Beautification of Town Khansahib (Phase-1st)

PART A-CIVIL & SANITARY WORKS

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil :

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

P/L of stone soling incl. ramming,hand packing and all carriages, complete job in geocell,trenches,foundation etc.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Mud mat

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at plinth beam level and DPC level Thermo-Mechanically Treated bars of grade Fe-500D or more. Reinforcement @ for all rcc work

FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for:Lintel, beams, plinth beams, girders, bressumers and cantilevers.

FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

CERAMIC GLAZED TILES Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

MARBLE Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Raj Nagar plain white marble/Udaipur green marble/zebra black marble (Area of slab over 0.5 sqm)

Providing and fixing cupboard shutters 25mm thick, with pre laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked exterior grade (Grade I Type II) having one side decorative lamination and other side a balancing lamination including second class teak wood lipping of 25mm widex12mm thick with necessary screws and bright finished stainless steel piano hinges complete as per directions of Engineer-in-charge

Providing and fixing first-class marine grade plywood with a thickness of 19 mm for internal and external wall lining work. The plywood shall have a density of 811 kg/m³ (observed value) and shall be ISI marked to ensure quality. It shall include a 20-year replacement warranty and shall have a moisture content ranging from 5-15% (criteria) with an observed value of 9.2%. The plywood shall be water-resistant, with a perpendicular to grain strength of 34.5 N/mm² (observed value), exceeding the minimum criteria of 25 N/mm². It shall also have a glue adhesion in the dry state of at least 1350 and resistance to water with an observed value of 1233, surpassing the minimum required 1000. The parallel to grain strength shall be a minimum of 40, and the plywood type shall meet the criteria with observed values for various properties, ensuring durability and performance. The rate shall include nails or required gluing work and carriage up to the site of work

Providing and fixing bright finished brass handles with screws etc. complete : 100 mm

Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters including fixing with necessary screws etc. complete. Double strip (Horizontal type)

Providing and fixing pvc edge beading for side edges of cubboard shutter for finish surface with a width of 20 to 40mm of roll having a length of 80m with having a single sided finish including glue for fixing as per engineer in charge. Complete

Providing and fixing stainless steel (Grade 304) Structure made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

DEVRI STONE WORK Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed Fine chisel dressed

Extra for fine chisel dressed Devri Stone in square or rectangular Pillars

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge.Made of G.I. wire of dia 4 mm

Providing and fixing wooden panelling 15mm thick over framming work of required pattern and design water proof strips of ply board imported wood panelling for ceiling/walling(imported wood/RAIT wood) including cornice and required beadings complete job as per direction of Engineer in charge

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. Complete 50 mm thick with 20mm nominal size stone aggregate.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately Changez Khani including cornice and required beadings complete job as per direction of Engineer in charge

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1+B52Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) Qaurry

MARBLE STONE FLOORING Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with: Black zebra 18mm complete job as per direction of Engineer in charge

Extra for pre finished nosing to treads of steps of marble stone

Providing and fixing first-class marine grade plywood with a thickness of 12 mm for internal wall lining work. The plywood shall have a density of 811 kg/m3 (observed value) and shall be ISI marked to ensure quality. It shall include a 20-year replacement warranty and shall have a moisture content ranging from 5-15% (criteria) with an observed value of 9.2%. The plywood shall be water-resistant, with a perpendicular to grain strength of 34.5 N/mm2 (observed value), exceeding the minimum criteria of 25 N/mm2. It shall also have a glue adhesion in the dry state of at least 1350 and resistance to water with an observed value of 1233, surpassing the minimum required 1000. The parallel to grain strength shall be a minimum of 40, and the plywood type shall meet the criteria with observed values for various properties, ensuring durability and performance. The rate shall include nails or required gluing work and carriage up to the site of work as per direction of Engineer in charge

Providing and fixing wooden framing battens for khatambandi ceiling work using imported or kiln-dried (KD) wood of approved quality . The battens shall be properly seasoned, straight, and free from defects or warping. They will be securely fixed to the ceiling framework or joists at the required spacing using suitable galvanized nails or screws to ensure proper support for the khatambandi panels. The work includes all necessary cutting, fitting, alignment, and removal of any waste material. The wood shall be treated with preservative or termite protection before fixing. All labor, materials, tools, and equipment needed to complete the batten framework as per approved drawings and specifications shall be included. complete job as per direction of Engineer in charge

Providing, fabricating, and installing LED display board of size 6 ft x 4 ft, comprising: High-brightness outdoor-rated LED module (P6 or equivalent) with waterproof casing MS box framing (40x40x2 mm) with rust-proof paint MS pipe post (75 mm dia, 3 mm thick) with base plate and grouting Electrical wiring, control unit, and weatherproof junction box Complete in all respects including transportation, installation, testing, and commissioning as per engineer’s instructions

Providing and fixing decorative LED light strip (flexible type) in spirals over existing trees or electric poles, including supply and installation of weatherproof (minimum IP65 rated) LED strip of length up to 10 meters per location, suitable for outdoor use and continuous operation. The strip shall be fixed using appropriate clips, cable ties, adhesives, or other non-damaging methods to ensure firm and aesthetically pleasing placement in spiral form around the tree trunk or pole. The item includes all necessary accessories such as drivers, adapters, concealed wiring, and connection to the nearest power source with proper electrical protection. The work shall be completed in all respects as per the directions of the site in-charge. make phillips, wipro or equivalent

PART B-SANITARY WORKS

PP-R PIPES AND FITTINGS Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe, 16mm OD(SDR-7.4)

P/F of Geysers 50-Litre 2000-Watt Storage Water Heater (White) incl. all fittings and fixtures make: venus, jacquar , racold or equivalent.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge.

Providing and fixing jali for water closet or wash basin including P.V.C waste fittings complete:

Providing and fixing pvc pipes class c pipe incl soil waste and vent pipes

Carriages for Different Materials

Crushed Aggregate Avg Lead of 15kms

Sand Avg Lead of 15kms

Bricks Avg Lead of 30kms