Loading…
Loading…
Tender Value
₹1.2 L
EMD Value
₹2,903
Closing Date
10 Jun 2026, 11:00 am4d left
ASSISTANT ENGINEER
ASSISTANT ENGINEER ELANTHOOR GP
241 ADDITIONAL FACILITIES TO KRISHIBHAVAN AT ELANTHOOR GP
2026_LSGD_853451_15
84/AE/LIDEW/ELTR
Open Tender
Civil Works - Roads
210 days
ELANTHOOR
Please refer Tender documents.
10 documents required · 10 mandatory
₹555
Yes
₹2,903
Yes
2 Jun 2026
2 Jun 2026
11 Jun 2026
2 Jun 2026
10 Jun 2026
2 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1maintenance | ||||||
| 1.001 | 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil | - | cum | - | - | BI01010001010000000000000515BI0100001114 |
| 1.002 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | - | cum | - | - | BI01010001010000000000000515BI0100001115 |
| 1.003 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 0.4 | kg | - | - | BI01010001010000000000000515BI0100001116 |
| 1.004 | OD4456/2026-2027:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required | 1 | sqm | - | - | BI01010001010000000000000515BI0100001117 |
| 1.005 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | - | kg | - | - | BI01010001010000000000000515BI0100001118 |
| 1.006 | OD16999/2026-2027:Supplying and fixing 25x25x10g or nearest available size GI welded mesh and applying a coat of Primer including all charges etc.complete | 1 | sqm | - | - | BI01010001010000000000000515BI0100001119 |
| 1.007 | OD17002/2026-2027:Supplying and fixing 150mm PVC rain water gutter,Semicircular section including fittings with 32x5mm flat supports at 1m interval etc. complete | 1 | metre | - | - | BI01010001010000000000000515BI0100001120 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.37 MB
Tendernotice_2.pdf
PDF • 0.26 MB
Tendernotice_3.pdf
PDF • 0.25 MB
Tendernotice_4.pdf
PDF • 0.26 MB
Tendernotice_5.pdf
PDF • 0.25 MB
Tendernotice_6.pdf
PDF • 0.28 MB
241SBD.pdf
Tender Documents • 1.69 MB
BOQ_1442614.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid