Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹70.2 LAccepted-AOC | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹74.6 L+₹4.4 L (6.30%)Rejected-AOC 27 19 F F D BLOCK CHATTARPUR EXTN SOUTH WEST DELHI DELHI 110075 | SOUTH WEST DELHI | DELHI | 110075 | L2 | Rejected-AOC Other than lowest bidder | |
| 3 | L3₹86.1 L+₹15.9 L (22.7%)Rejected-AOC | L3 | Rejected-AOC Other than lowest bidder | |
| 4 | L4₹88.6 L+₹18.4 L (26.2%)Rejected-AOC KOTHI NO 901 2ND FLOOR PHASE 3B 2 SAS NAGAR MOHALI PB 160059 | MOHALI | SAS NAGAR | PUNJAB | 160059 | L4 | Rejected-AOC Other than lowest bidder | |
| 5 | L5₹90.3 L+₹20.1 L (28.7%)Rejected-AOC NO 18 BHARATHI STREET WEST GANDHI NAGAR AVADI CHENNAI 600 054 | CHENNAI | THIRUVALLUR | TAMIL NADU | 600054 | L5 | Rejected-AOC Other than lowest bidder |
| Sl No | Description | Qty | Unit | SARJIT SINGH AND CO. L1 | M/s VARINDER PAL SINGH AND CO L4 | NEW GURBINDER INDUSTRIES L3 | 37AAOFJ7439G1ZV L7 | BKR Enterprises L5 | Baba Engineers and Contractors L6 | KULWANT SINGH L2 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L for preparing of old black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces by using mechanical means with using air blowers to remove all loose dirt,complete and applying two coat of Polymer Modified Emulsion (PME) with mineral filler as per manufacturer instruction and by using Spraying machine and technical description as per Note 'B'. For First coat with 0.6 ltrs undiluted PMEdiluted in 0.6 ltrs of water in 1:1 ratio and mineral filler as directed by manufacturer spraying machine having penetration value 10-20 mm initial setting time of 4-5 hours, but not more than 8 hours. First coat with 1.2 Ltrs of emulsion comprising of 0.6 Ltr (undiluted) PME diluted in 0.6 Ltr water, to be applied uniformally on each 1.0 Sqm area, mixed with mineral filler as recommended by manufacturer of PME and ensure uniform finish of PME on flexible surface means and using specially designed mopper for mopping the surface, and after drying of first coat as per manufacture instruction second coat with emulsion of 0.8 Ltrs comprising of 0.4Ltr (undiluted) PME diluted in 0.4 Ltr water to be applied uniformally on each 1.00 Sqm area after drying and setting of first coat.complete all as per manufacturer's instructions and direction of engr in charge complete all as specified.
MAKE: M/s Ooms Polymer Modified Bitumen Pvt Ltd , M/s Hindustan Colas Pvt. Itd, (HINMAT PLUS-PME), M/s LN Petro Chem Private Limited (EMULCOTE) | 72,990 | Sqm | 80.1 ₹58,46,499 Lowest | 105 ₹76,63,950 | 106 ₹77,36,940 | 167 ₹1,21,89,330 | 102 ₹74,44,980 | 115 ₹83,93,850 | 88.5 ₹64,59,615 |
| 2.00Notes: A The tenderer shall take into consideration for the following points while quoting his rate for this item and his quoted rates shall be deemed to be included the following:- (a) Using of PME Material having quick drying capacity and shall be provide atleast two spray trucks for application of PME at site. (b) Any Hampering/Stoppage of works due to ATC/Flight movement/any miscellenous reasons shall be borne by contractor and accordingly the works shall be stopped. No claim shall be made by contractor. (c) The work shall be carried out by authorized & qualified applicators of the manufacturer as approved by E in C. (d) Friction parameters shall be between 0.35 to 0.60 after application of PME. (e) Contractor will make necessary arrangements for procurement of Portable Skid Resistance Tester (PSTR) and carry out necessary testing as directed without any extra cost to the department. Skid resistance will be perform by the contractor without any extra cost at every 5000sqm (maximum) as directed by GE/Engr-in-charge. | ||||||||||
| 3.00(f) Two year warranty of material performance and application performance shall be obtained from the manufacturer of PME. Warranty will include the fact that structure will remain water tight and no further cracks will be formed, excluding damage caused by natural calamities. (g) Permeasbility test (ASTM D 2434) to be conducted on the surface prior and after to application of treatment. (h) A performance guarantee certificate for two years shall be submitted by the contractor to the GE on completion of work as specified. (j) Any number of trials patches of dimension 15mx15m at selected places for application of PME as directed by GE will be undetaken before commencement of treament. (k) Friction parameters, permeability parameters to ensure zero porosity, penetration of PME after application of both coats and micro and macro textures will be determined through relevant testing methods as directed by GE/Engr-in-Charge. (Qty. will be measured and paid under relevant items of first coat and second coat of PME. (l) Care shall be taken to fill gaps/cracks up to 3mm size with mineral filler as per manufacturer’s instructions. (m) Application of PME shall be done under the supervision of manufacturer's technical experts. | ||||||||||
| 4.00(n) The application of PME should be carried out on a clear day to avoid mixing of rain water with the PME based emulsion. (o) Provision of Rubber removal will be perform by AAI (Airport authority of India) well in advance which will be coordinated by GE and concered engr in charge and only thereafter PME works will be carried out as per scope of works. Notes : B As per E-in- C br dirns vide policy letter No 95610/Policy/116/E2W (RI-I) dt 23 Mar 2017, the spraying machine used in the works as per designed to mix PME, water and mineral filler to convert it into fine homogenous compound for application. The technical details and description of the spraying machine is as under:- (i) PME-Rejuvenator Mixer tank capacity ranging from 600 litres to 1400 Litres. (ii) Batch (PME- Rejuvenator and mineral filler) of capacity ranging from 450 litrs to 1250 Litres (iii) Machine output per hour 500-1000 Sqm per hour. (iv) Total connected pump power 10 HP -20 HP (v) water feeding system through 1 HP self priming moon set pump. (vi) Load cell based digital weighing system with digital display batch controller. (vii) Gear Ring & Rollers are accurately machined with gear cutting operation supported by heavy duty twin rollers to prepare homogenous mixtures. (viii) Microprocessor panel with digital control. | ||||||||||
| 5.00Notes : C -(i) Runway painting area i.e. Centre line,touch down zone,side stripe marking aiming point and all painting area will be covered before PME application.It will be ensured that the covering is not disturbed during application of PME. (ii) Runway centre line lights,touchdown zone light,runway edge light and other lights will be covered during application of PME and any damage to the existing lights will be made good without any extra cost to the Govt. (iii) The Area of these runway paintings mentioned in note C(i) above will not be considered in measurements of from the area of PME application. | ||||||||||
| 6.00 | Material and labour for painting one coat of water based paint after preparation of old surfaces as per manufacturer's instructions for making lines, dashes, arrows, letters etc. on bituminous/ concrete roads, pavement, runways and other similar surfaces exc. 10 cm width or girth, with road marking paint/ traffic paint (water based) conforming to the requirements of IS-164 (1981) thickness in micron not less than 50 micron, white or golden yellow or any other shade approved by GE/Users by using air less spray machine Graco line 3900 with two guns and the maximum GPM (LPM) : 160 (6.0) PSI (Bar) 3300 (227) Engine CC (HP) 120 CC and maximum tip size : 0.029, complete all as specified and directed as specified and directed by EIC. | 6,600 | Sqm | 36 ₹2,37,600 | 60 ₹3,96,000 | 37 ₹2,44,200 | 90 ₹5,94,000 | 90 ₹5,94,000 | 30 ₹1,98,000 Lowest | 55 ₹3,63,000 |
| 7.00 | Cleaning /racking out cracks/joints of runway and repair to pot holes by making to size exc 12 sqcm by cutting with cutter machine in flexible pavement and removing existing all loose and foreign materials to a distance exceeding 50 mtr but not exc 100mtr, cleaning the surfaces with wire brushes and then cleaning the surface with compressed air using compressor,priming the surfaces with primer Dencote primer 601 as per manufacture direction and filling with epoxy tar compound levelled with trowel complete all as specified and as directed by engineer in charge. | 1,700 | 1000 Cu Cm | 360 ₹6,12,000 | 390 ₹6,63,000 | 345 ₹5,86,500 | 390 ₹6,63,000 | 360 ₹6,12,000 | 400 ₹6,80,000 | 310 ₹5,27,000 Lowest |
| 8.00 | Cleaning the cracks with wire brush, making the surface free from dust and material & Labour for applying slurry seal containing polymeric modified bitumen emulsion, fine aggregate, cement & lime (1:1:1:1) and water as per requirement and the cracks shall be filled with the above mixture by trowel application, the size of cracks 2mm to 6mm and a depth of upto 10mm. After filling the cracks with the above compound, top surface of the crack shall be finished with the same compound uniformly and ensured finish of area complete all as per manufacture instruction and all as specified. | 4,500 | RM | 72 ₹3,24,000 | 30 ₹1,35,000 | 9.8 ₹44,100 | 15 ₹67,500 | 85 ₹3,82,500 | 5 ₹22,500 Lowest | 25 ₹1,12,500 |
Tender Value
Refer Docs
EMD Value
₹2.3 L
Closing Date
21 Aug 2025, 6:00 pmClosed
CWE AF Chandigarh
HQ CWE AF Chandigarh PIN-160003
REPAIR TO FLEXIBLE PAVEMENT WITH POLYMER MODIFIED EMULSION AND CERTAIN MISC WORKS AT AF STN CHANDIGARH
2025_MES_723038_1
CWE/AF CHD/CHD/T-06/2025-26
Open Tender
Civil Works
Item Rate
120 days
Chandigarh
As per NIT
8 documents required · 8 mandatory
₹1,000
GE (AF) Chandigarh
₹2.3 L
25 Sept 2025
28 Jul 2025
23 Aug 2025
28 Jul 2025
21 Aug 2025
7 Aug 2025
Amount
M&L for preparing of old black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces by using mechanical means with using air blowers to remove all loose dirt,complete and applying two coat of Polymer Modified Emulsion (PME) with mineral filler as per manufacturer instruction and by using Spraying machine and technical description as per Note 'B'. For First coat with 0.6 ltrs undiluted PMEdiluted in 0.6 ltrs of water in 1:1 ratio and mineral filler as directed by manufacturer spraying machine having penetration value 10-20 mm initial setting time of 4-5 hours, but not more than 8 hours. First coat with 1.2 Ltrs of emulsion comprising of 0.6 Ltr (undiluted) PME diluted in 0.6 Ltr water, to be applied uniformally on each 1.0 Sqm area, mixed with mineral filler as recommended by manufacturer of PME and ensure uniform finish of PME on flexible surface means and using specially designed mopper for mopping the surface, and after drying of first coat as per manufacture instruction second coat with emulsion of 0.8 Ltrs comprising of 0.4Ltr (undiluted) PME diluted in 0.4 Ltr water to be applied uniformally on each 1.00 Sqm area after drying and setting of first coat.complete all as per manufacturer's instructions and direction of engr in charge complete all as specified. MAKE: M/s Ooms Polymer Modified Bitumen Pvt Ltd , M/s Hindustan Colas Pvt. Itd, (HINMAT PLUS-PME), M/s LN Petro Chem Private Limited (EMULCOTE)
Notes: A The tenderer shall take into consideration for the following points while quoting his rate for this item and his quoted rates shall be deemed to be included the following:- (a) Using of PME Material having quick drying capacity and shall be provide atleast two spray trucks for application of PME at site. (b) Any Hampering/Stoppage of works due to ATC/Flight movement/any miscellenous reasons shall be borne by contractor and accordingly the works shall be stopped. No claim shall be made by contractor. (c) The work shall be carried out by authorized & qualified applicators of the manufacturer as approved by E in C. (d) Friction parameters shall be between 0.35 to 0.60 after application of PME. (e) Contractor will make necessary arrangements for procurement of Portable Skid Resistance Tester (PSTR) and carry out necessary testing as directed without any extra cost to the department. Skid resistance will be perform by the contractor without any extra cost at every 5000sqm (maximum) as directed by GE/Engr-in-charge.
(n) The application of PME should be carried out on a clear day to avoid mixing of rain water with the PME based emulsion. (o) Provision of Rubber removal will be perform by AAI (Airport authority of India) well in advance which will be coordinated by GE and concered engr in charge and only thereafter PME works will be carried out as per scope of works. Notes : B As per E-in- C br dirns vide policy letter No 95610/Policy/116/E2W (RI-I) dt 23 Mar 2017, the spraying machine used in the works as per designed to mix PME, water and mineral filler to convert it into fine homogenous compound for application. The technical details and description of the spraying machine is as under:- (i) PME-Rejuvenator Mixer tank capacity ranging from 600 litres to 1400 Litres. (ii) Batch (PME- Rejuvenator and mineral filler) of capacity ranging from 450 litrs to 1250 Litres (iii) Machine output per hour 500-1000 Sqm per hour. (iv) Total connected pump power 10 HP -20 HP (v) water feeding system through 1 HP self priming moon set pump. (vi) Load cell based digital weighing system with digital display batch controller. (vii) Gear Ring & Rollers are accurately machined with gear cutting operation supported by heavy duty twin rollers to prepare homogenous mixtures. (viii) Microprocessor panel with digital control.
Notes : C -(i) Runway painting area i.e. Centre line,touch down zone,side stripe marking aiming point and all painting area will be covered before PME application.It will be ensured that the covering is not disturbed during application of PME. (ii) Runway centre line lights,touchdown zone light,runway edge light and other lights will be covered during application of PME and any damage to the existing lights will be made good without any extra cost to the Govt. (iii) The Area of these runway paintings mentioned in note C(i) above will not be considered in measurements of from the area of PME application.
Material and labour for painting one coat of water based paint after preparation of old surfaces as per manufacturer's instructions for making lines, dashes, arrows, letters etc. on bituminous/ concrete roads, pavement, runways and other similar surfaces exc. 10 cm width or girth, with road marking paint/ traffic paint (water based) conforming to the requirements of IS-164 (1981) thickness in micron not less than 50 micron, white or golden yellow or any other shade approved by GE/Users by using air less spray machine Graco line 3900 with two guns and the maximum GPM (LPM) : 160 (6.0) PSI (Bar) 3300 (227) Engine CC (HP) 120 CC and maximum tip size : 0.029, complete all as specified and directed as specified and directed by EIC.
Cleaning /racking out cracks/joints of runway and repair to pot holes by making to size exc 12 sqcm by cutting with cutter machine in flexible pavement and removing existing all loose and foreign materials to a distance exceeding 50 mtr but not exc 100mtr, cleaning the surfaces with wire brushes and then cleaning the surface with compressed air using compressor,priming the surfaces with primer Dencote primer 601 as per manufacture direction and filling with epoxy tar compound levelled with trowel complete all as specified and as directed by engineer in charge.
Cleaning the cracks with wire brush, making the surface free from dust and material & Labour for applying slurry seal containing polymeric modified bitumen emulsion, fine aggregate, cement & lime (1:1:1:1) and water as per requirement and the cracks shall be filled with the above mixture by trowel application, the size of cracks 2mm to 6mm and a depth of upto 10mm. After filling the cracks with the above compound, top surface of the crack shall be finished with the same compound uniformly and ensured finish of area complete all as per manufacture instruction and all as specified.
KULWANT SINGH (BID ID -3401036)
NEW GURBINDER INDUSTRIES (BID ID -3400063)
M/s VARINDER PAL SINGH AND CO (BID ID -3392812)
BKR Enterprises (BID ID -3401615)
Baba Engineers and Contractors (BID ID -3394035)
37AAOFJ7439G1ZV (BID ID -3400533)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .