(100 HP centrifugal motor and pumpset).
Code Erection,testing and commissioning of the centrifugal motor pumpset with pipe
No.31.278.1D fittings,etc.complete.- 100 HP motor.
Supplying and fixing Fully Automatic Auto Transformer Starter (Pedestal Type)
with oil immersed contactors and auto transformer having 50%,65% and 80%
Code tapping with built in start stop push botton and thermal timer adjustable between
No.31.256.2E 3-12 seconds(Relay range in Amps 90-150) - 100 HP pumpsets
Supply, installation, testing and commissioning of stainless steel 1" sprinkler
183 NPSR type nozzle for flushing with threaded type including all necessary accessories Each 900 3,042.04 2737836.00
Supply, installation, testing and commissioning of stainless steel 1" finger jet
184 NPSR nozzle with 7 nose, threaded type including all necessary accessories as Each 110 5,892.92 648221.20
Supplying and erecting of Pre fabricated M.S structural steel supports such as
185 NPSR angle, Channel, Plate etc. conforming to relevant IS standards for laying Pipe. Kg 2293.32 188.80 432978.82
Providing and fixing C.I. Butterfly valve (PN 1) conforming to IS 13095 and ISI
Code marked, with bolts, nuts, rubber insertion etc., complete (the tail pieces if
No.31.48.9B required will be paid separately) - 65mm dia.
Supplying and fixing C.T. metering panel board as per Electricity Department
Specification. Panel board of size 1800mm x 900mm x 300mm made of 18
gauge CRMS sheet painted with two coats of enamel paint over Zinc chromate
Code No. primer with necessary MS base channel. The panel board shall include power
31.254.1 mat, copper busbar, 8mm thick Hylan sheet of size 84 x 54cm.
Total-C 36878814.73
GRAND TOTAL 249,453,506
GRAND TOTAL 249,453,506
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.06 18:13:28
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.06 MB
NIT Grand Canal.pdf
Tender Document
SCC.pdf
Tender Document
GCC Contracting 2019.pdf
Tender Document
Integrity Pact.pdf
Tender Document
List of Approved Make.pdf
Tender Document
Tender Drawings.pdf
Tender Document
Technical Specification.pdf
Tender Document
Tender BOQ.pdf
Tender Document
corrigendum-1088-Corrigendum 01.pdf
pdf • 0.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .