Providing and Fixing Roofing Shed including mis civil works at vyara divisional store office under Vyara Division of Surat-R Circle, DGVCL

Name of work :- Providing and Fixing Roofing Shed including mis civil works at vyara divisional store

office under Vyara Division of Surat-R Circle, DGVCL

Description Qty. Unit Rate Amount

Demolition including stacking of serviceable materilas

1 and disposal of unserviceable materials with all lead 3.00 CMT 1073.56

and lift. (i) R.C.C. work

Demolition of Brick work and stone masonry including

stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.(ii) In

Providing and laying controlled cement concrete M.250

exposed work with curing etc. complete including the cost of

3 formwork but excluding the cost of reinforcement for R.C.C. 5.75 CMT 10163.67

work in (B) COLUMNS: (iii) Having cross-sectional area more

than 0.08Sq.M and upto 0.18 Sq.M

Providing TMT Bar FE 500D reinforcement for R.C.C.

4 work including bending, binding and placing in position 575.00 KG 76.52

complete upto floor two level

Do as Above ….brick work in superstructure above plinth

level upto any floor level (C) Fly Ash Bricks

Providing 15mm thick cement plaster in single coat on

Rough (Similar)side of single or half brick walls for

6 interior plastering upto floor two level and finished 50.00 SMT 192.12

even and smooth in (i) Cement mortar 1:3 (1-

20mm thick sand faced cement plaster on walls upto

height 10 metres above ground level consisting of

7 12mm thick backing coat of C.M. 1:3 (1-cement : 3- 50.00 SMT 334.18

sand) and 8mm thick finishing coat of C.M. 1:1 (1-

cement : 1-sand) etc. complete.

Providing and laying broken chine mosaic flooring using

brick bats 25 to 100mm size with 50 % of C.M. 1:4 (

cement : 5 coarse sand ) admixed with water proofing

compound for terrace using 12 mm to 20 mm broken

8 pieces of glazed tiles to be laid over cement mortar 1:3 370.00 SMT 1324.05

to plain or slope and to be tempered to bring mortar

creme out upto surface using white cement including

rounding off junctions and extending them upto 15 cm

along the wall,clearing with water and oxalic acid etc.

Description Qty. Unit Rate Amount

Providing and applying Primer coat and Finishing wall

with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even

shade after thoroughly brushing the surface to remove

all dirt, and remains of loose powdered materials.etc

Providing and fixing of Ridge flashing for roof panel

shall be made out of 0.5 mm thick pre coated GI

sheet . The Precoated sheet shall be of minimum

mpa steel grade confirming to IS 14246:1995 and shall

have zinc coating of minimum 120 gsm as per

IS:277:1992 , 5-7 microns epoxy primer on both side of

the sheet and polyester top coat 15-18 micron. The

10 PPGI Sheet shall have plastic protective guard film of 430.00 SMT 858.80

minimum 25 microns to avoid scratches during

transportation. The ridge shall be fixed to the steel

members by pop rivet or self drilling/self stitching

fastners @ maximum 450 mm c/c along length of

capping/flashing etc complete . (Note - for payment the

measurement of area shall be that of actual net area of

Providing and fixing of Ridge flashing for roof panel

shall be made out of 0.5 mm thick pre coated GI sheet.

The Precoated sheet shall be of minimum 240 mpa

steel grade confirming to IS 14246:1995 and shall have

zinc coating of minimum 120 gsm as per IS:277:1992

5-7 microns epoxy primer on both side of the sheet and

11 polyester top coat 15-18 micron. The PPGI Sheet shall 24.00 RMT 515.28

have plastic protective guard film of minimum

microns to avoid scratches during transportation. The

ridge shall be fixed to the steel members by pop rivet

or self drilling/self stitching fastners @ maximum

mm c/c along length of capping/flashing etc complete .

Structural steel work ( Confirming to IS 4923-1997)

riveted, bolted or welded in builtup for all type sections,

in framed work, including cutting, hoisting, fixing in

12 position and applying a priming coat of approved steel 10100.00 KG 129.85

primer all complete as per the structural designs and

directions of Engineer in charge.Column ( 122 x 61 x

Supplying, installing, testing and commisioning of

Stainless steel blades Turbo Air Ventilation of size (24 x

13 33 Inch), Height of Ventilator 450 mm, No of Vanes 42 4.00 NO 9171.00

with FRP roofing sheet and Dom including all.

Miscellaneous expense for unforseen work which shall

be paid as per SOR Rate. Rate for Non SOR item shall

be paid at approved rate analysed by EE Civil & DE

Total Amount Excl. GST

Total Amount Excl. GST

"All royalties, toll tax, local tax, development charges, and any other taxes etc., in respect of this contract and also

any statutory variation in future towards above mentioned taxes & any other taxes if levied in future by statutory

authority applicabl

The Contractor has to pay 1% Labour Welfare Cess of estimated cost to the concern Government Department.

Description Qty. Unit Rate Amount

The contractor shall produce the receipt of payment of 1% welfare cess from the respective govt. department before

submission of final bill, otherwise final bill for the works will not be finalized.

The proof of payment made by the contractor to the appropriate department shall be submitted to DGVCL, failing

which appropriate amount shall be withheld on getting information/instruction from the concerned department.

I /We agree to carry out the above work at

Add (+)________% above . Rs.

Less (-) _________% below Rs.

Total cost of work. Rs.

(Total cost of work Rs. ______________________________

Signature of Tendered CEO & SE (O&M)

Seal of company DGVCL,Circle Office Surat-R