Construction of Single Classroom School Building at Adhinatham PUM School in Maruthur Town Panchayat

Amount

Name of the Work : Construction of Single Classroom School Building at Adhinatham PUM School in Maruthur Town Panchayat

Earthwork excavation for foundation in alla clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary etc complete complying with standard specification

Supplying and filling in foundation and basement with filling conveyed earth in larges of not more than 15cm thick well rammed watered and compacted including & conveyance and all labour charges etc.,

Cement Concrete 1:4:8 mix using 40mm ISS HBG metal for foundation & flooring including labour charges etc., complete

Brickwork in CM 1:5 mix using country bricks ground maded of size 23 x 11 x 7 cm including cost and conveyance of all materials etc., complete.

Supplying and erecting centering for sides Centering for soffits of RCC slabs of plane surface like lintels, beams etc., including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification.

Verandah Cross Beam

Roof Sunshade

Supplying fabricating and placing in position of ribbed steel rods for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors etc., complete

RCC 1: 1/2 :3 mix using 20 mm ISS HBG metal for RCC items of work excluding items of works excluding centering, shuttering, and ost of reinforcement grill out including curing etc complete and also including fixing fan clamps and ixtures in rcc works wherever necessary as directed by departmental officer etc.. complete

Plastering surfaces of RCC items such as slabs, beams, sunshades with cement mortar 1:3- 10mm thick including packing, providing cement mortar beading for sunshades staircase steps, lands slabs etc. as directed by departmental officers etc, complete complying with standard specifications

Plastering with cm 1:5 mix( one cement and five sand) to 12 mm thick including cost and 9 conveyance of all materials in all floors etc, as directed by departmental officers etc. complete complying with standard specifications

Providing Granolythic floor finish in cement concrete 1:2:4 mix using 10-12 mm ISS metal 10 to 25mm thick including cost and conveyance of all materials to site and all labour charges etc

Supplying and Paving the floor with Double charged Vetrified tiles 0.60mx0.6mx8mm for 11 approved quality cost and conveyance of all materials to site and all labour charges etc

Supply and Delivery Fabrication of MS doors with outer frame and shutter frame in MS angle of size 40mmx 40mm x 6 mm with MS flat 25mm x25mm x 6mm and MS sheet of 18 gauge 12 including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc.. complete

Supply and Delivery Fabrication of MS Windows with outer frame and shutter frame in MS angle of size 40mmx 40mm x 6 mm with MS flat 25mm x25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete

Weathering course with brick jelly lime concrete using 20mm brick jelly withpure lime of 14 32.12.5 including cost and conveyance of all materials to site and all labour charges for mixing, laying and finishing etc complete for 10 cum

Finished with one course of pressed tiles of size 23x23x2cm with cement mortar 1:3 mix and pointed with the same oiled mortar including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm

Distembering two coats of oil bound distember using one coat of primer coat including cost & conveyance to size and all labour charges etc., complete.

Painting two coats with ready mixed Exterior Emulsion paint of approved qualityand colour over a priming coat, including through scrapping, clean removel of dirt etc complete.

Painting two coats of new Iron work with best quality synthetic enamel paint of approved 18 quality and colour with priming coat including the cost all materials etc. complete, in all floors

Painting two coats of Black board with best quality synthetic enamel paint of approved 19 quality and colour with priming coat including the cost all materiais etc., complete, in all floors

Supplying and fixing P.V.C rainwater down fall pipe of 110mm dia with necessary shoes, bends & Clamps etc.,

Supplying and fixing of cudappah slab 38/40mm inciding cost and conveyance and all labour

Providing Cup-board Shutter with frame using termite/water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work.

Electrification Work

Wiring 2x1.5 Sq.m (22/0.30) PVC insulated Unsheathed SC.cu.conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with in flush with wall covered with hylem sheet of 3 mm thick with painting of suitable colouyr for concealed PVC light/fan point (SD No.25)

Supply and fixing of 4'-18W LED tube with fitting inclusive of all charges etc

Supply and fixing of water tight Bulk Head fitting with guard (Philips/Bajaj /Crompton/Klite) suitable for incandencent lamp and 60W bulb (SD NO.83)

Supply and run of 2 of 1.50 Sq.mm polythene insulated PVC sheathed heavy duty SC Copper 5 conductor of 1100 V grade on 7/20 GI bearer wire for service connection mains (SD No.64)

1200mm (48) AC ceiling fan AC ceiling fan complete with stepped electronic 300 W regulator and 300mm down rod on the exising clamp -SD106

GST Amount for providing Service to Government Contract Works for the above ConstructionWorks. GST Amount is the Total GST Amount for overall quoted amount above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

M SENTHILKUMAR