Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.0 LAccepted-AOC RADHAKRISHNA MORE | L1 | Accepted-AOC lowest | |
| 2 | L2₹49.6 L+₹61,749.54 (1.26%)Rejected-Finance GARIKHANA BARAKAR ROAD PURULIA P S PURULIA TOWN DIST PURULIA PIN 723101 | PURULIA | PURULIA | WEST BENGAL | 723101 | L2 | Rejected-Finance 2nd lowest | |
| 3 | L3₹50.0 L+₹98,499.89 (2.01%)Rejected-Finance | L3 | Rejected-Finance 3rd lowest |
Tender Value
Refer Docs
EMD Value
₹1.0 L
Closing Date
12 Apr 2024, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Executive Engineer, PMD,PHE.Dte
Office of the Executive Engineer Purulia Mechanical Division,PHE.Dte Ranchi Road,Purulia.
Supply, delivery and installation of Centrifugal pumping machinery with other allied work for direct pumping at Mahara (Zone III) of Augmentation of Bongabari water supply scheme under Purulia Mechanical Division, PHE Dte.
2024_PHED_681655_27
22/ EE/PMD/PHED OF 2023-2024
Open Tender
MECHANICAL
Item Rate
120 days
Purulia
Please refer Tender documents.
5 documents required · 5 mandatory
₹1.0 L
Yes
30 Sept 2024
12 Mar 2024
15 Apr 2024
12 Mar 2024
12 Apr 2024
12 Mar 2024
Amount
Supply, delivery at site and storage of horizontal multistage centrifugal pump with common base plate for pump and motor, flexible coupling, coupling guard foundation bolts etc. as per IS :9137 & following specification. Pump efficiency should be greater than 65 % and RPM (Syn) should not be more than 1500. Casing -CI, Impeller-Bronze, Shaft-SS410, shaft sleev- SS410, Wear ring: Bronze, Suction- flooded type, (TC, GC & Curve Chart and MOC issued by manufacturer are to be submitted at the time of delivery) (Mateials should be supplied after taking approval from department) a. Capacity : 42 M³/Hr. Generated Head : 30 MWC. Suction/delivery nozzle size: 100mm/65mm.
b. Capacity : 28 M³/Hr. Generated Head : 55 MWC. Suction/delivery nozzle size: 80mm/65mm.
Supply, delivery at site and storage of horizontal foot mounted TEFC squirrel cage induction motor of IE4 class suitable for above pump sets having adequate margin on BKW over the pump BKW and as per following specification. Power Supply: 415V+/-10%, 50HZ ± 6%, 3 Phase, Duty cycle-S1, Insulation- class F, IP55, Temp rise limited to class: B, Motor ( IS 325) should be efficiency class: IE4 . Motor power should be 15%-20% over the pump HP at duty point. Ambient temp: 50°C, Speed: 1500 rpm as sync, Method of Stating: Star delta stating, (TC, GC & Curve Chart and MOC issued by manufacturer are to be submitted at the time of delivery) (Mateials should be supplied after taking approval from department) a. Motor rating- 7.5 KW.
b. Motor rating- 9.3 KW.
Supply, delivery at site and storage of following valves & pipes as per specification: (TC & MOC issued by manufacturer are to be submitted at the time of delivery) (Mateials should be supplied after taking approval from department)
Cast iron double flanged Non- Rising Spindle Sluice Valve generally confirming to IS 14846 having body door /dome/Bonnet and cover of cast Iron Gr FG 260, Spindle of IS 6603, Gr-12 cr-13, spindle nut & seat rings are of Gunmetal as per IS:318 LTB 2. Flanges flat faced and drilled to IS:1538 Part IV & VI, Valves are suitable for maximum working pressure of 10/16 kg/sqcm (seat test) and body tested to 15/24 kg/sqcm 350 NB and above valves should be provided with enclosed gear box and antifriction device for ease of operation. All the valves should be tested by closed end method only. PN 1.0 ratings. DN 125 mm (for Invididual pump suction line)
DN 100 mm (for Invididual pump suction line)
DN 80 mm (for common header delivery )
Cast iron double flanged single door swing non-return valve generally conforming to IS:5312 Part I, having body, door, cover in graded cast iron to IS:210 Gr.FG200, body and door rings & bearing block of leaded tin bronze to IS:318 Gr.LTB 2 (350mm & above), hinge pin of st.st.AISI410, valve suitable for a maximum working pressure of 10/16 kg/cm2 (Seat test) & body tested to 15/24 kg/Sqcm. PN 1.0 ratings. DN 80 mm (for Invididual pump delivery line)
Cast Iron wafer type Butterfly Valve generally as per BS-5155, having body of cast iron as per 1S:210 gr. FG-260, disc of SS Gr CF-8, Shaft of St.steel AISI-410, ‘O’ ring for shaft seal of Nitrile rubber, valves are suitable for PN 1.0 rating. Valves are operated by suitable RotorkK.range (three phase 415 V) multi turn electrical actuator without starter. DN 80 mm (for Invididual pump delivery line)
MS dismantling joints with Rubber Compression Ring and adjustable follower flanged complete assembled unit with galvanized stud and nuts. PN 1.0 ratings. DN 125 mm (for Invididual pump suction line)
DN 100 mm (for Invididual pump suction line)
DN 80 mm (for Invididual pump delivery & common header line)
Supply, delivery at site and storage of MSERW Pipes as p er IS: 1239 (part I & II) for suction, delivery and common header lines ( PN 1.0 rating). DN 200 mm (for Suction line) 5.4 mm thickness.
DN 125 mm (for Suction line) 5.4 mm thickness.
DN 100 mm (for Suction line) 5.4 mm thickness.
DN 80 mm (for Delivery line) 4.85 mm thickness.
Supply, delivery at site and storage of bourdon type Gauges with 150 mm dia cast aluminium dial with SS internal Siphon Tubes, DN 15 mm GI Impulse line withThree Way Cock etc. Pressure Gauge ( 0 - 10 kg / sq.cm )
Compound Gauge ( + 1KSCG to -1 KSCG )
Supply, delivery at site and storage of 2mm thick CRCA sheet steel enclosed cubical type Indoor floor mounted 415V Power Distribution Board cum Motor Control Centre having required feeders, starters etc. as per Specification as follows : INCOMMER :- 200A/36KA TPN, 415V, Feeder with E/F relay MCCB adjustable OLR with thermo magnetic release for O/C, S/C, E/F & SPD protection. All accories with digital maultifunction meter with RS485 port. OUTGOING (with all protection): a) 11 kw star delta Feeder - 3nos (2+1 spares) with digital maultifunction meter with RS485 port., b) 7.5 kw star delta Feeder - 3nos (2+1 spares) with digital maultifunction meter with RS485 port. c) 1.5 kw DOL Feeder (Chlorination) :-1no. with digital maultifunction meter with RS485 port.,d) 1.5 kw DOL Feeder (D watering motor) :-2nos. e)16 AMP, TP, MCB actuator feeder-4 nos. f) 32AMP/25KA TPN MCCB Feeder with timer (outdoor lighting)- 1no, g) 63AMP/25KA 4P MCCB (Spare)- 1no. h) 16 AMP, DP,MCB Feeder-1no, i) 8 step APFC panel for improvement of power factor upto 98%, all protection & relay. Panel should be compatible for trasfering data of pumps & actuators through multifuction meter with RS485 port & necessary port should be provided. Each individual feeder should consist of indicator lamp (LED), proper rating voltmeter & ammeter. All the components (major) - Siemens /ABB/Approved make of PHED.
100 Amp. 415V, 50 Hz 3P Triple Pole with Neutral Link With Rewireable Porcelein Fuse Units Main Switches. Make- PHE Approved make.
100 Amp. 4 way 415V Copper busbar chamber box by 16 SWG sheet steel enclosure including porcelain chair etc. with painting complete as per direction of the EIC.
1.1KV grade 35 sq.mm 3.5 core XLPE insulated Aluminium armoured cable conforming to IS 7098 (Part 1) 2011 with Up To Date Amendments.
Supply and delivery of 1.1KV grade 6 sq.mm 3 core XLPE insulated Aluminium armoured cable conforming to IS‐7098 (Part 1) 2011 with Up To Date Amendments. (Make: Approved Vendor list of PHED.)
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 3½ core, upto 35 sqmm
3 core, upto 6 sqmm
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 3½ core 35 sqmm cable
4 core 6 sqmm cable
Supply and delivery of De-watering pump with all equipments with automatic operation level controller float switch, cable, motor, pipe lines and accessories as per requirement. Power rating 0.70KW -1.1KW, outlet size 50mm, discharge capacity 250 LPM, Head-10m, supplying voltage 230V, single phase, 50Hz. (Make: Approved Vendor list of PHED.)
Supply and delivery MS slipon flange ASA 150 of 2.5 " diameter.
Supply and delivery MS slipon flange ASA 150 of 3 " diameter.
Supply and delivery MS slipon flange ASA 150 of 4 " diameter.
Supply and delivery MS slipon flange ASA 150 of 5 " diameter.
Supply and delivery MSERW Eccentric Reducer (5'' x 4'')
Supply and delivery MSERW Eccentric Reducer (4'' x 3'')
Supply and delivery MSERW Concentric Enlarger (2 1/2 '' x 3'')
Installation of above supplied materials sl. no. 1 to 18 with Fixing all necessary Enlarger/Reducer and specials, gauges, including supply of all erection items, Proper allingment of high lift pumping machinery, pipe support, valve support, fabrication of suction line , delivery line and common delivery header, laying/drawing of power cables through cable tray (with necessary jointing materials, brass compensation glands) as required for completion of work as per relevant IE Rules and Hydraulic Standards with the entire satisfaction of EIC in compliance with approved departmental drawing and specification including labour charges and hire charges of Generator, welding set, fuel, lubricants etc. required for completion of work testing commissioning complete.
Excavation of soil for installation of Earth Electrode and filling & ramming. For Morrum Soil.
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required for double earthing arrangement of whole installation.
Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.
Supply and delivery at site of 9 mtr swagged type steel tubular poles(410SP-27) with arm bracket made of 40 mm dia. 1 mtr long (Make: Approve make of PHED) Test certificate of pole should be submitted at the time of delivery. Single arm bracket
Double arm bracket
Supply and fitting fixing of LED street light luminaries, IP66 protection with all complete set. Model: Phillips BRP409 74 watt LED/Similar(Make: Havells/Approved make of PHED)
Supply and delivery at site of 1.1 KV grade 2 core 4 sq.mm XLPE insulated Al. Ar. Cable Conforming to IS:7098(Part-I) 1988 for outdoor lighting, Manufactures test certificate should be submitted. [Make:Gloster/Havells/Polycab/PHED Approved]Supply of cable as per actual requirement at site.
Erection of Single Steel tubular pole of length as 9 mtr with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly. a. Upto 9.0 mtr. Size 0.6x0.6x1.70 mts
Extra on items 1& 2 above, for providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) suitable for alkathene/ polythene pipe entry as directed for street light wiring, incl. S & F 25cmx25cmx10cm GI Loop box, 16SWG & incl. drilled hole in pole.
Earthing with 1no. Of G.I. earth spike (20 mm dia. X 1.5 mtr. Long) driven into the ground upto 2 mtr.. drawing earth line with separate 6 SWG G.I. Wires providing 15 mm dia. G.I. pipe protection from earth spike feeder box/junction box/poles and fixing to the same by suitable nuts & bolts all complete as per direction of EIC.
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :For 2 core upto 4 sqmm
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 2 core 4 sqmm cable.
Laying of one No. cable 4 sq.mm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.
Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. 3 x 36/0.3 (2.5 sqmm)
Painting of the installation (viz. pumps, valves, pipe lines etc. by two coats of epoxy paint (colour to be decided by EIC) over a coat of primer as per direction of EIC.
Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint Upto 9.0 mtr. long pole One coat of red lead/Zinc chromate priming
1st coat of synthetic enamel paint over the primer
2nd coat of synthetic enamel paint over the 1st coat
Add GST @ 18%
Add CESS @ 1%
RABINDRA NATH KHAN
TAPAN KUMAR DEY
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .