KTPP

Clearing the Structural Steel Scrap Tree branch, Scrap Debris for the construction of building including all conveyance, leads & lifts,labour charges, incidental charges etc., complete for finished item of work as directed by the Engineer-in-charge. (Hiring of Hydraulic excavator for 3 hrs is considered as 1 Job).

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting, etc., complete for finished item of work excluding dewatering charges etc., as per SS - 20 B (APSS 308) complete for finished item of work as directed by the Engineer-in-Charge at site

Laying P.C.C (1:3:6) Nominal mix using 20mm size HBG machine crushed metal including cost and conveyance of all materials like sand, coarse agreegate, machine mixing, placing in position,tamping, labour, operational & incidental charges, curing, all leads and lifts (excluding seigniorages on material) etc. complete for finished item of work as directed by the Engineer-in-charge at site and as per standard specifications

Laying of RR Masonry in CM(1:6) using Coursed Rubble stones and Rough stones including cost and conveyance of all materials at site (excluding seigniorages on material), labour charges, curing and all leads & lifts etc., complete for finished item of work as directed by the Engineer at site.

Construction of brick masonry in CM (1:4) using fly ash bricks of size 230x110x70 mm, including cost and conveyance of all materials (except cost of fly ash bricks and seigniorages on material) with all labour charges for curing, scaffolding charges, all leads and lifts etc., complete for finished item of work and as directed by the Engineer-in-charge. ( Fly ash bricks will be issued by TGGENCO free of cost).

Constructing 457.2mm x 457.2mm inspection chamber in brick masonry in CM(1:6) up to 914.4mm (3'0") depth and fitted with light weight 457.2 mm x 457.2mm (1'6"x1'6") C.I frame and cover of 20 Kg including cost and conveyance of all materials, all labour charges etc., complete for finished item of work as per standard specifications and as directed by the Engineer-in-Charge ( Fly ash bricks will be issued by TGGENCO at free of cost at KTPP departmental stores

Providing high yield strength deformed (HYSD) / Thermo Mechanically Treated (TMT) bars (Fe 415/ 500/ Fe 550 grade as per IS 1786 -1979) of different diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying, lap splicing with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings,conveyance of steel to site, all wastages such as overlaps, couplings, chairs, spacer bars, cost and conveyance of binding wire, cover blocks, all incidental, operational charges etc., complete for finished item work at all heights as per standard specifications and as directed by the Engineer-in-charge. (Reinforcement Steel will be issued by TGGENCO at free of cost at departmental stores at KTPP).

Providing and placing of M20 Concrete for LINTELS corresponding to IS 456 using MIXER with 20mm & 12mm size 50% each machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like fine aggregate (sand), coarse aggregate etc., (except cost of seigniorage charges on materials) to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete with minimum cement content of 330 Kg including centering, shuttering, laying concrete, vibrating, curing etc., complete for finished item of work and as directed by the Engineer-in-Charge.

Providing and placing of M20 Concrete for SUNSHADE corresponding to IS 456 using MIXER with 20mm & 12mm size 50% each machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like fine aggregate (sand), coarse aggregate etc., (except cost of seigniorage charges on materials) to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete with minimum cement content of 330 Kg including centering, shuttering, laying concrete, vibrating, curing etc., complete for finished item of work and as directed by the Engineer-in-Charge.

Providing and placing of RCC M- 20 Nominal mix for Cover Slabs of Septic Tank (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm and 12mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site (except cost of Seigniorage charges), sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering., complete for finished item of work as per standard specifications and as directed by the Engineer in charge at site

Toilet Room PVC Door Frame-Providing and fixing Rajshri or equivalent make factory made polyvinyl chloride (PVC) door frame of the size 50x47 mm rigid thickness of 5 mm made out of extruded 5 mm rigid PVC foam sheet mitre cut at two corners and jointed with 2 Nos of 150 mm long bracket of 15x 15 mm MS square tube. The two vertical door profiles are to be reinforced with 19x 19 mm MS square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100 mm long MS Screws, through the frame by using fasteners. A minimum of 4 Nos of screws to be provided for each vertical member & minimum 2 Nos for horizental member etc., complete as per manufacturers specification and direction of engineer-in-charge for finished item of work as directed by the Engineer-in-Charge. Door - 0.75mx 2.1 m (Single leaf Door Frame) PVC Doors Terms of Payment

Toilet Room- PVC Door Shutter - Providing and fixing 30 mm thick solid panel consisting of frame made out of MS tubes of 19 guage thickness and size of 19 mmx 19 mm for stiles & 15 mm x15 mm for top and bottom rails. MS frame shall have a coat of top steel primers of approved make and manufacture MS frame shall be covered with 5 mm thick heat moulded PVC 'C' channel of size 30x50 mm forming stiles, and 5 mm thick, 75 mm wide PVC sheets for top rail, lock rail and bottom rail on other side, and 10 mm(5 mmx 2) thick 20 mm wide cross PVC sheet as gap insert for top rail and bottom rail panclling of 5 mm thick PVC sheet to be fitted in the MS frame welded/scaled to the stiles and rails with 30 mm widex5 mm thick PVC sheet beading on either side and joined together with solvent cement adhesive etc. An additional 5 mm thick PVC stripe of 201 mm width is to stuck on the interior side of the 'C' channel using PVC solvent adhesive and including all necessary accessories and fittings of approved standard quality such as 1 No. Aluminium tower bolt - 200 mm long, 1 No. Aluminium Aldrops - 250 mm long, 3 Nos MS Powder Coated Butt Hinges-100 mm, 2 Nos Aluminium handles 125 mm long, labour charges etc., complete as directed by the Engineer-in-Charge. For door of size: 0.75m x 2.10 m (Single leaf Door Shutter

Main Door-Toilet Room - PVC Door Shutter - Providing and fixing 30 mm thick solid panel PVC shutter consisting of frame made out of MS tubes of 19 guage thickness and size of 19 mmx 19 mm for stiles & 15 mm x15 mm for top and bottom rails. MS frame shall have a coat of top steel primers of approved make and manufacture MS frame shall be covered with 5 mm thick heat moulded PVC 'C' channel of size 30x50 mm forming stiles , and 5 mm thick, 75 mm wide PVC sheets for top rail, lock rail and bottom rail on other side, and 10 mm(5 mmx 2) thick 20 mm wide cross PVC sheet as gap insert for top rail and bottom rail panclling of 5 mm thick PVC sheet to be fitted in the MS frame welded/scaled to the stiles and rails with 30 mm widex5 mm thick PVC sheet beading on either side and joined together with solvent cement adhesive etc. An additional 5 mm thick PVC stripe of 201 mm width is to stuck on the interior side of the 'C' channel using PVC solvent adhesive and including all necessary accessories and fittings of approved standard quality such as 1 No. Aluminium tower bolt - 200 mm long, 1 No. Aluminium Aldrops - 250 mm long, 3 Nos MS Powder Coated Butt Hinges-100 mm, 2 Nos Aluminium handles 125 mm long, labour charge etc., complete as directed by the Engineer-in-Charge. For door of size: 0.9 m x 2.10 m (Single leaf Door Shutter)..

Main Door Rest-Room :-Doors Frames (Colour Coated Steel Sections) & Shutter using Cement Bonded Particle Board as per IS 14276 (Cement Bonded Particle Board conforming to IS 14276 or equivalent ) : Providing and fixing of door frame made from cold roll formed sections made of galvanized (Base steel as per IS277 with zinc of 120 Gms/sqm) colour coated steel sections with total coated thickness of 1mm, primer coated with epoxy primer coat of 5-7 microns thick, finish paint with polyester paint of 12-16 microns. The Section for door frame is to be filled with polyurethane (P.U) form of 40kg/m3. Overall size of frame section should be of 50mm x 50mm. With necessary corner brackets, stiffeners, hinges, and screws. Cement Bonded particle board shutter (Cement Bonded Particle Board conforming to IS 14276 or equivalent )Single Leaf” with all round style’s #U” section of size 12m x 18m x 12mm made from 0.6 mm thick galvanized, colour coated cold rolled steel profiles with 16mm thick Cement Bonded particle Board (Cement Bonded Particle Board conforming to IS 14276 or equivalent ) with necessary screws fixed at every 1’-0” (304.8mm) intervals. The cost inclusive of MS nickel coated Aldrops of size 250mm long 2nos. 200mm long tower bolt 1no., 125mm handles 2nos., cost and conveyance of all materials at site and applying one coat primer , one coat of luppam and two coats of synthetic enamel paint as per approved design for finished item of work

Providing, supplying & fixing of Top hung Ventilator with Exhaust Fan Provision made out of multi chambered UPVC sections with TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC and reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall size of 60mm x 55 mm x 2.40 mm with reinforcement of 1 mm thickness, Mullion with overall size of 74 mm x 60 mm x 2.40 mm with reinforcement of 1mm thickness and Sash with overall size of 75mm x 60 mm x 2.40 mm with reinforcement of 1.0/1.2 mm thickness. (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin). Glazing bead for fixing of glass shall be of size 34x20 mm coextruded with soft PVC gasket. Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware, single point locking using cockspur handle and friction stays. Wall thickness of frame, mullion and sash shall be 2.4 mm including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work as directed by the Engineer-in-charge

Fabrication and fixing in position of Structural steel, all labour charges, all leads and lifts, cost of all consumables like electrodes, gas etc., and hire charges of all equipment and T&P required for the work inclduing welding, cutting, drilling of holes in columns/Brick walls to fix the M.S frame to columns/walls, etc., including painting with two coats of synthetic enamel paint (Grade-I) over one coat of red oxide primer (Grade-I), all incidental charges, etc., complete for finished item of works directed by Engineer-in-charge. (Structural Steel will be provided by the Department at free of Cost

Supplying and fixing of roofing sheet with pre-painted galvalume trapezoidal profile sheets of 0.50mm thickness, coating with Alu-Zinc AZ150 GSM, Tensile strength: 550 MPA, Paint coating: Regular modified polyester painting, painting thickness (top): 18 to 20 microns, (bottom): 5 to 7 microns, sheet width: 1.02m, length: maximum 12m with regular range colours including cost and conveyance of all materials, bolts and nuts required for fixing, overlaps, labour charges, incidentals and operational charges etc complete for finished item of work as per standard specifications and as directed by the Engineer-in-charge

Plastering with cement mortar (1:3) 12mm thick for brick masonry walls, including cost and conveyance of all materials at site, excluding seigniorage charges on materials etc. on materials including all labour, scaffolding charges, curing, all leads & lifts at all elevations, etc., complete for finished item of work for all floors as directed by the Engineer-In-Charge.

Plastering with cement mortar(1:4), 20 mm thick for brick masonry walls, and sponge finishing, including cost and conveyance of all materials at site, excluding seigniorage charges on materials,including all labour, scaffolding charges, curing, all leads & lifts at all elevations, etc., complete for finished item of work for all floors as directed by the Engineer-in-Charge

Painting to Internal walls with 2 coats of acrylic emulsion paint interior grade over 1 prime coat of approved brand of ISI make Asian or Berger and shade over existing paint surface after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as directed by the Engineer-in-charge

Painting to External walls with 2 coats of acrylic emulsion paint exterior grade over 1 prime coat of approved brand of ISI make Asian or Berger and shade over existing paint surface after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as directed by the Engineer-in-charge

Providing Dadoing to internal walls in toilets with ceramic tiles of size 200x300mm and 6 mm thick of Kazaria/Nitco or equivalant 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of approved colour and finish in all shades and designs, set over base coat of cement mortar (1:3), 12 mm thick with neat cement slurry of honey like consistency spread @3.30kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials except seigniorage charges on material like Tiles, sand, white cement including etc., complete for finished item of work as directed by the Engineer-in-charge.

Flooring with edge cut rectified ceramic glass finish anti skid floor tiles of Kazaria/Nitco or equivalant 1st quality ISI approved make by Engineer in charge with approved colour, shade and design of min.size is 400 mm x 400mm of minimum thickness of 8mm laid set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @3.3kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials except seigniorage charges on material like sand, white cement and tiles, labour insurance and incidence charges etc., complete for finished item of work and as directed by the Engineer-in-charge.

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Engineer-in-charge at site

S&F premium make CPVC Pipes of 15.90mm OD Pipe - SDR 13.5 including the cost of pipe, required number of connectors such as elbows, tees, couplers, connectors, solvent cement etc., and labour charges complete including cost and conveyance of all materials to site, all operational incidental, labour charges, etc. complete for finished item of work as directed by Engineer-in-charge

Supply and fixing of PVC/SWR DRAIN PIPES of the 110 mm dia and 4 kg pressure of Sudhakar make including bends, inspection lid, clamps, fiitings in all heights including Cost& conveyance of all materials such as long nails , horse shoe steel straps etc and labour charges etc complete for finished item of work as directed by the Engineer at site.

Supply and Fixing of Bronze Ball valve with SS Ball and SS Spindle as per IS - 771 Class - I, Indian make heavy type - 15 mm NB Size including cost and conveyance of all materials and labour charges etc complete for finished item of work as directed by the Engineer at site

Supply, Installation and commissioning Hindware make floor mounted Two Piece WC (Slick S Standard Closet)- of size 520 x 360 x 390 mm with P trap, including cistern, seat cover & Supply & fixing of PVC low level system with internal components & short bend: 10 Litres capacity Single Flush, 15 mm CP finish brass concealed Angular wall cock with wall flange, 15 mm brass body premium variety Chromium Plated finish 2-Way Bib cock, 450mm Long braided hose of PVC, Hand /Health Faucet with wall hook & 1.2m hose pipe etc.,along with towel rods , complete for finished item of work as per standard specifications and as directed by the Engineer-in-charge

Providing & fixing 4" (101.6 mm) UPVC Nahany trap of approved make with inlet and jali, fixing with white cement as per site requirements with standard practice including cost and conveyance of all materials, boxing of Nahani traps in all RCC floors where ever required, labour charges, incidental and operational charges etc., complete for finished item of work as per standard specifications and as directed by the Engineer-in-Charge.

Providing and fixing of 15 mm CP finish Bib tap with quarter turn spindle conforming to IS:8931 including cost and conveyance of all materials, labour charges, all incidental and operational charges etc., complete for finished item of work as per standard specifications and as directed by Engineer -in -charge

Providing & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm – Single C.P. Pillar cock, angular cock including cost and conveyance of all materials, labour charges, incidental and operational charges etc., complete for finished item of work as directed by the Engineer-in-charge..

Providing and fixing TV shape mirror with plastic frame of size 609.6 mm x 457 .2 mm including cost of all materials and labour charges complete for finished item of work as directed by the Engineer-in-charge.

Supply and fixing CP finish brass towel rod 600 mm long and 20mm dia with brackets including cost of all materials and labour charges complete for finished item of work as directed by the Engineer-in-charge..

Supply and fixing 15 mm CP finish brass concealed stop valve of not less than 400 grams weight with adjustable wall flange and quarter turn spindle conforming to IS 8931 including cost of all materials and labour charges complete for finished item of work as directed by the Engineer-in-charge

Providing and fixing Thermocole False ceiling in true horizontal level 600 mm x 600 mm using 15 mm/ 19 mm thick Thermocole sheet anodised Aluminium Tee sections of size 24.50 mm x 24.0 mm x 2.4 mm in grid with cross tee of size 24 x 24.5 mm at every 600 mm c/c and anodised aluminium wall angle of size 24 x 24 mm fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick GI Wire for finished of size 600 x 600 mm including cost & conveyance of all materials and labour charges such as cutting, fixing of standing of frame work exposing roof making complete for finished item of work as directed by the Engineer-in-charge

Supplying & fixing of white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader fixed with screws complete Indian make : 410 x 265 x 305 mm & HPL compact board urinal Partitions with all necessary fittings such as brass body CP spreader, CI floor traps 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practice for nominal dia 75 mm (3") and grating size 100 mm dia of weight not less than 4.0 Kgs including cost and conveyance of all materials, leads and lifts, labour charges, incidental charges if any etc., complete for finished item of work as directed by the Engineer-in-charge

Providing and fixing of Plumbing items i.e., 15 mm nominal size Chromium plated finish brass overhead shower arm of 450 mm long with 90- degree bend & wall flange suitable for rain shower and with 10 years warranty, 15 mm nominal size 152.0 mm CP finish iron body shower rose, CP finish brass soap dish, Diverter Valve with all necessary fittings including cost and conveyance of all materials, leads and lifts, labour charges, incidental charges if any etc., complete for finished item of work as directed by the Engineer-in-charge

Providing of Polished black Kadapa slabs of all sizes between 25 – 30 mm thickness inside Rest room for Dozer Operators including cost and conveyance of all material, labour charges, all incidental charges etc., complete for finished item of work as directed by the Engineer-in-charge at site

Providing & Fixing of Electrical Items Such as Junction Box- 4 nos, L Bend- 10 nos, PVC pipe 8-nos, Fan Dimmer- 2 Nos, 6A Switch-20 Nos, 16A Switch-4 Nos, 6A Socket -6 Nos, 16A Socket - 4 Nos, 32 A- 4 Pole-MCB- 1No, 16A-1 Pole MCB-2 No, 6A-1 Pole-MCB-3 nos, Wire-1.5 sqmm (Red & Black)- 2 nos, 1.0 sqmm (Green)-1 no, 2.5 sqmm (Red)- 1 no, 12 modular-1no, 6 modular- 1 no, 4 modular-1 no, 3 modular 1 no, MCB Distribution box- 1 no, Earth pit complete set- 1 no, Exhaust fan- 2 nos, Round Sheet- 10 nos, Ceiling rose-5 nos, Angle Holder 5 nos, required for the Rest-Room & Toilets including cost and conveyance of all material, labour charges, all incidental charges etc., complete for finished item of work as directed by the Engineer-in-charge at site