Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance 163 B 2 CHOWDHURY ROAD BARDDHAMAN | BARDDHAMAN | BARDDHAMAN | WEST BENGAL | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
Tender Value
₹7.1 L
EMD Value
₹14,500
Closing Date
5 Sept 2023, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AEE (C), IWD on behalf of IISER Kolkata
IISER Kolkata, IWD Section, Mohanpur 741246 Dist. Nadia, West Bengal
Construction of aluminium partition room in the third floor of Lecture Hall Complex of IISER Kolkata
2023_IISER_767257_1
IISER-K/Civil/22-23/07
Open Tender
Civil Works
Item Rate
60 days
IISER Kolkata, Mohanpur
As per tender document
9 documents required · 9 mandatory
₹500
IISER KOLKATA
₹14,500
21 Sept 2023
17 Aug 2023
8 Sept 2023
17 Aug 2023
5 Sept 2023
17 Aug 2023
Amount
Providing and fixing colour anodized glazed aluminium work for partition made up with 1.5 mm thick aluminium tubular section 2.5" x 1.5"as frame, fixed with rawl plugs and screws etc. including cleat angle, aluminium snap beading for glazing/ panelling, with fixing clip or with expansion hold fastners including necessary filling up of gap at junctions at top, bottom and sides with required PVC/ neoprene felt, rubber gasket along with aluminium beading, taper clip of required section etc., panel to be covered with 9 mm thick both side prelaminated particle board including rubber gasket and taper clip etc. all complete as per direction of Engineer-in-charge.
Providing and fixing colour anodized aluminium work for door shutter, frame made up with 1.5 mm thick aluminium tubular section 1 3/4"x1 3/4" as vertical member, top and middle section - 2"x1 3/4", bottom section 4"x 1 3/4" and with fixing clip or with expansion hold fastners including necessary filling up of gap at junctions at top, bottom and sides with required PVC/ neoprene felt, rubber gasket along with aluminium beading, taper clip of required section etc., 9 mm thick both side prelaminated board including rubber and taper clip and ISI marked SS hinge, rolling wheel, G channel, 6"aluminium handle, locking arrangement with conceal lock etc. all complete as per direction of Engineer-in-charge. i) Door shutter (sliding/hinged).
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3):1996 (Boards with BIS certification marks)
SAMPRITI ENTERPRISE
D. Enterprise
SS ENGG ENTERPRISE
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .