Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.7 LAccepted-AOC 37 SUBHASH NAGAR AIR FORCE JODHPUR 342 008 | JODHPUR | JODHPUR | RAJASTHAN | 342008 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹39.2 L+₹1.3 L (3.32%)Rejected-Finance | L2 | Rejected-Finance Being not Lowest | |
| 3 | L3₹40.4 L+₹2.4 L (6.44%)Rejected-Finance 19 PAOTA C IIIRD ROAD JODHPUR RAJ 342001 | JODHPUR | JODHPUR | RAJASTHAN | 342001 | L3 | Rejected-Finance Being not Lowest | |
| 4 | Rejected-Technical | - | Rejected-Technical Due to cat not avaolable |
Tender Value
₹38.1 L
EMD Value
₹76,200
Closing Date
10 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF JODHPUR
HQ CWE AF JODHPUR 342011 Rajasthan
CERTAIN MISC E/M AND B/R REPAIRS INCLUDING ROADS AT WSA AREA OF AF STN JODHPUR
2023_MES_632058_2
86058/E8
Open Tender
Civil Works
Item Rate
180 days
GE AF JODHPUR
As per NIT
8 documents required · 8 mandatory
₹500
GE AF JODHPUR
₹76,200
Yes
15 Mar 2024
19 Jan 2024
17 Feb 2024
19 Jan 2024
10 Feb 2024
27 Jan 2024
Amount
Repair to pot holes not exc 1sqm each including sweeping free from dust and mud ,or water ,scoring sunken surface in roads ,path etc cutting around edges to at least 25mm in depth making good by applying tack coat with VG-10 gde paving bitumen at 5 kg per 10 sqm, putting in premix as specified for think bituminous carpet (2 cm thick) well rammed and sealed with premixed sand seal coat (6.8 kg of binder with 0.06 cumof sand), again well rammed (including suppy of premix binder and sand) depth of potholes n exc 30mm.
M&L for applying evenly a priming /tack coat with bitumin emulsion pressure distributer with rapid setting bitumen emulsion on bituminous surface @0.25kg/sqm including preparing the surface & cleaning with mechanical brooming complete all as specified and as directed.
M&L Bituminous premix Semi dense Asphaltic concrete 30 mm average consolidated thickness with 5.5% binder content by weight of total mix with bitumen of grade VG-30 (conforming to IS-73-2006) laid/rolled and compacted to required gradient and camber with 8 to 10 toone complete all as specified and directed by Engr-in-Charge.
Painting lines, dashes, arrows, letters, etc., on roads, pavements and the like exc. 10 cm wide with Retro-Reflective Thermoplastic road marking paint, white or golden yellow, conforming to MoRT&H specification all as per manufacturer's specification and as directed.
Demolition of mud phuska on roofs any thickness including mud plastering (whether full thickness removed or only a part thereof ) and removal to a distance exceeding 500 m, complete all as specified.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for and making good but portion ordered to be dismantled as ditected by Engr-in Charge
M&L for Cement concrete type B-1 ,1:2:4 (20mm graded aggregate) as in padding layer on roof complete all as directed by Engineer-in-charge.
M&L for 10mm thick rendring in cement mortar 1:3 with water proofing compound @3% by weight of cement , on existing concrete surfaces on roof , finishing even and smooth without using extra cement complete all as specified & directed by the Engr-in -charge. Note: Water proofing compound shall be paid seperately as supply oinly.
M&L for brushing neat cement slurry @ 3 Kg of cement per sqm of surfaces complete all as specified & directed.
M&L for preparing new surfaces of roof and applying two coats of Polyurethane (PU) acrylic based water proofing liquid compound over and including a coat of diluted elastomeric self primer and reinforcement fabric sheet as per manufacturer’s instruction to stop leakage / seepage from roof / wall complete all as specified & directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm each and removing from site complete all as specified and as directed by Engr-in-Charge .
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm each and removing from site complete all as specified and as directed by Engr-in-Charge .
M&L for mild steel angle iron and other steel section rolled mild steel for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, confirming to Fe 290 (Gde E-165) complete all as specified and as directed by the Engr-in - Charge.
S&F Mild steel, plain, black 1.00 mm thick sheet in steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. required complete all as specified & directed by engineer-in-charge.
M&L for preparation of newly untreated surface of any description, over 10cm in width or girth, not otherwise described priming with red oxide, zinc chrome and applying two coat of synthetic enamel (ordinary tint) completed all as specified and directed.
M&L for squared rubble walling, Jodhpur type brought upt to courses well bonded, bedded & soildly hearted built in CM 1:4 completed all as specified and directed.
M&L for rendering 15mm thick in CM 1:4 on stone masonry including finish even and smooth (without using extra cement) completed all as specified and directed.
M&L for 100 mm thick, PCC 1:4:8, type D -2 (using 40 mm graded crushed stone aggregate), as in base of floor’s complete all as specified and directed by Engr-in- Charge.
S&F in repairs solid rubber beading of 30 to 50 mm wide and 5 to 6mm thick fixing with self tapping screws/washers at bottom to existing doors complete all as specified and as directed by Engr-in-Charge .
S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping/ drilling screws complete all as specified and as directed by Engr-in-Charge
S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping/drilling screws compplete all as specified and as directed by Engr-in-Charge
Excavation over areas n.exc 1.5 m deep and getting out in hard / dense soil complete all as specified and directed by Engr-in -charge
Removing excavated materials/ demolished material of outside MOD Land complete all as specified and directed by Engr-in -charge.
Material & labour for disconnecting, cutting and taking out unserviceable sealed unit rotory compressor 2Tonne capacity, single phase, 230 volt of including necessary modification of the foundation as required to suit the new compressor, vacumisation, pressure testing, leakage, rectification and supply & fixing of new compressor of same capacity and make including gas charging R-22/R-407C and testing complete all as specified & directed by the Engineer-in-Charge.
Material & labour for WATER JET servicing of SPLIT TYPE AC's of 1.5/2.0 Tonne capacity (complete indoor and outdoor unit by using service bag cover & cooling coil rinse solution for cleaning of coils), taking out the indoor top cover outdoor top cover from existing location, cleaning of cooling coil , condenser coil, and other components using clean water greasing of fan, motor, blower etc without damage any part and reinstall at the same location complete all as specified & directed by the Engineer-in-Charge. (Note: The contractor shall at his own cost arrange water for servicing purpose.)
Material & labour for sub main wiring with multistranded copper conductors 1100 volt grade IS- 694 marked drawn through and including metallic steel surface conduit pipe medium grade ISI marked (not less than 20 mm dia)along with fittings and accessories all on wall and surface on ceiling and also including the specified runs of specified size earth continuity conductor complete including taking down existing sub main wiring all as specified and directed by Engineer in charge. (2 runs of main cable one run of earth wire one run of PVC pipe will be measured as an one run) (a) 2 Run of 6.0 Sqmm cable and one run of 6.0 sqmm cable for earth wire.
S&F in replacement of sub main wiring with multistranded copper conductors 1100 volt grade IS- 694 marked drawn through and including non metalic PVC conduit pipe medium grade ISI marked (not less than 20 mm dia)along with fittings and accessories all fixed concealed on wall and surface on ceiling and also including the specified runs of specified size earth continuity conductor complete including taking down existing sub main wiring all as specified and directed by Engineer in charge. (2 runs of main cable one run of earth wire one run of PVC pipe will be measured as an one run) (a) 2 Run of 2.5 Sqmm cable and one run of 2.5 sqmm cable for earth wire.
Supply and fixing in replacement switch flame proof rotary type with termination box in LM6,16A,single pole250V Complete with all accessories.
Supply and fix in replacement flood light fittings LED flame proof ,water proof 100W IP 65,in cast alluminium alloy LM6 construction with toughnened glass fixed on wall including fixing fastners all as specified and directed (Make : Sudhir or equivellent)
Supply and fixing in repairs LED light fitting 2x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.
Supply & fixing in repairs condenser coil for split type AC 1.5/2.0 Tonne capacity of any make including charging of gas R-22/R407C complete all as specified & directed by the Engineer-in-Charge.
Supply & fixing in repairs sheet metal enclosure SPN with two pin and earth plug socket with & including 20Amps MCB 'C' curve single pole 240 Volt AC complete all as specified & directed by the Engineer-in-Charge.
Material & labour for finding out the leakage with the pressure test of the condenser or cooling coil of window type AC's/split type AC's of 1.5/2.0 ton and dismantling the same for repair, reassembling the same after repair the leakage point by brazing/soldering with and including charging the gas R-22 and testing the AC to the entire satisfaction of Engineer-in-Charge.
Material & labour for filling of Refrigerant R-22 complete all as specified & directed by the Engineer-in-Charge.
Material & labour in repairs fire resistance, elastomeric Nitrile rubber tubing (NBR) for Pipe insulation thickness 10mm of size ⅝"dia of split type AC's any capacity complete all as specified & directed by the Engineer-in-Charge.
Material & labour in repairs fire resistance, elastomeric Nitrile rubber tubing (NBR) for Pipe insulation thickness 10mm of size¼"dia of split type AC's any capacity complete all as specified & directed by the Engineer-in-Charge.
Supply & fixing in repairs flexible drain pipe ( PVC BRAIDED hose pipe) of size 15 mm dia, for split type AC any capacity and any make complete all as specified & directed by the Engineer-in-Charge.
Supply & fixing in repairs Running capacitor of capacity 50 MFD 230 volts, 50 Hz complete all as specified & directed by the Engineer-in-Charge.
Supply & fixing in repairs Running capacitor of capacity 2.5 MFD, 230 volts, 50 HZ suitable for indoor unit complete all as specified & directed by the Engineer-in-Charge.
Supply & fixing in repairs Running capacitor of capacity 4 MFD, 230 volts, 50 Hz.suitable for indoor unit complete all as specified & directed by the Engineer-in-Charge.
Supply & fixing in repairs Running capacitor of capacity 6 MFD, 230 volts, 50 Hz complete all as specified & directed by the Engineer-in-Charge.
Supply & fixing in repairs condensing fan motor of capacity 1.5/2.0Tonne for split type AC's single phase, AC 230 volts, 50 Hz of original make as per existing in the machine at site complete all as specified & directed by the Engineer-in-Charge.
Supply & Fixing in repairs AC motor suitable for Indoor unit blower of split type AC 1.5/2.0 Tonne of original make as per existing in the machine at site complete all as specified & directed by the Engineer-in-Charge.
Supply & fixing in repairs fan blades (ISI Marked) of suitable size for outdoor unit of 1.5/2.0 Ton Split type AC's complete all as specified & directed by the Engineer-in-Charge.
S&F in repairs MCB 6 to 32 Amps SP ,240 V ,10 KA 'C' curve,IP 20 complete all as specified and directed.
Supply & fixing in repairs MCB SP 40 Amp, ‘C’ curve type, 10 KA complete all as specified & directed by the Engineer-in-Charge.
S&F in repairs MCB 40 to 63 Amps SPN ,240 V C curve 10 KA,IP 20 complete all as specified and directed.
Material & labour for Reparing of PCB control card suitable for 1.5/2.0 Tonne capacity split type AC/window ac, single phase and make the PCB control card functional complete all as specified & directed by the Engineer-in-Charge.
Supply & fixing in repairs capillary copper tube (ISI Marked) of split /window type AC capacity 1.5/2.0 Tonne complete all as specified & directed by the Engineer-in-Charge.
S & F in replacement PCB control card suitable for 1.5/2.0 Tonne capacity split type AC/window ac, single phase and make the PCB control card functional complete all as specified & directed by the Engineer-in-Charge.
