Loading…
Loading…
Tender Value
₹3.8 Cr
EMD Value
₹3.8 L
Closing Date
6 Jul 2026, 6:00 pm
Similar tender results from the same govt authority in the past 3 years.
Superintending Engineer, Project Implementation Unit, Zone-6, Vadodara
Construction of New Maternity Home at CHC Singved Ta. Singvad Dist Dahod
314826
2026-27/37/04
Open
Civil Works - Buildings
Panchmahal
1 document required · 1 mandatory
₹6,000
PIU-GENERAL FUND A/C 11-114-Gandhinagar
₹3.8 L
16 Jun 2026
16 Jun 2026
16 Jun 2026
6 Jul 2026
16 Jun 2026
Name of Work :- Construction of New Maternity Home at CHC Singved Ta. Singvad Dist Dahod
Memorandom showing items of works to be carried out
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
1 304.30 Cum. Excavation for foundation upto 1.50 mt depth including sorting out and stracking of 160.89 Rupees One Hundred Cum.
usefulmaterials and disposing the excaveted stuff upto 50 mt lead (B) Dense or Hard Sixty And Paise Eighty
2 663.30 Cum. Excavation for foundation upto 1.50 mt depth including sorting out and stracking of 275.33 Rupees Two Hundred Cum.
usefulmaterials and disposing the excaveted stuff upto 50 mt lead (C ) Hard Murrum Seventy Five And Paise
Thirty Three Only
3 223.40 Cum. Excavation for foundation upto for depth from 1.5 M. to 3.0 M. including sorting out 284.69 Rupees Two Hundred Cum.
and stracking of usefulmaterials and disposing the excaveted stuff upto 50 mt lead Eighty Four And Paise
(D) Soft Rock not requiring Blasting Sixty Nine Only
4 183.00 Cum. Excavation for foundation upto for depth from 1.5 M. to 3.0 M. including sorting out 294.05 Rupees Two Hundred Cum.
and stracking of usefulmaterials and disposing the excaveted stuff upto 50 mt lead Ninety Four And Paise
(C) Hard Murrum Five Only
5 335.68 Cum. Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 hand 2679.92 Rupees Two Thousand Cum.
broken stone aggregate 40mm nominal size) and curing comoplete excluding cost of Six Hundred Seventy
form work in (a) foundation and plinth Nine And Paise Ninety
6 182.90 Cum. Providing and laying controlled cement concrete M250 work with curing etc. complete 4623.42 Rupees Four Thousand Cum.
including the cost of form work but excluding cost of Reinforcement for RCC work in Six Hundred Twenty
(A) Foundation footing base of columns and mass concrete. Three And Paise Forty
7 26.00 Cum. Providing and laying controlled cement concrete M250 work with curing etc. complete 6818.05 Rupees Six Thousand Cum.
including the cost of form work but excluding cost of Reinforcement for RCC work in Eight Hundred Eighteen
Column upto Plinth Level. And Paise Five Only
8 132.35 Cum. Providing and laying controlled cement concrete M250 work with curing etc. complete 6729.74 Rupees Six Thousand Cum.
including the cost of from workbut excluding cost of Reinforcement for RCC work in ( Seven Hundred Twenty
C) For Plinth Beam , Tie Beams at Ground Levels Nine And Paise Seventy
DTP Maternity Home CHC Singvad 1 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
9 398.40 Cum. P & L Brick work using common burnt clay Building bricks having crushing strength 3853.23 Rupees Three Thousand Cum.
not less than 35 Kg/ Sq.Cm. In foundation and plinth in cement mortar 1:6 (1 Cement: Eight Hundred Fifty
6-Fine sand) with curing etc.comp. (b) Conventional Three And Paise Twenty
10 728.80 Cum. Filling available excavated earth (excaluding rock ) in trenches. Plinth, sides of 137.47 Rupees One Hundred Cum.
foundation etc. in layers not exceeding 20cm. in depth consolidating each disposited Thirty Seven And Paise
layer by rammng and watering . Forty Seven Only
11 1511.10 Cum. Filling in foundation and plinth with murrum or selected soil in layers of 20 cm. 273.07 Rupees Two Hundred Cum.
thickness including watering, ramming and consolidating etc. Complete. Seventy Three And
Paise Seven Only
12 85.00 Cum. Providing and Laying ordinary cement concrete 1:2:4 (1- Cement 2- coarse sand : 4- 3728.86 Rupees Three Thousand Cum.
graded stone aggregates 20 mm nominal size) and finishing smooth with curing etc. Seven Hundred Twenty
complete including the cost of formwork but excluding the cost of reinforsement for Eight And Paise Eighty
R.C.C work in (floor slab,road etc.) Six Only
13 841.00 Sqm. Applying general insecticide pest control treatment to floors, cupboards etc including 54.39 Rupees Fifty Four And Sqm.
labour material etc. complete. Using Heptachloride 20 EC. As Per 6113_pests Paise Thirty Nine Only
Consentration Weight 0.50 percent is recommended one litre chemical emulsion
dillute with 39 liter of water will give. Total dillute concrentration will be 40 litre
inclusive of one litre chemical emulsion appication 0.5 Litre chemical / Sqm of surface
is recommended as per I.S
14 39.10 Cum. Providing and laying controlled cement concrete M200 work with curing etc. complete 7859.89 Rupees Seven Cum.
including the cost of form work but excluding cost of Reinforcement for RCC work in Thousand Eight Hundred
Column (for all floor) Fifty Nine And Paise
Eighty Nine Only
15 232.90 Cum. Brick work using common burnt clay building bricks having crushing strength not less 4141.66 Rupees Four Thousand Cum.
than 35 Kg/ Sq.Cm. In Super Structure above plinth level up to floor two level in One Hundred Forty One
cement mortar 1:6 (1 Cement: 6-Fine sand) with curing etc. (b)Conventional. for G.F. And Paise Sixty Six Only
16 15.65 Cum. Providing and laying controlled cement concrete M-200 with curing etc. complete 7744.19 Rupees Seven Cum.
including the cost of form work but excluding the cost of reinforcement for R.C.C. work Thousand Seven
in Lintel. (for all floor) Hundred Forty Four And
Paise Nineteen Only
DTP Maternity Home CHC Singvad 2 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
17 81.00 Cum. Providing and laying controlled cement concrete M-200 with curing etc. complete 6934.16 Rupees Six Thousand Cum.
including the cost of form work but excluding the cost of reinforcement for R.C.C. work Nine Hundred Thirty
in Beam for up to floor two level. (for all floor) (b) beam Four And Paise Sixteen
18 4.00 Cum. Providing and laying controlled cement concrete M-200 with curing etc. complete 6288.57 Rupees Six Thousand Cum.
including the cost of form work but excluding the cost of reinforcement for R.C.C. work Two Hundred Eighty
in Chajja. (for all floor) Eight And Paise Fifty
19 138.00 Cum. Providing and laying controlled cement concrete M-200 finishing with curing complete 7084.27 Rupees Seven Cum.
including the cost of form work but excluding the cost of reinforcement for R.C.C. work Thousand Eighty Four
in Slab upto floor two level GF And Paise Twenty Seven
20 4.05 Cum. Providing and laying controlled cement concrete M-200 finishing with curing complete 7122.93 Rupees Seven Cum.
including the cost of form work but excluding the cost of reinforcement for R.C.C. work Thousand One Hundred
in Slab upto floor two level FF Twenty Two And Paise
Ninety Three Only
21 4.00 Cum. Providing and laying controlled cement concrete M-200 with curing etc. complete 8257.94 Rupees Eight Thousand Cum.
including the cost of form work but excluding the cost of reinforcement for R.C.C. work Two Hundred Fifty
up to floor two level (for all floor)(A) Stair case Seven And Paise Ninety
22 69256.59 Kg. Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including Cutting, 77.29 Rupees Seventy Seven Kg.
bending, binding and placing in position complete upto floor two level (For all floor) And Paise Twenty Nine
23 46.90 Cum. Brick work using common burnt clay Building bricks having crushing strength not less 4180.17 Rupees Four Thousand Cum.
than 35 Kg/ Sq.Cm. In Super Structure above plinth level up to floor two level in One Hundred Eighty And
cement mortar 1:6 (1 Cement: 6-Fine sand) with curing etc. (b)Conventional. for F.F. Paise Seventeen Only
and above all floor
24 40.20 Sqm. Providing & Fixing UPVC Single Door Partly Glazed /Fully Glazed of Fenesta,LG 6812.45 Rupees Six Thousand Sqm.
Hausys,Kömmerling Veka as per Instruction of Architect .Doorwith Frame section Eight Hundred Twelve
58mmx60mm and door shutter of section size 102mmx60mm with Glass 5mm Thick And Paise Forty Five
including lock and aldrop with all necessary fittings and installation and filling gaps Only
with Silicon etc complete
DTP Maternity Home CHC Singvad 3 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
25 31.20 Sqm. Providing & Fixing UPVC Double DoorPartly Glazed /Fully Glazed of Fenesta,LG 7190.19 Rupees Seven Sqm.
Hausys,Kömmerling Veka as per Instruction of Architect .Door with Frame section Thousand One Hundred
58mmx60mm and door shutter of section size 102mmx60mm with Glass 5mm Thick Ninety And Paise
including lock and aldrop with all necessary fittings and installation and filling gaps Nineteen Only
with Silicon etc complete
26 23.10 Sqm. Providing & Fixing UPVC PartitionPartly Glazed /Fully Glazed of Fenesta,LG 3757.20 Rupees Three Thousand Sqm.
Hausys,Kömmerling Veka as per Instruction of Architect .Partition with Frame section Seven Hundred Fifty
58mmx60mm including with Glass 5mm Thick fittings and installation and filling gaps Seven And Paise Twenty
with Silicon etc complete Only
27 22.50 Sqm. Providing and fixing flush door both sides laminated using shutter fabricated from 35 2597.72 Rupees Two Thousand Sqm.
mm thick solid core malemine faced three layered pre laminated flat pressed wood Five Hundred Ninety
based exterior grade bonded BWP/BWR synthetic resin having stamped IS 12823 Seven And Paise
grade I type II including three coats of lacquer polishing to exposed wooden surfaces Seventy Two Only
and Stainless steel decorative type designs fixtures / fastening etc.including I.T.W.
triangular batten patti of size 30m.m.x30m.m.etc. as per architectural detailed drawing
and as directed by engineer in charge.
28 516.80 Rmt.Providing and laying 19mm x 65mm round, 'D' edge and polished granite pencil patti 196.95 Rupees One Hundred Rmt.
on top, with cement paste and including backing coat in C.M. 1:4. All joints filled with Ninety Six And Paise
colour / epoxy grout and wiped to give sharp joints with flush pointing and washed Ninety Five Only
clean with acid etc.
29 47.15 Sqm. Providing and fixing factory-made UPVC combination sliding window of Fenesta,LG 9378.86 Rupees Nine Thousand Sqm.
Hausys,Kömmerling make,System SY09 – Luxury Slider Combination, Design Code Three Hundred Seventy
615, overall size 1050 mm (W) × 2800 mm (H), comprising two fixed panels and two Eight And Paise Eighty
sliding shutters (configuration (DFix.DFix)/(XiX)).The window frame shall be made of Six Only
uPVC multi-chamber sections having dimensions and shutter members shall consist
of top & bottom rails of as per manufacturer’s specification.Each openable panel shall
be fitted with 6 mm thick toughened glass (SG TGH) and all fixed panels shall have
glass secured in the same profile system with EPDM gaskets and weather seals. All
sections to have Foil 2S Walnut finish on both sides, with necessary hardware
including handles, locks, rollers, and interlocking profiles. The installation shall be
complete in all respects, ensuring perfect alignment, smooth operation, and weather
DTP Maternity Home CHC Singvad 4 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
30 6.70 Sqm. Providing & Fixing UPVC Ventilation with Movable Louvers of Fenesta,LG 10651.46 Rupees Ten Thousand Sqm.
Hausys,Kömmerling Veka as per Instruction of Architect .Ventilation with Frame Six Hundred Fifty One
section 55mmx60mm including with Glass 5mm Thick fittings and installation and And Paise Forty Six Only
filling gaps with Silicon etc complete
31 6.85 Sqm. Providing and fixing in position collapsible steel shutters with vertical channels 20 X 10 2419.89 Rupees Two Thousand Sqm.
X 2mm braced with flat iron diagonals 20 X 5 mm size with top and bottom rails of T- Four Hundred Nineteen
irn 40 X 40 X 6mm with 38mm dia steel pulleys, complete with bolts, nuts, locking And Paise Eighty Nine
arrangements stoppers, handles including applying a priming coat of read Iead paints Only
32 1255.00 Kg. Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. 110.31 Rupees One Hundred Kg.
with M.S. flats at required spacing in and frame around square or round bars with Ten And Paise Thirty
round headed bolts and nuts or by screws. (A) Plain Grill. One Only
33 19.30 Sqm. Providing and fixing 0.60 meterwide and 0.80Metr high sand which type platform 5178.73 Rupees Five Thousand Sqm.
including supplying and fixing granite stone 18 mm thick mirror polished stones in top One Hundred Seventy
and side position and vertical strip at front over 25 mm thick polished kotah stone Eight And Paise Seventy
platform fixing in top and sides and intermediates supports fixing with cement mortar Three Only
and adhesive and finishing etc complete.
34 23.90 Sqm. Providing and fixing Godrej Type Steel cupboards in wall withsteel frames and 4683.37 Rupees Four Thousand Sqm.
shutters using 18 gauge M.S. steel sheet including necessary fixtures , fastening like Six Hundred Eighty
locks handles, hinges with approved shade of sparay painting etc complete as Three And Paise Thirty
directed Seven Only
35 25.50 Sqm. Providing and laying machine cut free edges machine polished Kota stone for shelves 1151.42 Rupees One Thousand Sqm.
in cupboard and walls in single piece (Miximum 150mm) 25 mm. th. including cutting One Hundred Fifty One
grooves in walls and fixing the stone with neat cement slurry in true line and level as And Paise Forty Two
direct. including moulding where required Only
DTP Maternity Home CHC Singvad 5 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
36 599.20 Sqm. P & L 24" x 48" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement 1990.71 Rupees One Thousand Sqm.
mortar 1:6 (1 cement: 6 coarse sand) on new surface or fixing on existing flooring by Nine Hundred Ninety
adhesive material including dismentaling of existing flooring and jointed with color And Paise Seventy One
cement slurry including finised with flush pointing & cleaning the surface etc. complete Only
for light shade/ Dark Shade and providing and filling epoxy based grout in grooves of
size up to 6mm x 6mm in flooring or dado with PVC spacer of BAL Endura / Kerakoll /
BASF or equivalent as per approved make of approved shade and color. Rate shall
be inclusive of protecting the edges, cleaning the grooves before filling and protecting
tile upto satisfaction of EIC. Rate shall be inclusive of filling groove through epoxy
based filler with PVC spacer as per manufacturer specification. Item shall be paid in
theoretical consumption on site.
37 99.70 Sqm. Providing and laying Granite slab (18 mm thick) one side polished flooring ,Stair Riser 2199.78 Rupees Two Thousand Sqm.
Tread over 20 mm (average) base of cement mortar 1:6 (1 cement: 6 coarse sand) or One Hundred Ninety
L.M 1:1.5 laid and jointed with grey cement slurry including rubbing and polishing Etc Nine And Paise Seventy
complete. Eight Only
38 182.40 Sqm. Providing and laying 24" x 24" Vitrified double charge 8 mm thick tile flooring over 20 1472.91 Rupees One Thousand Sqm.
mm (average) base of cement mortar 1:6 (1cement : 6 coarse sand) or L.M 1:1.5 laid Four Hundred Seventy
on new surface or fixing on existing flooring by adhesive material including Two And Paise Ninety
dismentalling of existing flooring and jointed with colour cement slurry including One Only
finished with flush pointing & cleaning the surface etc.Pattern Colour and shade as
approved by architect. etc completed & Fitting Tiles with Spacer 4mm/5mm thick and
filling Groove with approved epoxy sealant and Hardner Resin as directed by A.I.C.
complete For Antiskid
39 1530.20 Sqm. Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting risers of 1733.16 Rupees One Thousand Sqm.
steps and dedo on 10mm thick cement plastered Wall and Jointing or fitting tile with Seven Hundred Thirty
Tile adhesive Chemical(Roff,K2,Laticrete,Mapisa,pidilite C2TE S1 Only) and Three And Paise Sixteen
providing 4mm/5mm thick Spacer and filling Groove with approved epoxy sealant and Only
Hardner Resin epoxy based grout( BAL Endura / Kerakoll / BASF or equivalent as per
approved make & approved shade and color) in grooves in flooring or dado removing
PVC spacer etc. complete.as directed by A.I.C..
DTP Maternity Home CHC Singvad 6 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
40 19.10 Sqm. Providing and laying chequered terrazo tiles 22mm thick with marble chips of sizes 788.35 Rupees Seven Hundred Sqm.
upto 6mm in floors on 25mm thick bed of Lime mortar 1:1.5 (1-Lime putty : 1.5 coarse Eighty Eight And Paise
sand) or C.M. 1:6 (1 - cement : 6 - coarse sand) jointed with neat cement slurry mixed Thirty Five Only
with pigment to match the shade of the tiles including rubbing and polishing complete.
(B) Dark shades using ordinary cement.
41 970.00 Sqm. Providing 10mm thick cement plaster in single coat onbrick/concrete walls for interior 229.17 Rupees Two Hundred Sqm.
plastering upto floor two level and finishing with floating coat of neat cement slurry Twenty Nine And Paise
even and smooth in (i)Cement mortar 1:3 (1-cement:3-sand) on ceiling and soffit Seventeen Only
42 919.10 Sqm. Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single 253.61 Rupees Two Hundred Sqm.
or half brick walls for interior plastering upto floor two level and finishing with floating Fifty Three And Paise
coat of neat cement slurry even and smooth in (i) Cement mortar 1:3 (1-cement:3- Sixty One Only
43 313.50 Sqm. Providing 15 mm thick cement mala plaster in single coat on fair side bricks/concret 283.04 Rupees Two Hundred Sqm.
walls for interior plastering up to floor two level finished even and smooth in cement Eighty Three And Paise
mortar 1:4 (1 cement : 4 sand) etc complete. First Floor Four Only
44 1073.50 Sqm. Providing 20 mm thick double coat mala cement plaster on interior brick / concrete 290.71 Rupees Two Hundred Sqm.
work for plastering comprising of base coat of 12 mm thick cement plaster in cement Ninety And Paise
mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of Seventy One Only
cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including
scaffolding curing etc. complete.
45 1073.50 Sqm. Providing and applying 2mm thick Texture Plaster Terre Plaette (Specturm, Coral or 383.80 Rupees Three Hundred Sqm.
equivalent) incoprating fine fillments made of polymer and aggergating natural stone Eighty Three And Paise
powder with making grooves on base coat of 20 mm thick smooth mala plaster (which Eighty Only
paid seperately) etc. complete.Colour and shade as approved by Architect/ Engineer
in charge for at all floor, all height.
46 2131.00 Sqm. Applying two coats of birla(White cement based) or Asian (acrylic lappy putty) or 40.59 Rupees Forty And Paise Sqm.
equivalent two coats of primer of approved brand and manufacture on new wall Fifty Nine Only
surface to give an even shade including thoroughly brushing the surface free from
mortar dropping and other matter foreign and sand papered smooth.
DTP Maternity Home CHC Singvad 7 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
47 2131.00 Sqm. Providing and applying Wall painting (three coats) with plastic emulsion paint of 128.38 Rupees One Hundred Sqm.
approved brand and manufacture on under coated wall surface to give and even Twenty Eight And Paise
shade including throughly brushing the surface free from mortor droppings and other Thirty Eight Only
foreign matter and sand paperd smooth on new work to give an even shade.for all
48 1073.50 Sqm. Finishing wall with weather proof exterior emulsion paint (Apex) on wall surface (two 122.14 Rupees One Hundred Sqm.
coats) to give an required shape even shade and including priming coat and after Twenty Two And Paise
thoroughly brushing the surface to remove all dirt, and remains of loose powdered Fourteen Only
materials.etc complete.
49 77.00 Sqm. Painting two coats (including priming coat ) on new steel & other metal surfaces with 138.78 Rupees One Hundred Sqm.
enamel paint brushing interior to give an even shade including cleaning the surface of Thirty Eight And Paise
all dirt , dust & other foreign matter. Seventy Eight Only
50 870.00 Sqm. Providing and laying chaina mosic water proofing treatment on terrace including 1136.38 Rupees One Thousand Sqm.
applying neat cement slurry 2.75 Kg./Sqm. Of cement admixed with water proofing One Hundred Thirty Six
compound after cleaning the surface (b) laying cement concrete usig brick bats 25 to And Paise Thirty Eight
100 mm size with 50% C.M. 1:5 (1 cement : 5 coarse sand) admixed with water Only
proofing compound over 20 mm thick layer of C.M. 1:5 to required slope including
rounding of junction of walls and slabs (a) after two days of proper curing applying a
second with 20 mm thick C.M. 1:4 and china mosaic tiling and finally finishing the
surface with trowel white cement slurry (e) after finishing the whole terrace shall be
flooded with water for a period of two weeks.
51 45.00 Each Providing and fixing 3mm thick PVC sheets as signage and display of health 333.30 Rupees Three Hundred Each
signs/information of required size having retro reflective letters/design as per Thirty Three And Paise
requirement, fixing the same through approved adhesive etc. complete, work shall be Thirty Only
carried out as per instruction of engineer-in-charge. (Approved make PVC foamed
sheets only)(45 x 15 cms)
52 31.30 Qtl Steel work welded in built up sections framed work including cutting, hoisting, fixing in 9108.48 Rupees Nine Thousand Qtl
position and applying a priming coat of red lead paint. [A.] In beams and joists, One Hundred Eight And
channels angles tees, flats with connecting plates or angle cleats as in main and cross Paise Forty Eight Only
beams, Hip and jack rafters, purlins connected to common rafters and the like.
53 200.00 Sqm. Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L 734.19 Rupees Seven Hundred Sqm.
Hooks, Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer or G.I. Thirty Four And Paise
limpet washer. filled with white lead complete excluding the cost of purlins, Rafters Nineteen Only
and Trusses.(1) 0.80 mm thick sheet.
DTP Maternity Home CHC Singvad 8 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
54 208.00 Sqm. Providing and Placing Bed SIde Medical Curtain with S.s. Rail with SS Ring etc 2020.00 Rupees Two Thousand Sqm.
complete rate incl. fabric fitings & accessories of approved make curtain fire retardent Twenty Only
55 143.60 Sqm. Providing and laying 16-18 mm thick polished granite stone machine cut in single 4018.79 Rupees Four Thousand Sqm.
piece (Max. available) in sill and jambs of door, window,ventilation & lift wall Eighteen And Paise
cladding,staircase risers & treads, skirting laid over 10 mm thick cement Plaster and Seventy Nine Only
Jointed with only Tile Adhesive chemical(Roff,K2,Laticrete,Mapisa,pidilite C2TE) with
matching pigment incl. rubbing and polishing,half rounding edge and incl. fixing of hilty
fastener at every 1/3 span of sill as required size etc. complete colour and shed as
approved by architect engineer in charge.
56 50.00 Rmt. Fabricating, supplying and fixing in position SS railing for staircase with brush finish 2593.45 Rupees Two Thousand Rmt.
and 316 grade as per Indian Standrd and detailed drawing including grinding, cleaning Five Hundred Ninety
and filling the welded spots with SS finish (Only standard measurements will be paid Three And Paise Forty
for). Five Only
57 10.00 Nos Fabricating, supplying and fixing in position GRAB BAR 18" (450MM) for handicapped 1793.76 Rupees One Thousand Nos
toilet with brush finish and (S.S.304) grade as per Indian Standrd and detailed Seven Hundred Ninety
drawing including grinding, cleaning and filling the welded spots with S.S. finish. Three And Paise
Seventy Six Only
58 82.26 Nos Wall Painting (two coats) with antibacterial polyrethane epoxy paint approved brand 311.08 Rupees Three Hundred Nos
and manufacture on internal walls to give an even and smooth surface. Thoroughly Eleven And Paise Eight
brushing the surface free from mortar dropings and other rorieng matte and sand Only
papered smooth etc completed as directed by E.T.C/PMC .
59 797.40 SQM Pro. And fixing single layer water proof gypsum board 12.5 mm thick sections using 606.95 Rupees Six Hundred Six SQM
water proof board of size 1220 mm x 1830 mm x 8.0 mm suspended by GI suspender And Paise Ninety Five
channel of size 25 mm x 3 mm with intermediate channel og size 18 mm x 40 mm x Only
0.8 mm at 1220 mm center to center ceiling section of size 40 mm x 35 mm x
mm at 457 mm c/c nd perimeter channel A of size 20 mm x 27 mm x 30 mm x 0.5 mm
at edges & drops incl.paper tap sand sofit cleat, anchor fastener, scoch bolt
connecting cleat,joining compound top coat on ceiling incl.making necy.opening for
light fitting,diffuser etc. comp. as per detail drawing as directed
DTP Maternity Home CHC Singvad 9 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
60 23.50 CUM Providing, laying controlled cement concrete M 250 and curing complete including the 8387.38 Rupees Eight Thousand CUM
cost of form work (rates for centering, shuttering, formwork staging scaffolding for Three Hundred Eighty
considering up to 4.50m height) but excluding reinforcement for reinforced concrete Seven And Paise Thirty
work in: (D) RCC Wall (i) up to Ground Floor slab level Eight Only
61 25.00 Nos. Supplying FRP Planter 15”x15”x15” made of white or any shade required FRP (Fibre 2601.76 Rupees Two Thousand Nos.
Reinforced Polymer) Planter Six Hundred One And
Paise Seventy Six Only
62 75.70 Sqm PVC Fluted Panel Wall Panelling : Providing & Fixing wall paneling made from 12mm 5226.75 Rupees Five Thousand Sqm
thk Marine plywood ( IS:710 ) grade with back cladding of 3-4 mm ACP sheet fixed Two Hundred Twenty Six
level on wall with necessary hardware & Facia / Front Cladding with 10 to 12 mm And Paise Seventy Five
Thick PVC Fluted Panel Patta of approved make finished with groove pattern With Only
TOP & Side Edges Covered with Teak Wood Beading Patti as per detailed Drawings
and design completed finish as directed by EIC / Architect as per the sample
approved by the Architect.
63 189.50 Sqm Providing and making PVC planks for FALSE CEILING/wall covering using 8mm 2149.28 Rupees Two Thousand Sqm
thick Panel Size of 250mm Wide x 3000 mm Length with wooden or approved One Hundred Forty Nine
Shade and pattern & including all hardware fixtures and fasteners, S.S. screws, grips And Paise Twenty Eight
& Conrner angles including necessary framework wheerever required and as per Only
design, pattern, shapes and levels specified in detail drawings including cutting for
light fixtures. Complete as per architect's instructions & sized specified in detail
drawings.Material selection should be as per engineer in charge and architect.
64 82.80 Sqm shrubbery Plantation: Supplying well grown shrub plants of average height 3' to 4' and 1133.07 Rupees One Thousand Sqm
planting in 300 x 300 x 300 mm size pits by mixing of FYM & existing soil in ration 1:3 One Hundred Thirty
with soil, pesticide & insecticide. Plants should be disease free and fungus free in 8" x Three And Paise Seven
10" polythene bag. Plastic bags or pots should be removed carefully and soil around Only
the roots should not be dropped or disturbed much. Bill shall be plaaced after 45 days
of plantation of shrubs. Mortality rates to be inclusive. work shall be done as shown in
the drawing or as directed and approved by EIC/Architect. The ground coverage
should be dense and uniform throughout the planting area.
DTP Maternity Home CHC Singvad 10 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
65 25.00 Nos. Tree Plantation: supply and planting of tree of specified variety including excavation of 759.89 Rupees Seven Hundred Nos.
pit 600 × 600 Fifty Nine And Paise
x 600 mm depth mixing of FYM & existing soil in ratio 1:3 termite treatment and Eighty Nine Only
planting of plants (height 8' x 10" above bags/pots). Soil mounts 4'-8" in size. Tree
plantation should be carried on neatly accurately and with perfection as per drawing
and instruction given by the ECI. Plastic bags or pots should be removed carefully and
soil around the roots should not be dropped or disturbed much. Bill shall be placed
after completion of maintainance period but not before stablizing the hedges. Rates
for mortality to be inclusive. Providing and fixing tripod made of wooden ball, height
1.50 mtr. Top bracket to be 300 mm x 300 mm leg embedded in ground up to 300 mm
and to have tar coat. Work shall be done as shown in the drawing or as directed and
approved by ECI.
66 25.00 Nos. Fibre Pot Container 35x35cm 2226.73 Rupees Two Thousand Nos.
Two Hundred Twenty Six
And Paise Seventy
67 268.40 Sqm Semi Carpet Lawn as per park and Garden SOR Gandhinagar 121.42 Rupees One Hundred Sqm
Twenty One And Paise
68 35.00 Nos. Providing and fixing bright finish 2 mm thick Stainless steel (Grade 304) letters size up 542.37 Rupees Five Hundred Nos.
to 350 cm height in English language fixed in wall with screws and nails and any Forty Two And Paise
height including scaffolding etc complete as per instruction of Engineer-in-charge. Thirty Seven Only
69 13.80 Mtr Providing and fixing in position S.S. daso by providing top 50 mm dia stain less steel 1689.73 Rupees One Thousand Mtr
pipe rail with starting and end point vertical post of 50 mm dia with wall/column Six Hundred Eighty Nine
including bending welding and fixing for staircase and balcony as directed. (testing is And Paise Seventy
required of s.s 304) for all floor Three Only
70 426.20 Sqm Providing & Fixing the Chikenmesh - 20 guage (Crimp Jali) of approved size applying 134.33 Rupees One Hundred Sqm
between the RCC and masonry junction in proper line, level and plumb with all Thirty Four And Paise
material, labour, tools, tackles and equipment. Including providing and fixing the jali Thirty Three Only
with nails, etc complete as directed by the site-in-charge.
DTP Maternity Home CHC Singvad 11 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
71 75.00 Meter Providing laying and jointing in true line and level U.P.V.C. Pipe (SCH-40) including 72.65 Rupees Seventy Two Meter
fitting make or equivalent as approved by Engineer In charge. Pipe shall be fixed on And Paise Sixty Five
the wall with the help of clamp at everytwo meter C/C or shall be concealed as Only
directed including necessary fitting etc. including testing of pipe and joints and fixing
the same with adhesive solvent, including cost of all materials. (i) 15mm dia.
72 120.00 Meter Providing laying and jointing in true line and level U.P.V.C. Pipe (SCH-40) including 91.84 Rupees Ninety One And Meter
fitting make or equivalent as approved by Engineer In charge. Pipe shall be fixed on Paise Eighty Four Only
the wall with the help of clamp at everytwo meter C/C or shall be concealed as
directed including necessary fitting etc. including testing of pipe and joints and fixing
the same with adhesive solvent, including cost of all materials. (ii) 25mm dia.
73 90.00 Meter Providing laying and jointing in true line and level U.P.V.C. Pipe (SCH-40) including 148.12 Rupees One Hundred Meter
fitting of PRINCE/SUPREME/ASTRAL/FINOLEX or equivalent make or as approved Forty Eight And Paise
by Engineer In charge. Pipe shall be fixed on the wall with the help of clamp at Twelve Only
everytwo meter C/C or shall be concealed as directed including necessary fitting etc.
including testing of pipe and joints and fixing the same with adhesive solvent,
including cost of all materials. (i) 40mm dia.
74 80.00 Meter Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) 170.36 Rupees One Hundred Meter
PIPE having National Sanitation Foundation (NSF) seal for potable water of following Seventy And Paise Thirty
dia. nominal bore tube fittings and clamps including making good the wall, ceiling and Six Only
floor etc. complete.[A] 15 mm.
75 30.00 Each Providing and fixing 15 mm dia brass chromium plated screw down bib taps. 186.83 Rupees One Hundred Each
Eighty Six And Paise
Eighty Three Only
76 10.00 Each Providing & Fixing Sergical Bib cock of FLR-5043N of jaquar or Equivalent as directed 2376.53 Rupees Two Thousand Each
and complete. Three Hundred Seventy
Six And Paise Fifty
77 10.00 Each Providing & Fixing C.P. Brass angle valve 15mm etc. complete. 509.04 Rupees Five Hundred Each
Nine And Paise Four
78 9.00 Each Providing and fixing brass Cromiam Plated brass half trun Flush cock of approved 263.77 Rupees Two Hundred Each
quality including fixing in pipe line etc Complete. 25mm dia. Sixty Three And Paise
Seventy Seven Only
DTP Maternity Home CHC Singvad 12 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
79 4.00 Each Providing & fixing gun metal check or non-return full way wheel valve (A)15 mm dia. 186.83 Rupees One Hundred Each
Eighty Six And Paise
Eighty Three Only
80 5.00 Each Providing & fixing gun metal check or non-return full way wheel valve (C)25 mm dia 420.63 Rupees Four Hundred Each
Twenty And Paise Sixty
81 2.00 Each Providing & fixing gun metal check or non-return full way wheel valve (E) 40 mm dia 663.43 Rupees Six Hundred Each
Sixty Three And Paise
Forty Three Only
82 20.00 Each Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass with 859.41 Rupees Eight Hundred Each
mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with Fifty Nine And Paise
C.P brass screws and washers. Forty One Only
83 20.00 Each Providing & fixing C.P. Brass towel rails complete with C.P. brass brackets fixed to 616.42 Rupees Six Hundred Each
wooden plugs with C.P. brass screws (B) 600 mm x 20 mm size Sixteen And Paise Forty
84 4000.00 Liter Supplying and Installing 3 layer PVC water tank (ISI) of required capacity each with all 12.78 Rupees Twelve And Liter
necessary fittings and connection etc. complete on terrace. Paise Seventy Eight
85 90.00 Meter Drilling of 215 mm dia. Bore in over burden strata (0-30) including lowering and fixing 330.27 Rupees Three Hundred Meter
of 175 mm nominal dia UPVC pipe/175 mm dia ERW pipe upto required depth and Thirty And Paise Twenty
further drilling of 165mm dia bore hole in rocky strata by DTH rig. Seven Only
86 24.00 Meter Manufacture, supply and delivery of ISI marked (IS-12818) with latest amendment. 915.06 Rupees Nine Hundred Meter
c) 175 mm nominal dia. "CS" type Fifteen And Paise Six
87 1.00 SET Single phase borewell submersible pump motor set 23175.46 Rupees Twenty Three SET
MOC: Casing: CI-FG260, Impeller: Bronze & Shaft: SS:410 Thousand One Hundred
Category Q-1.2, 20 LPM Discharge, 90 m Head, 1.5 HP Seventy Five And Paise
DTP Maternity Home CHC Singvad 13 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
88 120.00 Meter Manufacture, supply and delivery of following ISI marked HDPE pipes (IS:4984/1985 55.55 Rupees Fifty Five And Meter
with latest amendment) having material Grade PE-80 in approximate 100 meter coil Paise Fifty Five Only
length or as per GWSSB requirement with SS- 316 nipple at both ends having 11 TPI
threads as per specifications, press fitted and bolted having nominal diameter as
under as per detailed technical specifications. DN 40 mm PN-10
89 150.00 Meter PVC insulated flat submersible cable as per detailed technical specifications of R/C of 124.23 Rupees One Hundred Meter
GWSSB conforming to IS 694, IEC 60227 / 60228. 1 R x 3 C x 2.5 mm2 Twenty Four And Paise
Twenty Three Only
90 1.00 Job Lifting or Lowering of single phase submersible pump set complete with required 1010.00 Rupees One Thousand Job
length of HDPE pipe & cable in bore well and fitting of control panel board including Ten Only
wiring work and satisfactory testing as per instruction of Engineer-in-charge including
carting of material to site. Up to 90 meter depth
91 4.96 Cum Honey Comb Brickwork With Common Burnt Clay Building Bricks Having Crushing 2582.57 Rupees Two Thousand Cum
Strength Not less than 35 Kg / Sqmt (i) In Cement Mortar 1:6 (1 Cement 6 Coarse Five Hundred Eighty
Sand ) etc. Complete . Two And Paise Fifty
92 5.40 Smt (i) Half brick masonry in common brunt clay building bricks having crushing strength 590.01 Rupees Five Hundred Smt
not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in Ninety And Paise One
foundation and plinth (B) Conventional (upto 10 ton) Only
93 80.00 Rmt Providing and fixing to wall, ceiling and floor 10.0 Kg f/cm2 working pressure 280.23 Rupees Two Hundred Rmt
polythelene pipes of the following outside dia. high density, complete with special Eighty And Paise Twenty
flange compression type fittings wall clamps etc. including making good the wall, Three Only
ceiling and floor 75mm
94 120.00 Rmt Providing and fixing to wall, ceiling and floor 10.0 Kg f/cm2 working pressure 339.05 Rupees Three Hundred Rmt
polythelene pipes of the following outside dia. high density, complete with special Thirty Nine And Paise
flange compression type fittings wall clamps etc. including making good the wall, Five Only
ceiling and floor 110MM
95 36.00 Rmt Provdg. & fixing on wall face PVC rain water pipe of FINOLEX, SUPREME, KISHAN 501.51 Rupees Five Hundred Rmt
or PRINCE brand is used incl. filling the joints with spun yarn soaked in neat cement One And Paise Fifty One
slurry and cement mortar 1:2 (1 cement : 2 fine sand) . PVC pipe 6 Kg/Sqcm. (ii) 110 Only
DTP Maternity Home CHC Singvad 14 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
96 30.00 Each Providing and fixing PVC SWR Nahni Trap IS 14735 for drain with jali of the following 600.23 Rupees Six Hundred Each
nominal diameter of self cleansing design with C.I. Scread down or hinged grating And Paise Twenty Three
including the cost of cutting and making good the walls. (i) 100 mm dia Only
97 4.00 Each Providing & Fixing white or coloured glazed China Veterious China Orissa Pattern 1493.32 Rupees One Thousand Each
water closet squatting pan size 580 mm. x 440 mm. including providing and fixing Four Hundred Ninety
vetrious china 100 mm. size S or P trap including jointing the trap with pan and soil Three And Paise Thirty
pipe in C.M. 1:1 including all fitting and fixtures. Two Only
DTP Maternity Home CHC Singvad 15 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
98 14.00 Each Providing and fixing wash down wall hung water closet (European type) of jaquar or 2332.90 Rupees Two Thousand Each
equivalent with integral 'P' trap jointed within C.I pipe in C:M 1:1 including matching Three Hundred Thirty
seat cover, chair braket, Conceled metropole of jaquar or equivalent, 2 way bibcock of Two And Paise Ninety
jaquar or equivalent, health foucet of jaquar or equivalent with 1 m extension pipe, Only
toilet paper holder of jaquar or equivalent with all accessories etc. complete.
99 4.00 Each provdg. & Fixing urinal of approved quality incl. connection with trap and with integral 1770.05 Rupees One Thousand Each
longitudinal flush pipe. (A) Squating plate pattern white earthenware 550mm x Seven Hundred Seventy
300mm. And Paise Five Only
100 17.00 Each Providing and fixing Veterious China flat back wash basin with single hole for pillar 2164.41 Rupees Two Thousand Each
trap with CI or MS brackets painted with including cutting holes and making good the One Hundred Sixty Four
same including all necessary fittings in white colour.including pillar trap15mm Dia & And Paise Forty One
Waste Pipe 32mm Dia Only
101 8.00 Each Providing and fixing ( 600 X 450 X 150 mm) size vitreous china laboratory sink with CI 2490.47 Rupees Two Thousand Each
or MS brackets painted white including cutting holes in wall and making good the Four Hundred Ninety
same 40 mm dia CP waste couplin rails etc. complete. And Paise Forty Seven
102 8.00 Each Providing and fixing in position PVC Cowel vent to pipes (ii) 75 mm. dia 154.24 Rupees One Hundred Each
Fifty Four And Paise
Twenty Four Only
103 8.00 Each Providing and fixing in position PVC Cowel vent to pipes (ii) 110 mm. dia 180.77 Rupees One Hundred Each
Eighty And Paise
Seventy Seven Only
104 20.00 Each Const. of brick masonary chamber for under ground inspection chambers & bends 2932.93 Rupees Two Thousand Each
with brick having crushing strength not less than 35 Kg. / cm² in C.M. 1:5 precast Nine Hundred Thirty Two
S.F.R.C top cover foundation concrete 1:5:10 in side plaster 15 mm thick with C.M. And Paise Ninety Three
1:3 finished smooth with floating coat of neat cement on walls & bed concrete, inside Only
dimension 455x 610 mm and 450 mm deep for single pipe line.
DTP Maternity Home CHC Singvad 16 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
105 37.28 Cum. Providing And Layling Vaccume Dewatering Process Ordinary cement Concrete M- 6432.21 Rupees Six Thousand Cum.
200 & Curing Comp. Including Compaction and Finishing of Cement Concrete Road Four Hundred Thirty Two
by Trimix process excluding rainforcement and Including all Material and labour And Paise Twenty One
chrages for trimix (Vaccum dewatering Services) Process on Cemnt Concrete road Only
Surface by using Vaccume dewatering pump,floater surface vibrator incl.making
groove 5 mm width and filling with polyminte polymer and rough finish to surface per
instruction incl.levelling etc complete.
106 551.24 Sqm. Providing and fixing pre-cast Rubber Dye inter locking concrete block 60mm thick with 702.02 Rupees Seven Hundred Sqm.
grade of concrete M200 pnumatic compressed by mechanically pressed and as per Two And Paise Two
approved design including 75mm Sand layer for levelling and filling the joint with Only
sand in proper line and level etc complete.
ELECTRIFICATION WORK
107 120.00 Pt. Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both 582.77 Rupees Five Hundred Pt.
are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to Eighty Two And Paisa
10 mtr length , in below type of pipe erected with 6A Modular type switch / bell push & Seventy Seven Only
accessories and earth continuity of following type, erected on PVC / Metallic/Wooden
box, single mounting base frame covered with textured/metallic/white front plate
modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp
holder/ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe
and accessories erected concealed in wall/ceiling complete Cat. III
108 60.00 Pt. Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of 810.02 Rupees Eight Hundred Pt.
.ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr Ten And Paisa Two Only
length, in below type of pipe erected with 6A Modular type switch and hum free EME
step type electronic fan regulator mounted and accessories with earth continuity of
following type erected on PVC / Metallic/Wooden box, single mounting base frame
covered with textured/metallic/white front plate modules erected on / in wall / ceiling
as per pipe erected. with necessary ceiling rose / H.D.Connector as directed. (f) with
medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling
complete Cat-III
DTP Maternity Home CHC Singvad 17 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
109 20.00 Pt. Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI 612.06 Rupees Six Hundred Pt.
marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr Twelve And Paisa Six
length, in below type of pipe erected complete with Modular type switch & 5 pin Plug Only
erected on PVC / Metallic/Wooden box covered with appropriate front plate modules
erected on / in wall / ceiling as per pipe erected with following type of accessories. [I]
For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb
(f) with medium class Rigid PVC pipe and accessories erected concealed in
wall/ceiling completeCat-III
110 60.00 Pt. Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket 309.06 Rupees Three Hundred Pt.
erected on PVC / Metallic/Wooden box, single mounting base frame covered with Nine And Paisa Six Only
textured / metallic/white front plate modules erected on / in wall / ceiling with
following type accessories. Cat.III
metallic/Wooden box, single mounting base frame covered with textured /
metallic/white front plate , modules erected with necessary connections as per site
situation directed by Engineer In charge.
112 40.00 Nos (9) 16 Amp. SP one way switch Cat.III 180.79 Rupees One Hundred Nos
Eighty And Paisa
Seventy Nine Only
113 40.00 Pt. (10) 6/16Amp. Universal socket Cat.III 199.98 Rupees One Hundred Pt.
Ninety Nine And Paisa
Ninety Eight Only
114 3.00 Pt. (4) TV Co-axial Socket outlet Cat-III 160.59 Rupees One Hundred Pt.
Sixty And Paisa Fifty
115 30.00 Nos (7) Blank Plate Single Cat-III 25.25 Rupees Twenty Five And Nos
Paisa Twenty Five Only
116 10.00 Nos (8) Computer RJ-45 Cat-III 160.59 Rupees One Hundred Nos
Sixty And Paisa Fifty
117 6.00 Nos (19) Modular Indicating Call Bell Cat.III 329.26 Rupees Three Hundred Nos
Twenty Nine And Paisa
Twenty Six Only
DTP Maternity Home CHC Singvad 18 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
118 400.00 EA Conduits & Pipes 24.24 Rupees Twenty Four EA
Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size And Paisa Twenty Four
complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Only
Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in
approved manner as directed
119 350.00 Mtr. b) 25 mm 33.33 Rupees Thirty Three And Mtr.
Paisa Thirty Three Only
120 50.00 Mtr. Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, 17.17 Rupees Seventeen And Mtr.
PVC bushes, Check-nuts etc. complete of following sizes. Paisa Seventeen Only
121 50.00 Mtr. (3) 25 mm 21.21 Rupees Twenty One And Mtr.
Paisa Twenty One Only
122 50.00 Mtr. Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double- 31.31 Rupees Thirty One And Mtr.
locking arrangement with grooves, trunking of size not below 12.5 mm in height as per Paisa Thirty One Only
IS with accessories of PVC/Resin polypropylene not below 1.8 mm thick duly sealed
in joint & erected on wall / ceiling of following size .
123 50.00 Mtr. Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, 188.87 Rupees One Hundred Mtr.
chloride rigid material with ignition free and flame proof confirming BS with necessary Eighty Eight And Paisa
end caps Internal and external bend, flat bends, coupler, tee etc..All necessary Eighty Seven Only
accessories and measuring of following sizes
(3) 50 mm x 50 mm trunking
124 50.00 Mtr. (1) 75 mm x 50 mm trunking 277.75 Rupees Two Hundred Mtr.
Seventy Seven And
Paisa Seventy Five Only
125 545.00 Mtr. Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 104.03 Rupees One Hundred Mtr.
stranded Copper conductor wire in following type of pipe to be erected concealed in Four And Paisa Three
/flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated Only
stranded wire of green colour for earth continuity of following size
(a) with medium class Rigid PVC pipe and accessories
(b) 2 wire 2.5 sq. mm
DTP Maternity Home CHC Singvad 19 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
126 300.00 Mtr. Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor 140.39 Rupees One Hundred Mtr.
wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper Forty And Paisa Thirty
conductor FRLS PVC insulated stranded wire of green colour for earth continuity of Nine Only
(A) with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm
127 50.00 Mtr. Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor 531.26 Rupees Five Hundred Mtr.
wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper Thirty One And Paisa
conductor FRLS PVC insulated stranded wire of green colour for earth continuity of Twenty Six Only
(A) with medium class Rigid PVC pipe and accessories (i) 4 wire 10 sq. mm (use
earth wire of 4 sq.mm )
128 50.00 Mtr. Providing & Erecting approved make following size of TV Co-axial flexible cable 39.39 Rupees Thirty Nine And Mtr.
comprising inner conductor of solid bare copper insulated with Foam PE & Secondary Paisa Thirty Nine Only
conductor made of poly - Aluminium film bonded Al. Braids @ suitable coverage
overall sheathed with black PVC insulation. a) RG -6
129 30.00 Mtr. Providing & erecting Switch board for Computer or electric apparatus consisting of 1133.22 Rupees One Hundred Mtr.
following modular type accessories mounted with PVC / Metallic concealed/open box Thirty Three And Paisa
with single mounting base frame covered with textured/metallic /white front Twenty Two Only
plate,modules erected with necessary connections as directed
1 no. 6A/16A universal plug-switch combined.
3 nos. 6A Switch 3 nos. 6A 5 pin Plug
For Modular Type Accessories cat iii
130 400.00 Mtr. Supplying & erecting approved make LAN cable of following size in existing pipe as 47.47 Rupees Forty Seven And Mtr.
per direction [C] CAT - 6 Paisa Forty Seven Only
131 1.00 Pt. Providing & erecting main Distribution (MDF) indoor type, back mounted frame (a) 994.85 Rupees Nine Hundred Pt.
Suitable for 10 pair Ninety Four And Paisa
Eighty Five Only
132 100.00 Mtr. ARMOURED ALLUMINIUM CABLES. 588.83 Rupees Five Hundred Mtr.
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium Eighty Eight And Paisa
conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / Eighty Three Only
pipe of following size of cables (E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core)
133 100.00 Nos Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand 229.27 Rupees Two Hundred Nos
Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in Twenty Nine And Paisa
existing trench / pipe of following size of cables (B) 4 core 25 Sq. mm Twenty Seven Only
DTP Maternity Home CHC Singvad 20 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
134 200.00 Mtr. Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand 168.67 Rupees One Hundred Mtr.
Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in Sixty Eight And Paisa
existing trench / pipe of following size of cables (C) 4 Core 10 Sq.mm. Sixty Seven Only
135 401.00 Mtr. (B) 4 core 6 Sq. mm 151.50 Rupees One Hundred Mtr.
Fifty One And Paisa Fifty
136 169.00 Mtr. Making trench in soft soil of suitable width of 90 cms deep for laying cable or locating 55.55 Rupees Fifty Five And Mtr.
the fault all over the run and back filling the same and making the surface as a normal Paisa Fifty Five Only
137 80.00 Mtr. Providing & laying approved make Double walled corrugated pipes (DWC) of 137.36 Rupees One Hundred Mtr.
polyethylene(conforming to IS 14930 II )with necessary connecting accessories of Thirty Seven And Paisa
same material at required depth in existing trench for laying of cable. below ground / Thirty Six Only
road surface for enclosing cable (D)120 mm outer dia.
138 10.00 Mtr. CABLE GLANDS. 38.38 Rupees Thirty Eight And Mtr.
Providing and, fixing heavy duty flange type brass cable gland with rubber ring for Paisa Thirty Eight Only
PVC insulated armoured cable complete with out going tails, insulating tape etc for
following size of cables.
(C) 2 to 4 core 10 Sq. mm
139 12.00 Mtr. (B) 2 to 4 core 6 Sq. mm 38.38 Rupees Thirty Eight And Mtr.
Paisa Thirty Eight Only
140 4.00 Nos (E) 2 to 4 core 25 Sq. mm 51.51 Rupees Fifty One And Nos
Paisa Fifty One Only
141 8.00 Nos Providing and, fixing heavy duty flange type brass cable gland with rubber ring for 131.30 Rupees One Hundred Nos
PVC insulated armoured cable complete with out going tails, insulating tape etc for Thirty One And Paisa
following size of cables. Thirty Only
(D) 3 & 1/2 core 95 Sq. mm
142 40.00 Nos CABLE LUGS. 13.13 Rupees Thirteen And Nos
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of Paisa Thirteen Only
following size evenly crimped with high pressure tool & connected to switchgear
terminals with brass/cadmium plated nut bolts in an approved manner.
143 47.00 Nos (A) 1.5/ 2.5/4/6 Sq.mm 6.06 Rupees Six And Paisa Nos
DTP Maternity Home CHC Singvad 21 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
144 16.00 Nos (C) 16/25 Sq.mm. 15.15 Rupees Fifteen And Nos
Paisa Fifteen Only
145 32.00 Nos (F) 95 Sq.mm. 40.40 Rupees Forty And Paisa Nos
146 85.00 Nos MINIATURE CIRCUIT BREAKERS. 123.22 Rupees One Hundred Nos
Miniature circuit breaker single pole 6A to 32A suitable to operate on 240 V A.C. Twenty Three And Paisa
system and having breaking capacity 10 KA to be erected in existing box. confirming Twenty Two Only
to IS 8828/1996 with ISI Mark
147 6.00 Nos Providing & erecting 240 V MCB double pole switch for motor & inductive load (C 363.60 Rupees Three Hundred Nos
Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having Sixty Three And Paisa
following capacity Sixty Only
(B) 40 Amp. Cat-III
148 6.00 Nos Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) 811.03 Rupees Eight Hundred Nos
having 10KA breaking capacity & confirms to IS :8828 in existing box having following Eleven And Paisa Three
(c)63 Amp. Cat.III
149 6.00 Nos Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having 701.95 Rupees Seven Hundred Nos
10KA breaking capacity & confirms to IS :8828 in existing box having following One And Paisa Ninety
capacity Five Only
(b)40 Amp. Cat.III
150 4.00 Nos Providing and erecting Sheet Steel powder coated MCB distribution board - flush / 2445.21 Rupees Twenty Two Nos
surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to Thousand Four Hundred
IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The Forty Five And Paisa
DBs should be used of same company of MCB to be used) Twenty One Only
(B) three phase incoming and single phase horizontal type outgoing Per phase
isolation type (PPI) (b) sheet steel double door (ii)8 way
151 12.00 Nos EARTH LEAKAGE CIRCUIT BREAKERS. 2458.34 Rupees Twenty Two Nos
providing and erecting Approved make RCCBs conforming to IS: 12640 and having Thousand Four Hundred
sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for Fifty Eight And Paisa
operation on single phase 240 V,50Hz. having characteristic of quick action & tripping Thirty Four Only
with all advance feature & do not incorporate any electronic component. for following
Max. rating erected as directed
(ii) 40Amps. DP Cat-III
DTP Maternity Home CHC Singvad 22 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
152 2.00 Nos Providing and erecting metallic vitrified danger notice board as per language 69.69 Rupees Sixty Nine And Nos
suggested by engineer incharge for MEDIUM VOLTAGE installation to be erected as Paisa Sixty Nine Only
153 7.00 Nos Providing and erecting Approved make Four pole moulded case circuit breaker having 6790.23 Rupees Sixty Six Nos
breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to Thousand Seven
100A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. Hundred Ninety And
with all internal connections, spreader tinned copper & complete erected in existing 16 Paisa Twenty Three Only
G.M.S. housing. ICS=100% of ICU only Cat III
154 1.00 Nos Providing and erecting Approved make Four pole moulded case circuit breaker 17843.67 Rupees Seventeen Nos
having breaking capacity ICU of 35 KA. at 415 V. having Normal current rating Thousand Eight Hundred
200A.with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. Forty Three And Paisa
with all internal connections, spreader tinned copper & complete erected in existing 16 Sixty Seven Only
G.M.S.housing ICS=100% of ICU only Cat III
155 2.00 Ea. Providing and erecting Approved make Four pole moulded case circuit breaker having 8861.74 Rupees Eighty Eight Ea.
breaking capacity ICU of 35 KA. at 415 V. having normal current rating 125A. with Thousand Eight Hundred
Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all Sixty One And Paisa
internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. Seventy Four Only
housing. housing. ICS=100% of ICU only Cat III
156 2.00 Nos Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper 3202.71 Rupees Thirty Three Nos
Busbars with four equal Nos. of electrolyte bus having current density not more than Thousand Two Hundred
1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour Two And Paisa Seventy
insulating tape for phase sequence of following current carrying capacity, erected with One Only
necessary bus bar supports /insulators, main cable socket to each bar, erected in
existing cubical panel with necessary connections. (B) Suitable for 200 Amp. capacity
157 1.00 Rn.Mtr Supply of Approved make Iron Clad or metal clad four pole change over switch 415V. 12240.19 Rupees Twelve Rn.Mtr
confirming to IS of following capacity Thousand Two Hundred
(B) 100 A / 125 A Forty And Paisa
DTP Maternity Home CHC Singvad 23 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
158 2.00 Ea. Providing & erecting weather proof, dust & vermin proof, floor mounted front operated 14902.55 Rupees Fourteen Ea.
indoor type cubical panel board having IP-64 protection made from 14 SWG thick Thousand Nine Hundred
CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal Two And Paisa Fifty Five
partitions with necessary supporting angles, flats including cutting, bending, drilling, Only
welding, riveting with internal partitions & cable alley as per requirements & instruction
of engineer-in-charge with erection of supplied switch gears, BUSBARS, with suitable
size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets,
rib, bakelite control fuses for measuring instruments, earth bus & earth bolts,
foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with
locking arrangement and rubber gasket complete. The Panel shall be painted with
epoxy powder coating. (The rates excludes the cost of switchgears, bus bars, inter
connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension
shall be measured excluding base beams) The panel shall be supplied with following
approved manufacturers with following size.(B) The standard companies switch gear
shall be used and only manufacturers at CPRI approved factory (i) with 350mm depth
159 10.00 Sq. Mtr Supplying and erecting approved make suitable panel indicator LED type lamp, lens 43.43 Rupees Forty Three And Sq.
cover, complete erected with necessary connections. Paisa Forty Three Only Mtr
160 6.00 Nos providng and erecting Suitable set of CTS for 100A Energy Meter 2105.85 Rupees Twenty Two Nos
Thousand One Hundred
Five And Paisa Eighty
161 1.00 Each Supplying and erecting approved make panel mounting type Digital Voltmeter having 1275.63 Rupees Two Hundred Each
3 digits LED display, 0 to 750 AC Volts range erected on existing panel board with all Seventy Five And Paisa
connection, wiring etc .with manufacturers calibration certificate. Sixty Three Only
162 1.00 Ea. Supplying and erecting approved make panel mounting type Digital Ammeter having 1558.43 Rupees Five Hundred Ea.
3 digits LED display, external CT operated, calibrated for 0 to 1000 Amps suitable to Fifty Eight And Paisa
operate on 500 Volt AC , erected on existing panel board with all connection, wiring Forty Three Only
etc .with manufacturers calibration certificate.
163 3.00 Ea. Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC Supply 317.14 Rupees Three Hundred Ea.
500 V on existing panel board with necessary connections. Seventeen And Paisa
DTP Maternity Home CHC Singvad 24 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
164 55.00 Ea. Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper 115.14 Rupees One Hundred Ea.
conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in Fifteen And Paisa
existing pipe of following size (Specifically for control panel, relays, power Fourteen Only
switchgears, motor starters & control wiring) with required size of copper lugs, nuts
and bolts if required.(f) One wire 10.00 sq. mm
165 45.00 0.00 (g) One wire 16.00 sq. mm 177.76 Rupees One Hundred 0.00
Seventy Seven And
Paisa Seventy Six Only
166 35.00 Mtr. (h) One wire 25.00 sq. mm 295.93 Rupees Two Hundred Mtr.
Ninety Five And Paisa
Ninety Three Only
167 60.00 Mtr. CEILING FANS AND ACCESSORIS. 1948.29 Rupees Nine Hundred Mtr.
Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double Forty Eight And Paisa
ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete Twenty Nine Only
having 3blades with aluminium blades with , canopy & 30 cm. down rod erected with
earthing.(Make shall be approved by Engineer in charge))
168 15.00 Mtr. Supplying & erecting approved make low noise decorative exhaust fan having square 1703.87 Rupees Seven Hundred Mtr.
frame ABS body with inbuilt lowers & square frame.250mm with 1350 RPM Cat.II Three And Paisa Eighty
169 2.00 Kg. Supplying & erecting single phase approved make industrial exhaust fan suitable for 2054.34 Rupees Twenty Two Kg.
medium duty ring mounted low noise operation suitable for medium duty having Thousand Fifty Four And
following dia size and maximum speed in RPM [A] 305 mm dia 900 RPM Cat II Paisa Thirty Four Only
170 60.00 Kg. Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt 373.70 Rupees Three Hundred Kg.
assembled on single MCPCB, with housing used as a heat sink shall be made of Seventy Three And
thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. Paisa Seventy Only
& corrosion resistance with diffuser and/or Polycarbonate optics with company
mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %,CCT 4000 K to
6500K, Uniformity ratio >0.7, Luminaire efficiency> 85 lumens/watt , LED driver
efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA /
SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79
& LM-80 Certificates) (A) Tube Light with integral/ non-integral driver (iv) 22-24 Watts,
Surge - 4KV,IP-20, 4 feet Cat-lll
DTP Maternity Home CHC Singvad 25 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
171 40.00 Sq.Mtr Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt 589.84 Rupees Five Hundred Sq.Mtr
assembled on single MCPCB, with housing used as a heat sink shall be made of Eighty Nine And Paisa
thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. Eighty Four Only
& corrosion resistance with diffuser and/or Polycarbonate optics with company
mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %,CCT 4000 K to
6500K, Uniformity ratio >0.7, Luminaire efficiency> 85 lumens/watt, LED driver
efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA /
SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79
& LM-80 Certificates)Square/ Circular Surface/Recessed Mounted Downlight/Hanging
with provision for spring loaded mounting clips complete.(iii) 16-20 watts, Surge-2 KV,
Surge-4 KV Cat III
172 20.00 Nos Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt 1794.77 Rupees Seven Hundred Nos
assembled on single MCPCB, with housing used as a heat sink shall be made of Ninety Four And Paisa
thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. Seventy Seven Only
& corrosion resistance with diffuser and/or Polycarbonate optics with company
mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %, CCT 4000 K to
6500K, Uniformity ratio >0.7, Luminaire efficiency> 85 lumens/watt, LED driver
efficiency > 85 %CREE / OSRAM / PHILIPS Lumileds / NICHIA /
SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79
& LM-80 Certificates)(B) LED Panel Light with provision for Plane front frame with
translucent cover fixed to housing complete.IP20 (vi) 36 watts, 24" x 24", Surge- 2KV,
DTP Maternity Home CHC Singvad 26 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
173 6.00 Mtr. Supplying & erecting earth pit of minimum bore dia.150mm size approved make 4591.46 Rupees Forty Four Mtr.
Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of Thousand Five Hundred
corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Ninety One And Paisa
Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, Forty Six Only
connection terminal dia of 12mm with constant ohmic value surrounded by highly
conductive compound with high charge dissipation suitable for following type of
applications with chamber and heavy duty cover. (A)(approved make OEM has to
submit test certificate including value of earth resistance of installation duly stamped
and signed by agency and officer Incharge has to ensure the value of earthing
resistane mentioned in test Certificate) & having back filling compound of (B) Inner
chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-
2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill
Compound :- Earthing compound should be capable to retain moisture for long time
Necessary test report must be submitted by Agency. (a) For Electrical Installation up
to 440V in normal soil
Length of pipe - 1 Mtr
Back filling compound - 1 Nos Bag of 15 Kg.
174 60.00 Nos Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 794.87 Rupees Seven Hundred Nos
Ninety Four And Paisa
Eighty Seven Only
175 2.00 Nos Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity 61482.74 Rupees Sixty One Nos
150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the water should Thousand Four Hundred
drop by 15˚C within a hour, The water cooler should be comprising of hermetically Eighty Two And Paisa
sealed compressor, fan motor, condensing unit, water tank surrounded by Seventy Four Only
evaporating, coil, thermostats, relay etc.complete with necessary inlet & outlet
connection. The body of water cooler will be made from Stainless Steel.
176 2.00 Nos Supplying & erecting 5 stage single reverse osmosis water purification system with 29187.99 Rupees Twenty Nine Nos
M.S. powder coated frame, prefilter housing with 'O' ring presediment filter GAC filter, Thousand One Hundred
carbon filter suitable buster DC pump capacity 80 psi, mention with 40 psi inline type Eighty Seven And Paisa
post carbon filter auto low & high pressure switches with following size of storage tank Ninety Nine Only
& LPH capacity & erected as directed [C] 50 Ltr / Hr with 150 psi 2 nos booster pump
DTP Maternity Home CHC Singvad 27 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
177 6.00 Nos Supplying & erecting Galvanized M.S pipe post “B” class 88.9 mm O.D 6 mtr. Long 4440.97 Rupees Forty Four Nos
duly painted with two coats of aluminium paint complete with metallic base- plate of Thousand Four Hundred
300 mm x 300 mm x 4mm thick for using as a compound light pole with approx. Forty And Paisa Ninety
weight 47 Kg. Seven Only
178 6.00 Nos Providing and erecting Street Light pole bracket comprising main B Class MS pipe of 626.20 Rupees Six Hundred Nos
4.2 cm/require outside dia. complete with suitable B Class M.S. sleeve tubing of Twenty Six And Paisa
approx. 45cms.length and suitable for 76.5 mm /80mm / required size of pole top Twenty Only
having sufficient fasteners for fixing the brackets and having spread of 1.5.mtr. length
with 110 deg.with vertical plane & suitable welded stays, reducer and with check nuts
complete painted with one coat of Red oxide / PU base primer and two coats of
Aluminium / PU paint. paint with following nos of arms.[A] Single Arm Bracket 1.5 Mtr
179 6.00 Nos Providing M-20 / 1:2:4 cement concrete foundation & 70 % PCC from bottom including 809.01 Rupees Eight Hundred Nos
excavation for the pole of size 45 x 45 x 100 cms. Deep in below ground level with Nine And Paisa One
plinth of 45 cms x 45 cms (or 45 cms dia x 45 cms) high upper ground level with Only
necessary curing and finishing in approved manner.
( for 4 & 6 mtr pole)
180 12.00 Nos Supplying & erecting approved make SMC press moulded composite FRP. loop-in, 515.10 Rupees Five Hundred Nos
loop-out approx. 2mm thick box complete with Bakelite connector strip Fifteen And Paisa Ten
5way(3P+N+E),DIN rail for mounting mob & hinged doors as per requirement having Only
locking arrangements with mounting clamp with nuts, bolts & washers suitable for
erection on pole with cable clamps& earth bolt of following size of box.(B) 250mm x
200mm x 100mm [deep]
DTP Maternity Home CHC Singvad 28 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
181 6.00 Nos Supplying and erecting LED street light / Flood light fittings with High power White 7186.15 Rupees Seventy Seven Nos
LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than Thousand One Hundred
130 lm/w and corrosion free High pressure die cast aluminum housing with smooth Eighty Six And Paisa
finish powder coated and heat sink extruded aluminium with diffuser and Fifteen Only
Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to
300 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K, Uniformity
ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.CREE
/ OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED used
for luminaire. ( fittings required LM-79 & LM-80 certificates)(NOTE: Below description
have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may
select any wattage capacity between the ranges shown.)
(B) Flood Light (IP-65), Surge -4KV,Light must have 440VAC line supply protection. It
should withstand 48 hours for 440VAC line supply (v) 120 - 159 watts Cat III
182 6.00 Nos Supplying and erecting LED street light / Flood light fittings with High power White 4248.06 Rupees Forty Four Nos
LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than Thousand Two Hundred
130 lm/w and corrosion free High pressure die cast aluminum housing with smooth Forty Eight And Paisa
finish powder coated and heat sink extruded aluminium with diffuser and Six Only
Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to
300 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K, Uniformity
ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.CREE
/ OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED used
for luminaire. ( fittings required LM-79 & LM-80 certificates)(NOTE: Below description
have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may
select any wattage capacity between the ranges shown.)
(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC
line supply with over-voltage protection.
(ii) 48 - 59 Watts CAT III
DTP Maternity Home CHC Singvad 29 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
183 1.00 Nos Supplying & erecting approved make Digital time switch having lithium cell 6 years 3168.37 Rupees Thirty Three Nos
operative and operate battery backup 1 channel day clock with 14 memory Thousand One Hundred
programme, suitable to operate on 240V + 5%, 16A with, floating contacts Minimum Sixty Eight And Paisa
switching setup time 1 minimum & LCD display. Also comprised permanent ON/OFF Thirty Seven Only
switching. Programming switches & housed in fire proof thermoplastic enclosure &
transparent cover erected as required with necessary connection erected as directed.
184 6.00 Ea. Supply, Installation, Testing and Comissioning of 4MP Fixed Lens Dome Type 8530.08 Rupees Eighty Eight Ea.
Camera, H.265 4MP IR Vandal Proof Dome N/W Camera, 2.8mm/3.6mm, 30M Thousand Five Hundred
IR, Micro SD, DC12V/PoE, IP67/IK10, Basic IVA, 1 / 2.7" CMOS, 2560 × Thirty And Paisa Seven
1440, 0.01 Lux, F1.2, AGC ON; Defog, True day/night, Digital WDR, 3D Only
DNR, HLC & BLC, Triple streams, Smart codec by ROI, Cyber Security, Basic
intelligent video analytics, NDAA Compliance, UL, CE, FCC Certified
(Including Five year free maintenance with guarantee)
185 2.00 Ea. Supply, Installation, Testing and Comissioning of 4MP Fixed Lens Bullet Type 8530.08 Rupees Eighty Eight Ea.
Camera, H.265 4MP IR Bullet N/W Camera, 3.6mm / 6mm, 50M, Micro SD, Thousand Five Hundred
DC12V/PoE, IP67/IK10, Basic IVA, 4MP resolution (2560 × 1440), True Thirty And Paisa Seven
day/night, Digital WDR, 3D DNR, HLC & BLC, Triple streams, Smart codec by Only
ROI, Cyber Security Basic intelligent video analytics, NDAA Compliance, UL,
CE, FCC Certified (Including Five year free maintenance with guarantee)
186 1.00 Nos Supply, Installation, Testing and Comissioning of 16 Channel Network Video 21632.24 Rupees Twenty One Nos
Recorder (NVR), 1, RJ-45 10/100/1000 Mbps self- adaptive Ethernet Thousand Six Hundred
interface, Supports H.265+/ H.265/H.264/H.264+ decoding formats, Thirty Two And Paisa
Embedded NVR, 2 HDD Bays, up to 6TB capacity each disk, HDMI, VGA output, 1- Twenty Four Only
ch @ 8 MP / 4- ch @ 1080p, Incoming bandwidth 160Mbps, Outgoing 80 Mbps, CE
FCC, BIS, Operating Temp -10 deg to 55 deg C, 2xUSB 2.0 1USB and
serial Interface (Including Five year free maintenance with guarantee)
187 1.00 Kg. Supply Installation Testing and commissioning of 8 PORT POE SWITCH with 7298.30 Rupees Seventy Seven Kg.
required all necessary accessories to complete th job. MAKE:- Dahua Thousand Two Hundred
Ninety Eight And Paisa
188 1.00 kg Supply Installation Testing and commissioning of 10 TB HARD DISK with min 30 35012.89 Rupees Thirty Five kg
days back up. Thousand Twelve And
MAKE:- SEAGATE Paisa Eighty Nine Only
DTP Maternity Home CHC Singvad 30 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
189 1.00 Ea. Supply, installation, testing and commissioning of 9 U Rack including 73463.68 Rupees Seventy Three Ea.
necessary power mounting and fan arrangements for mounting CCTV equipments Thousand Four Hundred
Sixty Three And Paisa
Sixty Eight Only
190 1.00 Ea. Supply, Installation, testing and commissioning of 49 inch professional display/TV 56880.78 Rupees Fifty Six Ea.
for 16X7 AVSI and digital signage application with full HD resolution /HDMI /DVI /VGA Thousand Eight Hundred
/RS232 /USB /RJ45 /Wifi ready/Built-in speakers, Inbuilt media player (refer to Eighty And Paisa
annexure - 1 for detailed specifications) Seventy Seven Only
191 5.00 Ea. Providing and erecting approved make split air-conditioning unit consisting of copper 49730.38 Rupees Forty Nine Ea.
condensing unit with fan motor, hermetically sealed rotary compressor with Thousand Seven
accessories etc. duly connected separately erected evaporating unit and blower motor Hundred Thirty And
with its accessories by means of extra supplied proper insulated copper tubing,drain Paisa Thirty Eight Only
PVC pipes suitable for ( cost includes powder coated Stand, Eco Friendly green gas
charging, 15A plug top & Remote Control) with necessary core cutting. (2)For ISEER
Range (KWH/KWH)(4.0 to 4.49) (b) for 1.5 ton capacity
192 4.00 Ea. (c) for 2 ton capacity 65222.77 Rupees Sixty Five Ea.
Thousand Two Hundred
Twenty Two And Paisa
Seventy Seven Only
193 90.00 Ea Supplying and erecting insulated pair of soft copper tubing open or concealed 1158.47 Rupees One Hundred Ea
including power and control cable,necessary PVC drain pipes for Split AC machine Fifty Eight And Paisa
up to 4 TR capacity Forty Seven Only
194 2.00 Ea. Supplying and erecting approved make online Un-interruptible Power Supply system 82941.20 Rupees Eighty Two Ea.
comprising flat cum-boost charger with IGBT base rectifier & Inverter & sealed Thousand Nine Hundred
maintenance free SMF batteries. The charger having operating capacity for input 160- Forty One And Paisa
270V AC & inverter having output 230V,50 Hz Ac with 0.8 load power factor with Twenty Only
battery, over/under voltage output with over load & short circuit protection equipment.
The system housed in CRC sheet duly powder coated paint with following power
backup.with MS painted batteries stand, 10% Overload capacity for momentary
load..(C) 3 KVA with 1Hr Backup
DTP Maternity Home CHC Singvad 31 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
195 5.00 ea Supplying and erecting approved make Instantaneous type water heater with 4370.27 Rupees Forty Four ea
3Itr.capacity rust free container housed in ABS plastic body insulated with glass wool / Thousand Three
puff insulation and 3 Kw heating elements,adjustable thermostat 300 C to 850 C with Hundred Seventy And
set to operate at 850 C (+ /-60 C ) auto reset indication lamps, thermal cut-out, safety Paisa Twenty Seven
valve fusible plug etc. Cat III Only
Generating (DG) Set(s) of prime power rating (kVA) as specified, complete as a
packaged system, conforming to CPCB IV+ (or better) emission norms, and
complying with all applicable statutory requirements, codes and standards including
(but not limited to) IS 4722:1968, IS 13364 (Part 2) and BS 5514 (latest
editions/amendments). The DG set shall be suitable for 415 V ±10%, 50 Hz ±5%, 3-
phase, 4-wire operation at 0.8 lagging power factor, 1500 RPM, for tropical conditions,
and shall be capable of delivering 10% overload for one (1) hour after twelve (12)
hours of continuous operation (ISO 8528), unless otherwise stated by the OEM. The
scope shall include complete accessories, interconnections, foundations/anti-vibration
arrangements, exhaust system, acoustic enclosure, earthing (as required),
consumables for first commissioning, and all works necessary to render the
installation fully functional and compliant, as directed by the Engineer-in-Charge (EIC).
Factory testing shall be carried out with fuel and load bank at 0.8 power factor and the
DG set shall be offered for inspection prior to dispatch. The DG set shall be provided
with a durable QR code/label fixed on the enclosure/control panel, linking to a
document repository containing (as a minimum) approved GA drawings, wiring
diagrams, foundation and installation details, OEM catalogues, operating &
maintenance manuals, factory test reports, type test certificates (where applicable),
warranty certificate, geo-tag of manufacturing location, and rating plate data as per
relevant IS/BS/ISO requirements. The OEM/Contractor shall provide a Remote
Monitoring System (RMS) with minimum one (1) year connectivity (SIM/data
plan/server access as applicable), including dashboard access, user ID/password,
and data download facility. RMS shall, at minimum, capture and report: DG status
(Auto/Manual/Off), start/stop events, kW/kVA/kVAR, V/I/Hz, PF, run hours, fuel level,
battery voltage, alarms/trips with time stamp, and GPS/location (where supported). All
licences/subscriptions required for the stated period shall be included in the quoted
DTP Maternity Home CHC Singvad 32 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
Turbocharged, 4-stroke, water-cooled, multi-cylinder diesel engine, suitably rated for
the specified DG set prime rating at site conditions, complete with dynamically
balanced flywheel, heavy-duty engine mounting, and electric starting arrangement.
The engine governing shall be electronic (isochronous/droop as per OEM standard)
and shall comply with ISO 8528/BS 5514 requirements for steady-state speed
regulation. Engine shall be complete with dry type air cleaner with restriction indicator,
lube oil cooler (if required), radiator/cooling package (as applicable), and all
sensors/switches required for protections and annunciation. The engine shall be
capable of 10% overload for one (1) hour after twelve (12) hours continuous operation
and shall be suitable for continuous duty under tropical ambient conditions. The
offered engine model shall be CPCB IV+ compliant and shall be supplied with
complete emission control/after-treatment system (including DEF/urea dosing where
applicable) along with all accessories, tanks, pumps, heaters and controls required for
compliant operation. The supply shall include first fill of lubricating oil, coolant and
consumables required for initial commissioning and testing. All fasteners, couplings,
guards, hoses and standard/recommended accessories required for safe and reliable
operation shall be included and shall be subject to inspection/approval by the EIC.
(B) Engine-Mounted Instrumentation/Control Panel:
Engine-mounted instrument/control panel shall be microprocessor based, with
LCD/LED display, event log and alarm/trip annunciation, complete with all wiring,
harnesses and terminations. Indications/protections shall include (minimum) the
following and any additional protections recommended by the OEM: (i) Start/Stop key
switch and/or push buttons with emergency stop; (ii) Output breaker: suitably rated 4-
pole ACB/MCCB/MCB as applicable, with minimum 25 kA rupturing capacity (or as
per fault level at site, whichever is higher), with shunt trip where required; (iii) Jacket
water/coolant temperature – indication and high temperature alarm/trip; (iv) Lube oil
pressure – indication and low pressure alarm/trip; (v) Lube oil temperature (where
provided) – indication/alarm; (vi) Battery charging indication, battery voltage indication
and charging failure alarm; (vii) Engine speed (RPM) indication and overspeed trip;
DTP Maternity Home CHC Singvad 33 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
Synchronous, brushless alternator of appropriate kVA rating, 415 V, 3-phase, 50 Hz,
1500 RPM, 0.8 lagging PF, continuous duty, dynamically balanced rotor, self-cooled,
self-excited and AVR regulated. Enclosure shall be SPDP, minimum IP23. Insulation
shall be Class H with suitable tropicalization; temperature rise shall be within limits of
the applicable standard. The alternator shall comply with IS 13364 (Part 2), IS
and/or BS 2613 (latest), as applicable. Voltage regulation with AVR shall be within
±1.0% (steady state) or OEM standard whichever is better. The alternator shall be
capable of 10% overload for one (1) hour after twelve (12) hours of continuous
operation. Harmonic distortion shall be suitable for non-linear loads; alternator shall be
equipped with appropriate AVR features (e.g., soft start, UFRO) and shall be suitable
for motor starting duties typical to the installation. Terminals shall be brought out to a
terminal box with adequate space for termination and shall include earthing terminals.
All routine/type test certificates (as applicable) shall be submitted for acceptance.
(D) Base Frame & Foundation: Engine and alternator shall be mounted on a suitably
designed, fabricated MS channel base frame with stiffeners, lifting arrangement and
coupling guard, duly painted/treated for corrosion protection. The set shall be installed
on an adequately designed cement concrete foundation/pedestal with anchor bolts,
pockets, grouting and anti-vibration mounts (AVMs) / spring isolators as per OEM
recommendations and site conditions. Vibration levels shall be within OEM
permissible limits. The contractor shall be responsible for alignment, levelling,
tightening torque and re-check after load trial, complete in all respects.
(E) Fuel Tank: In-built/base fuel tank fabricated from minimum 3 mm thick MS sheet,
duly leak-tested, complete with filling arrangement, vent, drain, cleaning opening, level
indication and isolation valve(s). The capacity shall be adequate for minimum eight (8)
hours continuous operation at full load. Fuel piping between tank and engine shall be
MS ‘C’ class pipes of suitable diameter with compatible flexible connections (where
required), complete with all valves, clamps, supports, unions and fittings. Any
additional safety provisions required by local fire authority/UGVCL/competent authority
(such as double wall/bunding, flame arrestor, etc.) shall be provided within the quoted
DTP Maternity Home CHC Singvad 34 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
12 V / 24 V DC electric starting system (as per OEM design) comprising starter
motor(s), battery charger/alternator charging arrangement, relays, cabling and
terminals, complete with maintenance-free batteries of suitable Ah capacity to ensure
minimum three (3) consecutive cranking attempts. System shall include battery
isolator and indication of charging healthy/failure. All battery interconnections shall be
with crimped lugs, insulated sleeves and proper supports, complete in all respects.
(H) Acoustic and Weatherproof Enclosure: Acoustic enclosure shall be factory-
fabricated, weatherproof and corrosion protected, suitable for outdoor installation, with
minimum IP65 protection (or better) for the enclosure body. Enclosure design shall
provide adequate fresh air intake and hot air discharge for engine radiator and
alternator cooling such that the internal temperature rise remains within OEM limits at
full load. Provision shall be made for safe access/maintenance including lockable
doors, viewing window (where provided), emergency stop access, and cable entry
glands. Noise level of the complete DG set with enclosure shall not exceed 75 dB(A)
measured at 1.0 m distance in free field conditions, in accordance with applicable
CPCB requirements. The enclosure shall comply with CPCB IV+ (or better)
requirements and other applicable local rules/regulations. All louvers, acoustic
infill/insulation, fasteners and sealing arrangements shall be of fire-retardant/industrial
grade as per OEM standard. Any deviation from the specified noise/IP requirements
shall be treated as non-compliance unless explicitly approved by the EIC in writing.
Erection, testing, commissioning and satisfactory performance demonstration shall be
carried out as per site requirements and as directed by the Engineer-in-Charge. The
scope shall include pre-commissioning checks, insulation resistance tests, no-load
and load trials, safety/protection checks, and performance test on load bank (where
directed) with submission of test records. The contractor shall provide initial
consumables including first fill of diesel fuel (minimum up to 80% of fuel tank
capacity), lubricating oil, coolant, etc. required for commissioning and the specified
tests. The bidder/OEM shall provide comprehensive warranty/guarantee for the
complete DG system (engine, alternator, control panels, RMS, enclosure and all
guidelines/notifications and all applicable local rules/regulations prevailing as on the
last date of tender submission applicable local rules/regulations prevailing as on the
last date of tender submission
DTP Maternity Home CHC Singvad 35 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
205 1.00 NOS (K) Continuous rating of 82.5 KVA ,BHP not less than 102 BHP 928258.68 Rupees Ninety Nine NOS
Lakh Twenty Eight
Thousand Two Hundred
Fifty Eight And Paisa
Sixty Eight Only
206 1.00 NOS Providing & erecting approved make ATS panel suitable for following size of 3 phase, 63340.13 Rupees Sixty Three NOS
415 V., 50 Hz, A.C. diesel generating set complete of scope as detailed below: Thousand Three
1) Power module: Motorised Changeover switch with ATS controller, Auxiliary Hundred Forty And
contactor with NO & NC contacts with Automatic Battery Charger, indicating lamps for Paisa Thirteen Only
Generator ON, Mains ON, Load and suitable control terminals and power terminals
with neutral earthing studs.(D) ATS Panel for 75 kVA/82.5 KVA3 phase DG Set
DTP Maternity Home CHC Singvad 36 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
216 10000.00 Ltr. Providing Erecting and Fixing Double coated PVC isi mark water tank of required 8.16 Rupees Eight And Paise Ltr.
capacity each with all naccessary fittings & Connection etc. Sixteen Only
217 15.00 No Making holes up to 50mm dia 300mm long in only RCC chamber by diamond core 377.49 Rupees Three Hundred No
cutting machine of HILTI or Equivalent including disposing the debries etc. completed Seventy Seven And
as directed by E.T.C Paise Forty Nine Only
218 20.00 No Making holes up to 100mm dia 300mm long in only RCC chamber by diamond core 772.40 Rupees Seven Hundred No
cutting machine of HILTI or Equivalent including disposing the debries etc. completed Seventy Two And Paise
as directed by E.T.C Forty Only
219 32.00 Rmt Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH40) 148.12 Rupees One Hundred Rmt
for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or Forty Eight And Paise
equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the Twelve Only
help of clamp at every two metre C/C or shall be concelled as directed including
necessary fittings etc. including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
220 2.00 Each Providing and fixing of Glycerin filed burdon type pressure gauge, 100 mm dial and 0- 3009.30 Rupees Three Thousand Each
14 kg range with calibration certificate. Nine And Paise Thirty
221 3.00 Each Providing , fixing, testing and commissioning of 25 mm ball valve of sizes. 3672.36 Rupees Three Thousand Each
Six Hundred Seventy
Two And Paise Thirty Six
222 1.00 Each Providing & fixing pressure switch assembly with isolation valve suitable for working 8670.85 Rupees Eight Thousand Each
pressure of 10 bar. Cost shall be inclusive of providing any short pieces, nipples, Six Hundred Seventy
elbows etc as required. And Paise Eighty Five
223 2.00 Each Supplying, installing, testing and commissioning of .C.I. Dual Plate Non- return valves 11160.50 Rupees Eleven Each
with required flanges, nuts, G.I bolts and gaskets etc. complete. (PN 16 Rated.). Thousand One Hundred
100 mm dia. Sixty And Paise Fifty
224 4.00 Each Providing and Fixing of hand lever operated butter fly PN: 1.6, with CI body and D.I 8058.79 Rupees Eight Thousand Each
disc and other working parts as per IS: 13095 - 1991. With required accessories like Fifty Eight And Paise
matching flange, packings etc.complete as required. Seventy Nine Only
DTP Maternity Home CHC Singvad 37 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
225 2.00 Each Providing and Fixing of hand lever operated butter fly PN: 1.6, with CI body and D.I 6868.00 Rupees Six Thousand Each
disc and other working parts as per IS: 13095 - 1991. With required accessories like Eight Hundred Sixty
matching flange, packings etc.complete as required. Eight Only
226 50.00 Rmt Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming 2986.15 Rupees Two Thousand Rmt
to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in Nine Hundred Eighty Six
ground including welding, excavation & providing cement concrete blocks as supports, And Paise Fifteen Only
anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench
etc. of following sizes complete as required 100 mm
227 30.00 Rmt 80 mm dia 1903.85 Rupees One Thousand Rmt
Nine Hundred Three And
Paise Eighty Five Only
228 20.00 Rmt 65mm dia 1174.63 Rupees One Thousand Rmt
One Hundred Seventy
Four And Paise Sixty
229 45.00 Rmt 25mm dia 872.64 Rupees Eight Hundred Rmt
Seventy Two And Paise
Sixty Four Only
230 30.00 Rmt 15mm dia 422.18 Rupees Four Hundred Rmt
Twenty Two And Paise
231 60.00 Nos. Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers 488.84 Rupees Four Hundred Nos.
of rating 68 degree centigrade with required accessories : Pendent Sprinkler Eighty Eight And Paise
Eighty Four Only
232 1.00 Nos. Providing and fixing of flange ended 24922.19 Rupees Twenty Four Nos.
Foot Valve PN 16. Thousand Nine Hundred
Twenty Two And Paise
233 450.00 Kg MS Structural supprots fabircated with MS / GI Angles, tubes, pipes etc.as required for 132.61 Rupees One Hundred Kg
the panels, battery & fuel Thirty Two And Paise
tank etc. Sixty One Only
DTP Maternity Home CHC Singvad 38 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
234 4.00 Nos. Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia 7568.94 Rupees Seven Nos.
instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, Thousand Five Hundred
conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as Sixty Eight And Paise
required :(10.1) Single headed Gunmetal Ninety Four Only
235 8.00 Nos. Supplying installing , testing and commissioning of reinforced rubber lined RRL fire 8976.88 Rupees Eight Thousand Nos.
hose of 63mm diameter 15 m length as per IS 636 binded with one set of male and Nine Hundred Seventy
female instantaneous ss coupling Six And Paise Eighty
236 4.00 Nos. Supplying Installing , testing and commissioning of SS branch pipe size of 63mm 3978.39 Rupees Three Thousand Nos.
diameter x 19mm diameter Nine Hundred Seventy
Eight And Paise Thirty
237 4.00 Nos. Providing and fixing Hose Box lockable cabinet, having central opening and 4 mm 9690.95 Rupees Nine Thousand Nos.
thick glazed glass doors (Two nos.); housing 2 no’s x 15 m long fire hose (IS:636 Six Hundred Ninety And
Type A) and one no. of branch pipe; suitably marked on the outside with the letters Paise Ninety Five Only
"FIRE HOSE" including necessary locking arrangement and shall be painted with one
coat of primer and two coats of synthetic enamel paint of approved shade.(Internal)
238 4.00 Nos. Supply, fixing, testing & commissioning of 20 mm bore and 30 meter long hose and 17545.72 Rupees Seventeen Nos.
hose reel suitable for 10 Kg/sqcm operating pressure for first aid fire fighting Thousand Five Hundred
conforming to IS : 884, with 180o full swing drum, fixing brackets, 5 mm dia shut off Forty Five And Paise
Stainless steel nozzle, connecting directly from the riser through 40 mm dia. MS Seventy Two Only
(Class C) pipe with sockets, elbows, nipples, 40x20 mm reducer, 20 dia pipe, 20 mm
dia. hand lever
operated isolating ball valve, etc.
including providing operating
239 2.00 Nos. SITC of 25mm dia Gun Metal Air Vent Valves with 25 mm dia. Ball valve and other 2376.83 Rupees Two Thousand Nos.
required accessories like nipple, socket etc Three Hundred Seventy
Six And Paise Eighty
240 175.00 Rmt Apply of Painting for aboveground lines with two coats of enamel paint (As per the 117.14 Rupees One Hundred Rmt
IS:5,Sr No: 80,ISC no-537) over one coats of Red oxide primer for above ground pipe Seventeen And Paise
line network. Fourteen Only
DTP Maternity Home CHC Singvad 39 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
241 1.00 Nos. Providing & fixing of fire brigade connection made from SS (suction collecting head) 10605.00 Rupees Ten Thousand Nos.
consisting of 2 Nos. 63 mm dia instantaneous type male couplings with built-in check Six Hundred Five Only
valves, drain valve 1 No. with flanged outlet complete with bolts, nuts and rubber
insertions as required and as per
242 6.00 Nos. Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity 7777.00 Rupees Seven Nos.
with necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall Thousand Seven
complete.[A] For 4.5 Kg Capacity Hundred Seventy Seven
243 5.00 Nos. Supply & erection of ISI marked portable fire extinguishers, wall mounted type, wall 4545.00 Rupees Four Thousand Nos.
brackets complete in all respect as per standard item with all accessories, delivery Five Hundred Forty Five
hose & nozzle wherever required, including fixing on walls as per the directions of Only
Engineer-in-charge. Water CO2 nozzle type. 9 Lt.capacity
244 6.00 Nos. Supply & erection of ISI marked portable fire extinguishers, wall mounted type, wall 6969.00 Rupees Six Thousand Nos.
brackets complete in all respect as per standard item with all accessories, delivery Nine Hundred Sixty Nine
hose & nozzle wherever required, including fixing on walls as per the directions of Only
Engineer-in-charge. ABC dry powder stored pressure type 6 Kg. capacity (IS:15683)
245 0.00 Job Charges for liasoning with CFO and getting all approvals and permissions & NOC 's 89768.80 Rupees Eighty Nine Job
required for fire fighting at various stages & after completion of the project.(All official Thousand Seven
and receipted paymentswould be submitted and Reembursed) Hundred Sixty Eight And
Paise Eighty Only
246 10.00 Nos. Fire exit signs of standard size ( Size 450 x 200 x 84 mm or nearest )(photoluminous 5612.59 Rupees Five Thousand Nos.
type.(glowing in dark type)Providing and fixing portable fire extinguishers of approved Six Hundred Twelve And
make ISI marked of following Capacity at the places shown on Drawing & mentioned Paise Fifty Nine Only
247 20.00 Nos. Providing and fixing 3mm thick PVC sheets as signage and display of health 661.55 Rupees Six Hundred Nos.
signs/information of required size having retro reflective letters/design as per Sixty One And Paise
requirement, fixing the same through approved adhesive etc. complete, work shall be Fifty Five Only
carried out as per instruction of engineer-in-charge. (Approved make PVC foamed
sheets only)(45 x 15 cms)
248 65.00 Rmt Providing, fixing, testing and commissioning of Auto Glow Signages patta For Wall 693.66 Rupees Six Hundred Rmt
and Flooring, (2" Wide) Ninety Three And Paise
DTP Maternity Home CHC Singvad 40 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
249 1.00 Nos. Supplying installing testing and commissioning electrically driven terrace 66660.00 Rupees Sixty Six Nos.
pump of capacity 900 Ipm, at 35 mtr head with all the necessary accessories Thousand Six Hundred
viz., pressure gauges etc., operating on 3ph 50 hz, 400/440V ac supply Sixty Only
including foundation, bolt etc., and complete control panel.
250 1.00 Nos. Supply and Installation of cast iron body dual check plate type NRV (non return valve) 16362.00 Rupees Sixteen Nos.
conf. to IS: 5312 PN-16, flang eend as per ANSI B 16.5, 150#, SORF, Serrated finish Thousand Three
flanged end. i)100mm Dia Hundred Sixty Two Only
251 80.00 Rmt Supplying, laying, testing & commissioning of FRLS, PVC outer sheath, steel 228.26 Rupees Two Hundred Rmt
armoured copper conductor, 1100v grade power cables with double compression Twenty Eight And Paise
glands etc.The cables shall be laid in tray / Hume pipe / in trenches/on walls/ floor etc. Twenty Six Only
as required. For cables laid out door the rate shall include earth excavation providing
brick and sand protection, refilling and compacting the earth.The rate shall excludes
tray & Hume pipes.The minimum size of the cables shall as mentioned below:
252 30.00 Nos. SITC of Analogue Addressable Multi- Sensor which is fully compatible with Analogue 5363.10 Rupees Five Thousand Nos.
Addressable Protocol,having removable high performance chamber with Twin fire Three Hundred Sixty
LED's allow 360 degree viewing, User selectable sensitivity modes 1% to 4.5% obs/m, Three And Paise Ten
Incorporate Optical and dual Heat elements, lock mechanism (sensor to base), Only
Electronically addressed, Pulsing/non- pulsing controlled from panel.
253 30.00 Nos. supply and installation of 8" x 8 " MS Junction Box. 140.39 Rupees One Hundred Nos.
Forty And Paise Thirty
254 5.00 Nos. Supply, installation, testing and commissioning of 12V 7AH batteries. 1367.95 Rupees One Thousand Nos.
Three Hundred Sixty
Seven And Paise Ninety
255 3.00 Nos. SITC of Analogue Addressable Manual Call Point with Integral Short Circuit Isolator, 7150.80 Rupees Seven Nos.
Analogue Addressable Protocol having, Bi-coloured status LED (red for alarm, amber Thousand One Hundred
for (short- circuit), Non-frangible element fitted as standard (conforms to EN54), Fifty And Paise Eighty
pulsing/non-pulsing can selectable via panel, Electronically addressed. Only
DTP Maternity Home CHC Singvad 41 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
256 650.00 Rmt Providing & Erection cable for fire alarm system 2 Core X 1.5 sqmm FRLS armoured 174.73 Rupees One Hundred Rmt
copper Cable Seventy Four And Paise
Seventy Three Only
257 6.00 Nos. Supply, installation, testing and commissioning of Intelligent Integrated Loopbased 8938.50 Rupees Eight Thousand Nos.
Sounder with Beacon - compatible with existing panel. Nine Hundred Thirty
Eight And Paise Fifty
258 1.00 Nos. Microprocessor based intelligent ,analogue addressable type fire alarm control panel 297500.00 Rupees Two Lakh(s) Nos.
with LCD display, four access levels, event historical logging, flash EPROM sufficient Ninety Seven Thousand
numbers of programmable relay controls, 240 volts AC power supply, automatic Five Hundred Only
battery charger, including all necessary software for programming of fire alarm system
with 100% redundancy to ensure operation even in case of single component
breakdown. The job includes supply, installation, testing and commissioning of entir
system. 4 Loop.
259 4.00 Nos. Loop Mounted Isolator - compatible with existing panel 3213.00 Rupees Three Thousand Nos.
Two Hundred Thirteen
260 4.00 Nos. Supply, Installation, Testing and Commissioning of Addressable Monitor 3570.00 Rupees Three Thousand Nos.
modulecompatible with existing panel. Five Hundred Seventy
261 1.00 Nos. Supplying and erecting push button operated fully automatic Star-Delta starter with 3 14100.00 Rupees Fourteen Nos.
Nos. of 15A.rating contactors and directly operated thermal overload relay having Thousand One Hundred
10-21A range and erected in sheet steel enclosure for 3 phase 415V. 50 c/s. A.C. Only
motors from 7.5 to 15H.P. complete erected on (a) P.W. Block with necessary
connection. Cat.III
262 30.00 mtr Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium 565.00 Rupees Five Hundred mtr
conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / Sixty Five Only
pipe of following size of cables (E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core)
DTP Maternity Home CHC Singvad 42 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
263 30.00 mtr Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand 219.00 Rupees Two Hundred mtr
Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in Nineteen Only
existing trench / pipe of following size of cables(B) 4 core 25 Sq. mm
264 2.00 nos Providing and erecting Approved make Four pole moulded case circuit breaker having 7830.00 Rupees Seven nos
breaking capacity ICU of 35 KA. at 415 V. having normal current rating 125A. with Thousand Eight Hundred
Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all Thirty Only
internal connections, spreader tinned copper & complete erected in existing 16 G.M.S.
housing. Cat-iii
265 2.00 nos Providing and erecting Approved make Four pole moulded case circuit breaker 15500.00 Rupees Fifteen nos
having breaking capacity ICU of 35 KA. at 415 V. having Normal current rating Thousand Five Hundred
200A.with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. Only
with all internal connections, spreader tinned copper & complete erected in existing
G.M.S.housing Cat-iii
Furniture & interior
DTP Maternity Home CHC Singvad 43 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
266 1.00 No Providing and Supplying Motorized bed. with 7 Function Bed, 6 embedded control 231488.00 Rupees Two Lakh(s) No
panel + 1 ACT panel Intensive care unit bed with back rest up down, knee rest up- Thirty One Thousand
down, Trendelenburg and reverse Trendelenburg, Hi-low position, Lateral Tilt Four Hundred Eighty
controlled through electro mechanical actuators operated using soft touch control Eight Only
panel.The embedded control panels are placed: 4 no’s at the Head boards and 2 no’s
at the Leg boards. Nurse embedded panel should have features like backrest, leg-
rest, High-low, TR/ATR, Auto CPR, Single button Cardiac chair position, Shock
position, auto-contour and Locking features.Patient embedded panel should have
features like backrest, leg-rest, High-low.. The Digital Attendant Control Touch Panel
mounted on leg-board can be used to operate functions such as backrest, leg-rest,
High-low, TR/ATR, Auto CPR, Single button Cardiac chair position, Shock position,
Lateral Tilt, auto-contour , weight measurement, Under bed light, Out of bed alarm
and Locking features.The lateral tilt feature can only be operated when the
sideboards are up / engagged to prevent patient fall, when the lateral tilt orientation is
shifting from right to left/left to rght there should be a pause of 4 seconds and beep
sound as a safety feature. Base frame is made of 30mmx 60mm 2mm thick MS CRCA
rectangular tube with the bed frame of 50x 25mm and 40 x20mm, 2mm thick MS
CRCA rectangular tube.. The embedded control panel ICCU bed has four section
lying surface with ABS vacuum formed with antimicrobial property which should be
easily removable, washable to maintain hygiene with integrated mattress retainer.The
bed has four numbers of PP moulded side boards with embedded control panels (2
no’s for Patient and 4 no’s for Attendant) and drop-down mechanism, completely
collapsible , the side boards should be air mattress comaptible and height of the side
boards should be more than 400 mm.There are 4 nos of bumpers given at the four
corners made up of TPE ( thermo plastic elastomer) with excellent shock absorbing
property.There are two nos of CPR lever, one at either side of the bed for quick
release of the back rest during emergencis. In order to achieve the Deep Vein
Thrombosis (DVT) position, the lower leg rest portion of the bed frame has the
Provision of a MS zinc plated ratchet. The ratchet is adjustable in five different
positions.Technical Details:∙ Overall Length: <2200mm∙ Overall Length (with
DTP Maternity Home CHC Singvad 44 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
267 23.00 No Providing and Supplying Fowler bed should have Overall dimension: (L) 2138 x (W) 38000.00 Rupees Thirty Eight No
908 x (H) 559mmFunctions : Two function bed with adjustable backrest 70deg and Thousand Only
upper leg rest 24deg Head board and foot board : 25.4 mm dia 1.2 mm thick ss202
made tube with 18 mm thick PLT board.Bed frame : bed frame is made of MS ERW
rectangular section tube of size 30mmx60mm of 1.6mm thick. . it has Provisionision
4 iv pole holders . It is strengthened by rectangular tube section of size 60mmx30
mm having 1.6 mm thicknessleg Under Structure : ERW round tubes used with
thickness of 1.2mm with section 31.75 mm dia.Lying surface : Lying surface made of
MS ERW of thickness of 1.0 mm thick . This lying surface have 4 sections for bed
profiling i.e. back adjustment, fixed pelvic section, upper and lower leg adjustment.
Lower leg rest section is provisioned with Ratchet for leg rest adjustment. Mattress
platform is strengthened by tubular frame of size 25.4mm dia x 1.2mm thickness. It
is strengthened by trapezoidal contour ( rounded corner ) 16 nos, embossed cut out.
All metal components are pre treated with zinc phosphating and then powder coated
with epoxy polyester powder coating. Mechanism : All functions are operated with
lead screw mechanism, ACME threaded EN8 made 6mm pitch for easy in
movement.Castors : High endurance, metal castors of 125mm dia having
Provisionision for diagonal locking with stem dia 22mm should be provisioned for
better stability.Powder coating :Anti rust, thermosetting epoxy polyester powder
coating should be used. All powder coating is in Ral White.Maximum weight
:Maximum safe working load is 135 kg.Handle : All the functions are operated with the
help of single ergonomically handle, which are made of metal inserted PP co
polymer , it's lever is snap locked when not in use. All the handles are Provided with
operating guidance stickers.welding : To ensure quid quality welding " Co2 Argon"
process is adhered to.powder coating : All metal components are pre treated with
zinc phosphating in 7 tank process and then powder coated with epoxy polyester
powder coating .].packing : goods are supplied in knocked down construction to
reduce carbon emission. In house test report : proof loading test , cycle tests , impact
test, horizontal and vertical load tests for side rails, salt spray test, castor break test,
pull test for head and foot board.The rate shall include all materials, hardware, and
DTP Maternity Home CHC Singvad 45 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
268 23.00 Nos Providing and Supplying hospital locker. The bedside locker has single drawer and 11901.00 Rupees Eleven Nos
cabinet with lock and with plastic molded handle. There is space between plastic top Thousand Nine Hundred
and the cabinet to keep the general items for the frequent use. Cabinet is One Only
Provisionided with lock to keep the valuable items for the safety. overall dimensions
should be 490mmW x 410mm D x 941mm H.Corner tube made of ERW round tube
with section 25.4 mm dia of 1.2 mm thickness.Cabinet made of CRCA sheet of
mm thick Provided with lock.( 470 mm x 410 mm x 382 mm).Top made of ABS of
mm thick. Top has recessed and contoured shape for better aesthetic and
usability.Plastic molded knob is Provisionided with Matt finish and dome shaped for
better grip.Plastic molded castors with 50 mm dia placed in diagonal locking
arrangement.RAL white, plastic parts in Grey.5 kg UDL on both the tops and 10 kg in
the cabinet.All metal components are pre treated with zinc phosphating in 7 tank
process and then powder coated with anti microbial epoxy polyester powder coating
to fulfill the requirements for bacterial protection against at least 2 commonly found
bacteria in Hospital environment [Gram positive and Gram Negative].goods are
supplied in knocked down construction to reduce carbon emission. The rate shall
include all materials, hardware, and labour etc. complete as per instruction of
engineer-in charge.
269 23.00 Nos Providing and Supplying of IV pole of saline stand. Overall dimension should be 250 4435.00 Rupees Four Thousand Nos
mm PCD with height adjustable from 743 mm to 1150 mm. it is fully SS made used on Four Hundred Thirty Five
bed with telescopic rod for height adjustment. The bottom adapted is 12 mm dia, fixed Only
tube is 15.9 mm dia , 1.6 mm thick ERW Tube. Telescopic rod is 12 mm dia ERW
tube. there are 2 nos 6 mm dia hooks to hand saline bags. Maximum load bearing
capacity is 2kg per hook.The rate shall include all materials, hardware, and labour etc.
complete as per instruction of engineer-in charge.
DTP Maternity Home CHC Singvad 46 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
270 1.00 Nos Providing and Supplying of Examination couch with full storage of Examination 41900.00 Rupees Forty One Nos
couch with full storage- Overall dimension 1975 mm (L) x 560 mm ( W) x 805 mm (H). Thousand Nine Hundred
Examination couch with three drawers with three cabinets, inbuilt step stool and BP Only
tray holder.the base frame should made of 30 mm x 30 mmX 1.6 thick ERW tube. The
cabinets should made of 1 mm thick CRCA sheet with recessed plastic handles and
with lock and plastic door latch. the hindges of the cabinet should be made of sheet
metal and pin arrangement. The internal dimension of the two sidecabinets should be
422 mm (W) x 455 mm (D) x 540 mm (H). the internal dimension of the centarl cabinet
should be 422 mm (W) x 455 mm (D) x 358 mm (H). The storage cabinet unit should
be mount tubular base frame. The head rest should be adjustable on gas spring which
should be actuated with C shaped handle lever . The drawers should made of 1 mm
thick CRCA sheet with recessed plastic handles and work on double extension ball
slides for smooth glide. the internal dimension of the drawer should be 330 mm (W) x
427 mm (D) x 92 mm (H). The mattress platform should be 65 mm thick which is
made of 12 mm thick ply and PU foam and covered with leatherite cover.the cover
should be water resistant, fire retuardant, aniti micraobial . the cover should have in-
vitro cytotoxicity test report from reputed test lab. the end of the top mattress surface
should be tapered end edge for ergonomic benifit. There should be ss304 made
tissue roll holder present on the lower side of the back rest. There should be 1 mm
thick CRCA made step stool with leveler with double extension ball slide for smooth
operation. There should be 1 mm thick CRCA made BP aparatus holder which should
be adjustable in height on a SS made height adjustable rod. Total load bearing
capacity should be 135 kg. The examination couch should be provided with six
numbers levelers made of metal and plastic for adjustment on the uneven floor. All
the metal parts should be pre treated and powder coated with epoxy polyester powder
coating.The rate shall include all materials, hardware, and labour etc. complete as per
instruction of engineer-in charge.
DTP Maternity Home CHC Singvad 47 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
271 6.00 No Hydraulic labour bed 97458.00 Rupees Ninety Seven No
Structure made up of 60x30x1.6 mm tubes with dual support system of 40x20x1.6 mm Thousand Four Hundred
tubular CRCA frame work Top made up of water proof 5 mm backlight (hi lam ) sheet Fifty Eight Only
in three pieces Upper layer and bottom layers must be jointed by single pivot
mechanism made up of 20x40 mm tubes Sliding roller mechanism for leg movement
Head portion made up with cnc made roller mechanism with gear modules system
with abs handle for up down at various positions .
Main height up down feature available with hydraulic single release system 125 mm
heavy duty castor's 1 set of lithotomic leg rest
3 sectional top with high quality cusioned work Cushioned top made with 40 density
with Rexine cover
272 23.00 No Providing and Supplying of round stool should have of round stool. Overall 1550.00 Rupees One Thousand No
dimension should be Diagonal Leg Dia 538 mm H470 min-655max. Top plate made Five Hundred Fifty Only
of SS 304 made sheet with spin section of thickness 1mm and non corrosive. It has
a diameter of 305mm, seat base made of MS ring and rectangular tube. EN8 Screw
having dia of 22 mm is used for height adjustment of the seat base. The round hub
made of MS ERW tube having dia of 38mm and thickness 2 mm. The Hub is welded
with the legs and it accommodate and cover the lead screw mechanism. The under-
structure consist of 4 legs made up of MS ERW tube of diameter 25.4 mm and
1.6mm thick. The press formed pipe leg give a round and clean look. All the legs is
Provided with 4 nos of Nylon-6 bush. All metal components are pre treated with zinc
phosphating in 7 tank process and then powder coated with epoxy polyester powder
coating . Safe working load is 135kg .The rate shall include all materials, hardware,
and labour etc. complete as per instruction of engineer-in charge.
273 4.00 No Supplying of Dust bin of approved brand Sintex or equivalent (as per photographs) of 1560.00 Rupees One Thousand No
100 Liter Capacity Five Hundred Sixty Only
DTP Maternity Home CHC Singvad 48 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
274 4.00 No Providing and Supplying STRETCHER ON TROLLEY should have Strecher on 31834.00 Rupees Thirty One No
trolley with Overall dimension should be 2005 mm (L) x 666 mm (W) x 827 mm (H). It Thousand Eight Hundred
should be removable stretcher on trolley mointed on castors.. The trolley should be Thirty Four Only
made of 31.75 mm and 25.5 mm dia 1.2 mm thick and 1.6 mm thick ERW tube.
The casters should be 200 mm dia diagonal lockable castors. stretcher understructure
should be made of 25.4 mm dia 1.6 mm thick ERW tube and the top should be made
of 1.2 mm thick CRCA sheet. The stretcher should have provision to mount IV pole at
four corners. The product should be pre treated and powder coated with Epoxy
polyster powder coating.The maximum load bearing capacity should be 135 kg.The
rate shall include all materials, hardware, and labour etc. complete as per instruction
of engineer-in charge.
275 4.00 No Providing and Supplying Foldable wheel chair should have Foldable wheel chair 16290.00 Rupees Sixteen No
with Over all dimension should be (L) 790 x (W) 600 x (H) 870mm Foldable frame Thousand Two Hundred
structure should be made of section 22x1.2mm A3 carbon steel with chrome finish. Ninety Only
Cross bar should be made of A3 carbon steel with section 25.4 x 1.2mm.The Rear
wheel should be made of 24 inch Solid mag wheels with alloy in the rim .Integrated
handrim shoud be provided to drive the wheel chair of section 16x1.2mm A3 carbon
steel with chrome finish. The front wheel should be of 8 inch HUB made of PA
polymer and outer with solid rubber. PU molded arm rest and base should be made
of ABS for better arm support .There should be Leatherite strap for calf rest and
leatherite cushion for seat. The foot rest should be Adjustable alluminimum die cast
foot rest with updown and swivel type mechanism and Push Handles should be
made of moulded rubber grip to push the wheelchair. Hand brakes should be provided
to lock the wheelchair at desired location. The finsih of chair should be antirust
chrome .The rate shall include all materials, hardware, and labour etc. complete as
per instruction of engineer-in charge.
DTP Maternity Home CHC Singvad 49 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
276 4.00 No Providing and Supplying Three-Fold partition screen should have Three-Fold 10073.00 Rupees Ten Thousand No
partition screen- Overall dimension: L 2637 X W 640 x H 1720 MM. Frame should be Seventy Three Only
made of ERW tube with movable plastic hinges. The fix frame should be made of
mm dia 1.2 mm thich ERW tube, the movable frame shouuld be made of 19.05 mm
dia 1.2 mm thich ERW tube and the leg frame should be made of 30 mm suqare tube
with 1.6 mm .thick. The fixed portion should be 1075 mm width and the movable
portion should be 778 mm width. 50 mm dia wheel castors should be provided. All MS
parts should be pre treated and powder coated with thermosetting epoxy polyester.
Green color Casement fabric must be provided for modesty.The rate shall include all
materials, hardware, and labour etc. complete as per instruction of engineer-in
277 4.00 No Providing and Supplying of OXYGEN CYLINDER TROLLEYshould have MS 4856.00 Rupees Four Thousand No
Oxygen cylinder trolley suitable for B type oxygen cylinder. The overall dimension Eight Hundred Fifty Six
should be 410 mm (L) x 375 mm (W) x 1112 mm (H). The main frame should made of Only
25.4 mm dia 1.6 mm thick ERW tube with 10 mm dia ms made locking rod to keep the
cylinder position during transit.The trolley should be provided with 100 mm dia 25 mm
thick PU wheel for longer durability. LDPE made leg bush should be provided on the
legs. Max load bearing capacity should be 50 kg.The rate shall include all materials,
hardware, and labour etc. complete as per instruction of engineer-in charge.
278 4.00 No Providing and Supplying of Instrument trolley should have ISO 13485:2016 22844.00 Rupees Twenty Two No
certificate from NABCB certified agency, CE certificate from european notified body Thousand Eight Hundred
with 4 digit registration code, ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 Forty Four Only
Certified and should be mandatorily submitted along with Bid. of Instrument trolley-
SS 304 sheet should be provided at top for the placement of the instruments being
used and also for easy in portability. SS 304 sheet should be provided at the top as
well as bottom shelf for keeping the instrument being used. Horizontal bars should be
welded with legs so as to provide protection at sides with supporting legs giving a
sturdy look.Castors of 125mm Dia. should be used for easy in movement. Overall
Dimension: 775mm X 531mm X 915mm H. Maximum safe working load must be
40kg.The rate shall include all materials, hardware, and labour etc. complete as per
instruction of engineer-in charge.
DTP Maternity Home CHC Singvad 50 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
279 2.00 No Providing and Supplying of Medicine trolley should have Medicine trolley-Overall 23986.00 Rupees Twenty Three No
dimension: - 902(L) X 532(B) X 915(H) mm. Top shelf and bottom shelf should be Thousand Nine Hundred
made of SS304 sheet with 1mm thickness and 1.2mm. Rest of the components like Eighty Six Only
supporting legs, horizontal bar handle should be made of SS 304 pipe having dia
31.8, 12.7 mm respectively. The castors of high quality plastic injected molded and
anti static having the dia of 125mm should be used.Handles made of SS 304 pipe
having section of 16mm and thickness of 1.2mm should be used.The rate shall
include all materials, hardware, and labour etc. complete as per instruction of
engineer-in charge.
280 23.00 No Providing and Supplying mayo trolly should have Mayo trolley-overall sizes of Base 10981.00 Rupees Ten Thousand No
rectangle 504mm X 655mm X Adjustable from 814mm to 1340 mm. Height Nine Hundred Eighty
adjustment will be achieved with screw knob mechanism. Bottom frame should be One Only
made of 1.2mm thick SS 304 tube of dimension 38 x 38mm square tube. Top frame
should be of 1.2mm thick and 304 SS grade rectangular shape of dimension 30 x
30mm. Fixed tube of 3 mm thickness square in shape of 38 x 38mm telescopic tube
should be used of 2 mm thickness rectangular in shape of 30 x 30mm. Locking knob
should be used ergonomically designed made of SS screw and nylon knob. Tray
supporting frame should be of thickness of 1mm. Castors must be injection molded
type of 50mm dia having high endurance, anti-static properties. Safe working load
must be 20kgs.The rate shall include all materials, hardware, and labour etc. complete
as per instruction of engineer-in charge.
281 1.00 No Supplying and installing Biomedical waste trolley of 60 Liter capacity of Best Plastic 21500.00 Rupees Twenty One No
and approved brand and selected colour etc.(As per Photograph) Sintex of Thousand Five Hundred
Equivalent.(Set of 3 Bucket) Only
DTP Maternity Home CHC Singvad 51 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
282 5.00 No Providing and Supplying crib should have Crib for infant should be made of wire 13710.00 Rupees Thirteen No
mesh crib on ms trolley.Dimension Overall size should be 892 mm (L) x 536 mm (W) Thousand Seven
x 1008 mm (H).The crib is of 16 mm and 5 mm dia 1.6 mm thick ERW tube. The Hundred Ten Only
mesh is designed to accommodate the baby to Provide ventilation and visibility.The
base frame is of 25.4 mm and 10 mm dia 1.6 mm thick ERW tube with 125 mm
individual locking castor.The maximum load bearing capacity is 20 kg.All metal
components are pre treated with zinc phosphating in 7 tank process and then powder
coated with epoxy polyester powder coating .All powder coated parts in RAL
white.Maximum patient load is 20 kg.
packing goods are supplied in knocked down construction to reduce carbon emission.
The rate shall include all materials, hardware, and labour etc. complete as per
instruction of engineer-in charge.
283 23.00 No Providing and Supplying mattress should have Mattress with overall dimension 2011.00 Rupees Two Thousand No
should be (L)615mm*(W)315mm*(H)50mm MATTRESS FOR CRIB ON BED and Eleven Only
CRIB ON TROLLEY , mattress made of 40 density pu foam. The mattress have high
end heavy helium cover which is water resistant, x ray permeable, fire retardant.The
rate shall include all materials, hardware, and labour etc. complete as per instruction
of engineer-in charge.
284 5.00 No Providing and Supplying mattress should have Mattress with Overall dimension 2950.00 Rupees Two Thousand No
should be (L)1415 mm*(W)785 mm* 75 mm(H).Mattress is with 40 density 75 mm Nine Hundred Fifty Only
thick Single section PU foam mattress which is covered by heavy helium material
which is water proof, flame retardant, vapour and X-ray permeable. The zip and
stitches for the mattress cover is concealed. The rate shall include all materials,
hardware, and labour etc. complete as per instruction of engineer-in charge.
DTP Maternity Home CHC Singvad 52 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
285 1.00 No Providing and Supplying of Emergency Crash Cart should have Advanced 62347.00 Rupees Sixty Two No
emergency cart constructed of CRCA Powder Coated MS Sheet of thickness 1.2mm. Thousand Three
overall dimension of L 1037 W x 672 H x 1435 mm. Hundred Forty Seven
Should have 5 drawers with drawer configuration: 2 small (390(L)x600(W)X71(H)mm) Only
+ 2 medium (390(L)x600(W)X149(H)mm) + 1 Large (390(L)x600(W)X227(H)mm). all
drawers should be lockable through central locking. Should have anti-tilt mechanism.
should have minimum five drawer with adjustable acrylic separators. Should have
cam lock type central locking mechanism for drawers Provided with 100 security seal
tagsShould have following accesories items.defibrillator shelf with monitor straps,
sharps container – 2qty. oxygen cylinder holder, cardiac chest board made of
compact laminate, push/pull writing surface, utility tray, document holder, catheter
holder., a waste bin discarding syringes and gloves.wire wounder and mounting
screws for spike guard.cart should have ABS vacuum formed top tray of thickness
3mm, Aluminum push handle of dia. 25mm built into the end panel for smooth stable
movement. Pullout writing surface top. cart should be light, sturdy, scratch and dent
resistant. should have 4 TPE corner bumpers for collision protection, Single wheel
front locking castors should have 125mm diameter to facilitate quiet and easy
movement. ABS grade made top sheet with 3mm thickness should be used. MS
Cylinder case should be used with 2 Velcro straps to hold the cylinder with a foam
padded base. SS 304 grade pipe of section 16mm and thickness of 1.6mm should
be used to to mount IV rod. High endurance anti-static, Aluminum handle pipe should
have section of 25mm with length of 365mm and should have thickness of 1mm
giving a glossy finish. Metal parts should be pre treated and powder coated with epoxy
polyster pwder coat. Safe working load must be 55kgs.Optional accessory: Spike
guard/Extension board.The rate shall include all materials, hardware, and labour etc.
complete as per instruction of engineer-in charge.
DTP Maternity Home CHC Singvad 53 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
286 3.00 Nos Providing and Supplying single bed with Overall Size:Width - 2050.0 mm Depth - 7250.00 Rupees Seven Nos
973.0 mm Height - 720.0 mm.Material:Headboard panels are made of 18 mm thick Thousand Two Hundred
Prelaminated Particle Board. All the exposed edges are edge banded with 2 mm thick Fifty Only
PVC edge banding.Bed leg frame structure consist of metal frames made of M.S. 50 x
25 mm box section in 1.2 thickness Internal Pipes made of 19 x 19 mm box section in
0.9 mm thickness. Headboard pipes are made of 25 x 25 mm box section in 0.9 mm
thickness. Mattress holding bkt is made of 0.6 mm CRCA SHEET Mattress frame
sheetmetal top is made of 1 mm CRCA SHEET.Hardware:The high quality hardware
used. Construction:Knock Down construction.Packets: 1 packet. Finish:18 mm thick
Prelaminated Particle Board is in 4501, make — GODREJ (SHIRVAL).Bed leg frame
structure are powder coated in shade : MATT TAUPE WHITE. REF NO. 9001904to
thickness of 50 microns (+-10). Mattress frame structure are powder coated in shade :
EPP FR TEX. MILKY WHITE 20K, REF NO. 9003456 to thickness of 50 microns (+-
10). Rest all metals are powder coated in shade : S/G CHARBROWN. REF NO.
9000605 to thickness of 50 microns (+-10).The rate shall include all materials,
hardware, and labour etc. complete as per instruction of engineer-in charge.
287 3.00 Nos Providing and Supplying side table with Overall Size :Depth — 461.0 mm Width — 4000.00 Rupees Four Thousand Nos
460.0 mm Height — 510.0 mm Material:Body panels of Bed side table are made of 18 Only
mm thick Prelaminated Particle Board 1S:12823 Class E1 (as per EN13986) .All the
exposed edges are edge banded with 0.8 mm thick PVC edge banding glued with Hot
Melt EVA glue.Drawer front are made of 18 mm thick Prelaminated Particle board
1S:12823 Class E1 (as per EN13986). Hardware:The high quality hardware used like
Roller slides, Hinges , minifix, dowels is of make Hettich.Construction:Knock Down
construction.Packets :1 packet.Finish :.18 mm thick PrelaminatedParticle Board
1S:12823 Class E1 (as per EN13986) is in Imperial Oak shade.Lipping shade is 299P
MAKE REHAU.The rate shall include all materials, hardware, and labour etc.
complete as per instruction of engineer-in charge.
DTP Maternity Home CHC Singvad 54 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
288 2.00 Nos Providing and Supplying glass door storwel . Glass Door Storwel shall have an 16000.00 Rupees Sixteen Nos
overall size of 916mm(W)x486mm(D)x1980mm(H) with welded construction. It Thousand Only
should have shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of
0.8mm (high yield strength) and all other components shall have a thickness of
0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as
per IS:513. The glass door storwel shall have a brass handle and a 2 way locking
mechanism with shooting bolt . It should have a height wise adjustable shelf
mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It
should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall
include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour
options and shelving options shall be available.The rate shall include all materials,
hardware, and labour etc. complete as per instruction of engineer-in charge.
289 1.00 Nos Providing and Supplying main table with ERU ..Supplying and placing in position 19270.00 Rupees Nineteen Nos
Main Table with ERU of the following specifications. Its size shall be 1650 Width x Thousand Two Hundred
700 Depth x 743 Height (Main Desk) 1000 Width X 450Depth X 743 Height Seventy Only
(ERU).Top shall be of 18 mm thickness made of PLT board with 2 mm Edge banding.
Wenge and savannah Maple PLT board shall be used. The Understructure shall be in
pre-laminated panels made with PLT boards . 2- Drawerand 3 - Drawer storage units
with different combinations to support tops made with 18 mm PLT boards of different
colours.Modesty and back panels made with 18 mm PLT boards. The pedestals /
storages shall be fitted with necessary locks. The rate shall include all materials,
hardware, and labour etc. complete as per instruction of engineer-in charge.
290 4.00 Nos Providing and Placing Slotted Angle Rack : 1300 W X 500 D X 1895 H mm. To be 8500.00 Rupees Eight Thousand Nos
provided with 5 Shelves. Blotless Rack made of CRCA Steel. Five Hundred Only
DTP Maternity Home CHC Singvad 55 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
291 1.00 Nos Providing and Supplying Leatherette chair with High Back Chair. SEAT/BACK 20500.00 Rupees Twenty Nos
ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer Thousand Five Hundred
and inner. Plastic Inner should be upholstered with pure leather and moulded High Only
Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ±
kgf for 25 Percent compression.The Cushioned back should be made of PU Foam
with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It
upholstered with Pure Leather.Seat SIZE : 47.6 cm. (W) x 49.2 cm. (D)BACK SIZE :
47.5 cm. (W) x 77 cm. (D)ARMRESTS: The armrest top should be moulded from
polyurethane(PU), upholstered in pure leather and mounted on to a drop lift adjustable
type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S E.R.W
tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in
steps.ACTIVE BIO-SYNCHRO MECHANISM: The adjustable tilting mechanism
should be designed with the following features:• 360° revolving type.• Front-pivot for
tilt with feet resting on ground and continuous lumbar support ensuring more comfort.•
Tilt tension adjustment can be operated in seating position.• 5-position Tilt limiter
giving option of variable tilt angle to the chair.• Seat/back tilting ratio of 1: 2• The
mechanism housing should be made up of HPDC Aluminium black powder
coated.SEAT DEPTH ADJUSTMENT: Seat depth adjustment should be integrated in
the seat through a sliding mechanism. Seat depth adjustment range should be of
6.0±0.5 cm.ADJUSTABLE BACK SUPPORT: Back Frame should be connected to
the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of
7.42±0.5 cm for the comfortable back support to suit individual need.PNEUMATIC HT.
ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of
10.0±0.3 cm.PEDESTAL ASSEMBLY The pedestal should be High Pressure Die cast
polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be
65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.)TWIN WHEEL
CASTORS:The twin wheel castors should be injection moulded in Black
Polypropylene. Overall Dimensions of Chair-Seat Height -44.5 to 54.5 cm.Height -
114.0-131.5 cm.Width and Depth of Chair as measured from base - Width-76.1 cm
and Depth-76.1 cmThe rate shall include all materials, hardware, and labour etc.
DTP Maternity Home CHC Singvad 56 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
292 3.00 Nos Providing and Supplying Leatherette chair office chair.SEAT/BACK ASSEMBLY: 4810.00 Rupees Four Thousand Nos
The seat and back should be made from seasoned wood and plywood. The same Eight Hundred Ten Only
should be upholstered with black synthetic leather and polyurethane foam.BACK
SIZE: 46.0cm. (W) X 27.0cm. (H) SEAT SIZE: 46.0cm. (W) X 40.0cm. (D).ARMREST
TUBE: The armrest tube should be made of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk.
M.S. E.R.W. tube and powder coated (DFT 40-60 microns).UNDERSTRUCTURE
ASSEMBLY: The understructure assembly should be a cantilever type frame made of
0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. tube and powder coated (DFT 40-
60 microns).Overall Dimensions of Chair-Seat Height - 48.0 cm.Height -
87.5cm.Width and Depth of Chair as measured from base - Width-58.0 cm and
Depth-56.5 cm.The rate shall include all materials, hardware, and labour etc.
complete as per instruction of engineer-in charge.
DTP Maternity Home CHC Singvad 57 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
293 12.00 Nos Providing and Supplying public seating. SEAT SHELL : The Seat is made from high 20500.00 Rupees Twenty Nos
density self-skin Polyurethane foam reinforced with 1.2 mm M.S. perforated sheet Thousand Five Hundred
insert. The Polyurethane foam having density of min. 350 kg/m3 with a Shore 'A' Only
hardness of 60±10.SEAT SIZE : 52.0 cm (W) x 50.5 cm (D)BACK SHELL : The Back
is made from high density self-skin Polyurethane foam reinforced with 1.2 mm M.S.
perforated sheet insert.The Polyurethane Foam having density of min. 350 kg/m3 with
a Shore 'A' hardness of 60±10.BACK SIZE : 52.0 cm (W) x 53.5 cm (H)CROSS BEAM
: Cross Beam made up of Diamond shaped double wall Extrusion of Aluminum 6063-
T6 Alloy with coated of 50 micron epoxy polyester coating and fitted with
Polypropylene Copolymer engineering plastic end caps.CROSS BEAM SIZE : 11.3 cm
(W) x 9.4 cm (H) X 0.4 cm (Thickness).LEG : Legs are made up of High pressure
Aluminum ADC12 Die cast coated with 50 micron epoxy polyester coating, Leg Are
fitted with soft grip PVC level adjusting shoes.ARMREST : Armrest are made up of
High pressure Aluminum ADC12 die cast coated with 50 micron epoxy polyester
coating.SEAT SUPPORT BRACKET Assembly : Seat support bracket assembly made
up of argon shield welding of Hot Rolled Steel (IS: 2062) 0.3cm Thickness. This
welded structure is coated with 50 micron epoxy polyester coating.CLAMPING
BRACKET : Clamping bracket are made up of Hot Rolled Steel (IS: 2062) 0.3cm
Thickness coated with 50 micron epoxy polyester coating.Overall Dimensions of Chair-
Seat Height - 42.5 cm.Height - 87.0 cm.Width-165.5cm and Depth-66.5 cm.The rate
shall include all materials, hardware, and labour etc. complete as per instruction of
engineer-in charge.
294 1.00 Nos Providing and Supplying Green certified center table should be mandatorily 4350.00 Rupees Four Thousand Nos
submitted along with Bid. of coffee table. CENTER TABLE GLASS: It is 10 ±0.3 mm Three Hundred Fifty Only
thick black tinted Toughened glass UV glued with bushes made in SS 202 grade for
focing with understructure. CENTER TABLE UNDERSTRUCTURE: It is a welded
Assembly made in SS202 gradeDia. 12±0.04 as per IS:1762.Width of table Equal
112.0 cm, Depth Equal60.0 cm, height Equal34.9 cm.The rate shall include all
materials, hardware, and labour etc. complete as per instruction of engineer-in
295 3.00 Nos Supplying and Placing Slotted shoe Rack : 900 W X 300 D X750 H mm. To be 2250.00 Rupees Two Thousand Nos
provided with 4 Shelves with SS 304 grade supporting legs, horizontal bar is made of Two Hundred Fifty Only
SS 304 pipe having dia 31.8, 25 mm respectively.
DTP Maternity Home CHC Singvad 58 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
296 60.00 sqmtr Providing and Placing of Manual Roller blinds having Aluminum Roller tube along with 765.00 Rupees Seven Hundred sqmtr
fabric pasted on it with glue having control unit for manual operations and bottom bar Sixty Five Only
Aluminum powder coated for weight purpose, including fabric, fitting and accessories
of approved make and colour etc. complete.Vista/Hunterdouglas or equivalent.
Fabric to be approved by architect
297 15.00 Nos Providing and Placing of Dust bin of approved brand Sintex or equivalent (as per 720.00 Rupees Seven Hundred Nos
photographs)of 5 Liter Capacity Twenty Only
298 23.00 Nos Providing and Placing of Chart holder for holding the chart which can be hanged on 700.00 Rupees Seven Hundred Nos
the side of beds. Material:‐ CRCA 0.6mm Thickness powder coating:All metal Only
components should be pre treated with zinc phosphating in 9 tank process and then
powder coated with anti microbial epoxy polyester powder coating
299 15.00 Nos Providing and Placing Photo with Frame, Size : 600 X 400 Providing and Fixing Photo 2000.00 Rupees Two Thousand Nos
Frame made of Teakwood Border Patti of size 25x25 with melamine polish finish with Only
3 mm glass and inside the picture on Photo paper with high resolution picture quality
and sticked on MDF as selected by engineer‐in‐charge including all necessary fixture,
fasteners,labour , material etc comp.
300 6.00 Nos Providing and Placing Ajanta Make : Wall Clock Provinding and fixing Ajanta make 531.00 Rupees Five Hundred Nos
wall clock of the desired shape and design as selected by engineer in charge Ajanta Thirty One Only
301 20.00 sqmtr Providing and Placing Kitchen Platform Providing and Fixing kitchen storage made of 13000.00 Rupees Thirteen sqmtr
18mm thick BWR plywood with 1mm thick laminate finish.drawers and shutter made Thousand Only
of 18mm thick BWR plywood with 1m thick laminate finish.Drawer run on telescopiec
chennal and shutter hanging on auto hinges with all necessary hardware
included.Kitchen under storage
DTP Maternity Home CHC Singvad 59 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
302 1.00 Nos Providing and Placing Alkosign Make : Key Cabinet 40 keys Providing and fixing 4780.00 Rupees Four Thousand Nos
Steel Back key cabinet for 40 keys having overall size of 520mm (W) x 50mm (D) of Seven Hundred Eighty
500mm (H) of 13mm Anodised aluminum single and double frames. Back steel Only
sheet is grey colour powder coated with 40 nos punched holes for key chain with steel
wire rings numbered 1 to 40 having corners of ABS in grey colour. Cabinet should with
1 no of lock with 2 nos of keys and top cover in 3 mm thick acrylic sheet including all
neceassary fixture, faster, fittings, labours material machniary etc complete as
selected and directed by engineer incharge Approved make:
scholar/pearl/alkonsign/elora Key Cabinet
: size : 520mm x 500 mm
303 18.00 Nos Providing and Supplying storage with Overall Dimensions of Store Up 600 W MAIN 9221.00 Rupees Nine Thousand Nos
BOND WHT shall be 600 mm W x 326 mm D x 785 mm H . The Construction shall be Two Hundred Twenty
aesthetically appealing completely knock down construction made from 0.6 mm thk. One Only
CRCA as per IS - 513 . Horizontal stiffener shall be made from 1.2 mm thk. CRCA as
per IS - 513 . The doors shall be made from 18 mm thk. interior grade pre-laminated
board as per IS - 12823 or 18 mm thk . Plain particle board as per IS -3087 with
thk. with 0.6 mm thk. decorative laminate and 0.6 mm thk. backing laminate as per IS -
2046 on either side . All edges shall be duly sealed with 2 mm thk. PVC edge banding
. Two door with single lock on RH door . Locking shall be 10 lever cam lock lever at
the bottom of the door .Shelving shall be Heightwise adjustable shelf 1 no. Uniformly
distributed load capacity of 25 Kg UDL .The finish shall be Epoxy powder coated to
the thickness of 50 microns .Overall Dimensions of Store Up 600 W WDN DOOR HL
PINE shall be 298 mm W x 18 mm D x 783 mm H RH side door with lock.298 mm
W x 18 mm D x 783 mm H LH side door w/o lock . The doors shall be made from
18 mm thk. interior grade pre-laminated board as per IS - 12823 or 18 mm thk . Plain
particle board as per IS -3087 with 0.6 thk. with 0.6 mm thk. decorative laminate and
0.6 mm thk. backing laminate as per IS - 2046 on either side . All edges shall be duly
sealed with 2 mm thk. PVC edge banding . It shall have two door with single lock on
RH door . The rate shall include all materials, hardware, and labour etc. complete as
per instruction of engineer-in charge.
DTP Maternity Home CHC Singvad 60 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
304 4.00 Nos Providing and Supplying Eco wooden storage range comprises of a range of Low 18000.00 Rupees Eighteen Nos
height to medium heightwooden HDU and SDU as per attasched DMX drg.Body : Thousand Only
Body is made from 18mm PLB with all the edges sealed with 0.8 mm thick PVC
Edgeband. The Back panel is 9mm White PLT. The entire construction is ready to
assemble unit and is assembled with suitable KD fittings.The shelves and separator
panels ( if available ) is made from 18 mm white PLT and edges are sealed with
mm edge band. The bottom shelf is fixed and other shelves have one step adjustment
for optimizing the space. Doors : Door Panels ae made from 18 mm PLB with 2 mm
Edge band on alledges ad a flush Plastic handle is fitted vertically at the center of the
door. The hinge door has suitable hinges and HDU is fitted with an adjustable fitting
for height adjustment. The SDU runs in a PVC track mounted on the TOP and Bottom
panel of the Body. HDU has a three point lock and SDU has a push type lock.All the
storages are fitted with a 6 mm leveler at bottom for leveling.The rate shall include all
materials, hardware, and labour etc. complete as per instruction of engineer-in
305 3.00 Nos Providing and Placing Single Bed Mattress ,pillow,bedsheet with pillow cover ,with 9558.00 Rupees Nine Thousand Nos
12mm thick prelam mdf back‐ 900x1950x100mm ‐ goldline plus pu form 40 density Five Hundred Fifty Eight
300 gsm cottan satin quilt cover.Mattress back putti made of 12mm thick prelam mdf Only
bothside white finish.Kurlon dew pillow 600x400 Fill: Polyester Fibre Quality of shell
fabric: 110 GSM cotton satin patti Outer Shell Layer: Cotton Fill Weight (in gms):
650.Bedsheet with pillow 100 Percent cotton of bombay dyeing or eq.
306 4.00 No Providing and Fixing 3 Seater Pero Cross Beam made of black powder coated regular 11475.00 Rupees Eleven No
MS ERW tube having 8.0+/-0.03 cm x 4.0 +/- .03 cm x 0.2 +/- Thousand Four Hundred
0.014 cm size. Legs to be chrom plated made of rolled steel with 0.12 +/- 0.013 cm Seventy Five Only
thinkness.Seat and Back Shell to be peforated made from cold rolled M.S. Sheet (DIN
1623 Part 1 ST -12 Grade), 0.14 +/- 0.013 cm thickness. The side Bar is made of
chrome Plate solid steel 3.0 cm +/- 0.03cm x
1.2 cm +/- 0.03 cm with fluting and plastic inserts. The Shell to be assembled on the
cross beam with help of M8 Bolts.
DTP Maternity Home CHC Singvad 61 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
307 1.00 No Providing and Placing inquiry counter with Worksurface of size W - 3665 X D 1060 X 61200.00 Rupees Sixty One No
H 750 Worksurface and 1350 counter made of - Decorative Laminate Particle board Thousand Two Hundred
25mm thick. Inside radius 700.0 mm outside radius – 1350.0 mm Depth – 650 mm. Only
Rubberized cork – 18mm thick. should have Glass Frosted of10mm thick Diamond cut
finishing on edges. Inside Radius – 1202.5mm Outside radius – 1402.5mm Depth –
200mm *Note: Angle sustained within arc surface is 60 deg.Understructure should
have Modesty Panel MS Perforated sheet Below Worksurface : 0.8 mm (thick) x
665.0mm (height) x 1345.0 mm (flat length) Above Worksurface : 0.8mm (Thick) x
260 mm (height) x 1345.0 mm (flat length). Legs MS tube 1.6 mm thick Diameter
mm Height 604 mm.
308 8.00 No Providing and Supplying of Stool Mch Ht Adj + back Hi Base. 1) SEAT ASSEMBLY: 3500.00 Rupees Three Thousand No
The seat should be made up of 1.2±0.1cm thick flat plywood and with moulded Five Hundred Only
Polyurethane foam and should be .upholstered with replaceable synthetic leather
covers.SEAT SIZE: Diameter 40.0 cm ADJUSTMENTS: 360° Revolving type 2)
BACK. ASSEMBLY: The back foam should be designed with contoured Lumbar
support for extra comfort. The upholstery should be available in synthetic leather.
*BACK SIZE: 45.0 cm (W) covered with polyurethane foam 3)HIGH RESILIENCE
(HR) POLYURETHANE. AM:The_HR.polyurethane foam should be _moulded with
density Equal 45 +1-2 kg/m3 and Hardness load 16 ± 2 kgf for 25 Percent
compression4)HEIGHT ADJUSTMENT: The manual height adjustment should be
very easy to operate with a help of a knob.. It can be easily locked at the most
comfortable position. 5)PEDESTAL ASSEMBLY: The five-prong pedestal should be
fabricated from 0.2 ± 0.02 cm :thick HR sheet.( should be :. DD 1079 / HR ), powder
coated ( DFT 40-60 microns ) and fitted with an injection moulded black Polypropylene
Hub Cap and 5 nos. twin wheel castors. The pedestal-should be 55.0±0.5cm pitch-
circle-diameter- (65.0±-1,0cm-with-castors).-Circular-foot-ring of 052.0±0.2cm made
up of 01.9±0.2 x 0.12±0.0096cm thk MS ERW Tube for foot support in High-base
stool. 6)TWIN WHEEL CASTORS: The twin wheel castors should be injection
moulded in Black Nylon. Width- 65.0cm, Depth- 65.0 cm, Height- 88.0cm to 99.5cm
Seat Height- 67.0 to 78.5cm. The rate shall include all materials, hardware, and labour
etc. complete as per instruction of engineer-in charge.
DTP Maternity Home CHC Singvad 62 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
309 100.00 MTRS Medical Grade Copper Pipe Kite marked : as per tender technical specifications 1736.00 Rupees One Thousand MTRS
28mm OD X 0.9mm thick Seven Hundred Thirty
310 25.00 MTRS Medical Grade Copper Pipe Kite marked : as per tender technical specifications 1058.40 Rupees One Thousand MTRS
22mm OD X 0.9mm thick Fifty Eight And Paise
311 38.00 MTRS Medical Grade Copper Pipe Kite marked : as per tender technical specifications 862.40 Rupees Eight Hundred MTRS
15mm OD X 0.7mm thick Sixty Two And Paise
312 25.00 MTRS Medical Grade Copper Pipe Kite marked : as per tender technical specifications 649.60 Rupees Six Hundred MTRS
12mm OD X 0.6mm thick Forty Nine And Paise
313 25.00 NOS Gas Outlet Points/ Terminal Unit : As per tender technical specifications. a.Oxygen as 2912.00 Rupees Two Thousand NOS
er IS/ISO : 2008 IS/ ISO 7396-1 2016 HTM 02-01 ClassII b MDR 2017/745 Nine Hundred Twelve
314 25.00 NOS Matching Probe/adopter As per tender technical specifications. a.Oxygen 784.00 Rupees Seven Hundred NOS
Eighty Four Only
315 2.00 NOS Single gas digital alarm with NIST BS EN ISO 7396-1 2016 . HTM 02-01 part A&B EN 18480.00 Rupees Eighteen NOS
60601 -1 Thousand Four Hundred
316 30.00 NOS Oxygen Flow meter with Humidifier Bottle - As per tender technical specifications as 3584.00 Rupees Three Thousand NOS
per IS/ISO 15002: 2008 +AM 1: 2019 IS/ ISO 7396-1 2016 HTM 02-01 ClassII b MDR Five Hundred Eighty
2017/745 Four Only
317 25.00 NOS Isolation Lockable line valves with stub fittings :As per technical specifications. 15mm 3920.00 Rupees Three Thousand NOS
Nine Hundred Twenty
318 2.00 NOS Isolation Lockable line valves with stub fittings :As per technical specifications. 22 mm 5376.00 Rupees Five Thousand NOS
Three Hundred Seventy
319 4.00 NOS Isolation Lockable line valves with stub fittings :As per technical specifications. 28 6720.00 Rupees Six Thousand NOS
mm Seven Hundred Twenty
320 2.00 NOS 5x5 Oxygen Cylinder Manifold system with header 100800.0 Rupees One Lakh(s) NOS
Eight Hundred Only
DTP Maternity Home CHC Singvad 63 of
Item Quantities Items Description Estimated Rates Unit Total amount
Item Quantities Items Description Estimated Rates Unit Total amount
No. estimated but may In Figures In Words According to
be more or less Estimated
321 2.00 NOS High flow piston Regulator IS/ ISO 7396 IS/ISO 10524-2 -2016 , IS/ISO 10524-4:2008 13216.00 Rupees Thirteen NOS
HTM 02-01 ClassII b MDR 2017/745 Thousand Two Hundred
Total cost of Civil & Electrical+ Fire+ Furniture & interior+ MGPS work Rs.
Rupees Three Crore Eighty Lakh(s) Twenty Seven Thousand Forty Eight And Paise Seventy Three Only
I/We am/are willing to carry out the work at % above/below percent (Should be written in figures and words) of the estimated rate mentioned above. The
amount of my/ our Bid works out as below.
Amount of My / our Tender Work out as under.
* Estimated amount put to Bid ________________________ Estimated amount put to Bid
ADD___________% ABOVE Deduct.___________% below
Nett Amount Nett Amount
* (Please strike out whichever not applicable.)
1) All the works shall be carried out as per public work deptt. and book and other specifications of the division or as directed.
2) All the columns in the contractor be filled in ink and the total entries in the last columns should be struck by the contractor under his signature.
3) Rate quoted include clearance of site ( prior to commencement of work and its close) in all respects and held good for work under all conditions
site moisture weather etc. )
4) GST at 2% Value of Workdone shall be Recovered from Contractors Bill
5) To be continued on additional sheets, if found necessary
Quantity, rates & wording of items are as per estimates and calculation in the schedule " B " are arithmetically checked and found correct.
Deputy Executive Engineer Executive Engineer
Project Implementation Unit Zone-6 Project Implementation Unit Zone-6
DTP Maternity Home CHC Singvad 64 of
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
6372 Make List new.pdf
Annexure-2 Maternity Home CHC Singvad.pdf
BUILDING SPECIFICATION BOOKLET.pdf
DTP Statement Maternity Home CHC Singvad.pdf
ElectricalSpecification.pdf
ELV SPECIFICATION.pdf
GR-Special Conditions All.pdf
Insurance Clause - Inclusion in SBD.pdf
SBD Maternity Home CHC Singvad.pdf
SCH.B Maternity Home CHC Singvad.pdf
Special Conditions of PIU-27-05-2026.pdf
Specification Meternity Home.pdf
Specification of Fire System.pdf
TECHNICAL SPECIFICATION FOR FIRE FIGHTING.pdf
SPECIFICATION INDEX.pdf
Download all tender documents and submit your bid