OPEN TENDER FOR LAYING OF UNDERGROUND CABLE REALATED WORKS AT VARIOUS LOCATION UNDER BAYAD, SATHAMBA & CHOILA SDN UNDER TALOD DO.

Description Unit Quantity Amount in

No. Unit in Rs.

Laying (including installation, testing and

commissioning) of various size of Single circuit

11 KV XLPE insulated Alluminum armoured Cable

in ground 1200 mm deep and 300 mm wide

trench, providing sand cushioning below (75 mm

thick layer of sand) and above (75 mm thick

layer of sand) of the cable and covering it with

RCC half round Hume pipe (150 mm inner

1 diameter with thickness of 30 mm and One MTR 250 335

meter in length) before refilling pre-bonding

tap/warning tap should provide below 700 mm

from the ground level and back filling the same

to make ground level as per original. As per

specification and drawing of UGVCL. (RCC half

round pipe should be provide throughout on

cable without gap). Only Cable will be supplied

Laying (including installation, testing and

commissioning) of various size of Double circuit

11 KV XLPE insulated Aluminum armoured Cable

in ground in single trench 1200 mm deep and

500 mm wide trench, providing sand cushioning

below (75 mm thick layer of sand) and above (75

mm thick layer of sand) of the cable and

covering it with RCC half round Hume pipe (150

2 mm inner diameter with thickness of 30 mm and MTR 250 468

One meter in length) before refilling pre-bonding

tap/warning tap should provide below 700 mm

from the ground level and back filling the same

to make ground level as per original. As per

specification and drawing of UGVCL. (RCC half

round pipe should be provide throughout on

cable without gap). Only Cable will be Supplied

Laying of various size of 11 KV XLPE insulated

3 Aluminium armoured cable above ground in air MTR 150 38

for termination of cable on pole as per site

Signature of Tenderer Company’s Round Seal Page 1 of

Place: Signature of Tenderer Date:

Save Energy for Benefit of Self and Nation

condition and instruction of engineer in charge (

Excluding cost of clamp and pipe )ground level as

per original. As per specification and drawing of

UGVCL(RCC half round pipe should be provide

throughout in cable without gap, Only cable will

be supplied by UGVCL

Supply and installation for set of clamps of

clamps made from 50*6 mm GI flat ( Min weight

of flat 1.6 KG per set) for fitting for 110mm

GI/HDPE pipe above ground with the pole ( with

cost of nuts & bolts)

Supply and installation for set of clamps of

clamps made from 50 x6 mm GI flat ( Min weight

of felt 1.8 KG per set) for fitting for 160mm

GI/HDPE pipe above ground with the pole ( with

cost of nuts & bolts)

Laying of various sizes of 11 kv XLPE insulated

Aluminium armoured cable in cable tray/trench

6 over / below the ground level( Excluding cable MTR 120 150

tray, only labour charges)

Laying of HDPE pipe confirming to IS

4984:1955(Amendment no.2) having diameter

110 mm and minimum thickness 5mm at a

minimum depth of 1200mm below the road

surface by push through method by drilling the

road with HDD machine/manualy without

breking the road surface and laying of nay size of

HT/LT XLPE insulated aluminum the duct as per

the instruction of EIC and specifications (without

cost of HDPE pipe,cable will be supplied by

Supply of HDPE pipe having 110/120 mm

diameter (As required), minimum thickness

mm as per IS ( Amendment no.2 IS 4894:1995)

for laying of PE 100,6kg/cm2 for 11 kc XLPE

Signature of Tenderer Company’s Round Seal Page 2 of

Place: Signature of Tenderer Date:

Save Energy for Benefit of Self and Nation

Supply and Fixing of medium grade GI pipe of

size of 110 mm Diameter (Min 2.5 meter

required) Weight 9 to 10 kg/Mtr.

Indoor application: HT push on/heat shrinktype

end termination preferably for at switchgear end

boxes, transformer(PAD/Pole mounted) for

core 185 Sq mm11 kV XLPE Aluminium

Conductor Armoured cable as specified with

connection of leadsincluding cutting, stripping of

cable, insulations, providing compression type

terminals,crimping of lugs with suitable crimping

tool. ( As per Technical Specification)

Indoor application: HT push on/heat shrink type

end termination preferably for at switchgear end

boxes, transformer( PAD/Pole mounted) for

core 240 Sq mm 11 kV XLPE Aluminium

Conductor Armoured cable as specified with

connection of leads including cutting, stripping

of cable, insulations, providing compression type

terminals, crimping of lugs with suitable

crimping tool. ( As per Technical Specification)

Provinding and fixing HT push on/heat shrink

type end outdoor termination kit of

3M/Raychem/Frontier/Yamuna make at

switchgear end boxes, transformer (PAD/Pole

mounted) for 3 core 11 KV XLPE Aluminium

Conductor Armoured cable as specifield with

connection of leads including cutting, stripping

of cable , insulationas, providing compression

type terminal, crimping of lugs with suitable

crimping tool, outdoor application(120/150/185

mm2 HT XLPE Cable)

Provinding and fixing HT push on/heat shrink

type end outdoor termination kit of

3M/Raychem/Frontier/Yamuna make at

switchgear end boxes, transformer (PAD/Pole

mounted) for 3 core 11 KV XLPE Aluminium

Conductor Armoured cable as specifield with

connection of leads including cutting, stripping

of cable , insulationas, providing compression

Signature of Tenderer Company’s Round Seal Page 3 of

Place: Signature of Tenderer Date:

Save Energy for Benefit of Self and Nation

type terminal, crimping of lugs with suitable

crimping tool, outdoor application(240mm2 HT

Provinding and fixing HT push on/heat shrink Nos.

type Straight joint

3M/Raychem/Frontier/Yamuna make for 3 core

11 KV XLPE Aluminium Conductor Armoured

cable as specifield with connection of leads

including cutting, stripping of cable, insulations,

providing compression type terminals, crimping

of luges with suitable crimping tool.

(120/150/185 mm 2 HT XLPE Cable)

Provinding and fixing HT push on/heat shrink Nos.

type Straight joint

3M/Raychem/Frontier/Yamuna make for 3 core

11 KV XLPE Aluminium Conductor Armoured

cable as specifield with connection of leads

including cutting, stripping of cable, insulations,

providing compression type terminals, crimping

of luges with suitable crimping tool. (240 mm

Provinding and fixing of Route Marker of CC

1:2:4, 150mm*150mm*750mm concrete stone

embedded in earth atleast 300mm below the GI

and 450mm above GI at distance of

approximately 100 mtr or as directed by

engineer in charge The route marker must be

painted with yellow colour of stone with red

colour for embracing on stone UGVCL 11 KV

Supplying & Erecting of maintaince free

earthingSystem comprising of 17.2mm dia 3mtr

Long earthing electrode of low carbon steel

electrodewith 250 micrns copper coating on

cable armour as per specifications.

Supply installation & commissioning of

earthingconductor 25x3 mmG.I. strip for pole

mountedtransformer and upto FSP,RMU as well

as connection to be made To the earth pit. Rates

Signature of Tenderer Company’s Round Seal Page 4 of

Place: Signature of Tenderer Date:

Save Energy for Benefit of Self and Nation

inclusive of hot dipped hard wares & cable

FRP Clamp for cable

FRP Clamp for Pipe

Cable Climbing on pole

22 Welfare Cess @ 1% of Estimated Cost Each 1 25171.99

TOTAL AMOUNT OF TENDER (In Rs.)

TOTAL AMOUNT OF TENDER (In Rs.)

EXECUTIVE ENGINEER

UGVCL, TALOD DO

Signature of Tenderer Company’s Round Seal Page 5 of

Place: Signature of Tenderer Date: