SR to Prant Kachery at Rajpipla Ta.Nandod Dist. Narmada (Repairing of Roofing, Grill Color, Door Window Repairing Work)

Name of Work : SR to Prant Kachery at Rajpipla Ta.Nandod Dist. Narmada (Repairing of Roofing, Grill

Color, Door Window Repairing Work)

BILL OF QUANTITIES

Item Description of Item (with brief specification and reference to book of

No. specifications) Quantity Unit Rate Amount

1 Dismentling doors, windows, ventilators etc. (wood or steel) shutters including

chowkhats architraves, holdfasts and other attachment etc. complete and stacking

them within all lead and lift.(i) Not exceeding 3 Sq.M. in area. 21.00 No. 196.66

2 Dismentaling tiled of stone floors laid in mortar including stacking of serviceable

materilas and disposal of unserviceable materials with all lead and lift. 32.70 Smt 50.28

3 Dismentalings manglore of country tile roofing with battens boarding etc.

including stacking of serviceable materilas and disposal of unserviceable materials

with all lead and lift.(ii) A.C. sheet roofing.

4 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of

single or half brick walls for interior plastering upto floor two level and finished

even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

5 Providing and fixing M.S. grills of required pattern to wooden frames of windows

etc. with M.S. flats at required spacings and frame alround, square or round bars

with round headed bolts and nuts or by screws (A) Plain Grill.

6 Providing and fixing 35 mm thick shutters for Doors, windows and clerestory

windows including Indian teak wood frames 10 cm x 7 cm. size including anodized

alluminium fixtures and fastenings including primer coat of approved quality and 37.60 Smt 5338.30

two coats of oil painting etc, complete. (i) Fully Glazed.

7 Carrying out wall treatment for termite control including spraying with chemical

solution in oil base including labour and material Using Chlorpyriphos 20 ECAs per

IS 6313 part - II (1% concentration by mass) is recommended i.e one litre chemical

emulsion diluted with 19 liter oil base. Total solution will be 20 liters inclusive of 53.30 Smt 29.94

one liter chemical emulsion application at the rate of 7.5 litre chemical / Sqm of

surface is recommended as per I.S.

8 Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign 101.00 Smt 137.23

matter and sand papered smooth/ Removing Old Colour/Apply Putty

9 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of

cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing

flooring by adhesive material including dismentaling of existing flooring and

jointed with color cement slurry including finised with flush pointing & cleaning

the surface etc. complete for light shade (upto 10 ton)

10 Applying priming coat over new steel and other metel surface after and including

preparing the surface by throughly cleaning, oil,grease, dirt and other foreign

matter and scoured with brushes fine steel wood, scrapers and sand paper with 167.70 Smt 131.86

ready mixed priming paint brushing red lead.

11 Providing and fixing G.I. corrugated steel sheet roofing of approved make,

conforming to relevant IS specifications, including supplying, laying and fixing in

position with necessary galvanized iron J or L hooks, bolts, nuts, washers,

bitumen/EPDM washers, and including drilling holes, cutting to required size, 518.40 Smt 1605.90

providing overlaps (end and side laps), and fixing with proper slope, including all

accessories such as ridges, hips, valleys, gutters, flashing pieces etc., complete in

12 Providing and fixing standared extruded of alluminium section of size 63mm x

38.10mm x 1.2mm , @ Wt. 0.643Kg/mt with colour Powder Coated alluminium

frame for ventilation with 5 mm thick frosted glass as details etc complete for 1.60 Smt 1175.56

In Word : Twelve Lakh Thirty Thousand Three Hundred Thirty-Three Rupees and Seven Paise Only.

I/We am/are willing to carry out the work at… % above/below percent(Should be written in figures and words) of the estimated rate

mentioned above. Amount of my /our tender works out as under.

* Estimated Amount * Estimated Amount

put to tender put to tender

Deduct :…………% Below Add :………%Above

In Words …………………………………… In Words………………………………

* (Please strike out whichever is not applicable).

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no

extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the

cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all

5 The amount of dismentalled credit materials at Rs. 18868 shall be deducted from first R.A. Bill.

6 The Contractor will have to submit the mix design for different grades his own cost befor execution as directed and to be approved

From the Engineer In Charge.

Deputy Executive Engineer Executive Engineer

Rajpipla (R&B) Sub Division Rajpipla (R&B) Division

Rajpipla Rajpipla