Repairs and maintenance to Inspection Quarters at Vellayambalam , Trivandrum including polishing of furniture, providing new cushions to chairs and supplying new beds and pillows

Amount

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : (a)One or more coats on old work.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : (a)One or more coats on old work.

French spirit polishing : (a)One or more coats on old work.

Terrace cleaning by using pressure pump for complete removal of fungus before applying water proofing compound including all materials and labour .

Renewing glass panes, with wooden fillets wherever necessary : (a)Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. (a)10 litre capacity - White

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :(a)White solid plastic seat with lid

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

15 mm nominal bore

25 mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions :(i)45 cm length (a)15 mm nominal bore

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :a)100 mm diameter

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. (a)15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 (a)15mm nominal bore

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. (a)Flexible pipe (i)32 mm dia

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: (a)15 mm nominal bore.

Providing and fixing CP brass grating of standard design and approved make: (a)100 mm dia

Replacing brass spindle for brass tap, pillar tap etc including necessary washer etc all complete

Brass/ CP brass

CP brass pillar tap

Repair of PVC flush tank including replacing of syphon or float etc complete

Cleaning of sytex tank of various capacity over the terrace floor level, including bailing out the water, removing silt, cleaning with approved disinfectants etc. as directed by Engineer-in-charge a)500 litre capacity

Providing and fixing PVC cover ( approved quality) suitable for syntex water tank with necessary fittings etc. complete as directed by the Engineer-in-charge at site.

Checking and attending minor repair work of plumbing and minor repair repair work of floors around W/C , wash basin . Sink etc including cost of materials as directed by the Engineer- in- charge.(a) Plumber

Checking and attending minor repair work of wood work and Easening of door/window shutter including taking out the shutter, refiixing after necessary repairs including the cost of screws, beadings etc as directed by the Engineer-in- charge(a) Carpentor

Cleaning of toilet walls. Floors, water closets, wash basins, urinals etc by using cleaning detergents and cleaning of floors in all rooms, sunshades, terrace etc as directed by the Engineer-in-charge including cost of all materials.(a) Coolie

Providing and fixing health fucet of approoved make including making connections etc.(a) 20mm nominal bore

Pressure grouting with non shrinking pressure grouting admixture Fosroc Cebex 100 @ 250 grams/ bag of cement at all the water dripping areas, construction joints, and other highly pores areas minimum 30 cm interval as directed by the Engineer-in-charge at site.

Water proofing with elastomeric water proofing coating based on synthetic resin emulsion of make Dr. Fixit roof seal on well cleaned open terrace as per manufactures specification and allow drying completely etc. as directed by the Engineer-in-charge at site.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area2.5 sq.meters and under, including cutting the patch in proper shape,raking out joints and preparing and plastering the surface of the wallscomplete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge: a)a) With cement mortar 1:4 (1 cement : 4 fine sand)

Cleaning sump by bailing out water , removing the silt and cleaning with approved disinfectants etc all complete as directed by the Engineer-in-charge at site. (a)5.00 X 3.75 X 3.60 M

Replacing damaged nylone net by new material including EPDM rubber gasket and nobs etc all complete as directed by Engineer-in-charge at site.

Repairs to CP brass door locks including replacing of minor parts etc all complete as directed by the Engineer-in-charge at site.

Supplying bed ( 1.90 X 1.10 x 0.10 m) and pillow of approved make and quality with foam filling type including cost of loading , unloading and transportation etc complete as directed by the Engineer-in-charge at site.

Removing the damaged setty cushion works and reworking with new U foam and textile fabric of appoved make and quality including all materials and labour as directed by the Engineer-in -charge at site.

Three seater setty

Single seater setty

Single seater chair/ Dining chair.

Dry cleaning the existing shabby curtain cloths, neatly ironed and refixing the same without causing any damages to the curtain etc all complete as directed by the Engineer-in-charge at site.