PROVN OF PLASTERING WORKS IN SWT STOPPAGE OF WATER LEAKAGE AT CERTAIN LOCATION AND PROVN OF TWO PANEL AT NEW SITE AND ALLIED WORKS AND ADDN/ ALTN TO LADIES WASH ROOM AT OFFICERs MESS AT AFS KUMBHIRGRAM

Amount

Taking down cement plaster of any description from brick/ stone wall surfaces including racking out joints, hacking for key, scrubbing down with water etc. and removing debris to a distance n.exc. 50 m complete all as specified and as directed.

Material and labour for rendering 15mm thick cement plaster on in two layers each of 10+5mm thick in Cement Mortar (1:4) with LW + @ 200ml/50Kg of cement on fair faces of brick work or concrete surfaces complete all as specified and directed. (Note : Integral water proofing compound shall be measured and paid separately )

Supply only LW + confirming to relavent IS MAKE : Dr. Fixit of M/s PIDILITE INDSTURIES or equivalent

Material and labour for preparation of newly plastered or unplastered surface of wall and applying two coats of weather coat paint(Cement based) including primer, complete all as specified and directed.

Material and labour for preparation of steel old surfaces surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint (first quality), complete all as specified and as directed.

Material and labour 100 mm thick Cement concrete type B-1), 1:2:4 (20 mm graded aggregate) including necessary form work as in flooring, pavings,swt floor surface finished even & smooth without using extra cement complete all as specified.

Demolition of cement concrete un-reinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level ) complete all as specified and directed.

Material and labour 75mm thick Cement concrete type C-2, 1:3:6(40mm graded aggregate) including necessary form work as in Plinth protection, surface finished even & fair without using extra cement complete all as specified.

Material and labour for supply,install testing and commissioning of LT outdoor panel double door front and back side openable with providing rubber/ PVC gasket of suitable size to all side of door of minimum size 800 mm (Height) x 600 mm (Breath) x 400 mm (Depth) CPRI approved factory made with bus bar chamber consisting of 4 nos of bus bar of capacity 200 Amps of aluminium bus bar 415 volts including digital multi function meter and Indicating lamps LED type ( R Y B) including wiring with suitable rated PVC insulated copper conductor wire and panel board outher door shall be made out of 3.0 mm thick CRCA steel sheet factory outlet including locking arrangements and mounted on pedestal of 30 cm height from ground level with suitable nuts,bolts and washers etc., detachable plate shall be provided at the bottom of the panel with necessary holes suitable for termination of various sizes of cables with glands and painting with two coats of super enamelled paint over a coat of metal primer all as specified and directed, including PCC (1:3:6) type C-2 as in foundation of size 0.8 m x 0.8 m x 0.6 m depth (30 cm below ground level & 30 cm above ground level) including necessary excavation and earth work complete all as specified and as directed alongwith comprising of the following accessories :- NOTE: (i) Rate of earthwork and PCC work are deemed to be inclusive in this item and connection to existing cable. (ii) CPRI approved certificate to be produced alongwith drg of panel (iii) Panel shall be suitable size to accomodate following items. (a) MCCB 4 pole 100 Amps, 50Hz of breaking capacity 25 KA - 01 No) (For incoming) (b) MCCB 4 pole 63 AMps,50Hz of breaking capacity 25 KA - 01 Nos (For outgoing) (c) MCB SPN 32 AMps,50Hz - 02 Nos) (For outgoing) (d) CT operated digital Multi function meter - 01 Nos (e) LED type Indicating lamp (set of 3 ) - 01 set (f) Necessary wiring including material, fixing and connection to existing load.

Earthing complete with galvanised steel earth plate electrode 60cm × 60cm × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron strip 25×4 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion. Note :- All the excavated remaining area after putting charcoal salt in layer filled with paddy soil (best quality from outside as required) for better hydration and excavated gravelly soil to be removed. A display borard of MS sheet thickness 3mm of size 20 cmx 20 cm painted all through red colour revited on 32 x 6 mm strip of length 0.5 mtr written in whicte colour. 1. Type of earthing - conventional GI Type, 2. Resistance value ............ Ohm, 3. Date of test ................... and earthing strip are duly brazed and at the connection and fixed with rust free nut and bolt spring washer on both side all are inclusive in quoted rate.

Taking down of chowkhats or frames n exc 1.5 sq. m each with shutters (without taking off shutters from the frame)

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Supply and fix Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing

Material and labour for timber fixed clean and swan second class hard wood in scantling all as directed and specified.

Material and labour brick work with sub class 'B' brick straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Material and labour brick work with sub class 'B' brick straight or curved on plan exc 6m mean radius in half brick wall built in CM 1:4 complete all as specified and directed.

Supply and fix Vitreous China wash down water closet pan (pedestal pattern), white including pedestal pan and trap, connection to drain (or out going pipe) and to flushing pipe, antisiphonage pipe, seat cover, flush pipe and fixing bolt etc Hindware one piece Flora S-220 Floor Mount western commode or equivalent all as specified and as directed.

Supply and fix table top wash basin of size 600x440x165mm make - Jaquar OPS-WHT-15931PM or equivalent excluding taps,

Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

Supply and fix for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

Supply and fix 100 mm Aluminium handles, cast type, anodised complete all as specified and directed.

Supply and fix 100mm Aluminium anodised, barrel tower bolts 12mm dia of extruded section and fixed (conforming to IS) complete all as specified and directed.

Supply and fix MS Butt hinges, medium weight, cold rolled 100mm ISI marked and fixed complete all as specified and directed.

Material and labour for 15mm thick Rendering on fair faces of brick work or concrete sureces in Cement Moratar 1:6 finished surface even and smooth without using extra cement. complete all as specified and directed

Material and labour for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

Supply and fix Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Supply and fix 15mm bore, medium grade galvanised steel water tubing with all fitting such as bends, elbows nipples, sockets, Tees, unions, short pieces etc & fixed complete to walls or ceilings or laid in floors all as specified and directed.

Supply and fix 110mm PVC(SWR) pipes Type 'A' single socketed in any length with rubber ring joints fixed to walls including taking down old existing pipe, complete all as specified and directed.

Supply and fix 75mm PVC(SWR) Rain water pipes single socketed in any length with rubber ring joints ISI marked fixed to walls complete all as specified and directed.

Supply and fix 110mm PVC(SWR) bend any radius 110mm bore with access door complete all as specified and directed

Supply and fix 75 mm PVC(SWR) bend any radius 110mm bore with access door complete all as specified and directed

Material and labour for Pre-cast reinforced cement concrete 1:2:4 type B1 as in cover slab of Man hole , septic tank, Soak well and gully trap etc set in CM 1:4 including demolition of damaged Man hole , septic tank, Soak well and gully trap and separating of reinforcement etc complete all as specified and directed

Supply and fix MS TMT 6mm to 8mm dia and over cut to length bent to shape required including cranking bending spirally and binding with and including mild steel wise (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in-Charge

Material and labour 20 mm thick Granite (of any type) 06121Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. all complete as specified and directed by E-in-Charge.

Supply and fix 15 mm bore angle cock with flange Cat No 8710-N Make : Prayag cast copper alloy, fancy type, chromium plated, screwed down,screwed both ends for iron pipe for unions and fixed complete all as specified and directed.

Supply and fix in repair 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed Make : Prayag or Equivalent Cat No 7502

Taking down carefully Aluminum point wiring (light, fan socket or power) complete incl. (fitting such as switches, ceiling roses, pendants, regulators, sockets, boards, DB, MCB, light fittings etc), removing materials from site and making good disturbed surfaces of walls, floors etc, complete all as specified and directed

Material and labour for point wiring with PVC insulated and unsheathed multistranded FRLS insulated unsheathed 1100 volt grade multi stranded Copper conductor cable of size 1.5 sqmm drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core FRLS insulated 1100 volt grade multi stranded FRLS Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly terminated into MS modular pressed steel box / PVC modular box of required size flushed in wall or on surface on faulse wall for light or Fan point or Ex Fan point controlled by one, one way switch 6/5 amp on modular white cover plate with frame of required size (modular pressed steel box, modular white cover plate with frame measured saperately) for mounting of switch complete all as specified and directed. Note: disturbed area of wall has to finish with cement mortar and match with existing colour of wall, rate of cement mortar and colour are inclusive in quoted rate

All as per item No 1 here-in before but for one 3 pin, 5 Amp socket point on the same board with other switch, complete all as specified and directed.

All as per item No 1 here-in before but for one 3/5 pin, 15 Amp switch socket combination on independent board with 2.5 sqmm PVC insulated unsheathed multistranded FRLS copper conductor, complete all as specified and directed

Material and labour for sub main wiring with 2 run of single core 4.0 Sqmm FRLS (ISI Marked) PVC insulated unsheathed multistranded copper conductor cable drawn through and including PVC Conduit/ casing capping of required size alongwith accessories on roof/walls/ ceiling etc including one run of 4.0 Sqmm FRLS (ISI Marked) PVC insulated unsheathed multistranded copper conductor as earth wire, including taking down old wiring, complete all as specified and directed. Note :- Two run of 4.0 Sqmm single core cable, one run of 4.0 Sqmm earth wire and one run of PVC conduit/ casing capping shall be measured as one run length

Supply and fix modular Switch single pole, one way 5 Amp complete all as specified and directed.

Supply and fix modular Switch single pole, one way 15 Amp complete all as specified and directed.

Supply and fix modular Socket 5 Amps, 230 volts, complete all as specified and as directed.

Supply and fix modular socket, 16 amps complete all as specified and directed.

Supply and fix ceiling rose, surface bakelite, 65mm x 50mm, two to three terminals complete all as specified and as directed.

Supply and fix modular white cover plate with frame of 3 module complete all as specified and directed.

Supply and fix modular white cover plate with frame of 6 module complete all as specified and directed.

Supply and fix Metal flush box of 3 module complete all as specified and as directed.

Supply and fix Metal flush box of 6 / 8 module complete all as specified and as directed.

Supply and fixing LED lights fitting 4 feet 20 watt 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing LED lights fitting 2 feet 10 watt 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fix heavy duty exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including testing complete all as directed. Note: For fixing of exhaust fan making hole through wall and plastering panting inclusive of quoted rate.

Supply and fix wall mounted touch free two waves automatic hand dryer auto cut off high grade ABS material, drying time 18-20 sec, 220 V AC, including provision of mounting and connection compelte all as specified and as directed.(Make: Dolphy, Euronics, Jaquar)

Supply and fix sheet metal enclosure MCB DB 4 way single pole with neutral for 240 V, fixed flushed on walls including necessary wall cutting and making good disturbed surfaces and blanking plate as per requirement complete all as specified and directed. Note: disturbed area of wall has to finish with cement mortar and match with existing colour of wall, rate of cement mortar and colour are inclusive in quoted rate

Supply and fix miniature circuit breaker (MCBs) SPN , 240 Volt, 32 Amps, "C" series,10 KA breaking capacity, complete all as specified and directed

Supply and fix MCB, SP, AC, 240 volts IP-43 of 6 to 32 Amps capacity "C" series and making connections incl taking down unsv one complete all as specified & directed.

Earthing complete with galvanised steel earth plate electrode 60×60cm×6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanized earth wire 4 mm by means of bolt, nut, check nut and washer of galvanized iron or steel earthing lead to be protected by galvanized iron pipe of 40 mm bore light grade and other end connected to earthing test point or main controlling switch as directed including providing funnel with 20 mm bore galvanized iron pipe medium grade for watering wire mess all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion as directed.

M/S SMRITI ENTERPRISE (BID ID -3455168)

M/s Nishi Kumar Das (BID ID -3460684)