DAY TO DAY MAINT OF TARGETS LBT PBT GT ETC AND REPAIR REPLACEMENT CLEANING OF SEWAGE LINES MANHOLES GULLY TRAPS AND MISC WORKS AT SK RANGE UNDER GE (AF) HALWARA

Amount

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone masonry and precast concrete articles all as specified.

Taking down of cement plaster on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water complete all as specified.

Brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6 M mean radius built in CM 1:6 complete all as specified.

All as per Sl item No 3 above but except bricks. Note : Serviceable bricks obtained from demolition shall be reused in the work after cleaning.

Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surface & finished even and smooth without using extra cement complete all as specified.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

Leveling of bomb exploded area by cutting/ filling of ground in layers any depth of filling below ground level and finishing to required surface, ploughing tillers, levelling and marking furrows in the existing site of target area (Depth of ploughing/furrowing shall be as approved at site) as per required gradient & shape including removal of grass, shurbs, rubbish etc away from the end of target area as required from out side of target area all as directed by Engr-in-Charge. Note : Unit rate quoted by the contractor shall deem to include T&P comprising of tractor one or more as required at site (not less than 50 HP such as Swaraj 855, HMT 5911, Farmtract, Ford 3620, Sonalika Arjun or equivalent as approved by GE) and agriculture instrument with crew of driver, helper and extra labour if required. Payment shall be made on the basis of hours of working recorded in the log book duly maintained and signed by the Contractor, JE, Engr-in-Charge and users. Hours meter should be serviceable/ in working condition. Work shall be carried out as and when required.

M&L Preparation of old painted surfaces of concrete/road exceeding 10cm width or girth and applying one coat of road marking paint (fluroscent paint) white/golden/yellow for marking dashes, arrow, pyramid base line, foul line & fire line etc) complete all as specified and directed.

M&L for filling lime class "B'' confirming to IS 712-1984 in target area at the early morning i.e before 0630 AM or as and when required for night firing @ 350 Kg per day (minimum) including spreaiding & leveling complete all as specified and directed by Engr-in-Charge.

Removing of any cover (CI or RCC) opening any type of ractangular/circular, septic tank/ soakage well of 25 to 50 users capacity and bailing out (dewatering) of water, sewage (sludge),liquid, semi liquid and soild suspemded contents, and floating atters by MECHANICAL PUMPING ONLY by plugging inlet as required: desludging and getting out mud/sludge/silt/clay, sand and and all other foreign organic and inoganic material and removing outside cantonment area up to a distance of 1.5 kms deposited where directed in barrow pits and covering the buried pit with 15cm thick layer of earth/soil and re-fixing the covers to its original position all as directed by Engr-In-Charge and making sewage system such as septic tank,soakage well, sewage plants/sumps fully functional to the entire satisfaction of Engr-in-Charge. NOTE :- 1 Working in foul condition. 2. Work shall be carried out as and when required. 3. Work will done only when one supervisor is present on site who will be responsible for ensuring safety of the labours engaged.

Rough excavation n. exc. 1.5 m deep and getting out in soft/ loose soil complete all as specified.

Excavation in trenches not exc 1.50m wide and not exc 1.50m in depth for foundations etc for shafts, wells, cesspits, maholes, sewage lines etc in solft/loose soil and getting out complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 15cm thick complete all as specified and directed.

Removing excavated material exc 500 m but n. exc. 1.5 KM and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified.

HDPE (white) bag of size 84 cm x 36 cm conforming to IS-6192-1994 duly filled with earth/sand complete all as specified.

Labour only for screening of sand upto depth of 0.50m removing of all foreign materials, metals, pebbles etc and again spreading and levelling of sand to ture surfaces in gunner target area including removal of all rubbish away from target area complete all as specified and directed.

Supply, filling spreading and leveling of sand (as per sample) in front gunnery target area all as specified. Note : Deduction for 10% shall be made for bulkage during measurement and payment.

Demolition of reinforced cement concrete (Reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically for, removal of rubbish outside MOD land.

Demolition and breaking up drain pipes 150mm interla dia of pipe (Salt glazed warem, AC or reinforced) set in cement mortar complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically for, removal of rubbish outside MOD land.

Dismantling cast iron work of any description

M&L for providing preceast cement concrete 1:2:4 type B-1 (using 20mm graded agg) as in manhole covers, slabs etc including set in cement mortar 1:4 complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.

M & L for providing cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregates, as in bed for 150 mm bore pipes including packing under the hauching against the sides of pipes after they are laid and testing complete all as specified and directed.

S&F reinforced cement concrete pipe 150 mm bore, class NP-3 laid in trenches and jointed as specified.

Removing the manhole cover (CI or RCC) opening any type of manhole rectangular/circular of depth not exceeding 3m, taking out liquid/sludge/solid contents from the manholes/sewage line of any bore pipe by mechanical pumping making it fully functional to the entire satisfaction of Engineer-in-Charge including removal of sludge / solid contents outside the cantonment area and re-fixing the manhole cover to its original position complete all as specified and as directed for 100mm bore pipe line. Note : (i) Length of pipeline shall be measured from centre to centre of manhole and cleaning manholes is inclusive in cleaning pipe line. (ii) Contractor has to provide all necessary safety wears & protective equipment to the labours engaged. (iii) Work will done only when one supervisor is present at site who will be responsible for ensuring safety of the labours engaged.

Easing, adjusting, straightening of members and repairs/welding, greasing etc to steel gates of area exc 3.00 sqm but not exc 5.00 sqm each leaf for noise less operation complete all as specified and directed by Engr-in-Charge.

S&F MS work as in fencing post and struts including cutting tops to shape as directed ,including imbeding in concrete and all necessary drilling holes,bolting or riveting,welding,notching for wire etc and similar work conforming to grade Fe -290 Gde E-165 complete all as specified and directed.

M&L for cement concrete type C1 (1:3:6) using 20mm graded crushed stone aggregate as in coping, fixing posts or similar work etc all as specified and directed

S&F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

Fixing only in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

M&L for preparing of new steel surface of any description not otherwise described over 10cms width or girth and applying 2 coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L for preparing of old painted steel surface of any description not otherwise described over 10cms width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone agg) as in sub base all as as specified and directed.

M&L for 60mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 , M-35 grade laid over and including 25mm thick sand cushioning complete all as as specified and directed.

M&L for chequerred cement concrete tiles 20cm x 20cm x 25mm thick , set jointed and pointed in neat cement slurry with grey cement and pigments in floors laid over and including screed bed 15mm in CM 1:4 complete all as specified and directed.

M&L for repairing gear operated rolling shutter of any size including taking down, minor weldings, straightening, easing, adjusting, greasing and making good the disturbed surfaces and refixing the same after repair complete all as specified and directed by Engr-in-Charge.

All as per Sl item No 37 above but Manual Operated

S&F in repairs spring of manually operated rolling shutters complete all as specified and directed.

JINDAL AND COMPANY