Repair, Renovation, Restoration work and other miscellaneous work at different pumping stations of the university campus.

DESCRIPTION UNIT QTY RATE AMOUNT

Removing of existing pipeline incl. removal of

specials, valves jointing material including

carting and stacking of removed material from

site of work to the department store as directed

excl. excavation and refilling. 100mm Dia DI

Pipe. Rmt. 955.00 23.00

1.1 150mm Dia DI Pipe Rmt. 285.00 28.75

1.2 250mm Dia DI Pipe Rmt. 100.00 64.40

Providing and fixing flanged D.I.D.F. / Class K-9

pipes vertically for RCC Reservoir incl. providing

clamps at every 3 mt incl. jointing materials such

as nuts, bolts, rubber packing, hydraulic testing

and necessary scaffolding etc. complete.

100mm Dia. DIDF Rmt. 540.00 2684.10

2.1 150mm Dia DIDF Rmt. 150.00 3934.15

2.2 250mm Dia DIDF Rmt. 50.00 6694.15

Providing and supplying D. I. K-9 grade pipes for

following nominal bore diameter with internal

cement mortar lining including all taxes,

insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading,

conveyance to departmental stores, stacking

etc. complete. (IS 8329-2000). 100mm Dia.

Providing and supplying ISI mark G. I. pipes with

Couplings of following class and diameter

including all taxes, insurance, transportation,

freight charges, octroi, inspection charges,

loading, unloading, conveyance to departmental

stores, stacking etc. complete. (IS -1239) (Not

for well/tube well column pipe). Heavy Duty

Supplying of following size of HEAVY UPVC

5.0 column pipe with coupler and wire lock. 100 mm

DESCRIPTION UNIT QTY RATE AMOUNT

Providing and supplying in standard length ISI

mark rigid unplasticised PVC pipes suitable for

potable water with ring fit joint including cost of

rings, as per IS specification no. 4985/1988

including all local and central taxes,

transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to the

departmental stores and including cost of

jointing meterial etc. complete. Note : 1.One

coupler / ring shall be provided with each full

length pipe cost of which is included in rates

below. 2. 3% (Three) Discounted rate to be

consider for Coupler jointed pipe. 110mm Dia

Providing, laying and jointing in true line and

level 160 diametre U.P.V.C (Type B) conforming

to IS 13592-1992 with one end plain and other

end socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant,

pipe shall be fixed on wall using of PVC clamp

of the size 160 mm diametre x 210 mm length x

196 mm heigh at every 2000 mm center to

center or shall be concealed in walls as directed

including necessary fittings such as bends,

shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement

including cost of all materials.

Providing, laying and jointing in true line and

level 110 diametre U.P.V.C (Type B) conforming

to IS 13592-1992 with one end plain and other

end socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant,

pipe shall be fixed on wall using of PVC clamp

of the size 110 mm diametre x 149 mm length x

145 mm heigh at every 2000 mm center to

center or shall be concealed in walls as directed

including necessary fittings such as bends,

shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement

including cost of all materials.

DESCRIPTION UNIT QTY RATE AMOUNT

Manufacture, Supply & Delivery of Ductile Iron

Flange socket spigot bends, tees, reducers or

any other specials as per BS-EN-545/1995

Class-A series K12 suitable for use with D.I.

Pipes manufactured as per IS:8329/1994

delivery of specials is to be made to GWSSB

9.0 store or site of works any where in Gujarat

including all taxes, loading, unloading, carting,

stacking, insurance, inspection charges, octroi

etc. complete. With external bitumen & zinc

coating & internal cement mortar lining. Socket

& Spigot Type. 80 to 300mm dia.

9.1 Flanged ended - 80 to 300mm dia. Kgs. 965.00 155.00

Providing & Supplying ISI Marked PVC

Specials. Tee, Bend, Reducer etc. Job 1.00 19350.00

Providing and supplying ISI mark CI D/F Sluice

valves, butterfly valves & Reflux valves of

following class and diameter including all taxes,

insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading,

11.0 conveyance to departmental stores, stacking

etc. complete. Sluice valves as per IS - 780 &

2906 / 1984. Sluice Valve ISI Mark only. PN-1.6

With hand/wheel cap operated. (Alt-1 type long

body). 100mm Dia Sluice Valve

11.1 150mm Dia Sluice Valve No 15.00 6545.00

11.2 250mm Dia Sluice Valve No 4.00 18009.00

Providing and supplying ISI mark CI D/F Reflux

Valves as per IS:5312 (Latest Edition) of

following class and diameter including all taxes,

insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading,

conveyance to departmental stores, stacking

etc. complete. Reflux valves PN 1.6 IS

with ISI mark. 100mm Dia. No 5.00 5563.00

Excavation for pipe line trenches for water

supply, sewerage line, manhole etc. all with

shoring and struting if required as per required

gradient and line including safety provisions

13.0 using site rails and stacking excavated stuff

including up to all required lead cleaning the site

etc. complete for all lifts and strata as specified.

In all sort of soil and soft murrum. Upto 1.50 Mt.

Depth. Cmt. 917.00 102.35

13.1 For CC 1:2:4 or Asphalt Road Cmt. 30.00 427.80

Lowering, laying and jointing C. I. S & S Spun

pipes suitable for Tyton joints / Mortar lined D.I.

Pipes of various classes with CI / MS specials of

14.0 following diameters in proper position, grade

and alignment as directed by Engineer-in-charge

including hydraulic testing etc. comp. For

14.1 For 150mm Dia Pipe Rmt. 320.00 87.40

DESCRIPTION UNIT QTY RATE AMOUNT

14.2 For 250mm Dia Pipe Rmt. 100.00 146.05

Lowering, laying and jointing G. I. pipes with G.I.

specials of following diameters in proper

position, grade and alignment as directed by

Engineer-in-charge including conveyance from

stores to site of work, labour, giving hydraulic

testing, etc. comple. 50mm Dia Rmt. 25.00 20.70

Lowering, laying, fixing and jointing

PVC/uPVC/cPVC pipes and specials of

following class and diameter including cost of

16.0 conveyance from stores to site of works

including cost of labour, material, cement

solvent, giving satisfactory hydraulic testing as

per ISI code. For 110mm Dia PVC Pipes. Rmt. 100.00 21.85

16.1 For 160mm Dia PVC Pipes Rmt. 50.00 32.20

Lowering, laying and jointing in position

following C. I. / D/F Reflux valves, Butterfly

valves, Sluice valves and Air valves including

17.0 cost of all labour, jointing material, including nut

bolts and giving satisfactory hydraulic testing,

etc. complete. 100mm Dia. No 32.00 504.85

Providing and casting in situ C.C. in grade M-20

(proportions as per mix design or as per table

of IS456 2000 in masses by weigh batching )

using granite, quartzite trap metal of size 6 mm

to 20 mm for RCC work, including scaffolding

centering, formwork, needle vibrated

18.0 consolidation, curing complete up to 6 meter

depth or height (excluding cost of reinforcement

and neat finishing) with centering and

shuttering/deshuttering etc. complete for

structure other than water retaining (Below G.L)

For Thrust Block.

Providing and cast in situ C.C. in grade M-25

proportions of ingredients as per mix design by

weigh batching using granite, quartzite trap

metal of size 12 mm to 20 mm and or 6 mm to

12 mm including scaffolding centering formwork,

19.0 needle vibrated consolidation, curing and

hydraulic testing etc. complete (excluding cost of

reinforcement) with centering and

shuttering/deshuttering etc. comp. up to 6 meter

height /depth Av. G.L.for all water retaining

structures. Cmt. 20.00 7710.75

Refilling the pipeline trenches incl. ramming,

20.0 watering, consolidating desposal of surplus stuff

as directed within a radius of 3 km. Cmt. 779.00 25.30

DESCRIPTION UNIT QTY RATE AMOUNT

Supplying cutting, bending, binding and placing

in position steel as per plan and design and as

per ISS 2502 including cost of steel and binding

wire for reserviors/structures only including lift

up to 6 meter height or depth below G.L. for all

diameters. Do-Thermo mechanically Treated

(TMT) bars Fe-500 grade for all diameters.

Labour charges for Jointing on CI/DI pipeline/

Valves of following diameter at different places

including necessary excavation manually or by

machinery, removing of mud, dewatering,

cleaning of pipe, cutting of pipe, Jointing &

repairing using CID joints including CID joints,

rubber rings, nut bolts, hiring excavator, Hydra/

Crane, dewatering machine, fuel, operator etc

complete (including cost of jointing material but

excluding cost of pipe). For 100mm Dia Pipe or

22.1 For 150mm Dia Pipe or Valve No 27.00 2870.40

22.2 For 250mm Dia Pipe or Valve No 8.00 5315.30

Labour charges for Jointing in PVC pipeline of

folling dia meter at different places including

necessary excavation manually or by mechanise

excavation, dewatering removing of mud,

cleaning of pipe and leakage portion, cutting the

pipeline & removing piece of pipe from trench

with inclussive of mechanical devices JCB,

Hydra/Crain if necessary & labours required with

providing material such couplers, solution etc.

comp. (incl. all material but Exclu. cost of pipe)

For 110mm Dia Pipe.

23.1 For 150mm Dia Pipe No 12.00 1873.35

Supply and installation of MS fabricated

structure cabin @ site of work using 65 mm,

mm & 25 mm square pipes with cabin size

mtr x 1.5 mtr X 2.13 mtr including providing &

fitting of (1) backalite sheet 3.5 mm thick in

sides, (2) 20 guage MS sheet outer side for side

walls, (3) backalite sheet 3.5 mm thick sheet for

roof side, (4) 24 guage GI sheet out side with

mm plywood sandwitch fitting & flooring with

24.0 mm water proof plywood sheet and (5) shock

proof rubber mating. Job includes oil painting

two coats, door locking handle arrangement,

providing proper air ventilation and fuse box.

The meter & fuse box should be fitted on timber

hold fast for holding screw or nut bolts by semi

skilled labour as per detailed technical

specifications, drawings and instructions of the

Engineer-in-charge.

DESCRIPTION UNIT QTY RATE AMOUNT

Preparing structural design of RCC Under

Ground / Partially under ground / above high

ground level Reservoir of required capacity as

per relevant I.S. standards and constructing the

same, including excavation in all types of soil

strata (including rock) including shoring strutting

if required, for loose soil / to protect from

collapse, casting 100 mm thick P.C.C. levelling

course in M-15, Refilling the pit with proper soil

and disposing of the surplus stuff at all lead.

Including cement plaster in CM 1:2 with

approved water proofing compound to all over

inside container (i.e. walls, base, top slab/dome

bottom etc. all). Including all types of labour and

material charges of lowering, laying, erecting /

hosting and jointing of pipe assembly to inlet,

outlet overflow, washout and bye pass

arrangement as per hydraulic design.

Providing and fixing accessories, CI Manhole

frame and cover, water level indicator, adequate

cowl type ventilators or lantern type ventilator

with stainless steel jail. RCC chambers for

valves. Providing and applying three coats of

cement paint / snowcem to the out side face of

structure. It also includes satisfactory water

tightness test as per relevant I.S. code and

painting name of scheme and capacity on the

tank as per direction of engineer in charge.

B.B. Masonry Chambers for Valves. Providing

and applying three coats of cement paint /

snowcem to the out side face of structure. It also

includes satisfactory water tightness test as per

relevant I.S. code and painting name of scheme

and capacity on the tank as per direction of

engineer in charge.

List of Indian Standards for Design of GSR /

The structural design of GSR shall be in

accordance with provisions relevant I.S

(1) I.S. 3370 part I & II 2009 or Its latest revision

(1.1) I.S. 3370 part III & IV 1965 or Its latest

(2) I.S. 456 – 2000 or Its latest revision.

(3) I.S. 1893 – 2000 – 1984 or Its latest revision.

(4) I.S. 875, Part – 1 to 3, 1987 or Its latest

General Specifications:-

DESCRIPTION UNIT QTY RATE AMOUNT

(1) Water depth in container shall be adopted as

per data of tender. Capacity shall be calculated

excluding free board of the reservoir. If water

depth is not specified, the suitable water depth /

acceptable to field engineer in accordance with

hydraulic requirement (2) Shape of schoanltl

abine eard (oinp tpeladn f)o rs pceacpiaficeidty

.by in data shall be adopted in absence circular

shape shall be adopted.

(3) Size shall be fixed as per availability of

space (land area) at site / acceptable engineer

(4) Effect of overlapping of pressure bulbs on

soil due near by structure and proposed sump

should be considered.

(5) Care shall be taken that no damage should

occur to nearby existing structure.

Compensation shall be paid for the same by

(6) The minimum concrete grade for RCC shall

(7) HYSD Fe 415 / 500 grade reinforcing bars

confirming to I.S. 1786 / 1139 shall be

25.0 considered in design. CRS / TMT bars shall be

provided. In saline atmosphere corrosion

resistance stainless steel / HCR rebar shall be

provided. Any other steel can be used with

approval of C.E./ in situation of non availability in

market without extra cost.

(8) Minimum size (or thickness) of various

components shall be provided as per tender

criteria / specifications in absence as per I.S./

Std. practice of G.W.S.S.B. Minimum

dimensions specified for various components in

tender data / specifications shall be provided

(9) The safe bearing capacity (SBC) shall be

referred from SBC test report. In absence of

report it shall be referred from data sheet. If poor

soil is found / water table is met with during

excavation SBC shall be scientifically

ascertained and design shall be revise. No extra

shall be paid for increase in quantity.

(10) DI pipes and special shall only be used if

type is not specified in tender.

(11) The rate shall include cost of dewatering

during excavation making all arrangement when

water table meets within depth.

(12) The structure shall be designed properly to

resist uplift due to ground water table specified

in data or actual ground water table meets with

during excavation. If GWT / Uplift is mentioned

in tender and during excavation it dose not meet

7.5% rate shall be reduced.

DESCRIPTION UNIT QTY RATE AMOUNT

(13) SS pipes railing shall be provided over

sump perifery when sump height is ≥ 1.5 meter

above ground level.

(14.a) RCC staircase/RCC Steps should be

provided from GL to sump top slab based on the

height of the GSR above/below the ground.

(14.b) RCC Staircase with SS railing to be

provided inside reservoir container. BB Masonry

staircabin to be provided to cover the same with

MS safety door having locking arrangement.

(15) Appearance of structure should be

aesthetically good looking acceptable to

(16) Any change in size, shape, depth below GL,

height above GL, water depth, F.B., size of

member etc can be permitted in exceptional

case due to site condition or hydraulic design

requirement by C.E. No extra shall be paid for

(17) Any change in data, dimensions, shape,

water depth, reduction in size if permitted by

competent authority and if it reduces quantity

then payment shall be reduced prorate.

(18) When capacity of GSR / Sump is > 20 lakh

litres two or suitable compartments acceptable

to executive engineer shall be designed and

(19) Agency shall engage qualified (at least

graduate) consulting engineer for designing the

structure and he / she shall visit the site for

guidance of work.

(20) 75% part rate shall be payable for concrete,

reinforcement and plastering items of container

until satisfactory hydraulic testing for water

tightness is performed as per tender condition.

Till the work shall be treated as incomplete.

Above conditions / general specifications Sr. No.

1 to 20 are part and parcel of tender (contact)

and prevail over other provisions in tender.

As above with water table (Sub soil water

level below foundation).

Cost of 6.0 Lac.Liter Capaity. No 1.00 2257589.00

DESCRIPTION UNIT QTY RATE AMOUNT

Supply & Installation of Sintex SMC (GRP)

Panel Tank. Capacity 0.48 LL, Size 4.0 x 4.0 x

3.0 Mtr. Having Manhole Panel Assembly with

lockable Lid dia. 600mm, 50mm Dia PVC Air

Vent (1 No), FRP internal & External Ladder,

Inlet 50mm (2 No), Outlet 100mm Dia (2 No) etc.

26.0 Including Accessories like PVC Gasket/ Air vent,

Hot dip Galvanized Nuts & Bolts, PVC Roof

Support Pipe, External Support / External Top

Tie Rod required if height more than 1.0 mtr.,

FRP Pultrured / PVC pipes Internal Support.

etc. Complete. As Directed By Engineer In

Charge. KL 48.00 21000.00

Providing and supplying D. I. K-7 grade pipes for

following nominal bore diameter with internal

cement mortar lining including all taxes,

insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading,

conveyance to departmental stores, stacking

etc. complete. (IS 8329-2000). 150mm Dia

Pipes. Rmt. 40.00 1477.00

Providing and fixing M.S. grills of required

pattern to wooden frames of windows etc. with

M.S. flats at required spacings and frame

alround, square or round bars with round

headed bolts and nuts or by screws (A) Plain

Providing and fixing 50 cm wide M.S. Ladder

fabricated from M.S. Flats 10 mm x 75 mm with

20 mm dia steel bar steps in double rows, @

29.0 cm C/C. The include stays of 10 mm x 50 mm

flats fixed at 3 meter C/C with welding anchoring

and 3 coats anticorrosive paint.

29.1 Safety Cage for MS Ladder Kg. 575.00 77.05

Gunniting the exterior surface in CM 1:2 having

thickness of 40 mm to 50 mm (Ave.) for beam,

braces, column and container slab incl.

chiselling and scraping loose concrete cleaning

the surface with water and air under pressure

and including providing and fixing in position

steel wires square mesh 75 mm x 75 mm as per

IS: 1966-1982 3.15 mm Wt/Sq. Mt. 1.64 Kg. with

spot welding wherever necessary with main

reinforcement incl. tying binding with wire incl.

scaffolding centering staging all equipment and

materials etc. complete incl. labour and testing

of the container.

DESCRIPTION UNIT QTY RATE AMOUNT

Providing the gunniting to interior surface of

cement / masonry / Water Tank of various

capacities as specified at various places with

cement mortar (1:2) in thickness of 40 mm

including chiselling and scraping loose concrete

and plaster incl. providing and fixing in position

mm dia. mild steel bars reinforcement at 15 cm

c/c both ways including fabricating and cost of

binding wires including centering, staging all

equipments etc. complete including scaffolding,

carting of all type of material and equipments to

site of work and giving hydraulic testing up to

satisfaction of engineer in – charge. --do-- for

Columns, braces and Shaft staging above 6m

Providing pressure grouting at 5.6 Kg/Sq.cm in

required row/zigzag fashion as specified at

m interval as per site conditions to stop

leakages from water retaining structures

32.0 including supply of cement and hardening

chemical, bringing equipments like compressor

and all scaffolding works to get smooth finishing

as directed by engineer in charge. To

Concrete/R.C.C Structure. Bag. 91.00 612.99

Drilling 40 mm Dia. Holes in masonry/concrete

structures with providing and fixing 500 mm long

GI Pipeline for pressure grouting including

supply of material, machineries and labour cost

Labour charges for cleaning of sump / GL

cistern including cleaning and removing algae,

calcinations, sludge, dirt deposition from bottom

and as well as from wall of container,

disinfection by bleaching powder with all

necessary tools and plants, labours and cost of

disinfectant etc complete. --do-- for 9.0 Lakhs

Liter Capacity. No 1.00 9684.15

34.1 --do-- for 1.25 Lakhs Liter Capacity. No 1.00 2617.40

Labour charges for cleaning of RCC ESR

including cleaning and removing algae,

calcinations, sludge, dirt deposition from bottom

and as well as from wall of container,

disinfection by bleaching powder with all

necessary scafolding, tools and plants, labours

and cost of disinfectant etc complete --do-- for

2.0 Lakhs Liter Capacity. No 1.00 3140.65

Cement plaster 20 mm thick in C.M. 1:2 using

36.0 water proofing compound of approved quality

including finishing etc. complete. Smt. 411.00 222.20

Applying any approve quality of cement paint in

37.0 three coats including cleaning washing etc.

complete. Smt. 2055.00 90.85

DESCRIPTION UNIT QTY RATE AMOUNT

Applying Anti corrosive Chemical treatment

Food Grade for Exposed Surfaces of M.S.

Structures / Pipe Grade for Exposed Surfaces of

38.0 M.S. Structures / Pipe and smooth and applying

treatment in two coats and smooth and applying

treatment in two coats.

Providing and fixing water level indicator or

depth gauge painted on TW plank 25mm/ MS

plate 4mm thick float, level indicator sliding wire

on standard pullies incl. necessary arrangement

to prevent the swinging etc. complete with

calibration uo to 5 mt height. No 4.00 6348.00

Finishing wall with water proofing cement paint

of on wall surfaces (Two coats) to give an

approved brand and manufacture and of

required shape even shade after thoroughly

brushing the surface to remove all dirt and

remains of loose powered materials. Smt. 2684.00 100.00

Supply & fixing factory finished cold formed

Light guage steel frame sections confirming to

SP:6 (5) 1980 at site or work including riveted,

bolted or welded in builtup for all type of

41.0 sections, in framed work, cutting, hoisting, fixing

in position and applying primer coat of approved

steel primer etc. complete as per structural

designs & directions of Engineer-in-charge.

Providing an fixing 25 mm x 5.2 mm MS railing

with three horizontal rows and posts of angle

iron of size 65 mm x 65 mm x 8 mm RCC

mm and 1.15 meter height and placed at 1.85 mt

/ c/c including painting two coats and anchorage

in CC etc. complete. Kg. 2151.00 88.55

Providing fusion bonded Epoxy coating not less

than 175 micron thickness and up to 300 micron

to reinforcement bars as per IS-13620-1993/

ASTM-775 M including testing of coating at plant

and all taxes (A) 10mm to 16mm dia bar.

Providing fusion bonded Epoxy coating not less

than 175 micron thickness and up to 300 micron

to reinforcement bars as per IS-13620-1993/

ASTM-775 M including testing of coating at plant

and all taxes (B) 20mm to 32 mm dia bar.

DESCRIPTION UNIT QTY RATE AMOUNT

Application of polymer modified mortar to the

damaged structure: Chip off loose weak

unsound concrete from the damaged structural

member upto the depth of sound concrete,

removal of corrosion scales on corroded

reinforcement after removal of corrosion scales

all exposed cone. surface shall be cleared.

Apply alkaline based rust converter in two coats

with a time interval between two coats, then

apply two coats of IPN coating to the exposed

corroded bars, apply CI (corrosion inhabitor) by

brush/ spray over the concrete (avoid coating on

steel). After spraying of inhibitor, bond coat of

epoxy-latex based polymer shall be brush

applied to the concrete as well as steel surface,

the subsequent 15 to 40 mm thick application of

polymer modified mortar must be applied before

the bonding coat is hardset. (the detail /

instructions of the methodology of work).

Demolition including stacking of serviceable

46.0 materilas and disposal of unserviceable

materials with all lead and lift. (i) R.C.C. work Cmt. 5.00 1056.58

Demolition of Brick work and stone masonry

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead

and lift. (ii) In Cement Mortar. Cmt. 24.50 549.49

Dismentaling tiled of stone floors laid in mortar

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead

and lift. Smt. 221.50 47.94

Dismentling steel work including distempering

49.0 and stacking the materials with all lead and lift.

For Rolling Shutters. Kgs. 300.00 3.76

Dismentling doors, windows, ventilators etc.

(wood or steel) shutters including chowkhats

architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and

lift. (i) Not exceeding 3 Sq.M. in area.

Scraping oil paint from steel and other metal

51.0 surface and making the surface even (with Hand

Scraping.) Smt. 9.00 187.52

Removing dry or oil bound distemper by a

washing and scraping and sand papering the

wall surface smooth including necessary repairs

to scratches complete. Smt. 501.00 11.26

Excavation for Foundation upto 1.5 m. Depth

including sorting out and stacking of useful

materials and disposing of excavated stuff upto

50 Meter lead (A) (loose or soft soil) Cmt. 276.00 120.01

Excavation for Foundation from depth 1.5 m. to

3.0 m. including sorting out and stacking of

54.0 useful materials and disposing of excavated

stuff upto 50 Meter lead (A) (loose or soft soil).

For column. Cmt. 18.50 133.05

DESCRIPTION UNIT QTY RATE AMOUNT

Filling available excavated earth (excluding

Rock) in trenches. Plinth, sides of foundations

55.0 etc. in layers not exceeding 20cm. In depth

consolidating each disposited layer by ramming

and watering. Cmt. 258.00 133.65

Filling in foundation and plinth with murrum or

selected soil in layers of 20cm thickness

including watering, ramming and consolidating

etc. complete. Cmt. 119.50 296.29

Carring out plinth treatment to post construction

/ existing structure by spraying chemical solution

for termite control treatment including labour and

material consistment with I.S.I specification.

Using Chlordene and Chiorpurfiles 20 EC. As

Per 6131_paret-II Consentration Weight one

57.0 percent is recommended i.e one litre 20 EC

chemical emulsion with 19 liter give 1 %

concrentration inclusive of one litre chemical

emulsion appication at the rate of 5 Litre

chemical / Sqm of surface is recommended as

Providing and laying cement concrete 1:3:6 (1

Cement, 3 coarse sand, 6 crushed stone

58.0 aggregates 20mm nominal size) and curing

complete excluding cost of formwork in

Foundation and Plinth. Do For PCC. Cmt. 101.50 3080.90

Providing and laying controlled cement concrete

M-200 and curing complete including the cost of

59.0 formwork but Excluding the cost of

reinforcement for reinforced concrete work in

Mass Concrete/Flooring. Cmt. 7.00 4464.20

Providing and laying controlled cement concrete

M-250 and curing complete including the cost of

formwork and excluding the cost of

reinforcement of reinforced concrete work in --

do -- for R.C.C. Column Footing.

60.1 -- do -- for R.C.C. Column Up to G.L Cmt. 3.00 6338.76

60.2 -- do -- for Ground Beam Cmt. 9.50 5875.17

60.3 -- do -- for Grade Slab Cmt. 8.50 4525.81

60.4 -- do -- for R.C.C. Column Above G.L Cmt. 9.00 6497.33

60.5 -- do -- for Coping Cmt. 3.00 5148.98

60.6 -- do -- for R.C.C. Lintel Cmt. 3.75 7633.58

60.7 -- do -- for Chhajja Cmt. 1.50 7633.58

60.8 -- do -- for R.C.C. Beam Cmt. 14.50 5763.06

Providing ISI Mark TMT Bar Fe-500

Reinforcment for R.C.C work including bending,

binding and placing in position etc. complete for

all Floors. Kg. 12125.00 77.29

Providing and Laying brick work using common

burnt clay building bricks (Conventional) having

crushing strength not less than 35 Kg./Sq.Cm in

foundation and plinth in Cement Mortar. (1:6) (1

Cement : 6 fine sand) - (A) Conventional.

DESCRIPTION UNIT QTY RATE AMOUNT

Providing and Laying brick work using common

burnt clay building bricks (Conventional) having

crushing strength not less than 35 Kg./Sq.Cm in

foundation and plinth in Cement Mortar. (1:6) (1

Cement : 6 fine sand) - (A) Conventional.

Providing and fixing 35 mm thick shutters for

Doors, windows and clerestory windows

including Indian teak wood frames 10 cm x

64.0 cm. size including anodized alluminium fixtures

and fastenings including primer coat of

approved quality and two coats of oil painting

etc, complete. (ii) Fully Panelled. Smt. 14.50 5338.30

Provoding and fixing 35 mm thick flush door

shutters, solid core construction with frame of

first class hardwood with cross board and face

veneer or plywood face panels, including

65.0 anodised alluminium butt hinges with necessary

screws. (B) Non-decorative type and block

board using bright finished M.S. piano hinges of

(A) Nickel plated piano hinges.

Providing and fixing window having extruded

aluminum Colour Powder Coated section frame

main outer size 63.50 x 38.10 x 1.95 mm, @ Wt

1.094 Kg / Rmt, horizontal two track member

size 61.85 mm x 31.75 mm x 1.20mm @ wt.of

0.695 Kg/mt, vertical member of size 61.85 mm

with sliding shutters of horizontal member size

vertical member of size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt with 5 mm thick

transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures

and transparent silicon sealant glass fixing to

frame as per details etc complete. for window.

Providing and fixing glazed louvered glass

windows and ventilators with teak wood frame

10cm. x 7cm. Size including 3 coats of oil

painting to wood work etc. complete. Rmt. 2.00 4202.12

Providing and fixing rolling shutters of approved

make made of 80 mm wide M.S. laths inter-

locked together through their entire length and

jointed together at the ends by end locks

mounted on specially designed pipe shaft with

68.0 bracket plates, guide channels and arragements

for inside and outside locking with push-pull

operation including the cost of hood cover and

spring etc. complete. (A) Shutters having width

DESCRIPTION UNIT QTY RATE AMOUNT

Providing and fixing Fly proof galvanised M.S.

wire gauge of I.S.l gauge designation 85 G. with

69.0 wire of dia. 0.56 mm to windows and celevating

windows including 60 x 20mm beading of teak

wood. Smt. 36.00 685.91

Applying Priming Coat on new steel and other

metal surface by throughly cleaning, oil, grease

and scoured with brushes fine steel wood,

scrapers and sand paper with ready mixed

70.0 priming paint brushing red lead and Painting two

coats with synthetic enamel paint, brushing to

give an even shade including cleaning the

surface of all dirt, dust and other foreign matter.

Providing 15mm thick cement plaster in single

coat on brick/concrete wall for interior plastering

and finished even and smooth in cement mortar

1:4 (1 cement : 4 sand) and finishing with a

floating coat of neat cement slurry upto floor two

level. Smt. 282.00 220.61

Providing 10mm thick cement plaster in single

coat on ceilings and soffits of stairs for interior

plastering and finished even and smooth in.

Cement Mortar 1:4 ( 1 Cement : 4 Sand) and

finishing with a floating coat of neat cement

slurry for all floors. Smt. 202.50 203.97

20mm thick sand faced cement plaster on walls

upto height 10 metres above ground level

consisting of 12mm thick backing coat of C.M.

1:3 (1-cement : 3-sand) and 8mm thick finishing

coat of C.M. 1:1 (1-cement : 1-sand) etc.

complete. Smt. 655.50 337.52

Applying two coats of putty & two coats of

primer of approved brand and manufacture on

new wall surface to give an even shade

including thoroughly brushing the surface free

from mortar dropping and other foreign matter

and sand papered smooth. Smt. 832.00 40.59

Distempering (Three Coat) with oil bound

washable distemper of approved brand and

manufacture and of required shade on wall

surfaces to give and even shade over and

75.0 including a primer coat with alkali resistance

primer of approved brand after throughly

brushing the surface free from other foreign

matter and also including preparing the surface

even and sand papered smooth. Smt. 567.00 101.75

Distempering (Three Coat) with oil bound

washable distemper of approved brand and

manufacture and of required shade on Ceiling &

Sloping Roof surfaces to give and even shade

over and including a primer coat with alkali

resistance primer of approved brand after

throughly brushing the surface to give and free

from other foreign matter and also including

preparing the surface even and sand papered

smooth. Smt. 284.00 113.17

DESCRIPTION UNIT QTY RATE AMOUNT

Finishing wall with Weather Proof Acrylic

Exterior Emulsion Paint on wall surface (two

coats) to give and required shape even shade

77.0 and of approved brand and manufacturer after

throughly brushing the surface to remove all

dirts, and remians of loose powdered materials

etc. complete. Smt. 1323.50 117.40

Providing and laying polished Kota stone slab

flooring over 20mm (Average) thick base of

cement mortar 1:6 (1 - cement : 6 - coarse sand)

laid over and jointed with grey cement slurry

including rubbing and polishing etc. complete.

(B) 30 mm thick Smt 200.00 1069.62

Providing and laying polished Kota stone slab

flooring over 20mm (Average) thick base of

cement mortar 1:6 (1-cement : 6-coarse sand)

79.0 laid over and jointed with grey cement slurry

mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete.

(A) 25mm thick Smt 82.50 1001.14

Providing and laying polished kota stone slab

25mm thick in risers of steps, skirting Dedo and

pillars laid on 10mm thick cement mortar 1:3 (1-

80.0 Cement : 3 coarse sand) and jointed with gray

cement slury mixed with pigment to match the

shade of slab including rubbing and polishing

etc. complete. Smt 36.50 1149.52

P & L 24" x 24" vitrified 8 mm thick tile flooring

over 20 mm (average) base of cement mortar

1:6 ( 1 cement: 6 coarse sand) on new surface

or fixing on existing flooring by adhesive

81.0 material including dismentaling of existing

flooring and jointed with color cement slurry

including finised with flush pointing & cleaning

the surface etc. complete for antiskit.

Providing and laying white glazed tiles 6mm

thick in skrting risers of steps and dedo on

82.0 10mm thick cement plaster 1:3 (1-cement : 3-

coarse sand) and jointed with white cement

slurry. Smt 71.50 970.17

Providing and laying polished Granite tiles

mm thick in risers of steps, skirting Dedo and

pillars laid on 10 mm thick cement mortar 1 :

(1 cement : 3 course sand) and jointed with gray

cement slurry mixed with pigment to match the

shade of slab including rubbing, polishing,

Moulding etc. complete. For Flooring, Doors &

Windows Edges. Smt 32.50 1631.15

DESCRIPTION UNIT QTY RATE AMOUNT

Providing and laying broken chine mosaic

flooring for terrace using 12 mm to 20 mm

broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be

84.0 tempered to bring mortar creme out upto surface

using white cement including rounding off

junctions and extending them upto 15 cm along

the wall, clearing with water and oxalic acid etc.

as directed. Smt 198.50 765.97

Providing and laying cement concrete flooring

1:2:4 (1- cement : 2-coarse sand : 4-graded

85.0 stone aggregate 20mm nominal size) laid in one

layer and finished with a floating coat of neat

cement. (B) 50mm thick. Smt 50.00 339.14

Providing and supplying in standard length ISI

mark rigid unplasticised PVC pipes suitable for

potable water with ring fit joint including cost of

rings, as per IS Specification no. 4985/1988

including all local and central taxes,

transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to the

departmental stores and including cost of

jointing material etc. complete.

Point wiring for Light / Bell with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in

below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth

continuity of following type, erected on PVC /

Metallic/ Wooden box, single mounting base

frame covered with textured/ metallic/ white

front plate modules erected on / in wall / ceiling

as per pipe erected, with necessary Lamp

holder/ ceiling rose / H.D. Connector as

directed. (a) with medium class Rigid PVC pipe

and accessories erected flushed on wall/ceiling

Point wiring for Tissino / Modular secondary light

point with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper

wires, in below type of pipe to be erected

complete with earth continuity and necessary

connection with primary light with accessories

erected on Metal / PVC / wooden box covered

88.0 with 3 mm thick PC(Polycarbonate) / Acrylic

sheet for open / concealed wiring. with

necessary Lamp holder / ceiling rose /

H.D.Connector as directed. Note:- Maximum up

to 6 mtrs length, excess will be considered as

Mains for Secondary Point. (f) with medium

class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

DESCRIPTION UNIT QTY RATE AMOUNT

Point wiring for FAN with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (Green) both are of .ISI

marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in

below type of pipe erected with 6A Modular

type switch and hum free EME step type

electronic fan regulator mounted and

accessories with earth continuity of following

89.0 type erected on PVC / Metallic/Wooden box,

single mounting base frame covered with

textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as

directed. (f) with medium class Rigid PVC pipe

and accessories erected concealed in

wall/ceiling complete

Point wiring for Individual Plug with & earth wire

of 1.5 sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type

of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate

90.0 front plate modules erected on / in wall / ceiling

as per pipe erected with following type of

accessories. [I] For 6A Plug and 6 a switch with

2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board (f) with medium class

Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete.

[II] For 16A Plug and 16 amp switch with 2-2.5

sq.mm Cu. Wire from mcb db board. (f) with

91.0 medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat.

Point wiring for on board Looped Plug with 6A

Modular type switch & 5 pin socket erected on

PVC / Metallic/Wooden box, single mounting

92.0 base frame covered with textured / metallic/

white front plate modules erected on / in wall /

ceiling with following type accessories Cat. III

DESCRIPTION UNIT QTY RATE AMOUNT

Point wiring for Two Way Controlled Light Point

with 2-1.5 sq.mm & earth wire of 1.5 sq. mm

(green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires

erected in below type of pipe with 6A Modular

type switches and following type of accessories

erected on PVC / Metallic/ Wooden box, single

93.0 mounting base frame covered with textured /

metallic/ white front plate modules erected on /

in wall / ceiling as per pipe erected. with

necessary batten/ angle holder or ceiling rose or

H.D. Connector as directed. (f) with medium

class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete CAT. III

Providing following type of Modular Type

Accessories mounted with PVC / metallic

/Wooden box, single mounting base frame

covered with textured / metallic /white front

plate, modules erected with necessary

connections as per site situation directed by

Engineer In charge. (1) One No. SP 6 Amp.

Cat.III. Ea. 38.00 151.50

94.1 (2) One No 5 pin plug. Cat.III Ea. 23.00 151.50

94.2 (9) 16 Amp. SP one way switch. Cat.III Ea. 12.00 180.79

94.3 (10) 6/16Amp. Universal socket. Cat.III Ea. 12.00 199.98

Providing and erecting ISI mark Medium class

RIGID PVC PIPES of following size complete to

be erected on/in wall or ceiling erected with

95.0 necessary PVC fittings & Junction boxes fixed

with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed (b)

Providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe

to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor

FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (A)

With medium class Rigid PVC pipe and

accessories. (a) 2 wire 1.5 sq. mm.

Supplying & erecting M.S. Box having 16 Gauge

painted with red oxide or Heavy duty PVC box

erected flushed on wall or concealed in wall with

necessary plastering & finishing as directed of

following size. (b) 175 mm x 100 mm x 75 mm(d)

DESCRIPTION UNIT QTY RATE AMOUNT

Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as

per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner

pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by highly

conductive compound with high charge

dissipation suitable for following type of

applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test

certificate including value of earth resistance of

installation duly stamped and signed by agency

and officer Incharge has to ensure the value of

earthing resistane mentioned in test Certificate)

& having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:-

ohm / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form,

Sulphar content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to retain

moisture for long time Necessary test report

must be submitted by Agency. (a) For Electrical

Installation up to 440V in normal soil. Length of

pipe - 1 Mtr. Back filling compound - 1 No Bag of

(b)For Electrical installation up to 11 KV in

Length of Pipe : 2.00 mtrs

Back filling Compound :1 no. Bag of 25 Kg. Ea. 4.00 5760.03

Providing & erecting Approved make Power

Saving 50 Watt Ceiling Fan with double ball

bearing ISI mark with Condenser 230 volt A.C.

50 Hz 1200 mm sweep complete having

3blades with aluminium blades with, canopy &

30 cms. down rod erected with earthing. (Make

shall be approved by Engineer in charge)

Supplying and erecting 19 / 20 mm. nominal

bore Medium Class M.S. Pipe down rod erected

100.0 duly painted for fan complete with proper

insulation without leckage and earthing.

Supplying & erecting fan hook box of 10 mm

M.S. round bar bounded to the RCC bars up to

50mm length each side and pierced through a

16 Gauge M.S. box / Heavy Duty PVC box

complete erected concealed in Ceiling with

necessary finishing. Ea. 12.00 108.07

Providing 2.5mm. thick laminated acrylic sheet

to cover the fan hook or Fan box. Ea 12.00 18.18

DESCRIPTION UNIT QTY RATE AMOUNT

Supplying & erecting approved make low noise

decorative exhaust fan having square frame

ABS body with inbuilt lowers & square frame.

Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium

die cast powder coated and high U.V. &

corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more

than 0.95, THD < 15%, CCT 3000 K to 6500K,

104.0 Luminaire efficency> 85 lumens/ watt, LED LED

driver efficiency > 85 % (fitting required LM-79 &

LM-80 Certificates) (NOTE: Below description

have shown ranges of Wattage capacity of LED

fittings. The Engineer incharge may select any

wattage capacity between the ranges shown. (A)

Tube Light with integral driver. (v) 36-40 Watts,

Surge-2 KV, IP-20, conventional 4 feet.

Supplying and erecting led lamps with following

wattage capacity of 220 to 240 voltage,

minimum 15000 burning hours life, 500 V in built-

surge protection, Polycarbonate diffuser,

mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5. (A) LED Lamps integral type,

with PC diffuser suitable LAMP holder. (ii) 5 to

watts. Ea 14.00 112.11

Supplying and erecting LED street light / Flood

light fittings with High power White LEDs

wattage of 3 Watt and above assembled on

single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast

aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with

diffuser and Polycarbonate optics/ lenses, with

toughened glass with company mark/name

engraved or embossed 160 to 270 V, Power

Factor more than 0.95, THD < 10 %, CCT

106.0 K to 5700K, Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver

efficiency > 85 %. (fittings required LM-79 & LM-

80 certificates) (NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings. The Engineer incharge may select any

wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV

integral and, Light must have 440VAC line

supply with over -voltage protection. above 36 to

106.1 (v) above 120 to 160 watts Ea 9.00 7875.98

DESCRIPTION UNIT QTY RATE AMOUNT

Providing and fixing wash down water closet

European type W.C. Pan with integral "P" or "S"

trap and PVC flushing cistern with a pair of

C.L.I. or Mild Steel Brackets, complete with

fittings such as lead value siphon, 15mm

nominal size brass ball value with polythene

float, C.P. Brass handle unions and couplings

for connections with inlet, outlet and over flow

107.0 pipes, 40 mm dia flush bend including cutting

holes in walls and making good the same

connecting the flush bend with cistern and

closet, Jet spray heavy duty with S.S. Braided

hose 60 cm long etc. comp. incl plastic sheet

cover including jointing trap with pipe in C.M. 1:1

( Cement : 1 fine sand) (a) Viterous China - (i) In

Providing and fixing gun metal chek or non

return fullway wheel valve. (A) 15 mm Dia. No 5.00 186.83

Providing and fixing Cast Iron (Spun nahni trap

of the 100mm. Inlet and 50mm. Dia outlet having

self cleaning design with C. I. Screwed down or

hinged grating and stainless steel jali at F.F.I.

Including cost of making cuts in walls slab floor

etc. and making them as per original testing etc.

complete as directed by Engineer-in-charge.

Providing and fixing S.W. gully trap with C.I.

grating brick masonry chamber and water tight

C.I. cover with frame of 300mm x300mm size

(inside) with standard weight. (i) Square

mouthtraps. (B) 150mm x 100mm size P or R

type No 5.00 1246.92

Providing and fixing Flat back washbasin

mm x 400 mm size in White Color with single

hole for pillar tape with C.I. or M.S. brackets

painted white including cutting holes and making

good the same but Including 15mm dia. pillar

tap, capstan head, screw down high pressure

with screws, shanks and back nuts, 15mm dia

brass screw down stop tap, 32mm CP Brass

Waste & M.I. Fisher Union for wash basin etc.

complete. No 5.00 2078.58

DESCRIPTION UNIT QTY RATE AMOUNT

Providing, laying and constructing brick masonry

chamber for underground C. I. Inspection

Chamber with Inside Dimension 600mm x

850mm x 450mm dedo for single pipe line with

bends having crushing strength not less than

35Kg./Cm2 on C. M. (1:5) (1 cement, 5 Sand) C.

I. Cover with frame (light duty) of 455mm x

610mm internal dimension total weight of cover

with frame to be not less than 38.00 Kgs. (Wt. of

112.0 Cover 23 Kgs. and wt. of Frame 15 Kgs.) with

R.C.C. top slab with 1:2:4 (1 cement, 2 Coarse

sand, 4 graded stone (Kapachi) ) foundation

concrete 1:5:10 (1 cement, 5 Coarse sand,

brick bats of 40mm nominal size) inside plaster

15mm. thick with C. M. 1:3 (1 cement, 3 Coarse

sand) finished smooth with a floating coat of

neat cement slurry on walls and bed concrete

including curing etc. complete as directed by

Engineer-in-charge.

Providing erecting and fixing double coated ISI

water tank of required capacity each with all

necessary fittings and connection etc. complete

on terrace. Lit. 1000.00 3.95

Providing and laying (To level or slopes) and

jointing with stiff mixture of cement mortar in

114.0 proportion 1 : 1 salt glazed stone ware pipes

including testing of pipes and joint complete. (B)

Providing, laying and jointing in true line and

level 25 mm dia U.P.V.C. Pipe (SCH-40)

including fittings make as approved by Engineer

In Charge. Pipe shall be fixed on the wall with

the help of clamp at every two meter c/c. or shall

be concealed as directed including necessary

fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent,

including cost of all materials.

Providing, laying and jointing in true line and

level 15 mm dia U.P.V.C. Pipe (SCH-40)

including fittings make as approved by Engineer

In Charge. Pipe shall be fixed on the wall with

the help of clamp at every two meter c/c. or shall

be concealed as directed including necessary

fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent,

including cost of all materials.

Drilling of 200 / 215 mm dia. bore well in over

burden rocky or loose collapsible / boulder strata

& lowering of 175 / 200 mm dia. UPVC / PVC /

ERW casing pipe above 12 meters and up to

meters depth by DTH rig etc. complete.

DESCRIPTION UNIT QTY RATE AMOUNT

Drilling of 250 mm dia. bore well in all strata

including dual over burden strata by

118.0 Combination DR / DTH rig including lowering

200 mm dia MS ERW pipes in bore hole as

suggested by Hydrologist. Rmt. 122.00 1258.00

Manufacture, supply and delivery of ISI marked

ERW MS pipes conforming to IS: 4270/2001

119.0 with latest amendment. Rates are exclusive of

GST. 200 mm dia. (Minimum 6.00 mm thick).

MS Specials with Fittings (Elbows, Nipple, Step

120.0 Nipple, Union, Plug, Tee, Coupling, Reducer).

Manufacture, supply & delivery of ISI marked

UPVC Casing pipe IS 12818 with latest

amendment. (Rates are exclusive of GST).

200.00 mm nominal dia. " CM " Type. Rmt. 122.00 1444.00

PVC Fittings (Elbows, Nipple, Step Nipple,

Union, Plug, Tee, Coupling, Reducer). LS 2.00 8808.40

Supplying of following size of HEAVY UPVC

123.0 column pipe with coupler and wire lock. For

100mm Dia Pipe. Rmt. 244.00 1119.00

Clamp made from M.S. Plate with 3 holes other

side with nuts & bolts of std. Make and suitable

size (d) 450 x 65 x 10 mm flat suitable to

100/125mm dia pipe. per pair 4.00 687.07

Supply of best quality of well sorted sevaliya

gravel of size 4mm to 6mm cmt 0.864 2029.00

Supply of following size of TOP & BOTTOM

accessories i.e. Adaptor set (CI) long, pump

guard set, starter pipe Rubber ring for

126.0 submersible pump & UPVC column pipe as

directed by Engineer - in - charge with

necessary plumbing as desired. 100 mm dia.

Geohydrological ground water investigation

including vehicle charges. No 4.00 3571.00

S.I.T.C. submersible pump set for bore of

mm. dia. or more having 3 phase motor capacity

about 25 H.P. and discharge capacity having.

128.0 Lifting and Lowering taken extra. (6 Stage)

to 800 L.P.M. discharge at the head 84 to

mtrs. suitable for 80 mm dia. delivery pipe.

S.I.T.C. submersible pump set for bore of

mm. dia. or more having 3 phase motor capacity

about 30 H.P. and discharge capacity having.

129.0 Lifting and Lowering taken extra. (D) ( 5 Stage )

1150 to 1400 L.P.M. discharge. at the head

to 85 mtrs. suitable for 100 mm dia. delivery

pipe. sets 2.00 75848.00

DESCRIPTION UNIT QTY RATE AMOUNT

Lowering of submersible motor pump set at the

depth of following, complete with required. No

and size of casing pipes erected by means of

proper chain pulley block & pipe wrenches after

checking of threads of each pipe with coupling

to take the load of the pump set and pipe

assembly filled up with water. Above 60 mtrs.

and Up to 120 mtrs. No 4.00 2568.43

Supplying and erecting approved make 3 phase

motor control panel (ATS) made from 16 G.

CRCA sheet duly painted with epoxy power

paint inside and outside with hinged doors and

locking arrangement, consisting, of suitable

switch of AC 23 duty with HRC fuses (Cat.III),

starting and running contactors, overload relay,

Automatic water level controller, Electronic timer

with master timer CT operated Ammeter with

131.0 selector switch, Voltmeter with selector switch,

phase indicating lamps, single phasing

preventer , water level guard, over load, start,

run and stop push buttons, air cooled auto

transformer with 60%, 70%, 80% tapping, Panel

to be erected on angle iron frame grouted on

wall as directed., contactors relays, timer etc.

shall be of L & T Siemens / Cutler Hammer

make. Suitable for 25 H.P..

Supplying and erecting approved make 3 phase

motor control panel (ATS) made from 16 G.

CRCA sheet duly painted with epoxy power

paint inside and outside with hinged doors and

locking arrangement, consisting, of suitable

switch of AC 23 duty with HRC fuses (Cat.III),

starting and running contactors, overload relay,

Automatic water level controller, Electronic timer

with master timer CT operated Ammeter with

132.0 selector switch, Voltmeter with selector switch,

phase indicating lamps, single phasing

preventer , water level guard, over load, start,

run and stop push buttons, air cooled auto

transformer with 60%, 70%, 80% tapping, Panel

to be erected on angle iron frame grouted on

wall as directed., contactors relays, timer etc.

shall be of L & T Siemens / Cutler Hammer

make. Suitable for 30 H.P..

Providing and erecting ISI marked PVC

insulated PVC Sheathed Flat flexible

Submersible copper cable approved make of

following Size. 1 R x 3 C x 16.0mm2. Mtr. 200.00 488.84

Providing and erecting required size HOT deep

Galvanised iron strip for earthing of H.T. , OCB/

ACB/ Transformer LT panel board, Motors etc.

using proper clamp. Kg. 80.00 97.00

DESCRIPTION UNIT QTY RATE AMOUNT

Construction of chamber in brick or bela stone

masonry, locally available in C. M. 1:6.

Foundation concrete 150 mm thick in C. C. 1:4:8

of trap metal size 25 mm to 40 mm thick, inside

cement plaster in C. M. 1:3 and cement pointing

outside in C. M. 1:3 and top cover of precast

RCC slab 100 mm thick (with key hole in two

parts, each with handles or MS Bar etc.

complete as given size) Upto 1 Mt. depth from

G.L. to pipe invert level incl. complete civil works

but excl. cost of excavation and refilling, with

cast in situ RCC slab in one single piece with

fixing of CI-MH Frame and cover (excl. cost of

CI-MH Frame and cover) with 23 mm thick brick

masonry wall in C.M.1:6. With Precast Slab in

two parts 15 cm : Size of Chamber 0.90 x 0.90 x

Providing, supplying and delivery of CI Manhole

frame and cover incl. all taxes, loading,

unloading and carting upto departmental stores

etc. comp. Size 0.9 m. x 0.90 m. heavy duty -

ton capacity. All Type. CI Manhole Frame &

Cover. Kg. 200.00 58.00

Plywood designed with one side commercial and

other side teak finished 15mm. Thick Smt. 4.00 347.46

Box Cutting the road surface to proper slope

and camber for making a base for road work

139.0 including removing the excavated stuff and

depositing on the road side slope as directed

upto 50Mt. Lead. No 77.00 106.80

Providing and laying Controlled cement

concrete M 250 (1:1.5:3) and curing complete

excluding the cost of reinforcement for R.C.C

work in Road by Trimix method by providing and

Fixing 'C' channels of 75mm x 75mm as per

required level slope and thickness of concrete

road levelling of placed concrete with surface

140.0 vibrator finishing the surface with power floater

and trowel ligh brooming on the surface

including providing and filling expansion joint

having size 20mm x 20mm as per manufactures

specification and making construction joint 3mm

x 20mm by using concrete cutter machine etc.

complete as directed.

DESCRIPTION UNIT QTY RATE AMOUNT

Supply, installation, testing & commissioning of

Vertical Turbine pump motor set of specified

duty parameters & guaranteed efficiency of

following MOC with specified capacity vertical

solid shaft TEFC squirrel cage induction motor

(with minimum IE-3 efficiency class), working on

three phase AC supply with 50 Hz ± 3%, 415 V

± 10%, rated speed 1000 RPM along with

column and bowl assembly, discharge head,

base channel / RSJ etc. complete as per

relevant IS. M.O.C.: Impeller & Sealing Rings:

CF8M, Bowl & Suction Bell : Cast Steel WCB

Shaft with coupling: SS 410, Column Pipe: MS

ERW, Mechanical seal (above 30 kw), Base

Plate: MS, Line Bearing: Thordon, Suction

Strainer: S.S. - Polytechnic WW - 15 HP -

141.1 Ketki Baug WW - 15 HP - 11 KW Set 2.0 163658.00

141.2 Arts Faculty WW - 25 HP - 18.5 KW Set 2.0 275243.00

141.3 TKG Boys Hostel WW - 15 HP - 11 KW Set 2.0 163658.00

Providing & erecting open well horizontal mono

block pump set with cast iron body, complete for

three phase submersible motor having. [J] For

25 HP 3 phase open well horizontal mono block

pump set suitable for 1075 to 1850 LPM @ 36 to

60 MTR head suitable for 65 /80 mm dia

delivery pipe. Cat.II.

S.I.T.C. submersible pump set for bore of

mm. dia. or more having 3 phase motor capacity

about 25 H.P. and discharge capacity having .

143.0 Lifting and Lowering taken extra. (C) (6 Stage)

1000 to 800 L.P.M. discharge at the head 84 to

102 mtrs. suitable for 80 mm dia. delivery pipe.

Cat.III. Set 2.0 67344.00

S.I.T.C. submersible pump set for bore of

mm. dia. Or more having 3 phase motor capacity

about 20 H.P and discharge capacity having .

144.0 Lifting and Lowering taken extra.(B) (14 Stage)

650 to 550 LPM discharge at head 84 to

mtrs suitable for 65 mm dia. delivery pipe.

Cat.III. Set 2.0 60407.00