Supply and fix single pointed air termination aluminium rod 12mm dia 300mm long in replacement.
S&F in replacement aluminium strip 25x3.15 mm complete with saddles and fixing screw for fitting the strip in replacement
M&L in replacment copper strip 20mmx3mm complete with,protection sleeves, saddles,seprator and fixing screws at surrounding inside and outside the bldg.
S & Fin replacement galvanised iron pipe 40mm dia medium grade with all fittings complete all as specified and directed by Engineer-in-charge.
S&F in replacement of Seprator U type made of porcelene uses for Earth strip mounting with all nut bolts and connecting accessories directed as per engineer in charge.
M&L in replacment Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw. As required with all accessories
M&L in replacment of kota stone earth pit cover(2*2 feet) directed as per engineer in charge.
Dismantling of old unserviceable PCC earthing chamber, and Material & Labour for construction of PCC chamber made out of PCC 1:2: 4 type B1 using 20mm graded crushed stone aggregate and cover shall be 40mm thick RCC Pit cover made of precast cement concrete cover slab type B-1 (PCC 1:2:4) using 20 mm graded crushed stone aggregate , reinforced with mild steel XPM weighing not less than 4 kg/ Sqm, including necessary form work & surfaces of PCC Chamber Shall be finished smooth without using extra cement , Exposed surfaces shall be given three coats of white wash complete , minimum dimention of PCC Chamber shall not be less than as specified & shown on Plate No 3 of SSR Part I (2009). complete all as specified and directed by the Engineer in Charge. Note : The rate quoted for this item also includes necessary excavation and earth work, disposal of surplus soil/material to a distance not exc. 50 metres complete.
M&L in replacement for earthing complete with copper earth plate electrode 60cmx60cmx3.15mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to and including copper earth strip 20x3mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion and excavation and earth work in any type of soil, PCC 1:3:6 type C1 in chamber, precast RCC cover 50mm thick in cement concrete 1:2:4 type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4 Kg/Sqm) with cast iron frame, funnel with wire mesh, 20mm bore GI pipe medium grade watering pipe, lugs, 40mm bore GI pipe medium grade protection pipe upto 7.5m
M & L in replacement for earthing complete with GI earth plate electrode 60cmX60cmX6mm thick,buried directly in ground(earth pit not less than 2.25metres deep below ground level) with top edge of the platenot less than 1.5 m below ground level,connected to and including GI earth strip 32*6 mm by means of nuts,bolts,check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion and excavation and earth work in any type of soil, PCC 1:3:6 type C1 in chamber,precast RCC cover 50mm thick in cement concrete 1:2:4 type B1,reinforced with welded steel wire fabric or XPM (weight not less than 4 kg/sqm) with cast iron frame,funnel with wire mesh,20mm bore GI pipe medium grade watering pipe,lugs,40mm bore GI pipe medium grade protection pipe upto 7.7 m as directed.
Supply only of Potassium Nitrate (commercial name kalmi shora) in the earthing chambers for improvement of the existing earthing resistence complete all as specified and directed by the Engineer-in-Charge.
M&L in replacment of 35 sqmm multistranded flexible copper conductor with suitable mounting accessoreis. The mounting clamp should be Non conductive metarial used in earthing directed as per engineer in charge.
S & F copper lugs of size 36 sqmm complete all as directed
Supply & fixing 15 mm bore GI tubing medium grade,complete all as specified and as directed.
S & F in repairs HDPE pipe of 50mm dia complete with all accessories as directed and specified by Engineer in charge.
M & L for painting of existing steel tubular pole with two coats of aluminium paint after srapping old surface making clean as directed by Engineer in charge.
S & F 15mm Bib taps, cast copper alloy with crutch or butterfly handle,screweddown, screwed foriron pipe or forbrass ferrule and fixed complete all as specified and directed.
M & L for painting of earth pit including earth pit cover with red/yellow paint complete.
S & F 100 watt driver suitable for flame proof led lights complete all as specified and directed.
Om Trading Corporation
D DEV COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .